QSPI IO0=P0.30 and IO2=P0.28 are wired to joystick LEFT and UP on this
board. QSPI init configures those pins as OUTPUT, blocking button reads.
Disable QSPIFLASH so the joystick works; firmware falls back to internal
flash storage.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The splash shows the upstream base version from the hardcoded MESHCORE_VERSION
build flag (distinct from FIRMWARE_VERSION, which is our solo version). The
upstream merge bumped FIRMWARE_VERSION to v1.16-solo.0 but left this flag at
1.15. Update all three occurrences (wio + eink) to 1.16.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add lib/GxEPD2-patch/src/GxEPD2_BW.h: local patched copy of GxEPD2_BW.h
that exposes getBuffer()/getBufferSize() under ENABLE_SCREENSHOT guard.
Include guard (_GxEPD2_BW_H_) prevents double-inclusion of the installed
library version.
- GxEPDDisplay.h: use patched header via relative include when
ENABLE_SCREENSHOT so the patch takes precedence over the installed lib
(PlatformIO adds library paths before -I build_flags).
- DisplayDriver.h: add virtual getBuffer()/getBufferSize()/getDisplayType()
defaults (nullptr/0/0) under ENABLE_SCREENSHOT.
- SH1106Display.h / SSD1306Display.h / GxEPDDisplay.h: add concrete overrides;
getDisplayType() returns 0 (OLED) or 1 (e-ink).
- MyMesh.cpp/h: replace fragile C-cast with virtual dispatch in
handleScreenshotRequest(); extend 5-byte header to 6 bytes by appending
display_type so the host tool can decode the correct pixel layout.
- tools/screenshot.py: parse 6-byte header; add eink_buffer_to_image()
that decodes the row-major MSB-first GxEPD2 buffer with DISPLAY_ROTATION=1
(phys_x = 127-ly, phys_y = lx); dispatch on display_type.
- variants/wio-tracker-l1-eink/platformio.ini: add
[env:WioTrackerL1Eink_companion_dual_dev] with ENABLE_SCREENSHOT.
- variants/wio-tracker-l1/platformio.ini: unchanged (OLED env already exists).
Builds verified: WioTrackerL1Eink_companion_dual_dev SUCCESS,
WioTrackerL1Eink_companion_radio_ble SUCCESS (unaffected).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.
*Background on change:*
This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.
This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!
RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)
Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.
At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.
This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so
the adafruit path also can at least show accurate values instead
of looping negative.
Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps.
*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
flash; written only when iaqAccuracy improves to >= 2, should
keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
mismatch in Bosch's PlatformIO packaging, silly Bosch
One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.
This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.
This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.
*Tests:*
- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
Add MESHCORE_VERSION build flag ("1.15") to companion base configs.
Splash screen now shows MESHCORE_VERSION in the large text and the
plus firmware version (stripped of commit hash) in the Plus bar,
e.g. "1.15" large + "Plus v1.11 for Wio" below.
Change CI tag pattern to v* and simplify version extraction so tag
v1.11 maps directly to FIRMWARE_VERSION=v1.11.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Rename WioTrackerL1_companion_radio_dual_settings → WioTrackerL1_companion_dual
and WioTrackerL1Eink_companion_radio_dual → WioTrackerL1Eink_companion_dual.
Fix CI workflow: remove hardcoded branch refs so both build jobs check out
the tagged commit; add version extraction to each build job (previously
GIT_TAG_VERSION was only set in the release job, leaving FIRMWARE_VERSION
empty during builds); update build commands to use new env names.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Display rotation is now a runtime setting (Settings → Rotation), so separate
build targets for landscape/portrait are redundant. Collapsed four envs into two:
WioTrackerL1Eink_companion_radio_ble — BLE only
WioTrackerL1Eink_companion_radio_dual — BLE + USB (DUAL_SERIAL)
Default DISPLAY_ROTATION=1 (landscape, 250×122) moved to the shared base
section; users adjust orientation via the in-app Settings screen.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove fixed 128×128 virtual space and scaling; use 1:1 pixel mapping
- Display dimensions derived from panel native size + DISPLAY_ROTATION
- setCursor compensates for GFX font baseline offset (ascender per font size)
- Add getLineHeight() / getCharWidth() overrides for FreeSans fonts
- New envs: landscape (250×122) and portrait (122×250), BLE and dual variants
- Integrate all wio-tracker-l1-improvements features into e-ink build
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DualSerialInterface: guard writeFrame/isWriteBusy/isBLEConnected with
_ble_enabled to avoid BLE-after-disable race
- NearbyScreen: initialize all fields in constructor; promote D_* layout
constants to class scope; clamp _dscroll on result count change;
replace hardcoded 2 with D_VISIBLE in scroll logic; allow re-scan
from detail view via KEY_CONTEXT_MENU/KEY_ENTER
- variant.cpp: fix inconsistent indentation in initVariant()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DualSerialInterface: enable()/disable() control BLE only, USB always on;
USB state machine not read while BLE connected to avoid partial-frame
corruption; reset USB on BLE disconnect for clean reconnect
- Fix -UBLE_DEBUG_LOGGING (no space) to avoid PlatformIO SCons parse error
- build.sh: drop separate USB/BLE builds, dual_settings only
- wio-tracker-l1-eink: enable DUAL_SERIAL in companion_radio_ble build
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BLE takes priority when connected; USB is always ready as fallback.
Both state machines run continuously — no BLE disconnect on USB connect.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble
environment. The presence of BLE_PIN_CODE prevents the unit from operating as a
USB companion. Commenting it out allows dynamic PIN generation and enables USB
companion functionality.
Moved UI_HAS_JOYSTICK_UPDOWN=1 from _settings-only variants to the
WioTrackerL1CompanionBLE and WioTrackerL1CompanionUSB base configs.
The hardware always had the up/down buttons; the flag was only in
_settings as a temporary testing boundary.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UI_SENSORS_PAGE=1 activates the existing sensor display screen in
HomeScreen — shows temperature, pressure, humidity, voltage and other
LPP-formatted sensor data from connected I2C sensors (BME280, etc.).
BME280 support is already included via sensor_base build flags.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add FIRMWARE_PLUS_BUILD compile flag to both companion sections in
platformio.ini. When set, SplashScreen shows "+ unofficial build" in
yellow below the build date. Avoids runtime string parsing — the
existing version stripping logic (cuts at first dash) is unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
