Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed
in with the shared upstream board configs (repeater, room server, plain
companion) that every MeshCore fork carries. Split them out into their own
top-level solo/<board>/ folder -- each still `extends` the board base defined
in its original variants/<board>/platformio.ini, just no longer interleaved
with it file-wise.
- platformio.ini: extra_configs picks up solo/*/platformio.ini alongside
variants/*/platformio.ini.
- build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of
variants/ (the release matrix is unchanged -- same 8 envs, same names).
- pr-build-check.yml: solo/** added to the trigger paths.
- GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a
strict superset (BLE still works, plus USB), and every other board only
ever had one solo build to begin with.
- GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to
match. No comment anywhere recorded whether this board's USB data lines
are actually broken out to a connector -- DUAL_SERIAL compiles and works
over BLE regardless, so worst case the USB half goes unused.
- Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set
it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in
the old ui-tiny UITask, never ui-new, which every solo build (these
included) uses -- it did nothing on any of them. Left alone everywhere
else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or
the flag is legitimately read); out of scope here.
- Added docs/solo_features/build_flags.md: every optional -D flag a solo
build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/
vibration, GPS switch, display/battery tuning), verified against the code
rather than the existing per-board comments, with what's already baked
into every solo build kept separate from what's opt-in.
- README: doc index + Building from source section link to the new page;
path references to the moved solo files updated to solo/<board>/.
All 8 solo_dual envs rebuilt clean after the move; native test suite (40
cases) unaffected.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Select nodes had this flag enabled, testing by the community
and hardware specs indicate this can be enabled global for all
node types using this chipset.
Any nodes down the line that may be quirky can be individually
disabled with `-U USE_CC310_HW_CRYPTO`.
The new test_kiss_modem suite needs KissModem headers and sources that
only native_kiss_modem provides. Scope native to test_utils and run both
envs in the unit test workflow.
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
hasSeen() was simultaneously a predicate and a mutator — it inserted the
packet hash on every miss, making five call sites that only wanted to mark
a packet as sent call it with the return value discarded.
Split into:
- wasSeen() — pure predicate, no side effects
- markSeen() — explicit insert
All query sites now call markSeen() immediately after wasSeen() returns
false, preserving identical runtime behaviour. The five mark-only send
sites (sendFlood, sendDirect, sendZeroHop x2) now call markSeen directly.
Also fixes three bridge sites (BridgeBase, ESPNowBridge, RS232Bridge)
that had the same query+implicit-insert pattern.
Tests: add test/test_mesh_tables/ covering wasSeen purity, markSeen,
dup stats, and clear. Update SHA256 mock to produce deterministic output
(previously finalize() was a no-op). Add Packet.cpp to native build filter.
Patches Bluefruit library to fix semaphore leak bug that causes device lockup
when BLE central disconnects unexpectedly (e.g., going out of range, supervision timeout).
Co-authored-by: Liam Cottle <liamcottle@users.noreply.github.com>
Co-authored-by: oltaco <oltaco@users.noreply.github.com>
it seems that if the LR1110 radio hears a packet corrupted in a specific way, it'll report a packet of 0 length and with the header error IRQ set. every packet received afterwards will then be shifted to the right by 4 bytes on top of the radio's reported offset. this can occur multiple times with the shift increasing by 4 bytes each time. thus, this patch will read from an additional offset after hearing the trigger packet.
transmitting seems to reset the shift - unsure exactly what operation resets it but standby() is called after tx so patch assumes shift is 0 after standby(). more investigation may be needed here.
JakubandClaude Sonnet 5
taco
ripplebizandGitHub
Nick Dunklee
ViezeVingertjes
liamcottle
Christoph Koehler
Florent
Rastislav Vysoky
Michael Lynch
Petr Kracik
Andy ShinnandGitHub
Wessel Nieboer
Winston Lowe
Wesley Ellis
Woodie-07
João Brázio
Scott Powell