; Solo build for ProMicro (nRF52840) -- extends the board base defined in
; variants/promicro/platformio.ini. Solo configs live in their own top-level
; solo/ folder, separate from the shared upstream board variants in variants/,
; so this repo's Solo-specific additions don't get mixed in with configs
; other MeshCore forks/upstream also carry.
;
; Full on-device UI, with CardKB support: CardKB shares the board's primary
; I2C bus (already used by the OLED display / RTC) instead of a dedicated
; second bus -- the default Wire1 pins on this variant (D13/D14) physically
; collide with the LoRa SPI bus (P_LORA_NSS=13, P_LORA_MOSI=14), and no other
; free GPIO pair is broken out on this board for a second dedicated bus. Do
; NOT define ENV_PIN_SDA/ENV_PIN_SCL here -- that would bring up a real Wire1
; on the colliding pins instead.
[env:ProMicro_companion_solo_dual]
extends = Promicro
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
; -Ofast (the core's default) doesn't fit a feature-complete solo build;
; -Os fits with headroom.
build_unflags = -Ofast
build_flags = ${Promicro.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D BLE_PIN_CODE=123456
  -D DUAL_SERIAL=1
  -D OFFLINE_QUEUE_SIZE=256
  -D DISPLAY_CLASS=SSD1306Display
  -D FIRMWARE_SOLO_BUILD=1
  -D UI_SENSORS_PAGE=1
  -D ENABLE_SCREENSHOT
  -Os
  ; CardKB on the shared primary bus (D8=SDA / D7=SCL on this board).
  -D CARDKB_I2C=Wire
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Promicro.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/nrf52/SerialBLEInterface.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps = ${Promicro.lib_deps}
  adafruit/RTClib @ ^2.1.3
  densaugeo/base64 @ ~1.4.0