#pragma once
#include <cstdint> // For uint8_t, uint32_t

#define TELEM_MODE_DENY            0
#define TELEM_MODE_ALLOW_FLAGS     1     // use contact.flags
#define TELEM_MODE_ALLOW_ALL       2

#define ADVERT_LOC_NONE       0
#define ADVERT_LOC_SHARE      1

struct NodePrefs {  // persisted to file
  float airtime_factor;
  char node_name[32];
  float freq;
  uint8_t sf;
  uint8_t cr;
  uint8_t multi_acks;
  uint8_t manual_add_contacts;
  float bw;
  int8_t tx_power_dbm;
  uint8_t telemetry_mode_base;
  uint8_t telemetry_mode_loc;
  uint8_t telemetry_mode_env;
  float rx_delay_base;
  uint32_t ble_pin;
  uint8_t  advert_loc_policy;
  uint8_t  buzzer_quiet;
  uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
  uint32_t gps_interval;     // GPS read interval in seconds
  uint8_t autoadd_config;    // bitmask for auto-add contacts config
  uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
  uint8_t client_repeat;
  uint8_t path_hash_mode;    // which path mode to use when sending
  uint8_t autoadd_max_hops;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
  char default_scope_name[31];
  uint8_t default_scope_key[16];
  uint8_t display_brightness;   // 0=min..4=max, default 2 (medium)
  uint16_t auto_off_secs;       // display auto-off: 0=never, else seconds (default 15)
  int8_t tz_offset_hours;       // timezone offset from UTC, -12..+14 (default 0)
  uint16_t low_batt_mv;         // auto-shutdown threshold: 0=disabled, 3000-3500 mV
  uint8_t batt_display_mode;   // 0=icon, 1=percent, 2=voltage
  char custom_msgs[10][140];   // user-defined quick messages (supports {loc}, {time})
  uint64_t ch_notif_override;  // bitmask: bit i = channel i has explicit notification setting
  uint64_t ch_notif_muted;     // bitmask: bit i = channel i muted (only if override bit set)
  uint8_t  dm_show_all;        // 0=favourites only (default), 1=all chat contacts
  uint8_t  room_fav_only;      // 0=all room servers (default), 1=favourites only
};