[Heltec_lora32_v3]
extends = esp32_base
board = esp32-s3-devkitc-1
build_flags =
  ${esp32_base.build_flags}
  ${sensor_base.build_flags}
  -I variants/heltec_v3
  -D HELTEC_LORA_V3
  -D ESP32_CPU_FREQ=80
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=8
  -D P_LORA_RESET=RADIOLIB_NC
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
  -D USE_SX1262
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_TX_LED=35
  -D PIN_BOARD_SDA=17
  -D PIN_BOARD_SCL=18
  -D PIN_USER_BTN=0
  -D PIN_VEXT_EN=36
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=47
  -D PIN_GPS_TX=48
  -D PIN_GPS_EN=26
build_src_filter = ${esp32_base.build_src_filter}
  +<../variants/heltec_v3>
  +<helpers/sensors>
lib_deps =
  ${esp32_base.lib_deps}
  ${sensor_base.lib_deps}

[env:Heltec_v3_repeater]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"Heltec Repeater"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_v3_repeater_bridge_rs232]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"RS232 Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_RS232_BRIDGE=Serial2
  -D WITH_RS232_BRIDGE_RX=5
  -D WITH_RS232_BRIDGE_TX=6
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/RS232Bridge.cpp>
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_repeater_bridge_espnow]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"ESPNow Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_ESPNOW_BRIDGE=1
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/ESPNowBridge.cpp>
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_room_server]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"Heltec Room"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ROOM_PASSWORD='"hello"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_room_server>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_terminal_chat]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_secure_chat/main.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_companion_radio_usb]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_companion_radio_ble]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=SSD1306Display
  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
  -D AUTO_SHUTDOWN_MILLIVOLTS=3400
  -D BLE_DEBUG_LOGGING=1
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

; Solo build: the full standalone on-device UI (message history, contacts, map,
; tools) rather than a screen that only mirrors the phone app. Dual transport --
; the companion app can attach over BLE or USB serial, whichever it finds, and
; BLE wins while both are live.
;
; This firmware needs a real input device: the solo UI cannot be driven from the
; PRG button alone. Both supported ones are wired up in target.cpp and enabled
; below, so either is enough on its own and having both is fine. The pins are
; defaults picked from what this board leaves free -- change them to match how
; the device is actually built. Pins with nothing attached read as not-pressed,
; so the unused half costs nothing.
;
;  * CardKB (M5Stack I2C keyboard, addr 0x5F) on a second I2C bus. Any two free
;    GPIOs -- NOT 17/18, the OLED already owns those on Wire. It's probed at
;    boot, so a build with these set still runs fine with nothing plugged in.
;    Pair it with Settings > Keyboard > Ext. KB = Compact, which is designed to
;    need no joystick at all. The same bus is scanned for environment sensors.
;
;  * Wired joystick: four direction pins plus a separate Back button -- the UI
;    uses Back unconditionally once UI_HAS_JOYSTICK is set, so it isn't optional.
;    PIN_USER_BTN (PRG) stays the centre/Enter press. Each contact just shorts
;    its pin to GND; target.cpp enables the internal pull-ups. Drop
;    UI_HAS_JOYSTICK_UPDOWN for a left/right-only stick. JOYSTICK_ROTATION (0-3)
;    rotates the mapping if the stick is mounted sideways -- it's also a runtime
;    setting, so leave it out unless you want a different default.
;    Comment the whole block out for a CardKB-only build. UI_HAS_JOYSTICK
;    replaces the single-button handling rather than adding to it (UITask.cpp
;    dispatches on '#if UI_HAS_JOYSTICK ... #elif defined(PIN_USER_BTN)'), which
;    costs nothing here -- that fallback only feeds KEY_NEXT/KEY_PREV, which the
;    solo screens don't act on.
;
; V3 and V4 are pin-compatible per Heltec's own docs, so the defaults below are
; carried over from the heltec_v4_companion_solo_dual env, where this exact
; CardKB + joystick combination is confirmed working on real hardware -- still
; worth checking against your own V3 module before soldering, but not a blind
; guess like the earlier SDA 41/SCL 42 default was. PIN_GPS_RX=47/TX=48/EN=26
; above are dead defines on V3 (ENV_INCLUDE_GPS is never set to 1 in this file),
; so they don't conflict with reusing 47/48 here despite the name.
[env:Heltec_v3_companion_solo_dual]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=SSD1306Display
  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
  -D DUAL_SERIAL=1         ; companion app over BLE *or* USB serial
  -D AUTO_SHUTDOWN_MILLIVOLTS=3400
  -D OFFLINE_QUEUE_SIZE=256
  -D FIRMWARE_SOLO_BUILD=1
  -D UI_SENSORS_PAGE=1
  -D OLED_MISC_FIXED_FONT=1   ; full Latin/Greek/Cyrillic 6x9 font, ~14 KB flash
  ; CardKB on the second I2C bus. Harmless with nothing plugged in.
  -D ENV_PIN_SDA=3
  -D ENV_PIN_SCL=4
  ; Wired joystick — comment the block out for a CardKB-only build.
  -D UI_HAS_JOYSTICK=1
  -D UI_HAS_JOYSTICK_UPDOWN=1
  -D JOYSTICK_UP=23
  -D JOYSTICK_DOWN=6
  -D JOYSTICK_LEFT=47
  -D JOYSTICK_RIGHT=48
  -D PIN_BACK_BTN=33
;  -D PIN_BUZZER=<gpio>
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/ui/buzzer.cpp>
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0
  end2endzone/NonBlockingRTTTL@^1.3.0

[env:Heltec_v3_companion_radio_wifi]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=SSD1306Display
  -D WIFI_DEBUG_LOGGING=1
  -D WIFI_SSID='"myssid"'
  -D WIFI_PWD='"mypwd"'
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_sensor]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec v3 Sensor"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ENV_PIN_SDA=33
  -D ENV_PIN_SCL=34
  -D DISPLAY_CLASS=SSD1306Display
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_sensor>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_WSL3_repeater]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Repeater"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_repeater_bridge_rs232]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"RS232 Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_RS232_BRIDGE=Serial2
  -D WITH_RS232_BRIDGE_RX=5
  -D WITH_RS232_BRIDGE_TX=6
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/RS232Bridge.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_repeater_bridge_espnow]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"ESPNow Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_ESPNOW_BRIDGE=1
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/ESPNowBridge.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_room_server]
extends = Heltec_lora32_v3
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_room_server>
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Room"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ROOM_PASSWORD='"hello"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_WSL3_companion_radio_ble]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D BLE_PIN_CODE=123456
  -D BLE_DEBUG_LOGGING=1
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_companion_radio_usb]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_companion_radio_wifi]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D WIFI_DEBUG_LOGGING=1
  -D WIFI_SSID='"myssid"'
  -D WIFI_PWD='"mypwd"'
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_sensor]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Sensor"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_sensor>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_kiss_modem]
extends = Heltec_lora32_v3
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/kiss_modem/>