; Seeed Wio Tracker L2 - Wio-S3 module: ESP32-S3R8 + SX1262
; Board layer ported from meshcore-dev/MeshCore PR #3381 (Hacuchino-hash), whose
; pin map was derived from Seeed's Meshtastic support branch (meshtastic/firmware
; PR #10909 + device-ui `wio-l2` branch). Pre-release hardware: verify the pin
; map against a real unit.
[Wio_Tracker_L2]
extends = esp32_base
board = seeed_wio_tracker_l2
; Native USB-Serial/JTAG: the baud rate is virtual (no effect on transfer
; speed); staying at the ROM's 115200 skips esptool's post-stub baud switch,
; one less step to fail on a marginal USB link.
upload_speed = 115200
build_flags = ${esp32_base.build_flags}
  ${sensor_base.build_flags}
  -I variants/wio-tracker-l2
  -D SEEED_WIO_TRACKER_L2
  -D PIN_BOARD_SDA=47
  -D PIN_BOARD_SCL=48
  -D PIN_USER_BTN=0
  -D USE_SX1262
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_NSS=21
  -D P_LORA_RESET=7
  -D P_LORA_BUSY=8
  -D P_LORA_DIO_1=9
  -D P_LORA_SCLK=4
  -D P_LORA_MISO=5
  -D P_LORA_MOSI=6
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D ENV_INCLUDE_GPS=1
  -D PIN_GPS_TX=18 ; L76K TX -> ESP32 RX
  -D PIN_GPS_RX=17 ; L76K RX <- ESP32 TX
  -D GPS_BAUD_RATE=9600
  ; ES8311 codec (I2C 0x18) -> class-D amp (power on expander P12) -> speaker.
  ; A frontend opts in with -D PIN_BUZZER=-1 -D BUZZER_I2S (genericBuzzer's
  ; I2S path, src/helpers/ui/buzzer.cpp) and +<helpers/ui/buzzer.cpp>.
  -D PIN_I2S_MCLK=10
  -D PIN_I2S_BCK=11
  -D PIN_I2S_WS=12
  -D PIN_I2S_DOUT=16
  -D BUZZER_CODEC_ES8311=0x18
  -D ENV_SKIP_GPS_DETECT=1 ; GPS is always present, powered via IO expander
  ; disable ALL env sensor I2C probes: this bus carries six onboard chips
  ; (TCA9535 0x21, AW35615 0x22, LP5814 0x2C, ADS1115 0x48, GT911 0x5D,
  ;  ES8311 0x18) and stray probe matches can hang sensors.begin()
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D ENV_INCLUDE_LPS22HB=0
build_src_filter = ${esp32_base.build_src_filter}
  +<../variants/wio-tracker-l2>
  +<helpers/sensors/*.cpp>
lib_deps =
  ${esp32_base.lib_deps}
  ${sensor_base.lib_deps}
  lovyan03/LovyanGFX @ ^1.2.30   ; >=1.2.30 defines Panel_NV3031B::init_cmds itself (PR #3381 needed an ODR fix for older)

[env:Wio_Tracker_L2_repeater]
extends = Wio_Tracker_L2
build_flags =
  ${Wio_Tracker_L2.build_flags}
  -D ADVERT_NAME='"WioL2 Repeater"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
build_src_filter = ${Wio_Tracker_L2.build_src_filter}
  +<../examples/simple_repeater/*.cpp>
lib_deps =
  ${Wio_Tracker_L2.lib_deps}
  ${esp32_ota.lib_deps}