; Solo build for Seeed Wio Tracker L2 -- extends the board base defined in
; variants/wio-tracker-l2/platformio.ini. Solo configs live in their own
; top-level solo/ folder, separate from the shared upstream board variants.
;
; BRING-UP ONLY: this env runs the existing ui-new (OLED-era, joystick-driven)
; UI zoomed 2x (160x120 logical on the 320x240 panel) purely to compile-test
; and smoke-test the board layer -- display, radio, GPS, battery. It has no
; touch input yet; the only control is the BOOT button. The real interface for
; this board is the planned LVGL frontend over a shared UI Core.
;
; Deliberately NOT named *_solo_dual yet, so build-solo-firmwares.yml doesn't
; publish it as a release artifact.
[env:Wio_Tracker_L2_companion_solo_bringup]
extends = Wio_Tracker_L2
build_flags =
  ${Wio_Tracker_L2.build_flags}
  -I examples/companion_radio/ui-new
  -D DISPLAY_CLASS=WioTrackerL2Display
  -D UI_ZOOM=2
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D BLE_PIN_CODE=123456
  -D DUAL_SERIAL=1
  -D OFFLINE_QUEUE_SIZE=256
  -D FIRMWARE_SOLO_BUILD=1
  -D MESHCORE_VERSION='"1.17.1"'
  -D OLED_MISC_FIXED_FONT=1
  -D AUTO_OFF_MILLIS=60000
build_src_filter = ${Wio_Tracker_L2.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<helpers/ui/LGFXDisplay.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Wio_Tracker_L2.lib_deps}
  densaugeo/base64 @ ~1.4.0

; ui-lvgl: the real L2 interface -- LVGL 9 frontend over the shared UI Core
; (docs/solo/developer/ui-core.md, step 5), on Arduino-ESP32 3.3.12 / ESP-IDF 5.5
; (pioarduino). *_solo_lvgl envs are published by build-solo-firmwares.yml
; (merged image + the -ota.bin that Settings > Firmware update installs).
[env:Wio_Tracker_L2_companion_solo_lvgl]
extends = Wio_Tracker_L2
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.312-1/platform-espressif32.zip
; USB through TinyUSB, not the chip's USB-Serial/JTAG: the serial port stays
; (CDC, reset-to-flash by the 1200 bps touch) and the SD card can be lent to
; a computer as a USB drive (ui-lvgl/LvglPort.h). A firmware that crashes
; early may need BOOT held over reset to flash.
build_unflags = -DARDUINO_USB_MODE=1
build_flags =
  ${Wio_Tracker_L2.build_flags}
  -D ARDUINO_USB_MODE=0
  -I examples/companion_radio/ui-lvgl
  -D DISPLAY_CLASS=WioTrackerL2Display
  -D UI_ZOOM=1
  -D LV_CONF_INCLUDE_SIMPLE
  -D MAX_CONTACTS=350
  -D MAX_GROUP_CHANNELS=40
  -D BLE_PIN_CODE=123456
  -D DUAL_SERIAL=1
  -D OFFLINE_QUEUE_SIZE=256
  -D FIRMWARE_SOLO_BUILD=1
  -D MESHCORE_VERSION='"1.17.1"'
  -D AUTO_OFF_MILLIS=60000
  -D MESH_IN_PSRAM=1   ; frees ~120 KB internal RAM for WiFi/TLS map downloads
  -D PIN_BUZZER=-1     ; no piezo pin: the speaker plays through the codec
  -D BUZZER_I2S
  -D OTA_ASSET_SUFFIX='"-Wio-Tracker-L2-ota.bin"'   ; Settings > Firmware update
  ; Sized for the PSRAM (UiCore is heap-allocated, so these land there);
  ; the defaults in the headers are the nRF52 boards'.
  -D TRAIL_CAPACITY=4096   ; 64 KB (+64 KB of map drawing buffers)
  -D WAYPOINT_CAPACITY=64
  -D HIST_CH_MAX=256       ; all channels together, ~50 KB
  -D HIST_DM_MAX=128       ; all DMs together, ~27 KB
  -D NEARBY_MAX=64
  -D HIST_ARCHIVE          ; message history also on the SD card (ui-lvgl/HistoryStore.h)
  -D GPS_SKYVIEW           ; satellites / signal / DOPs for the GPS screen (helpers/sensors/GpsSky.h)
  -D ESP32_LITTLEFS        ; internal flash as LittleFS, not SPIFFS (helpers/esp32/InternalFS.h)
build_src_filter = ${Wio_Tracker_L2.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<helpers/ui/LGFXDisplay.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/ui/buzzer.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-lvgl/*.cpp>
  +<../examples/companion_radio/ui-lvgl/fonts/*.c>
lib_deps =
  ${Wio_Tracker_L2.lib_deps}
  densaugeo/base64 @ ~1.4.0
  lvgl/lvgl @ 9.6.0   ; pinned: bump deliberately, re-test on hardware
  SD_MMC              ; map tiles on the microSD (framework libraries from here on)
  FS
  WiFi                ; on-device map download, live tiles, OTA
  HTTPClient
  NetworkClientSecure ; 3.x name of WiFiClientSecure (the header is still there)
  Preferences
  Update              ; Settings > Firmware update
  LittleFS

; The same firmware on the old Arduino-ESP32 2.0.17 (ESP-IDF 4.4), kept for
; comparison while the 3.x one settles. Not published (the name doesn't end in
; _solo_lvgl) and can't update itself (no CA bundle for the TLS check).
[env:Wio_Tracker_L2_companion_solo_lvgl_arduino2]
extends = env:Wio_Tracker_L2_companion_solo_lvgl
platform = ${esp32_base.platform}
lib_deps =
  ${Wio_Tracker_L2.lib_deps}
  densaugeo/base64 @ ~1.4.0
  lvgl/lvgl @ 9.6.0
  SD_MMC
  FS
  WiFi
  HTTPClient
  WiFiClientSecure
  Preferences
  LittleFS