mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-07-26 14:58:12 +00:00
64a48f2aea
E-ink panel refreshes block the main loop for 500ms-3.6s (GxEPD2's display.display() waits on the BUSY pin), and MomentaryButton::check() only ever samples the live pin level once per loop iteration. A full press+release that lands entirely inside a refresh is never sampled, not just delayed - users on WioTracker L1 Eink were losing taps. Add an opt-in ISR path (BUTTON_USE_INTERRUPTS) that latches each edge with its own timestamp into a small ring buffer from attachInterrupt(), independent of what the main loop is doing. check() replays buffered edges through the existing transition/multi-click logic afterwards, so click-duration and multi-click-window math still uses the edge's actual capture time rather than "now". Scoped to wio-tracker-l1-eink only for now: it's the one board this was reported against and the only GxEPDDisplay-class variant that currently builds clean on main. OLED boards refresh in ~20-30ms so polling already catches every press; analog-button boards (rak4631/rak3401) can't use attachInterrupt(CHANGE) at all. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
98 lines
2.9 KiB
INI
98 lines
2.9 KiB
INI
[WioTrackerL1Eink]
|
|
extends = nrf52_base
|
|
board = seeed-wio-tracker-l1
|
|
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
|
|
board_upload.maximum_size = 708608
|
|
build_flags = ${nrf52_base.build_flags}
|
|
${sensor_base.build_flags}
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
|
|
-I variants/wio-tracker-l1
|
|
-I examples/companion_radio/ui-new
|
|
-I lib/GxEPD2-patch/src
|
|
-D WIO_TRACKER_L1
|
|
-D WIO_TRACKER_L1_EINK
|
|
-D USE_SX1262
|
|
-D RADIO_CLASS=CustomSX1262
|
|
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
|
-D LORA_TX_POWER=22
|
|
-D SX126X_CURRENT_LIMIT=140
|
|
-D SX126X_RX_BOOSTED_GAIN=1
|
|
-D EINK_DISPLAY_MODEL=GxEPD2_213_B74
|
|
-D DISPLAY_ROTATION=1
|
|
-D GPS_BAUD_RATE=9600
|
|
-D ENV_PIN_SDA=PIN_WIRE1_SDA
|
|
-D ENV_PIN_SCL=PIN_WIRE1_SCL
|
|
-D DISABLE_DIAGNOSTIC_OUTPUT
|
|
-D AUTO_OFF_MILLIS=0
|
|
-D MAX_CONTACTS=350
|
|
-D MAX_GROUP_CHANNELS=40
|
|
-D OFFLINE_QUEUE_SIZE=256
|
|
-D DISPLAY_CLASS=GxEPDDisplay
|
|
-D BUTTON_USE_INTERRUPTS=1
|
|
-D UI_HAS_JOYSTICK=1
|
|
-D UI_HAS_JOYSTICK_UPDOWN=1
|
|
-D PIN_BUZZER=12
|
|
-D QSPIFLASH=1
|
|
-D FIRMWARE_SOLO_BUILD=1
|
|
-D MESHCORE_VERSION='"1.16"'
|
|
-D UI_SENSORS_PAGE=1
|
|
-D BLE_PIN_CODE=123456
|
|
build_src_filter = ${nrf52_base.build_src_filter}
|
|
+<WioTrackerL1Board.cpp>
|
|
+<../variants/wio-tracker-l1>
|
|
+<helpers/ui/GxEPDDisplay.cpp>
|
|
+<helpers/ui/MomentaryButton.cpp>
|
|
+<helpers/ui/buzzer.cpp>
|
|
+<helpers/nrf52/SerialBLEInterface.cpp>
|
|
+<helpers/sensors>
|
|
+<../examples/companion_radio/*.cpp>
|
|
+<../examples/companion_radio/ui-new/*.cpp>
|
|
lib_deps = ${nrf52_base.lib_deps}
|
|
${sensor_base.lib_deps}
|
|
adafruit/Adafruit GFX Library @ ^1.12.1
|
|
adafruit/RTClib @ ^2.1.3
|
|
zinggjm/GxEPD2 @ 1.6.2
|
|
bakercp/CRC32 @ ^2.0.0
|
|
densaugeo/base64 @ ~1.4.0
|
|
end2endzone/NonBlockingRTTTL@^1.3.0
|
|
|
|
; BLE only
|
|
[env:WioTrackerL1Eink_companion_radio_ble]
|
|
extends = WioTrackerL1Eink
|
|
extra_scripts = post:create-uf2.py
|
|
debug_tool=stlink
|
|
|
|
; Dual BLE+USB
|
|
[env:WioTrackerL1Eink_companion_dual]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
extra_scripts = post:create-uf2.py
|
|
|
|
; Dual BLE+USB with added Solo
|
|
[env:WioTrackerL1Eink_companion_solo_dual]
|
|
extends = WioTrackerL1Eink
|
|
; Optimise for size, not speed: the nRF52 Arduino core defaults to -Ofast
|
|
; (≈ -O3 + -ffast-math), which bloats flash by ~200 KB on this feature-rich
|
|
; solo build. -Os keeps every feature, fits comfortably, and is actually safer
|
|
; for float (no fast-math reassociation). Speed is irrelevant for the UI/mesh.
|
|
build_unflags = -Ofast
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
-D ENABLE_SCREENSHOT
|
|
-Os
|
|
extra_scripts = post:create-uf2.py
|
|
|
|
; Dual BLE+USB with screenshot support (development/debug)
|
|
[env:WioTrackerL1Eink_companion_dual_dev]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
-D ENABLE_SCREENSHOT
|
|
|
|
[env:WioTrackerL1Eink_kiss_modem]
|
|
extends = WioTrackerL1Eink
|
|
build_src_filter = ${WioTrackerL1Eink.build_src_filter}
|
|
+<../examples/kiss_modem/>
|