mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-09-14 15:16:40 +00:00
JakubandClaude Opus 5
05e57357d3
New M5Stack Cardputer ADV variant (ESP32-S3, ST7789 TFT, built-in TCA8418 QWERTY keyboard, PI4IOE5V6408 LoRa-cap IO-expander autodetect), and a KeyShield accessory variant for the existing LilyGO T-Echo Lite (external TCA8418 T9 keypad + AW21009 backlight driver). Both keyboards share one ENV_USE_TCA8418 polling block in UITask.cpp::loop(), coexisting with the unrelated CardKB support (different chip/address/flag). Fixes carried in from the contributed T-Echo Lite code: swapped GPS RX/TX pins, TX-LED hooks, TCXO voltage, missing GxEPD2_122_T61 panel include. Fixed during integration: I2C bus was probed for an RTC before Wire.begin() configured its pins on Cardputer ADV (silent RTC autodetect failure). Added dedicated *_solo_dual release envs for both boards (auto-picked up by the solo-firmware release workflow). Gave the T-Echo Lite KeyShield solo build -Os/-Ofast-unflag like every other nRF52 solo build (was missing, cut flash usage from 90.7% to 61.4%). Ported the shared misc-fixed 6x9 font (full Latin/Greek/Cyrillic, opt-in via OLED_MISC_FIXED_FONT) to ST7789Display for the Cardputer's on-screen keyboard. ST7789Spi isn't Adafruit_GFX-based like the other single-font drivers, and this panel's logical->physical scale is non-integer, so glyphs are re-packed to XBM and blitted through the existing drawXbm(), which already does correct fractional-scale boundary math, rather than duplicating that logic. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
29 lines
797 B
C
29 lines
797 B
C
#pragma once
|
|
|
|
#define RADIOLIB_STATIC_ONLY 1
|
|
#include <RadioLib.h>
|
|
#include <helpers/radiolib/RadioLibWrappers.h>
|
|
#include <helpers/radiolib/CustomSX1262Wrapper.h>
|
|
#include <CardputerADVBoard.h>
|
|
#include <helpers/AutoDiscoverRTCClock.h>
|
|
#include <helpers/SensorManager.h>
|
|
#ifdef DISPLAY_CLASS
|
|
#include <helpers/ui/ST7789Display.h>
|
|
#include <helpers/ui/MomentaryButton.h>
|
|
#endif
|
|
#include "helpers/sensors/EnvironmentSensorManager.h"
|
|
#include "helpers/sensors/MicroNMEALocationProvider.h"
|
|
|
|
extern CardputerADVBoard board;
|
|
extern WRAPPER_CLASS radio_driver;
|
|
extern AutoDiscoverRTCClock rtc_clock;
|
|
extern EnvironmentSensorManager sensors;
|
|
|
|
#ifdef DISPLAY_CLASS
|
|
extern DISPLAY_CLASS display;
|
|
extern MomentaryButton user_btn;
|
|
#endif
|
|
|
|
bool radio_init();
|
|
mesh::LocalIdentity radio_new_identity();
|