mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-09-24 03:46:45 +00:00
JakubandClaude Sonnet 5
26e6bc877a
Field report: a user on the stock SF8 "EU/UK (Narrow)" preset saw reception drop from ~1-5 msg/min to ~1/3h with Pwr save on, unaffected by a better antenna. Root cause, confirmed against the SX1262 datasheet and RadioLib's own maintainers (jgromes/RadioLib#1597, closed as inherent chip behaviour): the SX126x's duty-cycle preamble detection needs the sender's actual preamble to closely match what we've configured our receiver to expect. A mismatch — e.g. a repeater still on pre-v1.16 firmware sending 16 symbols against our 32 — doesn't cost a little sensitivity, it silently drops every packet from that sender regardless of signal strength. There's no local parameter fix: shortening minSymbols to tolerate shorter preambles directly shortens the wake-window's correlator dwell time, trading the preamble mismatch failure mode for a marginal-signal one instead. Checked whether IoTThinks' MeshCore fork solved this differently — it doesn't hit the problem at all, because its "power saving" only light-sleeps the MCU on the radio's own GPIO interrupt and never touches RX duty-cycle. examples/companion_radio/MyMesh.h now defines FEAT_RX_POWERSAVE 0, gating out the Settings row, the Diagnostics RXPS watchdog row, and every call site that would apply rx_powersave to the radio or CAD auto-enable — including forcing setPowerSaving(false) unconditionally so a stale rx_powersave=1 byte from before this change can't do anything either. The real duty-cycle implementation in RadioLibWrapper/CustomSX1262Wrapper is left in place, unneutered, for if a network-wide compatibility mechanism (e.g. the still-unused ADV_FEAT1/FEAT2 advert bits) is ever built to make it safe. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>