mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-09-14 15:16:40 +00:00
JakubandClaude Sonnet 5
a389a733d7
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed in with the shared upstream board configs (repeater, room server, plain companion) that every MeshCore fork carries. Split them out into their own top-level solo/<board>/ folder -- each still `extends` the board base defined in its original variants/<board>/platformio.ini, just no longer interleaved with it file-wise. - platformio.ini: extra_configs picks up solo/*/platformio.ini alongside variants/*/platformio.ini. - build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of variants/ (the release matrix is unchanged -- same 8 envs, same names). - pr-build-check.yml: solo/** added to the trigger paths. - GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a strict superset (BLE still works, plus USB), and every other board only ever had one solo build to begin with. - GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to match. No comment anywhere recorded whether this board's USB data lines are actually broken out to a connector -- DUAL_SERIAL compiles and works over BLE regardless, so worst case the USB half goes unused. - Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in the old ui-tiny UITask, never ui-new, which every solo build (these included) uses -- it did nothing on any of them. Left alone everywhere else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or the flag is legitimately read); out of scope here. - Added docs/solo_features/build_flags.md: every optional -D flag a solo build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/ vibration, GPS switch, display/battery tuning), verified against the code rather than the existing per-board comments, with what's already baked into every solo build kept separate from what's opt-in. - README: doc index + Building from source section link to the new page; path references to the moved solo files updated to solo/<board>/. All 8 solo_dual envs rebuilt clean after the move; native test suite (40 cases) unaffected. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
84 lines
2.4 KiB
INI
84 lines
2.4 KiB
INI
[WioTrackerL1Eink]
|
|
extends = nrf52_base
|
|
board = seeed-wio-tracker-l1
|
|
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
|
|
board_upload.maximum_size = 708608
|
|
build_flags = ${nrf52_base.build_flags}
|
|
${sensor_base.build_flags}
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
|
|
-I variants/wio-tracker-l1
|
|
-I examples/companion_radio/ui-new
|
|
-I lib/GxEPD2-patch/src
|
|
-D WIO_TRACKER_L1
|
|
-D WIO_TRACKER_L1_EINK
|
|
-D USE_SX1262
|
|
-D RADIO_CLASS=CustomSX1262
|
|
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
|
-D LORA_TX_POWER=22
|
|
-D SX126X_CURRENT_LIMIT=140
|
|
-D SX126X_RX_BOOSTED_GAIN=1
|
|
-D EINK_DISPLAY_MODEL=GxEPD2_213_B74
|
|
-D DISPLAY_ROTATION=1
|
|
-D GPS_BAUD_RATE=9600
|
|
-D ENV_PIN_SDA=PIN_WIRE1_SDA
|
|
-D ENV_PIN_SCL=PIN_WIRE1_SCL
|
|
-D DISABLE_DIAGNOSTIC_OUTPUT
|
|
-D AUTO_OFF_MILLIS=0
|
|
-D MAX_CONTACTS=350
|
|
-D MAX_GROUP_CHANNELS=40
|
|
-D OFFLINE_QUEUE_SIZE=256
|
|
-D DISPLAY_CLASS=GxEPDDisplay
|
|
-D BUTTON_USE_INTERRUPTS=1
|
|
-D UI_HAS_JOYSTICK=1
|
|
-D UI_HAS_JOYSTICK_UPDOWN=1
|
|
-D PIN_BUZZER=12
|
|
-D QSPIFLASH=1
|
|
-D FIRMWARE_SOLO_BUILD=1
|
|
-D MESHCORE_VERSION='"1.17"'
|
|
-D UI_SENSORS_PAGE=1
|
|
-D BLE_PIN_CODE=123456
|
|
build_src_filter = ${nrf52_base.build_src_filter}
|
|
+<WioTrackerL1Board.cpp>
|
|
+<../variants/wio-tracker-l1>
|
|
+<helpers/ui/GxEPDDisplay.cpp>
|
|
+<helpers/ui/MomentaryButton.cpp>
|
|
+<helpers/ui/buzzer.cpp>
|
|
+<helpers/nrf52/SerialBLEInterface.cpp>
|
|
+<helpers/sensors>
|
|
+<../examples/companion_radio/*.cpp>
|
|
+<../examples/companion_radio/ui-new/*.cpp>
|
|
lib_deps = ${nrf52_base.lib_deps}
|
|
${sensor_base.lib_deps}
|
|
adafruit/Adafruit GFX Library @ ^1.12.1
|
|
adafruit/RTClib @ ^2.1.3
|
|
zinggjm/GxEPD2 @ 1.6.2
|
|
bakercp/CRC32 @ ^2.0.0
|
|
densaugeo/base64 @ ~1.4.0
|
|
end2endzone/NonBlockingRTTTL@^1.3.0
|
|
|
|
; BLE only
|
|
[env:WioTrackerL1Eink_companion_radio_ble]
|
|
extends = WioTrackerL1Eink
|
|
extra_scripts = post:create-uf2.py
|
|
debug_tool=stlink
|
|
|
|
; Dual BLE+USB
|
|
[env:WioTrackerL1Eink_companion_dual]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
extra_scripts = post:create-uf2.py
|
|
|
|
; Dual BLE+USB with screenshot support (development/debug)
|
|
[env:WioTrackerL1Eink_companion_dual_dev]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
-D ENABLE_SCREENSHOT
|
|
|
|
[env:WioTrackerL1Eink_kiss_modem]
|
|
extends = WioTrackerL1Eink
|
|
build_src_filter = ${WioTrackerL1Eink.build_src_filter}
|
|
+<../examples/kiss_modem/>
|