mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-07-26 14:58:12 +00:00
5bfebc6559
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
131 lines
4.3 KiB
C
131 lines
4.3 KiB
C
#ifndef _SEEED_WIO_TRACKER_L1_H_
|
|
#define _SEEED_WIO_TRACKER_L1_H_
|
|
|
|
/** Master clock frequency */
|
|
#define VARIANT_MCK (64000000ul)
|
|
|
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "WVariant.h"
|
|
|
|
#define PINS_COUNT (38)
|
|
#define NUM_DIGITAL_PINS (38)
|
|
#define NUM_ANALOG_INPUTS (8)
|
|
#define NUM_ANALOG_OUTPUTS (0)
|
|
|
|
// LEDs
|
|
#define PIN_LED (11)
|
|
#define LED_BLUE (-1) // Disable annoying flashing caused by Bluefruit
|
|
#define LED_BUILTIN PIN_LED
|
|
#define P_LORA_TX_LED PIN_LED
|
|
#define LED_STATE_ON 1
|
|
|
|
// Buttons
|
|
#define PIN_BUTTON1 (13) // Menu / User Button
|
|
#define PIN_BUTTON2 (25) // Joystick Up
|
|
#define PIN_BUTTON3 (26) // Joystick Down
|
|
#define PIN_BUTTON4 (27) // Joystick Left
|
|
#define PIN_BUTTON5 (28) // Joystick Right
|
|
#define PIN_BUTTON6 (29) // Joystick Press
|
|
#define PIN_BACK_BTN PIN_BUTTON1
|
|
#define JOYSTICK_UP PIN_BUTTON2
|
|
#define JOYSTICK_DOWN PIN_BUTTON3
|
|
#define JOYSTICK_LEFT PIN_BUTTON4
|
|
#define JOYSTICK_RIGHT PIN_BUTTON5
|
|
#define JOYSTICK_PRESS PIN_BUTTON6
|
|
#define PIN_USER_BTN PIN_BUTTON6
|
|
|
|
// Buzzer
|
|
// #define PIN_BUZZER (12) // Buzzer pin (defined per firmware type)
|
|
|
|
#define VBAT_ENABLE (30)
|
|
|
|
// Analog pins
|
|
#define PIN_VBAT_READ (16)
|
|
#define AREF_VOLTAGE (3.6F)
|
|
#define ADC_MULTIPLIER (2.0F)
|
|
#define ADC_RESOLUTION (12)
|
|
|
|
// Serial interfaces
|
|
#define PIN_SERIAL1_RX (7)
|
|
#define PIN_SERIAL1_TX (6)
|
|
|
|
// SPI Interfaces
|
|
#define SPI_INTERFACES_COUNT (2)
|
|
|
|
#define PIN_SPI_MISO (9)
|
|
#define PIN_SPI_MOSI (10)
|
|
#define PIN_SPI_SCK (8)
|
|
|
|
// Lora Pins
|
|
#define P_LORA_SCLK PIN_SPI_SCK
|
|
#define P_LORA_MISO PIN_SPI_MISO
|
|
#define P_LORA_MOSI PIN_SPI_MOSI
|
|
#define P_LORA_DIO_1 (1)
|
|
#define P_LORA_RESET (2)
|
|
#define P_LORA_BUSY (3)
|
|
#define P_LORA_NSS (4)
|
|
#define SX126X_RXEN (5)
|
|
#define SX126X_TXEN RADIOLIB_NC
|
|
#define SX126X_DIO2_AS_RF_SWITCH true
|
|
#define SX126X_DIO3_TCXO_VOLTAGE (1.8f)
|
|
|
|
// Wire Interfaces
|
|
#define WIRE_INTERFACES_COUNT (2)
|
|
|
|
#define PIN_WIRE_SDA (14)
|
|
#define PIN_WIRE_SCL (15)
|
|
#define PIN_WIRE1_SDA (18)
|
|
#define PIN_WIRE1_SCL (17)
|
|
#define I2C_NO_RESCAN
|
|
#define DISPLAY_ADDRESS 0x3D // SH1106 OLED I2C address
|
|
|
|
// GPS L76KB
|
|
#define GPS_BAUDRATE 9600
|
|
#define PIN_GPS_TX PIN_SERIAL1_RX
|
|
#define PIN_GPS_RX PIN_SERIAL1_TX
|
|
#define PIN_GPS_STANDBY (0)
|
|
#define PIN_GPS_EN (PIN_GPS_STANDBY)
|
|
|
|
// User-assignable GPIO: 4 pins with no board function, exposed for bot
|
|
// commands (!gpio1..!gpio4) and the Tools > GPIO screen. Raw nRF52 pin
|
|
// addressing via NRF_GPIO_PIN_MAP (NOT Arduino pin numbers -- these aren't in
|
|
// g_ADigitalPinMap[], so pinMode()/digitalWrite() would silently hit whatever
|
|
// Arduino pin index happens to equal the raw value instead). See
|
|
// initVariant()'s ensureNfcPinsAsGpio() for the GPIO3/GPIO4 NFC-pin caveat.
|
|
#define PIN_GPIO1 NRF_GPIO_PIN_MAP(0, 2)
|
|
#define PIN_GPIO2 NRF_GPIO_PIN_MAP(0, 29)
|
|
#define PIN_GPIO3 NRF_GPIO_PIN_MAP(0, 9) // NFC1
|
|
#define PIN_GPIO4 NRF_GPIO_PIN_MAP(0, 10) // NFC2
|
|
|
|
// QSPI Pins
|
|
#define PIN_QSPI_SCK (19)
|
|
#define PIN_QSPI_CS (20)
|
|
#define PIN_QSPI_IO0 (21)
|
|
#define PIN_QSPI_IO1 (22)
|
|
#define PIN_QSPI_IO2 (23)
|
|
#define PIN_QSPI_IO3 (24)
|
|
|
|
#define EXTERNAL_FLASH_DEVICES P25Q16H
|
|
#define EXTERNAL_FLASH_USE_QSPI
|
|
|
|
// EInk on SPI1
|
|
#define PIN_DISPLAY_CS (36)
|
|
#define PIN_DISPLAY_BUSY (35)
|
|
#define PIN_DISPLAY_DC (34)
|
|
#define PIN_DISPLAY_RST (32)
|
|
|
|
#define PIN_SPI1_MISO (37)
|
|
#define PIN_SPI1_MOSI (33)
|
|
#define PIN_SPI1_SCK (31)
|
|
|
|
// GxEPD2 needs that for a panel that is not even used !
|
|
extern const int MISO;
|
|
extern const int MOSI;
|
|
extern const int SCK;
|
|
|
|
#endif |