Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-09-14 23:26:38 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
5fbfd7c5f90fec2f43994d09c76524976c34a7cc
MeshCore-Solo/platformio.ini
T
JakubandClaude Sonnet 5 a389a733d7 refactor(solo): move solo build configs into their own solo/ folder; one build per board; document all build flags 
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed
in with the shared upstream board configs (repeater, room server, plain
companion) that every MeshCore fork carries. Split them out into their own
top-level solo/<board>/ folder -- each still `extends` the board base defined
in its original variants/<board>/platformio.ini, just no longer interleaved
with it file-wise.

- platformio.ini: extra_configs picks up solo/*/platformio.ini alongside
  variants/*/platformio.ini.
- build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of
  variants/ (the release matrix is unchanged -- same 8 envs, same names).
- pr-build-check.yml: solo/** added to the trigger paths.
- GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a
  strict superset (BLE still works, plus USB), and every other board only
  ever had one solo build to begin with.
- GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to
  match. No comment anywhere recorded whether this board's USB data lines
  are actually broken out to a connector -- DUAL_SERIAL compiles and works
  over BLE regardless, so worst case the USB half goes unused.
- Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set
  it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in
  the old ui-tiny UITask, never ui-new, which every solo build (these
  included) uses -- it did nothing on any of them. Left alone everywhere
  else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or
  the flag is legitimately read); out of scope here.
- Added docs/solo_features/build_flags.md: every optional -D flag a solo
  build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/
  vibration, GPS switch, display/battery tuning), verified against the code
  rather than the existing per-board comments, with what's already baked
  into every solo build kept separate from what's opt-in.
- README: doc index + Building from source section link to the new page;
  path references to the moved solo files updated to solo/<board>/.

All 8 solo_dual envs rebuilt clean after the move; native test suite (40
cases) unaffected.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-08-27 00:49:37 +02:00

191 lines
5.4 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
extra_configs =
variants/*/platformio.ini
solo/*/platformio.ini
platformio.local.ini
[arduino_base]
framework = arduino
monitor_speed = 115200
lib_deps =
SPI
Wire
;jgromes/RadioLib @ ^7.7.1
https://github.com/jgromes/RadioLib.git#6d8934836678d8894e3d556550475b37dce3e2b6
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
build_flags = -w -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_ADVERT_ON_BOOT=1
-D ENABLE_PRIVATE_KEY_IMPORT=1 ; NOTE: comment these out for more secure firmware
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
build_src_filter =
+<*.cpp>
+<helpers/*.cpp>
+<helpers/radiolib/*.cpp>
+<helpers/bridges/BridgeBase.cpp>
+<helpers/ui/MomentaryButton.cpp>
; ----------------- ESP32 ---------------------
[esp32_base]
extends = arduino_base
platform = platformio/espressif32@6.11.0
monitor_filters = esp32_exception_decoder
extra_scripts = merge-bin.py
build_flags = ${arduino_base.build_flags}
-D ESP32_PLATFORM
; -D ESP32_CPU_FREQ=80 ; change it to your need
build_src_filter = ${arduino_base.build_src_filter}
[esp32_ota]
lib_deps =
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
; esp32c6 uses arduino framework 3.x
; WARNING: experimental. May not work as stable as other platforms.
[esp32c6_base]
extends = esp32_base
platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.13-1/platform-espressif32.zip
; ----------------- NRF52 ---------------------
[nrf52_base]
extends = arduino_base
platform = nordicnrf52
platform_packages =
; use internal fork that includes patch to ble stack to prevent firmware lockup during rapid connect/disconnect
; https://github.com/meshcore-dev/MeshCore/pull/1177
; https://github.com/meshcore-dev/MeshCore/pull/1295
framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301
extra_scripts = create-uf2.py
build_flags = ${arduino_base.build_flags}
-D NRF52_PLATFORM
-D LFS_NO_ASSERT=1
-D EXTRAFS=1
-D USE_CC310_HW_CRYPTO=1
lib_deps =
${arduino_base.lib_deps}
https://github.com/oltaco/CustomLFS#0.2.3
; ----------------- RP2040 ---------------------
[rp2040_base]
extends = arduino_base
upload_protocol = picotool
board_build.core = earlephilhower
platform = https://github.com/maxgerhardt/platform-raspberrypi.git ; framework-arduinopico @ 1.50600.0+sha.6a1d13e9
build_flags = ${arduino_base.build_flags}
-D RP2040_PLATFORM
; ----------------- STM32 ----------------------
[stm32_base]
extends = arduino_base
platform = ststm32
extra_scripts = post:arch/stm32/build_hex.py
build_flags = ${arduino_base.build_flags}
-D STM32_PLATFORM
-I src/helpers/stm32
-I $PROJECT_PACKAGES_DIR/framework-arduinoststm32/libraries/SubGhz/src
build_src_filter = ${arduino_base.build_src_filter}
+<helpers/stm32>
lib_deps = ${arduino_base.lib_deps}
file://arch/stm32/Adafruit_LittleFS_stm32
SubGhz
[sensor_base]
build_flags =
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
lib_deps =
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
; ----------------- TESTING ---------------------
[env:native]
platform = native
test_framework = googletest
build_flags = -std=c++17
-I src
-I test/mocks
test_build_src = yes
test_ignore = test_kiss_modem
build_src_filter =
-<*>
+<../src/Utils.cpp>
+<../src/Packet.cpp>
+<../src/helpers/ConfigSerializer.cpp>
lib_deps =
google/googletest @ 1.17.0
[env:native_kiss_modem]
platform = native
test_framework = googletest
build_flags = -std=c++17
-I test/mocks
-I src
-I examples/kiss_modem
test_build_src = yes
test_filter = test_kiss_modem
build_src_filter =
-<*>
+<../examples/kiss_modem/KissModem.cpp>
lib_deps =
google/googletest @ 1.17.0
Reference in New Issue View Git Blame Copy Permalink