mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-11-01 10:21:59 +00:00
JakubandClaude Opus 5.5
6fba3dfca7
- Settings schema gains Privacy (position in adverts, who can ask for status / location / sensors), Adding contacts (all or by type, max hops, replace oldest) and Advanced radio (path hash size, double ACK, listen before talk, interference threshold, RX boost, RX delay, airtime factor); both UIs build their rows from it - Auto-advert carries position only when Position in adverts is on - ui-new accordion holds 16 sections and 128 rows - docs: settings, tools, feature matrix Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
4.8 KiB
4.8 KiB
Settings
Settings are saved as you change them and kept through reboots and updates. On joystick devices they're folding sections: Enter on a section opens it, Left / Right changes a value, Back leaves. Only the rows your board supports are shown.
| Section | What's there |
|---|---|
| Display | Brightness, auto-off, wake on message, the message alert (banner, corner envelope or off), lock screen, the lock clock's look and the PIN, battery as icon / % / volts, time zone, clock format and seconds; on e-ink also rotation and full refresh |
| Sound | Buzzer on / off / auto (quiet while the app is connected), volume, quiet hours, the melody for messages, channels and adverts |
| Home Pages | Order of the home pages, and which are shown |
| Radio | TX power, preset, frequency, SF / BW / CR, saved presets, Auto pwr, the scope list, then the advanced options (below) |
| System | Device name, low-battery shutdown, GPS power saving, units, the battery curve, reboot |
| Keyboard | ABC or T9 layout, the two scripts, CardKB mode |
| Contacts | Show all or favourites only (DMs, channels, rooms), favourites on top, contact expiry and prune, which heard nodes are added |
| Privacy | Whether your adverts carry your position, and who may ask for your status, location and sensor readings |
| Messages | Automatic resend of direct messages, the ten quick messages |
A few notes:
- Auto pwr lowers the TX power on strong links and raises it back on weak ones; the power set above is the ceiling.
- Scope is a list of named regions (plus
*, no region). Messages are tagged with a scope so repeaters can tell communities on the same frequency apart. The default one is used for direct messages and repeating, and a channel follows it unless it picks its own (see Messages). Anyone who types the same name gets the same scope; it isn't encryption. - Low battery shuts the device down at the voltage you choose, which is also 0 % on the battery indicator.
- Batt curve sets the cell voltage at 0, 10 … 100 % for a battery that doesn't follow the usual LiPo curve: Left / Right move a point by 10 mV, Reset goes back to LiPo. The current voltage is shown, so a point can be set against what the battery reads.
Adding contacts
A node you hear is added to your contacts according to Auto-add:
- All: every node heard.
- By type: only the types switched on below it (companions, repeaters, rooms, sensors). With none on, nodes are added only by hand (Nearby › Add contact).
Up to limits how far away an added node may be: Direct (heard with no repeater) or a number of hops. Replace old makes room when the list is full by dropping the oldest contact that isn't a favourite; without it, new nodes aren't added until you make room.
Privacy
- Advert pos (Position in adverts): your adverts carry your position,
including the automatic ones. Off, nodes see your name but not where you
are. Live sharing and
{loc}in a message still send it, because you send those on purpose. - Ask status / loc / sens: who may request your telemetry: Nobody, Allowed (the contacts you gave that permission, for now in the phone app) or Everyone. Status is the battery; a request for location or sensors is answered only where status is allowed too.
Advanced radio
At the end of Radio. The defaults suit almost everyone; change them only if your mesh agrees on it.
| Setting | Does |
|---|---|
| Hash size | Bytes per repeater in a message's path: 1 (the default) fits the most hops, 2 or 3 tell repeaters apart in a big mesh |
| Double ACK | Sends each acknowledgement twice, for a lossy link |
| LBT (CAD) | Listen before talk: waits for a quiet channel before sending |
| Interf. | Treats the channel as busy when the signal is this far above the noise floor |
| RX boost | The radio's boosted receive gain: hears weaker signals for a little more power (SX126x radios) |
| RX delay | How long a repeated packet waits, so the best path wins; off by default |
| Airtime | The pause after sending, as a multiple of the time on air |
Note
Wio Tracker L2: one list of pages:
- Device: Display (including the lock and Tap to wake), Home apps, Power (battery, GPS, and the Battery curve as a chart whose points you drag), Sound (with the melody editor), Keyboard, Messages & contacts.
- Connections: Radio (with Advanced at the bottom), Privacy, Bluetooth, WiFi, GPS. Adding contacts is in Messages & contacts.
- Map & data: Map (trail, live sharing and arrival alert options), Storage.
- System: Name, Time, Units, Firmware update, About; Reboot and Power off.