mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-07-26 14:58:12 +00:00
7d9d5f847d
- Add lib/GxEPD2-patch/src/GxEPD2_BW.h: local patched copy of GxEPD2_BW.h
that exposes getBuffer()/getBufferSize() under ENABLE_SCREENSHOT guard.
Include guard (_GxEPD2_BW_H_) prevents double-inclusion of the installed
library version.
- GxEPDDisplay.h: use patched header via relative include when
ENABLE_SCREENSHOT so the patch takes precedence over the installed lib
(PlatformIO adds library paths before -I build_flags).
- DisplayDriver.h: add virtual getBuffer()/getBufferSize()/getDisplayType()
defaults (nullptr/0/0) under ENABLE_SCREENSHOT.
- SH1106Display.h / SSD1306Display.h / GxEPDDisplay.h: add concrete overrides;
getDisplayType() returns 0 (OLED) or 1 (e-ink).
- MyMesh.cpp/h: replace fragile C-cast with virtual dispatch in
handleScreenshotRequest(); extend 5-byte header to 6 bytes by appending
display_type so the host tool can decode the correct pixel layout.
- tools/screenshot.py: parse 6-byte header; add eink_buffer_to_image()
that decodes the row-major MSB-first GxEPD2 buffer with DISPLAY_ROTATION=1
(phys_x = 127-ly, phys_y = lx); dispatch on display_type.
- variants/wio-tracker-l1-eink/platformio.ini: add
[env:WioTrackerL1Eink_companion_dual_dev] with ENABLE_SCREENSHOT.
- variants/wio-tracker-l1/platformio.ini: unchanged (OLED env already exists).
Builds verified: WioTrackerL1Eink_companion_dual_dev SUCCESS,
WioTrackerL1Eink_companion_radio_ble SUCCESS (unaffected).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
77 lines
2.2 KiB
INI
77 lines
2.2 KiB
INI
[WioTrackerL1Eink]
|
|
extends = nrf52_base
|
|
board = seeed-wio-tracker-l1
|
|
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
|
|
board_upload.maximum_size = 708608
|
|
build_flags = ${nrf52_base.build_flags}
|
|
${sensor_base.build_flags}
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include
|
|
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
|
|
-I variants/wio-tracker-l1
|
|
-I examples/companion_radio/ui-new
|
|
-I lib/GxEPD2-patch/src
|
|
-D WIO_TRACKER_L1
|
|
-D WIO_TRACKER_L1_EINK
|
|
-D USE_SX1262
|
|
-D RADIO_CLASS=CustomSX1262
|
|
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
|
-D LORA_TX_POWER=22
|
|
-D SX126X_CURRENT_LIMIT=140
|
|
-D SX126X_RX_BOOSTED_GAIN=1
|
|
-D EINK_DISPLAY_MODEL=GxEPD2_213_B74
|
|
-D DISPLAY_ROTATION=1
|
|
-D GPS_BAUD_RATE=9600
|
|
-D ENV_PIN_SDA=PIN_WIRE1_SDA
|
|
-D ENV_PIN_SCL=PIN_WIRE1_SCL
|
|
-D DISABLE_DIAGNOSTIC_OUTPUT
|
|
-D AUTO_OFF_MILLIS=0
|
|
-D MAX_CONTACTS=350
|
|
-D MAX_GROUP_CHANNELS=40
|
|
-D OFFLINE_QUEUE_SIZE=256
|
|
-D DISPLAY_CLASS=GxEPDDisplay
|
|
-D UI_HAS_JOYSTICK=1
|
|
-D UI_HAS_JOYSTICK_UPDOWN=1
|
|
-D PIN_BUZZER=12
|
|
-D QSPIFLASH=1
|
|
-D FIRMWARE_PLUS_BUILD=1
|
|
-D MESHCORE_VERSION='"1.15"'
|
|
-D UI_SENSORS_PAGE=1
|
|
-D BLE_PIN_CODE=123456
|
|
build_src_filter = ${nrf52_base.build_src_filter}
|
|
+<WioTrackerL1Board.cpp>
|
|
+<../variants/wio-tracker-l1>
|
|
+<helpers/ui/GxEPDDisplay.cpp>
|
|
+<helpers/ui/MomentaryButton.cpp>
|
|
+<helpers/ui/buzzer.cpp>
|
|
+<helpers/nrf52/SerialBLEInterface.cpp>
|
|
+<helpers/sensors>
|
|
+<../examples/companion_radio/*.cpp>
|
|
+<../examples/companion_radio/ui-new/*.cpp>
|
|
lib_deps = ${nrf52_base.lib_deps}
|
|
${sensor_base.lib_deps}
|
|
adafruit/Adafruit GFX Library @ ^1.12.1
|
|
adafruit/RTClib @ ^2.1.3
|
|
zinggjm/GxEPD2 @ 1.6.2
|
|
bakercp/CRC32 @ ^2.0.0
|
|
densaugeo/base64 @ ~1.4.0
|
|
end2endzone/NonBlockingRTTTL@^1.3.0
|
|
|
|
; BLE only
|
|
[env:WioTrackerL1Eink_companion_radio_ble]
|
|
extends = WioTrackerL1Eink
|
|
extra_scripts = post:create-uf2.py
|
|
|
|
; Dual BLE+USB
|
|
[env:WioTrackerL1Eink_companion_dual]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
extra_scripts = post:create-uf2.py
|
|
|
|
; Dual BLE+USB with screenshot support (development/debug)
|
|
[env:WioTrackerL1Eink_companion_dual_dev]
|
|
extends = WioTrackerL1Eink
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
-D ENABLE_SCREENSHOT
|