mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-10-09 11:16:39 +00:00
JakubandClaude Opus 5.5
221c33ec5f
Seeed Wio Tracker L2 (ESP32-S3R8 16MB/8MB PSRAM, SX1262, NV3031B 320x240 QSPI LCD + GT911 touch + LP5814 backlight, TCA9535 expander gating every rail, ADS1115 battery ADC, AW35615 USB-C, L76K GNSS). Board layer ported from meshcore-dev/MeshCore PR #3381 (Hacuchino-hash), kept at the same paths for an easy upstream merge. Differences: - display: dropped the UIColor theme (not adopted in this fork) - GpsTap diagnostics wrapper omitted; GNSS reads Serial1 directly - nv3031b ODR fix dropped: LovyanGFX >= 1.2.30 (now pinned) defines Panel_NV3031B::init_cmds itself -- the fix became a duplicate symbol - MESH_DEBUG_PRINTLN with a non-literal format fixed (broke MESH_DEBUG builds) - upload_speed 115200: baud is virtual on native USB; skips the switch solo/wio-tracker-l2 adds Wio_Tracker_L2_companion_solo_bringup: ui-new zoomed 2x, BOOT button only, no touch -- a hardware smoke test, not a release target (deliberately not *_solo_dual, so CI doesn't publish it). The real UI for this board will be a new LVGL frontend. Verified on hardware: boot, display, radio, GPS, battery, BLE app link. First boot takes tens of seconds while SPIFFS formats its 3.4 MB partition. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
79 lines
2.6 KiB
INI
79 lines
2.6 KiB
INI
; Seeed Wio Tracker L2 - Wio-S3 module: ESP32-S3R8 + SX1262
|
|
; Board layer ported from meshcore-dev/MeshCore PR #3381 (Hacuchino-hash), whose
|
|
; pin map was derived from Seeed's Meshtastic support branch (meshtastic/firmware
|
|
; PR #10909 + device-ui `wio-l2` branch). Pre-release hardware: verify the pin
|
|
; map against a real unit.
|
|
[Wio_Tracker_L2]
|
|
extends = esp32_base
|
|
board = seeed_wio_tracker_l2
|
|
; Native USB-Serial/JTAG: the baud rate is virtual (no effect on transfer
|
|
; speed); staying at the ROM's 115200 skips esptool's post-stub baud switch,
|
|
; one less step to fail on a marginal USB link.
|
|
upload_speed = 115200
|
|
build_flags = ${esp32_base.build_flags}
|
|
${sensor_base.build_flags}
|
|
-I variants/wio-tracker-l2
|
|
-D SEEED_WIO_TRACKER_L2
|
|
-D PIN_BOARD_SDA=47
|
|
-D PIN_BOARD_SCL=48
|
|
-D PIN_USER_BTN=0
|
|
-D USE_SX1262
|
|
-D RADIO_CLASS=CustomSX1262
|
|
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
|
-D LORA_TX_POWER=22
|
|
-D P_LORA_NSS=21
|
|
-D P_LORA_RESET=7
|
|
-D P_LORA_BUSY=8
|
|
-D P_LORA_DIO_1=9
|
|
-D P_LORA_SCLK=4
|
|
-D P_LORA_MISO=5
|
|
-D P_LORA_MOSI=6
|
|
-D SX126X_DIO2_AS_RF_SWITCH=true
|
|
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
|
|
-D SX126X_CURRENT_LIMIT=140
|
|
-D SX126X_RX_BOOSTED_GAIN=1
|
|
-D ENV_INCLUDE_GPS=1
|
|
-D PIN_GPS_TX=18 ; L76K TX -> ESP32 RX
|
|
-D PIN_GPS_RX=17 ; L76K RX <- ESP32 TX
|
|
-D GPS_BAUD_RATE=9600
|
|
-D ENV_SKIP_GPS_DETECT=1 ; GPS is always present, powered via IO expander
|
|
; disable ALL env sensor I2C probes: this bus carries six onboard chips
|
|
; (TCA9535 0x21, AW35615 0x22, LP5814 0x2C, ADS1115 0x48, GT911 0x5D,
|
|
; ES8311 0x18) and stray probe matches can hang sensors.begin()
|
|
-D ENV_INCLUDE_AHTX0=0
|
|
-D ENV_INCLUDE_BME280=0
|
|
-D ENV_INCLUDE_BMP280=0
|
|
-D ENV_INCLUDE_SHTC3=0
|
|
-D ENV_INCLUDE_SHT4X=0
|
|
-D ENV_INCLUDE_INA3221=0
|
|
-D ENV_INCLUDE_INA219=0
|
|
-D ENV_INCLUDE_INA226=0
|
|
-D ENV_INCLUDE_INA260=0
|
|
-D ENV_INCLUDE_MLX90614=0
|
|
-D ENV_INCLUDE_VL53L0X=0
|
|
-D ENV_INCLUDE_BME680=0
|
|
-D ENV_INCLUDE_BMP085=0
|
|
-D ENV_INCLUDE_LPS22HB=0
|
|
build_src_filter = ${esp32_base.build_src_filter}
|
|
+<../variants/wio-tracker-l2>
|
|
+<helpers/sensors/*.cpp>
|
|
lib_deps =
|
|
${esp32_base.lib_deps}
|
|
${sensor_base.lib_deps}
|
|
lovyan03/LovyanGFX @ ^1.2.30 ; >=1.2.30 defines Panel_NV3031B::init_cmds itself (PR #3381 needed an ODR fix for older)
|
|
|
|
[env:Wio_Tracker_L2_repeater]
|
|
extends = Wio_Tracker_L2
|
|
build_flags =
|
|
${Wio_Tracker_L2.build_flags}
|
|
-D ADVERT_NAME='"WioL2 Repeater"'
|
|
-D ADVERT_LAT=0.0
|
|
-D ADVERT_LON=0.0
|
|
-D ADMIN_PASSWORD='"password"'
|
|
-D MAX_NEIGHBOURS=50
|
|
build_src_filter = ${Wio_Tracker_L2.build_src_filter}
|
|
+<../examples/simple_repeater/*.cpp>
|
|
lib_deps =
|
|
${Wio_Tracker_L2.lib_deps}
|
|
${esp32_ota.lib_deps}
|