Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-09-14 15:16:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
a389a733d7d78113948de8456965258cece4a2bd
MeshCore-Solo/variants/wio-tracker-l1/platformio.ini
T
JakubandClaude Sonnet 5 a389a733d7 refactor(solo): move solo build configs into their own solo/ folder; one build per board; document all build flags 
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed
in with the shared upstream board configs (repeater, room server, plain
companion) that every MeshCore fork carries. Split them out into their own
top-level solo/<board>/ folder -- each still `extends` the board base defined
in its original variants/<board>/platformio.ini, just no longer interleaved
with it file-wise.

- platformio.ini: extra_configs picks up solo/*/platformio.ini alongside
  variants/*/platformio.ini.
- build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of
  variants/ (the release matrix is unchanged -- same 8 envs, same names).
- pr-build-check.yml: solo/** added to the trigger paths.
- GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a
  strict superset (BLE still works, plus USB), and every other board only
  ever had one solo build to begin with.
- GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to
  match. No comment anywhere recorded whether this board's USB data lines
  are actually broken out to a connector -- DUAL_SERIAL compiles and works
  over BLE regardless, so worst case the USB half goes unused.
- Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set
  it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in
  the old ui-tiny UITask, never ui-new, which every solo build (these
  included) uses -- it did nothing on any of them. Left alone everywhere
  else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or
  the flag is legitimately read); out of scope here.
- Added docs/solo_features/build_flags.md: every optional -D flag a solo
  build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/
  vibration, GPS switch, display/battery tuning), verified against the code
  rather than the existing per-board comments, with what's already baked
  into every solo build kept separate from what's opt-in.
- README: doc index + Building from source section link to the new page;
  path references to the moved solo files updated to solo/<board>/.

All 8 solo_dual envs rebuilt clean after the move; native test suite (40
cases) unaffected.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-08-27 00:49:37 +02:00

164 lines
4.8 KiB
INI
Raw Blame History

[WioTrackerL1]
extends = nrf52_base
board = seeed-wio-tracker-l1
board_build.ldscript = boards/nrf52840_s140_v7.ld
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I lib/nrf52/s140_nrf52_7.3.0_API/include
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
-I variants/wio-tracker-l1
-D WIO_TRACKER_L1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_OLED_RESET=-1
-D GPS_BAUD_RATE=9600
build_src_filter = ${nrf52_base.build_src_filter}
+<WioTrackerL1Board.cpp>
+<../variants/wio-tracker-l1>
+<helpers/ui/SH1106Display.cpp>
+<helpers/sensors>
lib_deps= ${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SH110X @ ^2.1.13
adafruit/Adafruit GFX Library @ ^1.12.1
[env:WioTrackerL1_repeater]
extends = WioTrackerL1
build_src_filter = ${WioTrackerL1.build_src_filter}
+<../examples/simple_repeater>
build_flags =
${WioTrackerL1.build_flags}
-D ADVERT_NAME='"WioTrackerL1 Repeater"'
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D DISPLAY_CLASS=SH1106Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
lib_deps = ${WioTrackerL1.lib_deps}
adafruit/RTClib @ ^2.1.3
[env:WioTrackerL1_room_server]
extends = WioTrackerL1
build_src_filter = ${WioTrackerL1.build_src_filter}
+<../examples/simple_room_server>
build_flags = ${WioTrackerL1.build_flags}
-D ADVERT_NAME='"WioTrackerL1 Room"'
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D DISPLAY_CLASS=SH1106Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
lib_deps = ${WioTrackerL1.lib_deps}
adafruit/RTClib @ ^2.1.3
[WioTrackerL1CompanionUSB]
extends = WioTrackerL1
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags = ${WioTrackerL1.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SH1106Display
-D UI_HAS_JOYSTICK=1
-D UI_HAS_JOYSTICK_UPDOWN=1
-D OFFLINE_QUEUE_SIZE=256
-D PIN_BUZZER=12
-D QSPIFLASH=1
-D FIRMWARE_SOLO_BUILD=1
-D MESHCORE_VERSION='"1.17"'
-D UI_SENSORS_PAGE=1
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${WioTrackerL1.build_src_filter}
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/SH1106Display.cpp>
+<helpers/ui/buzzer.cpp>
lib_deps = ${WioTrackerL1.lib_deps}
adafruit/RTClib @ ^2.1.3
densaugeo/base64 @ ~1.4.0
end2endzone/NonBlockingRTTTL@^1.3.0
[env:WioTrackerL1_companion_radio_usb]
extends = WioTrackerL1CompanionUSB
[env:WioTrackerL1_companion_radio_usb_settings]
extends = WioTrackerL1CompanionUSB
build_flags = ${WioTrackerL1CompanionUSB.build_flags}
-D UI_HAS_JOYSTICK_UPDOWN=1
extra_scripts = post:create-uf2.py
[WioTrackerL1CompanionBLE]
extends = WioTrackerL1
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags = ${WioTrackerL1.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=SH1106Display
-D UI_HAS_JOYSTICK=1
-D UI_HAS_JOYSTICK_UPDOWN=1
-D PIN_BUZZER=12
-D QSPIFLASH=1
-D ADVERT_NAME='"@@MAC"'
-D FIRMWARE_SOLO_BUILD=1
-D MESHCORE_VERSION='"1.17"'
-D UI_SENSORS_PAGE=1
-D ENV_PIN_SDA=PIN_WIRE1_SDA
-D ENV_PIN_SCL=PIN_WIRE1_SCL
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${WioTrackerL1.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/ui/buzzer.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps = ${WioTrackerL1.lib_deps}
adafruit/RTClib @ ^2.1.3
densaugeo/base64 @ ~1.4.0
end2endzone/NonBlockingRTTTL@^1.3.0
[env:WioTrackerL1_companion_radio_ble]
extends = WioTrackerL1CompanionBLE
[env:WioTrackerL1_companion_radio_ble_settings]
extends = WioTrackerL1CompanionBLE
build_flags = ${WioTrackerL1CompanionBLE.build_flags}
-D UI_HAS_JOYSTICK_UPDOWN=1
extra_scripts = post:create-uf2.py
[WioTrackerL1CompanionDual]
extends = WioTrackerL1CompanionBLE
build_flags = ${WioTrackerL1CompanionBLE.build_flags}
-D DUAL_SERIAL=1
-UBLE_DEBUG_LOGGING
[env:WioTrackerL1_companion_dual]
extends = WioTrackerL1CompanionDual
build_flags = ${WioTrackerL1CompanionDual.build_flags}
-D UI_HAS_JOYSTICK_UPDOWN=1
extra_scripts = post:create-uf2.py
[env:WioTrackerL1_companion_dual_dev]
extends = WioTrackerL1CompanionDual
build_flags = ${WioTrackerL1CompanionDual.build_flags}
-D UI_HAS_JOYSTICK_UPDOWN=1
-D DUAL_SERIAL=1
-D ENABLE_SCREENSHOT
[env:WioTrackerL1_kiss_modem]
extends = WioTrackerL1
build_src_filter = ${WioTrackerL1.build_src_filter}
+<../examples/kiss_modem/>
Reference in New Issue View Git Blame Copy Permalink