mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-09-14 15:16:40 +00:00
JakubandClaude Sonnet 5
a389a733d7
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed in with the shared upstream board configs (repeater, room server, plain companion) that every MeshCore fork carries. Split them out into their own top-level solo/<board>/ folder -- each still `extends` the board base defined in its original variants/<board>/platformio.ini, just no longer interleaved with it file-wise. - platformio.ini: extra_configs picks up solo/*/platformio.ini alongside variants/*/platformio.ini. - build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of variants/ (the release matrix is unchanged -- same 8 envs, same names). - pr-build-check.yml: solo/** added to the trigger paths. - GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a strict superset (BLE still works, plus USB), and every other board only ever had one solo build to begin with. - GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to match. No comment anywhere recorded whether this board's USB data lines are actually broken out to a connector -- DUAL_SERIAL compiles and works over BLE regardless, so worst case the USB half goes unused. - Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in the old ui-tiny UITask, never ui-new, which every solo build (these included) uses -- it did nothing on any of them. Left alone everywhere else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or the flag is legitimately read); out of scope here. - Added docs/solo_features/build_flags.md: every optional -D flag a solo build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/ vibration, GPS switch, display/battery tuning), verified against the code rather than the existing per-board comments, with what's already baked into every solo build kept separate from what's opt-in. - README: doc index + Building from source section link to the new page; path references to the moved solo files updated to solo/<board>/. All 8 solo_dual envs rebuilt clean after the move; native test suite (40 cases) unaffected. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
20 lines
935 B
INI
20 lines
935 B
INI
; Solo build for Seeed Wio Tracker L1 (E-ink) -- extends WioTrackerL1Eink,
|
|
; defined in variants/wio-tracker-l1-eink/platformio.ini. Solo configs live in
|
|
; their own top-level solo/ folder, separate from the shared upstream board
|
|
; variants in variants/, so this repo's Solo-specific additions don't get
|
|
; mixed in with configs other MeshCore forks/upstream also carry.
|
|
;
|
|
; Dual BLE+USB with added Solo
|
|
[env:WioTrackerL1Eink_companion_solo_dual]
|
|
extends = WioTrackerL1Eink
|
|
; Optimise for size, not speed: the nRF52 Arduino core defaults to -Ofast
|
|
; (≈ -O3 + -ffast-math), which bloats flash by ~200 KB on this feature-rich
|
|
; solo build. -Os keeps every feature, fits comfortably, and is actually safer
|
|
; for float (no fast-math reassociation). Speed is irrelevant for the UI/mesh.
|
|
build_unflags = -Ofast
|
|
build_flags = ${WioTrackerL1Eink.build_flags}
|
|
-D DUAL_SERIAL=1
|
|
-D ENABLE_SCREENSHOT
|
|
-Os
|
|
extra_scripts = post:create-uf2.py
|