mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-07-31 01:08:14 +00:00
e1022791e8
- Add custom partition table for fitting larger firmware - Create LilyGoT3S3Board.h for board-specific functionality - Update all example files to support the T3 board with SX1276 - Configure build environment for optimizing firmware size - Set up the right pin configuration for SX1276 on LilyGo T3
88 lines
2.6 KiB
C++
88 lines
2.6 KiB
C++
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
#include "ESP32Board.h"
|
|
#include <driver/rtc_io.h>
|
|
|
|
// LoRa radio module pins for LilyGo T3S3
|
|
// These need to be defined here for the SX1276 version
|
|
#if defined(RADIO_CLASS) && defined(CustomSX1276)
|
|
// SX1276 pin definitions specific to LilyGo T3S3
|
|
#define P_LORA_DIO_0 34 // DIO0 interrupt pin (SX1276 uses DIO0)
|
|
#define P_LORA_DIO_1 33 // DIO1 interrupt pin
|
|
#define P_LORA_NSS 7 // Chip select
|
|
#define P_LORA_RESET 8 // Reset pin
|
|
#define P_LORA_SCLK 5 // SPI clock
|
|
#define P_LORA_MISO 3 // SPI MISO
|
|
#define P_LORA_MOSI 6 // SPI MOSI
|
|
#endif
|
|
|
|
// Base class for LilyGo T-series boards
|
|
class LilyGoTBoard : public ESP32Board {
|
|
public:
|
|
void begin() {
|
|
ESP32Board::begin();
|
|
|
|
esp_reset_reason_t reason = esp_reset_reason();
|
|
if (reason == ESP_RST_DEEPSLEEP) {
|
|
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
|
|
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
|
|
startup_reason = BD_STARTUP_RX_PACKET;
|
|
}
|
|
|
|
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
|
|
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
|
|
}
|
|
}
|
|
|
|
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
|
|
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
|
|
|
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
|
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
|
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
|
|
|
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
|
|
|
if (pin_wake_btn < 0) {
|
|
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
|
} else {
|
|
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
|
}
|
|
|
|
if (secs > 0) {
|
|
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
|
}
|
|
|
|
// Finally set ESP32 into sleep
|
|
esp_deep_sleep_start(); // CPU halts here and never returns!
|
|
}
|
|
|
|
uint16_t getBattMilliVolts() override {
|
|
analogReadResolution(12);
|
|
|
|
uint32_t raw = 0;
|
|
for (int i = 0; i < 8; i++) {
|
|
raw += analogReadMilliVolts(PIN_VBAT_READ);
|
|
}
|
|
raw = raw / 8;
|
|
|
|
return (2 * raw);
|
|
}
|
|
};
|
|
|
|
// Standard ESP32 version (for T3 board)
|
|
class LilyGoT3Board : public LilyGoTBoard {
|
|
public:
|
|
const char* getManufacturerName() const override {
|
|
return "LilyGo T3";
|
|
}
|
|
};
|
|
|
|
// For S3 variant
|
|
class LilyGoT3S3Board : public LilyGoTBoard {
|
|
public:
|
|
const char* getManufacturerName() const override {
|
|
return "LilyGo T3S3";
|
|
}
|
|
}; |