mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-10-09 11:16:39 +00:00
JakubandClaude Opus 5.5
23caa11f51
Power: the UI loop sleeps until something is due (never with packets queued); screen off puts the CPU at 80 MHz, the GT911 to sleep (unless a tap wakes the screen) and the LP5814 in standby. GPS off now cuts the L76K's rail and UART on the L2 (L2GpsProvider). The battery divider is powered only for a reading (measured: settles at once); readings within 2 s are reused. The SD mount is retried at most every 5 s. Fixes: WiFi left on after leaving a scan, live tiles' WiFi kept with the screen off on the map, an ADC read every second for the status bar, touch polled on every pass while dark, a scan cutting an update's WiFi, relay count not refreshing in a channel thread, raw @[nick] in room previews. Labels skip unchanged text (no redraw). Helpers: scrollList, dimOverlay, settingRow, flexBox, nvs::get/put, trailFilePath (a second save in the same minute no longer overwrites), unreadTotal. Dead code removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
61 lines
1.8 KiB
C++
61 lines
1.8 KiB
C++
#include <Arduino.h>
|
|
#include "target.h"
|
|
|
|
WioTrackerL2Board board;
|
|
|
|
static SPIClass spi;
|
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
|
|
|
|
WRAPPER_CLASS radio_driver(radio, board);
|
|
|
|
ESP32RTCClock fallback_clock;
|
|
AutoDiscoverRTCClock rtc_clock(fallback_clock);
|
|
L2GpsProvider gps(Serial1, &rtc_clock);
|
|
EnvironmentSensorManager sensors(gps);
|
|
|
|
#ifdef DISPLAY_CLASS
|
|
DISPLAY_CLASS display;
|
|
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true, false); // no multi-click: back answers at once
|
|
#endif
|
|
|
|
#ifdef BUZZER_I2S
|
|
void buzzerAmpPower(bool on) { board.setSpeakerAmp(on); }
|
|
#endif
|
|
|
|
void L2GpsProvider::begin() {
|
|
board.setGnssPower(true); // with the power-up reset
|
|
if (_uart_off) { // back from stop(): the UART again
|
|
Serial1.setRxBufferSize(1024);
|
|
Serial1.begin(GPS_BAUD_RATE, SERIAL_8N1, PIN_GPS_TX, PIN_GPS_RX);
|
|
_uart_off = false;
|
|
}
|
|
MicroNMEALocationProvider::begin();
|
|
}
|
|
|
|
void L2GpsProvider::stop() {
|
|
MicroNMEALocationProvider::stop();
|
|
// The UART's TX idling high would feed the unpowered module through its pin.
|
|
Serial1.end();
|
|
pinMode(PIN_GPS_RX, INPUT); // PIN_GPS_RX: the module's RX, our TX
|
|
_uart_off = true;
|
|
board.setGnssPower(false);
|
|
}
|
|
|
|
void L2GpsProvider::reset() { board.gnssReset(); }
|
|
bool L2GpsProvider::isEnabled() { return board.gnssPowered(); }
|
|
|
|
bool radio_init() {
|
|
MESH_DEBUG_PRINTLN("radio_init: rtc + sx1262 init");
|
|
fallback_clock.begin();
|
|
rtc_clock.begin(Wire); // Wire already running on 47/48 from board.begin()
|
|
|
|
bool ok = radio.std_init(&spi);
|
|
MESH_DEBUG_PRINTLN("radio_init: SX1262 %s", ok ? "OK" : "FAILED");
|
|
return ok;
|
|
}
|
|
|
|
mesh::LocalIdentity radio_new_identity() {
|
|
RadioNoiseListener rng(radio);
|
|
return mesh::LocalIdentity(&rng); // create new random identity
|
|
}
|