diff --git a/lang/de.json b/lang/de.json index 28308bc2..7e532494 100644 --- a/lang/de.json +++ b/lang/de.json @@ -246,6 +246,7 @@ "Aborted": "Abgebrochen", "About to restore": "Wird gerade wiederhergestellt", "Absolute directory path to use as backup target:": "Absoluter Verzeichnispfad zur Verwendung als Sicherungsziel:", + "Absolute path of the client SSH private key:": "Absoluter Pfad des privaten SSH-Schlüssels des Clients:", "Absolute path to a file or directory you want backed up:": "Absoluter Pfad zu einer Datei oder einem Verzeichnis, die/das Sie sichern möchten:", "Acceleration": "Beschleunigung", "Acceleration configuration cancelled": "Beschleunigungskonfiguration abgesagt", @@ -619,6 +620,8 @@ "Authentication:": "Authentifizierung:", "Authorization failed": "Die Autorisierung ist fehlgeschlagen", "Authorization successful": "Autorisierung erfolgreich", + "Authorize a client SSH public key": "Öffentlichen SSH-Schlüssel eines Clients autorisieren", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorisiere zuerst einen eigenen öffentlichen Clientschlüssel auf dem Server. Das eingeschränkte USB/IP-Konto kann keine Shell starten oder andere Sockets weiterleiten. Prüfe vor dem Verbinden den Hostschlüssel des Servers; unbekannte Schlüssel werden abgelehnt.", "Authorize this key on the server": "Autorisieren Sie diesen Schlüssel auf dem Server", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autorisieren über „pct exec“ (Borg-Server ist ein LXC auf einem PVE-Host, in den ich SSH einbinden kann)", "Authorized": "Autorisiert", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Widersprüchliche Dienstprogramme entfernt", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Verbinde Zigbee-Geräte mit MQTT über eine webbasierte Einrichtungsoberfläche.", "Connect a Coral Accelerator and try again.": "Schließen Sie einen Coral Accelerator an und versuchen Sie es erneut.", + "Connect a remote USB device": "Entferntes USB-Gerät verbinden", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Verbinden Sie es oder entfernen Sie es aus dem Container in Proxmox (Ressourcen) und führen Sie die Wiederherstellung erneut aus.", "Connect your devices and users together in your own secure virtual private network.": "Verbinden Sie Ihre Geräte und Benutzer in Ihrem eigenen sicheren virtuellen privaten Netzwerk.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Verbinden Sie Ihre Geräte mit einem sicheren WireGuard®-basierten Overlay-Netzwerk mit SSO, MFA und granularen Zugriffskontrollen.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Directus-Administrator", "Disable NIC Offloading (Intel e1000e)": "NIC-Offloading deaktivieren (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Deaktivieren Sie Secure Boot in der UEFI-Firmware und führen Sie das Installationsprogramm erneut aus. Es wurde nichts geändert.", + "Disable USB/IP server": "USB/IP-Server deaktivieren", "Disable autostart on conflicting VM": "Deaktivieren Sie den Autostart auf in Konflikt stehenden VMs", "Disable autostart on one VM to avoid startup conflicts.": "Deaktivieren Sie den Autostart auf einer VM, um Startkonflikte zu vermeiden.", "Disable job": "Job deaktivieren", "Disable kernel audit messages (optional but recommended):": "Deaktivieren Sie Kernel-Überwachungsmeldungen (optional, aber empfohlen):", "Disable onboot on affected VM(s)/CT(s)": "Onboot auf betroffenen VM(s)/CT(s) deaktivieren", "Disable portmapper/rpcbind": "Portmapper/rpcbind deaktivieren", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Den Server deaktivieren und alle von ProxMenux verwalteten USB-Geräte freigeben? Die gespeicherte Auswahl bleibt für die nächste Aktivierung erhalten.", "Disabled": "Deaktiviert", "Disabling High Availability services...": "Hochverfügbarkeitsdienste werden deaktiviert...", "Disabling ZFS autotrim applied by ProxMenux...": "Deaktivieren der von ProxMenux angewendeten ZFS-Autotrim-Funktion ...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Aktivieren Sie Remote Desktop (RDP), bevor Sie die virtuelle Anzeige deaktivieren.", "Enable SSD emulation for this disk?": "SSD-Emulation für diese Festplatte aktivieren?", "Enable TCP BBR/Fast Open control": "Aktivieren Sie die TCP-BBR/Fast-Open-Steuerung", + "Enable USB/IP server": "USB/IP-Server aktivieren", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Aktivieren von VA-API Transcoding und HDR10/Dolby Vision to SDR Tone Mapping", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Aktivieren Sie VA-API, Hardware-Codierung und OpenCL-Tone-Mapping in Jellyfin", "Enable VFIO IOMMU support": "VFIO IOMMU-Unterstützung aktivieren", @@ -3212,6 +3219,7 @@ "If pvesm path returned a DEVICE (LVM):": "Wenn pvesm path ein GERÄT (LVM) zurückgegeben hat:", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Wenn pvesm path ein VERZEICHNIS (ZFS/BTRFS) zurückgegeben hat:", "If repositories error:": "Bei Repository-Fehler:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Wenn der USB/IP-Dienst unerwartet stoppt, beenden Sie die Freigabe, solange das Gerät noch angeschlossen ist. In seltenen Fällen ist es erst nach einem Neustart des Hosts wieder verfügbar.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Wenn der Container bereits geändert wurde, wird sein vorheriges natives Backup wiederhergestellt. Freigegebene Hostverzeichnisse werden nicht zurückgesetzt. Die Festplatten des fehlgeschlagenen Versuchs werden entfernt, wenn die Bereinigung erfolgreich ist.", "If the host freezes, remove hostpci entries from": "Wenn der Host einfriert, entfernen Sie die Hostpci-Einträge aus", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Wenn der Image-Kanal eine neue Version hat, wird CT gestoppt, gesichert und überprüft und durch das neue Image ersetzt, um den Container zu aktualisieren. Wenn etwas fehlschlägt, wird das Backup wiederhergestellt.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Installieren Sie Serverpakete in CT:", "Install terminal multiplexers": "Installieren Sie Terminal-Multiplexer", "Install the Edge TPU runtime (libedgetpu1-std)": "Installieren Sie die Edge TPU-Laufzeit (libedgetpu1-std).", + "Install the USB/IP dependencies from the configured Debian repositories?": "USB/IP-Abhängigkeiten aus den konfigurierten Debian-Repositories installieren?", "Install this image?": "Installieren Sie dieses Bild?", "Install with Cloud-Init script": "Installation mit Cloud-Init-Skript", "Install with ISO from UUP Dump": "Mit ISO von UUP Dump installieren", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Einzufügende Zeile (einzelne Zeile, einschließlich „command=…“-Präfix):", "LinkStack": "LinkStack", "Linux Installation Options": "Linux-Installationsoptionen", + "Linux guest setup and migration notes": "Hinweise zur Einrichtung und Migration von Linux-Gästen", "Linux/Mac path:": "Linux/Mac-Pfad:", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin mit optionalem GPU-Passthrough", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB requires ein Benutzer, Datenbank und Passwort", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Keine doppelten IP-Adressen", "No duplicate repositories found": "Keine doppelten Repositorys gefunden", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Nach der SR-IOV-Filterung bleiben keine berechtigten Controller/NVMe-Geräte übrig. Überspringen.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Keine geeigneten USB-Geräte gefunden. Hubs, Massenspeicher und Netzwerkadapter sind ausgeschlossen.", "No eligible controllers remain after SR-IOV filtering.": "Nach der SR-IOV-Filterung bleiben keine berechtigten Controller übrig.", "No encryption key is stored on this host. Choose how to set one up:": "Auf diesem Host ist kein Verschlüsselungsschlüssel gespeichert. Wählen Sie aus, wie Sie eines einrichten möchten:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Es wurden keine exportierbaren VM-Festplatten gefunden (CD-ROM/Cloud-Init sind ausgeschlossen).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Kein Selbsttestprotokoll verfügbar für", "No server IP or hostname provided.": "Keine Server-IP oder Hostname angegeben.", "No share access test succeeded with guest authentication.": "Bei der Gastauthentifizierung war kein Freigabezugriffstest erfolgreich.", + "No shared devices are available on this server.": "Auf diesem Server sind keine freigegebenen Geräte verfügbar.", "No shared media content.": "Keine geteilten Medieninhalte.", "No shared mount detected. Applying standard local access.": "Kein gemeinsamer Mount erkannt. Anwenden des standardmäßigen lokalen Zugriffs.", "No shares configured.": "Keine Freigaben konfiguriert.", @@ -5130,6 +5142,7 @@ "Path of the Compose file": "Pfad der Compose-Datei", "Path of the oci-compose file": "Pfad der oci-compose-Datei", "Path removed:": "Pfad entfernt:", + "Path to the client SSH public key on this server:": "Pfad zum öffentlichen SSH-Schlüssel des Clients auf diesem Server:", "Path:": "Weg:", "Paths applied:": "Angewandte Pfade:", "Paths included in backup": "Im Backup enthaltene Pfade", @@ -5675,6 +5688,7 @@ "Remove Proxmox NFS storage:": "Entfernen Sie den Proxmox NFS-Speicher:", "Remove Proxmox iSCSI storage:": "Entfernen Sie den Proxmox iSCSI-Speicher:", "Remove Secure Gateway? State will be preserved.": "Secure Gateway entfernen? Der Zustand bleibt erhalten.", + "Remove a remote USB connection": "Entfernte USB-Verbindung entfernen", "Remove custom paths": "Benutzerdefinierte Pfade entfernen", "Remove disk references from affected VM(s)/CT(s) config": "Entfernen Sie Festplattenverweise aus der Konfiguration der betroffenen VM(s)/CT(s).", "Remove every registered gasket DKMS version": "Alle registrierten gasket-DKMS-Versionen entfernen", @@ -5695,6 +5709,7 @@ "Remove the lock left on a container by an interrupted task": "Die Sperre entfernen, die eine unterbrochene Aufgabe auf einem Container hinterlassen hat", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Die gespeicherten Anmeldeinformationen für {registry} entfernen?\nLaufende Apps funktionieren weiterhin.", "Remove the unprivileged flag from configuration:": "Entfernen Sie das Unprivileged-Flag aus der Konfiguration:", + "Remove this connection and detach its USB device?": "Diese Verbindung entfernen und das USB-Gerät trennen?", "Remove unused packages and their config": "Entfernen Sie nicht verwendete Pakete und deren Konfiguration", "Remove: delete the application and its containers": "Entfernen: Löschen Sie die Anwendung und ihre Container", "Removed": "ENTFERNT", @@ -5917,9 +5932,11 @@ "Run mode: Unattended": "Betriebsmodus: Unbeaufsichtigt", "Run now": "Jetzt ausführen", "Run security audit now": "Führen Sie jetzt ein Sicherheitsaudit durch", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Führen Sie den Client in der Linux-VM aus, die das USB-Gerät benötigt. Installieren Sie usbip, openssh-client und kmod und kopieren Sie usbip_manager.py an denselben Pfad wie auf dem Server. Richten Sie die Schlüsselauthentifizierung ein und prüfen Sie den Hostschlüssel des Servers, bevor Sie eine Verbindung hinzufügen. Der Client verwendet den Gastkernel und kann sich nach einer Migration erneut verbinden, während das physische USB-Gerät am Server bleibt. Unprivilegierte LXC und Home Assistant OS benötigen eine eigene Kernel-/Geräte- oder Add-on-Einrichtung. Ein physisches Gerät kann jeweils nur mit einem Client verbunden sein.", "Run the following inside the VM:": "Führen Sie Folgendes in der VM aus:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Führen Sie den Release-Channel-Schalter von einer SSH-Sitzung oder der Proxmox-Hostkonsole aus mit:", "Run the update from an SSH session or the Proxmox host console with:": "Führen Sie das Update über eine SSH-Sitzung oder die Proxmox-Hostkonsole aus mit:", + "Run this menu as root.": "Führen Sie dieses Menü als root aus.", "Run this operation as root.": "Führen Sie diesen Vorgang als root aus.", "Run upgrade checklist script:": "Führen Sie das Upgrade-Checklisten-Skript aus:", "Running": "Läuft", @@ -6144,6 +6161,7 @@ "Select a new language for the menu:": "Wählen Sie eine neue Sprache für das Menü:", "Select a post-installation script:": "Wählen Sie ein Nachinstallationsskript aus:", "Select a pre-configured Linux VM script to execute:": "Wählen Sie ein vorkonfiguriertes Linux-VM-Skript zur Ausführung aus:", + "Select a saved USB/IP device:": "Gespeichertes USB/IP-Gerät auswählen:", "Select a script or action:": "Wählen Sie ein Skript oder eine Aktion aus:", "Select a share to delete:": "Wählen Sie eine Freigabe zum Löschen aus:", "Select a specific Coral or USB node, not the whole /dev": "Wählen Sie einen bestimmten Coral- oder USB-Knoten, nicht den gesamten /dev", @@ -6221,6 +6239,7 @@ "Select the Linux distribution to install:": "Wählen Sie die zu installierende Linux-Distribution aus:", "Select the NAS system to install:": "Wählen Sie das zu installierende NAS-System aus:", "Select the NVIDIA driver version to install:": "Wählen Sie die zu installierende NVIDIA-Treiberversion aus:", + "Select the USB device to share:": "Freizugebendes USB-Gerät auswählen:", "Select the VM to add the GPU to:": "Wählen Sie die VM aus, zu der Sie die GPU hinzufügen möchten:", "Select the VM to which you want to add disks:": "Wählen Sie die VM aus, zu der Sie Festplatten hinzufügen möchten:", "Select the VM where you want to import the disk image:": "Wählen Sie die VM aus, in die Sie das Disk-Image importieren möchten:", @@ -6245,6 +6264,7 @@ "Select the parent job to attach to:": "Wählen Sie den übergeordneten Job aus, an den Sie anhängen möchten:", "Select the paths to restore (one per backup entry):": "Wählen Sie die wiederherzustellenden Pfade aus (einen pro Sicherungseintrag):", "Select the privileged LXC container to convert:": "Wählen Sie den zu konvertierenden privilegierten LXC-Container aus:", + "Select the remote USB device:": "Entferntes USB-Gerät auswählen:", "Select the storage that will receive the backups:": "Wählen Sie den Speicher aus, der die Backups erhalten soll:", "Select the storage volume for disk import:": "Wählen Sie das Speichervolume für den Festplattenimport aus:", "Select the sync interval (in hours):": "Wählen Sie das Synchronisierungsintervall (in Stunden):", @@ -6331,6 +6351,7 @@ "Server IDs to test against, separated by commas (optional)": "Server-IDs zum Testen, durch Kommas getrennt (optional)", "Server IP/hostname is correct": "Server-IP/Hostname ist korrekt", "Server IP:": "Server-IP:", + "Server SSH port:": "SSH-Port des Servers:", "Server is accessible:": "Server ist erreichbar:", "Server is online": "Server ist online", "Server is running": "Server läuft", @@ -6392,6 +6413,7 @@ "Share Access Error": "Fehler beim Freigabezugriff", "Share Name": "Teilen Sie den Namen", "Share Options": "Freigabeoptionen", + "Share a local USB device": "Lokales USB-Gerät freigeben", "Share added successfully.": "Teilen erfolgreich hinzugefügt.", "Share deleted and Samba service restarted.": "Freigabe gelöscht und Samba-Dienst neu gestartet.", "Share exists:": "Freigabe existiert:", @@ -6399,6 +6421,7 @@ "Share name:": "Freigabename:", "Share not found on server:": "Freigabe nicht auf Server gefunden:", "Share path:": "Freigabepfad:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Geben Sie ausgewählte USB-Geräte über SSH frei oder verbinden Sie diesen Linux-Rechner mit einem USB/IP-Server.", "Share updated successfully.": "Freigabe erfolgreich aktualisiert.", "Share:": "Aktie:", "ShareCoveX panel": "ShareCoveX-Panel", @@ -6667,6 +6690,8 @@ "Still has issues": "Es gibt immer noch Probleme", "Stop - shuts the guest down during backup": "Stopp – fährt den Gast während der Sicherung herunter", "Stop it first and run this option again.": "Stoppen Sie es zuerst und führen Sie diese Option erneut aus.", + "Stop sharing a USB device": "USB-Gerätefreigabe beenden", + "Stop sharing this device? An attached remote client will disconnect.": "Freigabe dieses Geräts beenden? Ein verbundener entfernter Client wird getrennt.", "Stop that VM, then choose:": "Stoppen Sie VM und wählen Sie dann:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Stoppen Sie den CT, unmounten Sie die Festplatte auf dem HOST und mounten Sie sie erneut mit:", "Stop the VM/CT before formatting this disk.": "Stoppen Sie die VM/CT, bevor Sie diese Festplatte formatieren.", @@ -7372,6 +7397,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "Die ausgewählte Intel-GPU verfügt über Nicht-FLR-Reset-Unterstützung und einen unbekannten Subtyp", "The selected Intel GPU is currently in power state D3cold": "Die ausgewählte Intel-GPU befindet sich derzeit im Energiezustand D3cold", "The selected Intel render device does not exist:": "Das ausgewählte Intel-Rendergerät existiert nicht:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Das ausgewählte USB-Gerät steht lokalen Anwendungen und Gästen nicht mehr zur Verfügung. Nur ein entfernter Client kann es gleichzeitig verwenden. Dieses Gerät freigeben?", "The selected VM": "Die ausgewählte VM", "The selected VM is running.": "Die ausgewählte VM läuft.", "The selected base folder does not exist and could not be created:": "Der ausgewählte Basisordner existiert nicht und konnte nicht erstellt werden:", @@ -7711,6 +7737,9 @@ "USB drives mounted now:": "Jetzt gemountete USB-Laufwerke:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "USB- oder serieller Geräteknoten", + "USB/IP configuration updated. Open status to check the connection.": "USB/IP-Konfiguration aktualisiert. Öffnen Sie den Status, um die Verbindung zu prüfen.", + "USB/IP over SSH": "USB/IP über SSH", + "USB/IP server IP address or DNS hostname:": "IP-Adresse oder DNS-Hostname des USB/IP-Servers:", "UUP Dump script not found.": "UUP-Dump-Skript nicht gefunden.", "UUp Dump ISO creator Custom": "UUp Dump ISO-Ersteller Benutzerdefiniert", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity ist ein kostenloser, leichter und benutzerfreundlicher Heimserver für Ihre Comics und E-Books. Verwenden Sie es, um von überall auf Ihre Dateien zuzugreifen, mit einem Tablet, einem E-Reader, einem Telefon oder einem Computer.", @@ -7867,6 +7896,7 @@ "Untrusted or modified NVIDIA hook": "Nicht vertrauenswürdiger oder modifizierter NVIDIA-Hook", "Unused image removed from the cache:": "Nicht verwendetes Bild aus dem Cache entfernt:", "Unused images removed from the cache:": "Nicht verwendete Bilder aus dem Cache entfernt:", + "Unused local loopback TCP port for this device:": "Freier lokaler Loopback-TCP-Port für dieses Gerät:", "Update": "Aktualisierung", "Update Available": "Update verfügbar", "Update Ceph repository (Only if using Ceph):": "Ceph-Repository aktualisieren (nur bei Verwendung von Ceph):", @@ -8148,6 +8178,7 @@ "View Disk Storages": "Festplattenspeicher anzeigen", "View Mount Points": "Mount-Punkte anzeigen", "View NFS Mounts (pvesm + fstab)": "NFS-Mounts anzeigen (pvesm + fstab)", + "View USB/IP status": "USB/IP-Status anzeigen", "View backup metadata": "Sicherungsmetadaten anzeigen", "View current paths": "Aktuelle Pfade anzeigen", "View existing folders in /mnt": "Vorhandene Ordner in /mnt anzeigen", @@ -9021,36 +9052,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Festplattendaten werden NICHT gelöscht.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ Die Festplatte wird ausgehängt und aus /etc/fstab entfernt.", "⚠ The /etc/fstab entry will be removed.": "⚠ Der /etc/fstab-Eintrag wird entfernt.", - "⚠ The disk will be unmounted.": "⚠ Die Festplatte wird ausgehängt.", - "Absolute path of the client SSH private key:": "Absoluter Pfad des privaten SSH-Schlüssels des Clients:", - "Connect a remote USB device": "Entferntes USB-Gerät verbinden", - "Disable USB/IP server": "USB/IP-Server deaktivieren", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Den Server deaktivieren und alle von ProxMenux verwalteten USB-Geräte freigeben? Die gespeicherte Auswahl bleibt für die nächste Aktivierung erhalten.", - "Enable USB/IP server": "USB/IP-Server aktivieren", - "Install the USB/IP dependencies from the configured Debian repositories?": "USB/IP-Abhängigkeiten aus den konfigurierten Debian-Repositories installieren?", - "Linux guest setup and migration notes": "Hinweise zur Einrichtung und Migration von Linux-Gästen", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Keine geeigneten USB-Geräte gefunden. Hubs, Massenspeicher und Netzwerkadapter sind ausgeschlossen.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Wenn der USB/IP-Dienst unerwartet stoppt, beenden Sie die Freigabe, solange das Gerät noch angeschlossen ist. In seltenen Fällen ist es erst nach einem Neustart des Hosts wieder verfügbar.", - "No shared devices are available on this server.": "Auf diesem Server sind keine freigegebenen Geräte verfügbar.", - "Remove a remote USB connection": "Entfernte USB-Verbindung entfernen", - "Remove this connection and detach its USB device?": "Diese Verbindung entfernen und das USB-Gerät trennen?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Führen Sie den Client in der Linux-VM aus, die das USB-Gerät benötigt. Installieren Sie usbip, openssh-client und kmod und kopieren Sie usbip_manager.py an denselben Pfad wie auf dem Server. Richten Sie die Schlüsselauthentifizierung ein und prüfen Sie den Hostschlüssel des Servers, bevor Sie eine Verbindung hinzufügen. Der Client verwendet den Gastkernel und kann sich nach einer Migration erneut verbinden, während das physische USB-Gerät am Server bleibt. Unprivilegierte LXC und Home Assistant OS benötigen eine eigene Kernel-/Geräte- oder Add-on-Einrichtung. Ein physisches Gerät kann jeweils nur mit einem Client verbunden sein.", - "Run this menu as root.": "Führen Sie dieses Menü als root aus.", - "Select a saved USB/IP device:": "Gespeichertes USB/IP-Gerät auswählen:", - "Select the USB device to share:": "Freizugebendes USB-Gerät auswählen:", - "Select the remote USB device:": "Entferntes USB-Gerät auswählen:", - "Server SSH port:": "SSH-Port des Servers:", - "Share a local USB device": "Lokales USB-Gerät freigeben", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Geben Sie ausgewählte USB-Geräte über SSH frei oder verbinden Sie diesen Linux-Rechner mit einem USB/IP-Server.", - "Stop sharing a USB device": "USB-Gerätefreigabe beenden", - "Stop sharing this device? An attached remote client will disconnect.": "Freigabe dieses Geräts beenden? Ein verbundener entfernter Client wird getrennt.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Das ausgewählte USB-Gerät steht lokalen Anwendungen und Gästen nicht mehr zur Verfügung. Nur ein entfernter Client kann es gleichzeitig verwenden. Dieses Gerät freigeben?", - "USB/IP configuration updated. Open status to check the connection.": "USB/IP-Konfiguration aktualisiert. Öffnen Sie den Status, um die Verbindung zu prüfen.", - "USB/IP over SSH": "USB/IP über SSH", - "USB/IP server IP address or DNS hostname:": "IP-Adresse oder DNS-Hostname des USB/IP-Servers:", - "Unused local loopback TCP port for this device:": "Freier lokaler Loopback-TCP-Port für dieses Gerät:", - "View USB/IP status": "USB/IP-Status anzeigen", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorisiere zuerst einen eigenen öffentlichen Clientschlüssel auf dem Server. Das eingeschränkte USB/IP-Konto kann keine Shell starten oder andere Sockets weiterleiten. Prüfe vor dem Verbinden den Hostschlüssel des Servers; unbekannte Schlüssel werden abgelehnt.", - "Authorize a client SSH public key": "Öffentlichen SSH-Schlüssel eines Clients autorisieren", - "Path to the client SSH public key on this server:": "Pfad zum öffentlichen SSH-Schlüssel des Clients auf diesem Server:" + "⚠ The disk will be unmounted.": "⚠ Die Festplatte wird ausgehängt." } diff --git a/lang/es.json b/lang/es.json index 15af5f5d..457f5bdc 100644 --- a/lang/es.json +++ b/lang/es.json @@ -1,32 +1,4 @@ { - "USB/IP over SSH": "USB/IP mediante SSH", - "Run this menu as root.": "Ejecuta este menú como root.", - "USB/IP configuration updated. Open status to check the connection.": "Configuración de USB/IP actualizada. Abre el estado para comprobar la conexión.", - "Install the USB/IP dependencies from the configured Debian repositories?": "¿Instalar las dependencias de USB/IP desde los repositorios de Debian configurados?", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "No hay dispositivos USB compatibles. Se excluyen los concentradores, el almacenamiento masivo y los adaptadores de red.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Si el servicio USB/IP se detiene de forma inesperada, deja de compartir el dispositivo mientras sigue conectado para liberarlo. En casos excepcionales solo se libera reiniciando el host.", - "Select the USB device to share:": "Selecciona el dispositivo USB que quieres compartir:", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "El dispositivo USB dejará de estar disponible para las aplicaciones y los invitados locales. Solo puede usarlo un cliente remoto a la vez. ¿Compartirlo?", - "Select a saved USB/IP device:": "Selecciona un dispositivo USB/IP guardado:", - "USB/IP server IP address or DNS hostname:": "Dirección IP o nombre DNS del servidor USB/IP:", - "Server SSH port:": "Puerto SSH del servidor:", - "Absolute path of the client SSH private key:": "Ruta absoluta de la clave privada SSH del cliente:", - "No shared devices are available on this server.": "No hay dispositivos compartidos disponibles en este servidor.", - "Select the remote USB device:": "Selecciona el dispositivo USB remoto:", - "Unused local loopback TCP port for this device:": "Puerto TCP de loopback local libre para este dispositivo:", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Comparte dispositivos USB mediante SSH o conecta este equipo Linux a un servidor USB/IP.", - "View USB/IP status": "Ver el estado de USB/IP", - "Enable USB/IP server": "Activar el servidor USB/IP", - "Share a local USB device": "Compartir un dispositivo USB local", - "Stop sharing a USB device": "Dejar de compartir un dispositivo USB", - "Disable USB/IP server": "Desactivar el servidor USB/IP", - "Connect a remote USB device": "Conectar un dispositivo USB remoto", - "Remove a remote USB connection": "Eliminar una conexión USB remota", - "Linux guest setup and migration notes": "Configuración del invitado Linux y notas sobre migración", - "Stop sharing this device? An attached remote client will disconnect.": "¿Dejar de compartir este dispositivo? Se desconectará el cliente remoto que lo esté usando.", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "¿Desactivar el servidor y liberar todos los dispositivos USB gestionados por ProxMenux? La selección guardada se conserva para la próxima activación.", - "Remove this connection and detach its USB device?": "¿Eliminar esta conexión y desconectar su dispositivo USB?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Ejecuta el cliente dentro de la VM Linux que necesita el USB. Instala usbip, openssh-client y kmod y copia usbip_manager.py en la misma ruta que en el servidor. Configura la autenticación por clave y verifica la clave del servidor antes de añadir la conexión. El cliente usa el kernel del invitado y puede reconectarse después de migrarlo mientras el USB físico sigue en el servidor. Los LXC sin privilegios y Home Assistant OS necesitan su propia configuración de kernel, dispositivos o complementos. Solo un cliente puede usar cada dispositivo físico a la vez.", "# Alternative if you prefer screen": "# Alternativa si prefieres la pantalla", "# Recommended: avoids disconnection during upgrade": "# Recomendado: evita la desconexión durante la actualización", "%s of %s updates failed — see the messages above.": "Han fallado %s de %s actualizaciones: revisa los mensajes anteriores.", @@ -273,6 +245,7 @@ "Aborted": "Abortado", "About to restore": "A punto de restaurar", "Absolute directory path to use as backup target:": "Ruta absoluta del directorio para usar como destino del backup:", + "Absolute path of the client SSH private key:": "Ruta absoluta de la clave privada SSH del cliente:", "Absolute path to a file or directory you want backed up:": "Ruta absoluta de un archivo o directorio del que desea hacer backup:", "Acceleration": "Aceleración", "Acceleration configuration cancelled": "Configuración de aceleración cancelada", @@ -645,6 +618,8 @@ "Authentication:": "Autenticación:", "Authorization failed": "Autorización fallida", "Authorization successful": "Autorización correcta", + "Authorize a client SSH public key": "Autorizar una clave pública SSH de un cliente", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autoriza primero una clave pública dedicada del cliente en el servidor. La cuenta restringida de USB/IP no puede abrir una shell ni redirigir otros sockets. Verifica la clave del servidor antes de conectarte; las claves desconocidas se rechazan.", "Authorize this key on the server": "Autorizar esta clave en el servidor", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autorizar a través de 'pct exec' (el servidor Borg es un LXC en un host PVE en el que puedo acceder mediante SSH)", "Authorized": "Autorizado", @@ -1327,6 +1302,7 @@ "Conflicting utilities removed": "Se eliminaron las utilidades conflictivas", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Conecta dispositivos Zigbee a MQTT mediante una interfaz web de configuración.", "Connect a Coral Accelerator and try again.": "Conecta un Coral Accelerator y vuelve a intentarlo.", + "Connect a remote USB device": "Conectar un dispositivo USB remoto", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Conéctalo, o elimínalo del contenedor en Proxmox (Recursos), y vuelve a lanzar la recuperación.", "Connect your devices and users together in your own secure virtual private network.": "Conecta tus dispositivos y usuarios en tu propia red privada virtual segura.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Conecta tus dispositivos en una red overlay segura basada en WireGuard®, con SSO, MFA y controles de acceso granulares.", @@ -1987,12 +1963,14 @@ "Directus administrator": "Administrador de Directus", "Disable NIC Offloading (Intel e1000e)": "Desactivar offloading de NIC (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Desactiva Secure Boot en el firmware UEFI y vuelve a ejecutar el instalador. No se ha cambiado nada.", + "Disable USB/IP server": "Desactivar el servidor USB/IP", "Disable autostart on conflicting VM": "Deshabilitar el inicio automático en VM en conflicto", "Disable autostart on one VM to avoid startup conflicts.": "Desactiva el inicio automático en una VM para evitar conflictos de inicio.", "Disable job": "Desactivar trabajo", "Disable kernel audit messages (optional but recommended):": "Desactivar los mensajes de auditoría del kernel (opcional pero recomendado):", "Disable onboot on affected VM(s)/CT(s)": "Deshabilitar el arranque en las VM/CT afectadas", "Disable portmapper/rpcbind": "Desactivar portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "¿Desactivar el servidor y liberar todos los dispositivos USB gestionados por ProxMenux? La selección guardada se conserva para la próxima activación.", "Disabled": "Desactivado", "Disabling High Availability services...": "Deshabilitando los servicios de alta disponibilidad...", "Disabling ZFS autotrim applied by ProxMenux...": "Deshabilitando el recorte automático ZFS aplicado por ProxMenux...", @@ -2225,6 +2203,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Activa el Escritorio remoto (RDP) antes de desactivar la pantalla virtual.", "Enable SSD emulation for this disk?": "¿Habilitar la emulación SSD para este disco?", "Enable TCP BBR/Fast Open control": "Activar control TCP BBR/Fast Open", + "Enable USB/IP server": "Activar el servidor USB/IP", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Activar la transcodificación VA-API y el mapeo de tonos de HDR10/Dolby Vision a SDR", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Activar VA-API, la codificación por hardware y el mapeo de tonos OpenCL en Jellyfin", "Enable VFIO IOMMU support": "Activar soporte VFIO IOMMU", @@ -3236,6 +3215,7 @@ "If pvesm path returned a DEVICE (LVM):": "Si pvesm path devolvió un DISPOSITIVO (LVM):", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Si pvesm path devolvió un DIRECTORIO (ZFS/BTRFS):", "If repositories error:": "Si hay error en los repositorios:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Si el servicio USB/IP se detiene de forma inesperada, deja de compartir el dispositivo mientras sigue conectado para liberarlo. En casos excepcionales solo se libera reiniciando el host.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Si el contenedor ya se había modificado, se restaura su backup nativo anterior. Los directorios compartidos del host no se revierten. Los discos del intento fallido se eliminan si la limpieza termina bien.", "If the host freezes, remove hostpci entries from": "Si el host se congela, elimina las entradas hostpci de", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If the update fails after the container was changed, the backup is restored. An update that stops halfway is recovered from the OCI management menu.": "Si el canal de imagen tiene una versión nueva, el CT se detiene, se hace un backup, se verifica y se sustituye por la nueva imagen, actualizando el contenedor. Si la actualización falla después de modificar el contenedor, se restaura el backup. Una actualización que se queda a medias se recupera desde el menú de gestión OCI.", @@ -3430,6 +3410,7 @@ "Install server packages inside CT:": "Instalar paquetes de servidor dentro de CT:", "Install terminal multiplexers": "Instalar multiplexores de terminales", "Install the Edge TPU runtime (libedgetpu1-std)": "Instalar el tiempo de ejecución de Edge TPU (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "¿Instalar las dependencias de USB/IP desde los repositorios de Debian configurados?", "Install this image?": "¿Instalar esta imagen?", "Install with Cloud-Init script": "Instalar con el script Cloud-Init", "Install with ISO from UUP Dump": "Instalar con ISO desde UUP Dump", @@ -3914,6 +3895,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Línea para pegar (una sola línea, incluido el prefijo \"comando=...\"):", "LinkStack": "LinkStack", "Linux Installation Options": "Opciones de instalación de Linux", + "Linux guest setup and migration notes": "Configuración del invitado Linux y notas sobre migración", "Linux/Mac path:": "Ruta Linux/Mac:", "LinuxServer Jellyfin with optional GPU passthrough": "Jellyfin de LinuxServer con passthrough de GPU opcional", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB requiere un usuario, base de datos y contraseña", @@ -4670,6 +4652,7 @@ "No duplicate IP addresses": "Sin direcciones IP duplicadas", "No duplicate repositories found": "No se encontraron repositorios duplicados", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "No quedan dispositivos de controlador/NVMe elegibles después del filtrado SR-IOV. Salto a la comba.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "No hay dispositivos USB compatibles. Se excluyen los concentradores, el almacenamiento masivo y los adaptadores de red.", "No eligible controllers remain after SR-IOV filtering.": "No quedan controladores elegibles después del filtrado SR-IOV.", "No encryption key is stored on this host. Choose how to set one up:": "No se almacena ninguna clave de cifrado en este host. Elige cómo configurar una:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "No se encontraron discos de VM exportables (se excluyen CD-ROM/cloud-init).", @@ -4754,6 +4737,7 @@ "No self-test log available for": "No hay ningún log de autoprueba disponible para", "No server IP or hostname provided.": "No se proporcionó ninguna IP de servidor ni nombre de host.", "No share access test succeeded with guest authentication.": "Ninguna prueba de acceso a recursos compartidos funcionó con autenticación de invitado.", + "No shared devices are available on this server.": "No hay dispositivos compartidos disponibles en este servidor.", "No shared media content.": "No hay contenido multimedia compartido.", "No shared mount detected. Applying standard local access.": "No se detectó ningún montaje compartido. Aplicando acceso local estándar.", "No shares configured.": "No hay recursos compartidos configurados.", @@ -5149,6 +5133,7 @@ "Path of the Compose file": "Ruta del archivo Compose", "Path of the oci-compose file": "Ruta del archivo oci-compose", "Path removed:": "Ruta eliminada:", + "Path to the client SSH public key on this server:": "Ruta de la clave pública SSH del cliente en este servidor:", "Path:": "Ruta:", "Paths applied:": "Rutas aplicadas:", "Paths included in backup": "Rutas incluidas en el backup", @@ -5686,6 +5671,7 @@ "Remove Proxmox NFS storage:": "Eliminar el almacenamiento Proxmox NFS:", "Remove Proxmox iSCSI storage:": "Eliminar el almacenamiento iSCSI de Proxmox:", "Remove Secure Gateway? State will be preserved.": "¿Eliminar Secure Gateway? Se conservará el estado.", + "Remove a remote USB connection": "Eliminar una conexión USB remota", "Remove custom paths": "Eliminar rutas personalizadas", "Remove disk references from affected VM(s)/CT(s) config": "Eliminar referencias de disco de la configuración de VM/CT(s) afectados", "Remove every registered gasket DKMS version": "Eliminar todas las versiones de gasket registradas en DKMS", @@ -5706,6 +5692,7 @@ "Remove the lock left on a container by an interrupted task": "Quitar el bloqueo que deja en un contenedor una tarea interrumpida", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "¿Eliminar las credenciales guardadas de {registry}?\nLas aplicaciones en marcha seguirán funcionando.", "Remove the unprivileged flag from configuration:": "Elimina el flag unprivileged de la configuración:", + "Remove this connection and detach its USB device?": "¿Eliminar esta conexión y desconectar su dispositivo USB?", "Remove unused packages and their config": "Eliminar paquetes no utilizados y su configuración", "Remove: delete the application and its containers": "Eliminar: la aplicación y sus contenedores", "Removed": "Remoto", @@ -5928,9 +5915,11 @@ "Run mode: Unattended": "Modo de ejecución: desatendido", "Run now": "Ejecutar ahora", "Run security audit now": "Ejecutar la auditoría de seguridad ahora", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Ejecuta el cliente dentro de la VM Linux que necesita el USB. Instala usbip, openssh-client y kmod y copia usbip_manager.py en la misma ruta que en el servidor. Configura la autenticación por clave y verifica la clave del servidor antes de añadir la conexión. El cliente usa el kernel del invitado y puede reconectarse después de migrarlo mientras el USB físico sigue en el servidor. Los LXC sin privilegios y Home Assistant OS necesitan su propia configuración de kernel, dispositivos o complementos. Solo un cliente puede usar cada dispositivo físico a la vez.", "Run the following inside the VM:": "Ejecuta lo siguiente dentro de la VM:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Ejecuta el cambio de canal de versiones desde una sesión SSH o la consola del host Proxmox con:", "Run the update from an SSH session or the Proxmox host console with:": "Ejecuta la actualización desde una sesión SSH o la consola del host Proxmox con:", + "Run this menu as root.": "Ejecuta este menú como root.", "Run this operation as root.": "Ejecuta esta operación como root.", "Run upgrade checklist script:": "Ejecuta el script de la lista de verificación de actualización:", "Running": "En ejecución", @@ -6155,6 +6144,7 @@ "Select a new language for the menu:": "Selecciona un nuevo idioma para el menú:", "Select a post-installation script:": "Selecciona un script de post-instalación:", "Select a pre-configured Linux VM script to execute:": "Selecciona un script de VM Linux preconfigurado para ejecutar:", + "Select a saved USB/IP device:": "Selecciona un dispositivo USB/IP guardado:", "Select a script or action:": "Selecciona un script o acción:", "Select a share to delete:": "Selecciona un recurso compartido para eliminar:", "Select a specific Coral or USB node, not the whole /dev": "Selecciona un Coral específico o nodo USB, no todo /dev", @@ -6232,6 +6222,7 @@ "Select the Linux distribution to install:": "Selecciona la distribución de Linux para instalar:", "Select the NAS system to install:": "Selecciona el sistema NAS a instalar:", "Select the NVIDIA driver version to install:": "Selecciona la versión del controlador NVIDIA para instalar:", + "Select the USB device to share:": "Selecciona el dispositivo USB que quieres compartir:", "Select the VM to add the GPU to:": "Selecciona la VM a la que añadir la GPU:", "Select the VM to which you want to add disks:": "Selecciona la VM a la que deseas añadir discos:", "Select the VM where you want to import the disk image:": "Selecciona la VM donde deseas importar la imagen del disco:", @@ -6256,6 +6247,7 @@ "Select the parent job to attach to:": "Selecciona el trabajo principal al que adjuntarlo:", "Select the paths to restore (one per backup entry):": "Selecciona las rutas para restaurar (una por entrada de backup):", "Select the privileged LXC container to convert:": "Selecciona el contenedor LXC privilegiado para convertir:", + "Select the remote USB device:": "Selecciona el dispositivo USB remoto:", "Select the storage that will receive the backups:": "Selecciona el almacenamiento que recibirá los backups:", "Select the storage volume for disk import:": "Selecciona el volumen de almacenamiento para la importación de disco:", "Select the sync interval (in hours):": "Selecciona el intervalo de sincronización (en horas):", @@ -6342,6 +6334,7 @@ "Server IDs to test against, separated by commas (optional)": "ID de los servidores contra los que probar, separados por comas (opcional)", "Server IP/hostname is correct": "La IP/nombre de host del servidor es correcta", "Server IP:": "IP del servidor:", + "Server SSH port:": "Puerto SSH del servidor:", "Server is accessible:": "El servidor es accesible:", "Server is online": "El servidor está en línea", "Server is running": "El servidor está funcionando", @@ -6403,6 +6396,7 @@ "Share Access Error": "Error de acceso al recurso compartido", "Share Name": "Nombre compartido", "Share Options": "Opciones para compartir", + "Share a local USB device": "Compartir un dispositivo USB local", "Share added successfully.": "Recurso compartido añadido correctamente.", "Share deleted and Samba service restarted.": "Compartir eliminado y servicio Samba reiniciado.", "Share exists:": "Compartir existe:", @@ -6410,6 +6404,7 @@ "Share name:": "Nombre compartido:", "Share not found on server:": "Compartir no encontrado en el servidor:", "Share path:": "Compartir ruta:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Comparte dispositivos USB mediante SSH o conecta este equipo Linux a un servidor USB/IP.", "Share updated successfully.": "Compartir actualizado con éxito.", "Share:": "Compartir:", "ShareCoveX panel": "Panel de ShareCoveX", @@ -6679,6 +6674,8 @@ "Still has issues": "Todavía tiene problemas", "Stop - shuts the guest down during backup": "Stop - apaga la VM o CT durante el backup", "Stop it first and run this option again.": "Detenlo primero y ejecuta esta opción nuevamente.", + "Stop sharing a USB device": "Dejar de compartir un dispositivo USB", + "Stop sharing this device? An attached remote client will disconnect.": "¿Dejar de compartir este dispositivo? Se desconectará el cliente remoto que lo esté usando.", "Stop that VM, then choose:": "Detén ese VM, luego elige:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Detén el CT, desmonta el disco en el HOST y vuelve a montarlo con:", "Stop the VM/CT before formatting this disk.": "Detén el VM/CT antes de formatear este disco.", @@ -7375,6 +7372,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "La GPU Intel seleccionada tiene soporte de reinicio no FLR y subtipo desconocido", "The selected Intel GPU is currently in power state D3cold": "La GPU Intel seleccionada se encuentra actualmente en estado de energía D3cold", "The selected Intel render device does not exist:": "El dispositivo de renderización Intel seleccionado no existe:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "El dispositivo USB dejará de estar disponible para las aplicaciones y los invitados locales. Solo puede usarlo un cliente remoto a la vez. ¿Compartirlo?", "The selected VM": "La máquina virtual seleccionada", "The selected VM is running.": "La VM seleccionada se está ejecutando.", "The selected base folder does not exist and could not be created:": "La carpeta base seleccionada no existe y no se pudo crear:", @@ -7712,6 +7710,9 @@ "USB drives mounted now:": "Unidades USB montadas ahora:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "Nodo de dispositivo USB o serie", + "USB/IP configuration updated. Open status to check the connection.": "Configuración de USB/IP actualizada. Abre el estado para comprobar la conexión.", + "USB/IP over SSH": "USB/IP mediante SSH", + "USB/IP server IP address or DNS hostname:": "Dirección IP o nombre DNS del servidor USB/IP:", "UUP Dump script not found.": "No se encontró el script de UUP Dump.", "UUp Dump ISO creator Custom": "Creador de ISO personalizada con UUP Dump", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity es un servidor doméstico gratuito, ligero y fácil de usar para tus cómics y ebooks. Úsalo para acceder a tus archivos desde cualquier lugar, con una tableta, un lector electrónico, un teléfono o un ordenador.", @@ -7866,6 +7867,7 @@ "Untrusted or modified NVIDIA hook": "Hook NVIDIA sin confianza o modificado", "Unused image removed from the cache:": "Imagen sin uso eliminada de la caché:", "Unused images removed from the cache:": "Imágenes sin uso eliminadas de la caché:", + "Unused local loopback TCP port for this device:": "Puerto TCP de loopback local libre para este dispositivo:", "Update": "Actualización", "Update Available": "Actualización disponible", "Update Ceph repository (Only if using Ceph):": "Actualiza el repositorio de Ceph (solo si usas Ceph):", @@ -8149,6 +8151,7 @@ "View Disk Storages": "Ver almacenamientos en disco", "View Mount Points": "Ver puntos de montaje", "View NFS Mounts (pvesm + fstab)": "Ver montajes NFS (pvesm + fstab)", + "View USB/IP status": "Ver el estado de USB/IP", "View backup metadata": "Ver metadatos de backup", "View current paths": "Ver rutas actuales", "View existing folders in /mnt": "Ver carpetas existentes en /mnt", @@ -9019,8 +9022,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Los datos del disco NO se borrarán.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ El disco se desmontará y se eliminará de /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ Se eliminará la entrada /etc/fstab.", - "⚠ The disk will be unmounted.": "⚠ El disco se desmontará.", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autoriza primero una clave pública dedicada del cliente en el servidor. La cuenta restringida de USB/IP no puede abrir una shell ni redirigir otros sockets. Verifica la clave del servidor antes de conectarte; las claves desconocidas se rechazan.", - "Authorize a client SSH public key": "Autorizar una clave pública SSH de un cliente", - "Path to the client SSH public key on this server:": "Ruta de la clave pública SSH del cliente en este servidor:" + "⚠ The disk will be unmounted.": "⚠ El disco se desmontará." } diff --git a/lang/fr.json b/lang/fr.json index f1714e7a..5b584a87 100644 --- a/lang/fr.json +++ b/lang/fr.json @@ -246,6 +246,7 @@ "Aborted": "Avorté", "About to restore": "Sur le point de restaurer", "Absolute directory path to use as backup target:": "Chemin du répertoire absolu à utiliser comme cible de sauvegarde :", + "Absolute path of the client SSH private key:": "Chemin absolu de la clé privée SSH du client :", "Absolute path to a file or directory you want backed up:": "Chemin absolu vers un fichier ou un répertoire que vous souhaitez sauvegarder :", "Acceleration": "Accélération", "Acceleration configuration cancelled": "Configuration d'accélération annulée", @@ -619,6 +620,8 @@ "Authentication:": "Authentification:", "Authorization failed": "L'autorisation a échoué", "Authorization successful": "Autorisation réussie", + "Authorize a client SSH public key": "Autoriser la clé publique SSH d’un client", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorisez d’abord une clé publique dédiée au client sur le serveur. Le compte USB/IP restreint ne peut ni ouvrir de shell ni rediriger d’autres sockets. Vérifiez la clé d’hôte du serveur avant la connexion ; les clés inconnues sont refusées.", "Authorize this key on the server": "Autoriser cette clé sur le serveur", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autoriser via 'pct exec' (le serveur Borg est un LXC sur un hôte PVE sur lequel je peux me connecter en SSH)", "Authorized": "Autorisé", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Utilitaires en conflit supprimés", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Connectez les appareils Zigbee à MQTT via une interface web de configuration.", "Connect a Coral Accelerator and try again.": "Connectez un accélérateur Coral et réessayez.", + "Connect a remote USB device": "Connecter un périphérique USB distant", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Connectez-le ou supprimez-le du conteneur dans Proxmox (Ressources) et réexécutez la récupération.", "Connect your devices and users together in your own secure virtual private network.": "Connectez vos appareils et utilisateurs ensemble dans votre propre réseau privé virtuel sécurisé.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Connectez vos appareils à un réseau de superposition sécurisé basé sur WireGuard® avec des contrôles d'accès SSO, MFA et granulaires.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Administrateur Directus", "Disable NIC Offloading (Intel e1000e)": "Désactiver le déchargement de la carte réseau (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Désactivez Secure Boot dans le firmware UEFI et relancez le programme d'installation. Rien n'a été modifié.", + "Disable USB/IP server": "Désactiver le serveur USB/IP", "Disable autostart on conflicting VM": "Désactiver le démarrage automatique sur la VM en conflit", "Disable autostart on one VM to avoid startup conflicts.": "Désactivez le démarrage automatique sur une VM pour éviter les conflits de démarrage.", "Disable job": "Désactiver le travail", "Disable kernel audit messages (optional but recommended):": "Désactivez les messages d'audit du noyau (facultatif mais recommandé) :", "Disable onboot on affected VM(s)/CT(s)": "Désactiver le démarrage sur les VM/CT concernés", "Disable portmapper/rpcbind": "Désactiver portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Désactiver le serveur et libérer tous les périphériques USB gérés par ProxMenux ? Les sélections enregistrées seront conservées pour la prochaine activation.", "Disabled": "Désactivé", "Disabling High Availability services...": "Désactivation des services haute disponibilité...", "Disabling ZFS autotrim applied by ProxMenux...": "Désactivation du découpage automatique ZFS appliqué par ProxMenux...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Activez le Bureau à distance (RDP) avant de désactiver l'affichage virtuel.", "Enable SSD emulation for this disk?": "Activer l'émulation SSD pour ce disque ?", "Enable TCP BBR/Fast Open control": "Activer le contrôle TCP BBR/Fast Open", + "Enable USB/IP server": "Activer le serveur USB/IP", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Activer le transcodage VA-API et HDR10/Dolby Vision pour la cartographie des tons SDR", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Activer le VA-API, l'encodage matériel et la cartographie des tons OpenCL dans Jellyfin", "Enable VFIO IOMMU support": "Activer la prise en charge de VFIO IOMMU", @@ -3212,6 +3219,7 @@ "If pvesm path returned a DEVICE (LVM):": "Si pvesm path a renvoyé un PÉRIPHÉRIQUE (LVM) :", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Si pvesm path a renvoyé un RÉPERTOIRE (ZFS/BTRFS) :", "If repositories error:": "Si erreur de référentiels :", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Si le service USB/IP s'arrête de manière inattendue, arrêtez le partage tant que le périphérique est encore branché pour le libérer. Dans de rares cas, seul un redémarrage de l'hôte le libère.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Si le conteneur a déjà été modifié, sa sauvegarde native précédente est restaurée. Les répertoires hôtes partagés ne sont pas rétablis. Les disques de la tentative ayant échoué sont supprimés une fois le nettoyage réussi.", "If the host freezes, remove hostpci entries from": "Si l'hôte se bloque, supprimez les entrées hostpci de", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Si le canal d'image a une nouvelle version, le CT est arrêté, sauvegardé et vérifié, puis remplacé par la nouvelle image pour mettre à jour le conteneur. Si quelque chose échoue, la sauvegarde est restaurée.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Installez les packages de serveur dans CT :", "Install terminal multiplexers": "Installer des multiplexeurs de terminaux", "Install the Edge TPU runtime (libedgetpu1-std)": "Installez le runtime Edge TPU (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "Installer les dépendances USB/IP depuis les dépôts Debian configurés ?", "Install this image?": "Installer cette image ?", "Install with Cloud-Init script": "Installer avec le script Cloud-Init", "Install with ISO from UUP Dump": "Installer avec ISO à partir de UUP Dump", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Ligne à coller (une seule ligne, incluant le préfixe \"command=...\") :", "LinkStack": "LinkStack", "Linux Installation Options": "Options d'installation Linux", + "Linux guest setup and migration notes": "Configuration des invités Linux et notes de migration", "Linux/Mac path:": "Chemin Linux/Mac :", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin avec passage GPU optionnel", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB requires un utilisateur, une base de données et un mot de passe", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Pas d'adresses IP en double", "No duplicate repositories found": "Aucun référentiel en double trouvé", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Il ne reste aucun périphérique contrôleur/NVMe éligible après le filtrage SR-IOV. Saut.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Aucun périphérique USB éligible trouvé. Les concentrateurs, les périphériques de stockage de masse et les adaptateurs réseau sont exclus.", "No eligible controllers remain after SR-IOV filtering.": "Il ne reste aucun contrôleur éligible après le filtrage SR-IOV.", "No encryption key is stored on this host. Choose how to set one up:": "Aucune clé de cryptage n’est stockée sur cet hôte. Choisissez comment en configurer un :", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Aucun disque de VM exportable n'a été trouvé (les CD-ROM/cloud-init sont exclus).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Aucun journal d'autotest disponible pour", "No server IP or hostname provided.": "Aucune adresse IP de serveur ou nom d'hôte fourni.", "No share access test succeeded with guest authentication.": "Aucun test d'accès au partage n'a réussi avec l'authentification des invités.", + "No shared devices are available on this server.": "Aucun périphérique partagé n'est disponible sur ce serveur.", "No shared media content.": "Pas de contenu multimédia partagé.", "No shared mount detected. Applying standard local access.": "Aucun montage partagé détecté. Application d'un accès local standard.", "No shares configured.": "Aucun partage configuré.", @@ -5130,6 +5142,7 @@ "Path of the Compose file": "Chemin du fichier Composer", "Path of the oci-compose file": "Chemin du fichier oci-compose", "Path removed:": "Chemin supprimé :", + "Path to the client SSH public key on this server:": "Chemin de la clé publique SSH du client sur ce serveur :", "Path:": "Chemin:", "Paths applied:": "Chemins appliqués :", "Paths included in backup": "Chemins inclus dans la sauvegarde", @@ -5675,6 +5688,7 @@ "Remove Proxmox NFS storage:": "Supprimez le stockage Proxmox NFS :", "Remove Proxmox iSCSI storage:": "Supprimez le stockage iSCSI Proxmox :", "Remove Secure Gateway? State will be preserved.": "Supprimer Secure Gateway ? L'État sera préservé.", + "Remove a remote USB connection": "Supprimer une connexion USB distante", "Remove custom paths": "Supprimer les chemins personnalisés", "Remove disk references from affected VM(s)/CT(s) config": "Supprimer les références de disque de la configuration des VM/CT concernées", "Remove every registered gasket DKMS version": "Supprimer toutes les versions DKMS de gasket enregistrées", @@ -5695,6 +5709,7 @@ "Remove the lock left on a container by an interrupted task": "Supprimer le verrou laissé sur un conteneur par une tâche interrompue", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Supprimer les informations d'identification enregistrées pour {registry} ?\nLes applications en cours d’exécution continueront de fonctionner.", "Remove the unprivileged flag from configuration:": "Supprimez l'indicateur sans privilèges de la configuration :", + "Remove this connection and detach its USB device?": "Supprimer cette connexion et détacher son périphérique USB ?", "Remove unused packages and their config": "Supprimer les packages inutilisés et leur configuration", "Remove: delete the application and its containers": "Supprimer: supprimer l'application et ses conteneurs", "Removed": "Supprimé", @@ -5917,9 +5932,11 @@ "Run mode: Unattended": "Mode d'exécution : sans surveillance", "Run now": "Exécuter maintenant", "Run security audit now": "Exécutez un audit de sécurité maintenant", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Exécutez le client dans la VM Linux qui a besoin du périphérique USB. Installez usbip, openssh-client et kmod, puis copiez usbip_manager.py au même chemin que sur le serveur. Configurez l'authentification par clé et vérifiez la clé d'hôte du serveur avant d'ajouter une connexion. Le client utilise le noyau de l'invité et peut se reconnecter après une migration tandis que le périphérique USB physique reste sur le serveur. Les LXC non privilégiés et Home Assistant OS nécessitent une configuration spécifique du noyau, des périphériques ou des modules complémentaires. Un périphérique physique ne peut être attaché qu'à un seul client à la fois.", "Run the following inside the VM:": "Exécutez la commande suivante dans la VM :", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Exécutez le commutateur de canal de version à partir d'une session SSH ou de la console hôte Proxmox avec :", "Run the update from an SSH session or the Proxmox host console with:": "Exécutez la mise à jour depuis une session SSH ou la console hôte Proxmox avec :", + "Run this menu as root.": "Exécutez ce menu en tant que root.", "Run this operation as root.": "Exécutez cette opération en tant que root.", "Run upgrade checklist script:": "Exécutez le script de liste de contrôle de mise à niveau :", "Running": "En cours d'exécution", @@ -6144,6 +6161,7 @@ "Select a new language for the menu:": "Sélectionnez une nouvelle langue pour le menu :", "Select a post-installation script:": "Sélectionnez un script de post-installation :", "Select a pre-configured Linux VM script to execute:": "Sélectionnez un script de machine virtuelle Linux préconfiguré à exécuter :", + "Select a saved USB/IP device:": "Sélectionnez un périphérique USB/IP enregistré :", "Select a script or action:": "Sélectionnez un script ou une action :", "Select a share to delete:": "Sélectionnez un partage à supprimer :", "Select a specific Coral or USB node, not the whole /dev": "Sélectionnez un noeud spécifique Coral ou USB, pas l'ensemble /dev", @@ -6221,6 +6239,7 @@ "Select the Linux distribution to install:": "Sélectionnez la distribution Linux à installer :", "Select the NAS system to install:": "Sélectionnez le système NAS à installer :", "Select the NVIDIA driver version to install:": "Sélectionnez la version du pilote NVIDIA à installer :", + "Select the USB device to share:": "Sélectionnez le périphérique USB à partager :", "Select the VM to add the GPU to:": "Sélectionnez la VM à laquelle ajouter le GPU :", "Select the VM to which you want to add disks:": "Sélectionnez la VM à laquelle vous souhaitez ajouter des disques :", "Select the VM where you want to import the disk image:": "Sélectionnez la VM sur laquelle vous souhaitez importer l'image disque :", @@ -6245,6 +6264,7 @@ "Select the parent job to attach to:": "sélectionnez la tâche parent à attacher :", "Select the paths to restore (one per backup entry):": "Sélectionnez les chemins à restaurer (un par entrée de sauvegarde) :", "Select the privileged LXC container to convert:": "Sélectionnez le conteneur LXC privilégié à convertir :", + "Select the remote USB device:": "Sélectionnez le périphérique USB distant :", "Select the storage that will receive the backups:": "Sélectionnez le stockage qui recevra les sauvegardes :", "Select the storage volume for disk import:": "Sélectionnez le volume de stockage pour l'importation de disque :", "Select the sync interval (in hours):": "Sélectionnez l'intervalle de synchronisation (en heures) :", @@ -6331,6 +6351,7 @@ "Server IDs to test against, separated by commas (optional)": "ID de serveur à tester, séparés par des virgules (facultatif)", "Server IP/hostname is correct": "L'adresse IP/le nom d'hôte du serveur est correct", "Server IP:": "IP du serveur :", + "Server SSH port:": "Port SSH du serveur :", "Server is accessible:": "Le serveur est accessible :", "Server is online": "Le serveur est en ligne", "Server is running": "Le serveur est en cours d'exécution", @@ -6392,6 +6413,7 @@ "Share Access Error": "Erreur d'accès au partage", "Share Name": "Partager le nom", "Share Options": "Options de partage", + "Share a local USB device": "Partager un périphérique USB local", "Share added successfully.": "Partage ajouté avec succès.", "Share deleted and Samba service restarted.": "Partage supprimé et service Samba redémarré.", "Share exists:": "Le partage existe :", @@ -6399,6 +6421,7 @@ "Share name:": "Nom du partage :", "Share not found on server:": "Partage introuvable sur le serveur :", "Share path:": "Chemin de partage :", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Partagez les périphériques USB sélectionnés via SSH ou connectez cette machine Linux à un serveur USB/IP.", "Share updated successfully.": "Partage mis à jour avec succès.", "Share:": "Partager:", "ShareCoveX panel": "Panneau ShareCoveX", @@ -6667,6 +6690,8 @@ "Still has issues": "A encore des problèmes", "Stop - shuts the guest down during backup": "Arrêter - arrête l'invité pendant la sauvegarde", "Stop it first and run this option again.": "Arrêtez-le d'abord et réexécutez cette option.", + "Stop sharing a USB device": "Arrêter le partage d'un périphérique USB", + "Stop sharing this device? An attached remote client will disconnect.": "Arrêter le partage de ce périphérique ? Tout client distant attaché sera déconnecté.", "Stop that VM, then choose:": "Arrêtez ce VM, puis choisissez :", "Stop the CT, unmount the disk on the HOST, and remount with:": "Arrêtez le CT, démontez le disque sur le HOST et remontez avec :", "Stop the VM/CT before formatting this disk.": "Arrêtez la VM/CT avant de formater ce disque.", @@ -7371,6 +7396,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "Le GPU Intel sélectionné prend en charge la réinitialisation non FLR et sous-type inconnu", "The selected Intel GPU is currently in power state D3cold": "Le GPU Intel sélectionné est actuellement en état d'alimentation D3cold", "The selected Intel render device does not exist:": "Le périphérique de rendu Intel sélectionné n'existe pas :", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Le périphérique USB sélectionné ne sera plus disponible pour les applications et les invités locaux. Un seul client distant peut l'utiliser à la fois. Partager ce périphérique ?", "The selected VM": "La VM sélectionnée", "The selected VM is running.": "La VM sélectionnée est en cours d'exécution.", "The selected base folder does not exist and could not be created:": "Le dossier de base sélectionné n'existe pas et n'a pas pu être créé :", @@ -7710,6 +7736,9 @@ "USB drives mounted now:": "Clés USB montées maintenant :", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "nœud de périphérique USB ou série", + "USB/IP configuration updated. Open status to check the connection.": "Configuration USB/IP mise à jour. Ouvrez l'état pour vérifier la connexion.", + "USB/IP over SSH": "USB/IP via SSH", + "USB/IP server IP address or DNS hostname:": "Adresse IP ou nom d'hôte DNS du serveur USB/IP :", "UUP Dump script not found.": "Script de vidage UUP introuvable.", "UUp Dump ISO creator Custom": "UUp Dump Créateur ISO Personnalisé", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity est un serveur à domicile gratuit, léger et facile à utiliser pour vos BD et ebooks. Utilisez-le pour accéder à vos fichiers de n'importe où, avec une tablette, un lecteur électronique, un téléphone ou un ordinateur.", @@ -7866,6 +7895,7 @@ "Untrusted or modified NVIDIA hook": "Crochet NVIDIA non fiable ou modifié", "Unused image removed from the cache:": "Image non utilisée retirée du cache :", "Unused images removed from the cache:": "Images inutilisées supprimées du cache :", + "Unused local loopback TCP port for this device:": "Port TCP local de bouclage inutilisé pour ce périphérique :", "Update": "Mise à jour", "Update Available": "mise à jour disponible", "Update Ceph repository (Only if using Ceph):": "Mettre à jour le référentiel Ceph (uniquement si vous utilisez Ceph) :", @@ -8147,6 +8177,7 @@ "View Disk Storages": "Afficher les stockages sur disque", "View Mount Points": "Afficher les points de montage", "View NFS Mounts (pvesm + fstab)": "Afficher les montages NFS (pvesm + fstab)", + "View USB/IP status": "Afficher l'état USB/IP", "View backup metadata": "Afficher les métadonnées de sauvegarde", "View current paths": "afficher les chemins actuels", "View existing folders in /mnt": "Afficher les dossiers existants dans /mnt", @@ -9020,36 +9051,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Les données du disque ne seront PAS effacées.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ Le disque sera démonté et supprimé de /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ L'entrée /etc/fstab sera supprimée.", - "⚠ The disk will be unmounted.": "⚠ Le disque sera démonté.", - "Absolute path of the client SSH private key:": "Chemin absolu de la clé privée SSH du client :", - "Connect a remote USB device": "Connecter un périphérique USB distant", - "Disable USB/IP server": "Désactiver le serveur USB/IP", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Désactiver le serveur et libérer tous les périphériques USB gérés par ProxMenux ? Les sélections enregistrées seront conservées pour la prochaine activation.", - "Enable USB/IP server": "Activer le serveur USB/IP", - "Install the USB/IP dependencies from the configured Debian repositories?": "Installer les dépendances USB/IP depuis les dépôts Debian configurés ?", - "Linux guest setup and migration notes": "Configuration des invités Linux et notes de migration", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Aucun périphérique USB éligible trouvé. Les concentrateurs, les périphériques de stockage de masse et les adaptateurs réseau sont exclus.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Si le service USB/IP s'arrête de manière inattendue, arrêtez le partage tant que le périphérique est encore branché pour le libérer. Dans de rares cas, seul un redémarrage de l'hôte le libère.", - "No shared devices are available on this server.": "Aucun périphérique partagé n'est disponible sur ce serveur.", - "Remove a remote USB connection": "Supprimer une connexion USB distante", - "Remove this connection and detach its USB device?": "Supprimer cette connexion et détacher son périphérique USB ?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Exécutez le client dans la VM Linux qui a besoin du périphérique USB. Installez usbip, openssh-client et kmod, puis copiez usbip_manager.py au même chemin que sur le serveur. Configurez l'authentification par clé et vérifiez la clé d'hôte du serveur avant d'ajouter une connexion. Le client utilise le noyau de l'invité et peut se reconnecter après une migration tandis que le périphérique USB physique reste sur le serveur. Les LXC non privilégiés et Home Assistant OS nécessitent une configuration spécifique du noyau, des périphériques ou des modules complémentaires. Un périphérique physique ne peut être attaché qu'à un seul client à la fois.", - "Run this menu as root.": "Exécutez ce menu en tant que root.", - "Select a saved USB/IP device:": "Sélectionnez un périphérique USB/IP enregistré :", - "Select the USB device to share:": "Sélectionnez le périphérique USB à partager :", - "Select the remote USB device:": "Sélectionnez le périphérique USB distant :", - "Server SSH port:": "Port SSH du serveur :", - "Share a local USB device": "Partager un périphérique USB local", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Partagez les périphériques USB sélectionnés via SSH ou connectez cette machine Linux à un serveur USB/IP.", - "Stop sharing a USB device": "Arrêter le partage d'un périphérique USB", - "Stop sharing this device? An attached remote client will disconnect.": "Arrêter le partage de ce périphérique ? Tout client distant attaché sera déconnecté.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Le périphérique USB sélectionné ne sera plus disponible pour les applications et les invités locaux. Un seul client distant peut l'utiliser à la fois. Partager ce périphérique ?", - "USB/IP configuration updated. Open status to check the connection.": "Configuration USB/IP mise à jour. Ouvrez l'état pour vérifier la connexion.", - "USB/IP over SSH": "USB/IP via SSH", - "USB/IP server IP address or DNS hostname:": "Adresse IP ou nom d'hôte DNS du serveur USB/IP :", - "Unused local loopback TCP port for this device:": "Port TCP local de bouclage inutilisé pour ce périphérique :", - "View USB/IP status": "Afficher l'état USB/IP", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorisez d’abord une clé publique dédiée au client sur le serveur. Le compte USB/IP restreint ne peut ni ouvrir de shell ni rediriger d’autres sockets. Vérifiez la clé d’hôte du serveur avant la connexion ; les clés inconnues sont refusées.", - "Authorize a client SSH public key": "Autoriser la clé publique SSH d’un client", - "Path to the client SSH public key on this server:": "Chemin de la clé publique SSH du client sur ce serveur :" + "⚠ The disk will be unmounted.": "⚠ Le disque sera démonté." } diff --git a/lang/it.json b/lang/it.json index af2f4c4d..d436d084 100644 --- a/lang/it.json +++ b/lang/it.json @@ -246,6 +246,7 @@ "Aborted": "Interrotto", "About to restore": "Ripristino imminente di", "Absolute directory path to use as backup target:": "Percorso assoluto della directory di destinazione del backup:", + "Absolute path of the client SSH private key:": "Percorso assoluto della chiave privata SSH del client:", "Absolute path to a file or directory you want backed up:": "Percorso assoluto del file o della directory da includere nel backup:", "Acceleration": "Accelerazione", "Acceleration configuration cancelled": "Configurazione accelerazione annullata", @@ -619,6 +620,8 @@ "Authentication:": "Autenticazione:", "Authorization failed": "Autorizzazione fallita", "Authorization successful": "Autorizzazione riuscita", + "Authorize a client SSH public key": "Autorizza la chiave pubblica SSH di un client", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorizza prima una chiave pubblica dedicata del client sul server. L’account USB/IP con accesso limitato non può avviare una shell né inoltrare altri socket. Verifica la chiave host del server prima di connetterti; le chiavi sconosciute vengono rifiutate.", "Authorize this key on the server": "Autorizzare questa chiave sul server", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autorizza tramite 'pct exec' (il server Borg è un LXC su un host PVE a cui posso accedere tramite SSH)", "Authorized": "Autorizzato", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Utilità in conflitto rimosse", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Collega i dispositivi Zigbee a MQTT tramite un’interfaccia web di configurazione.", "Connect a Coral Accelerator and try again.": "Collega un Coral Accelerator e riprova.", + "Connect a remote USB device": "Collega un dispositivo USB remoto", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Collegalo o rimuovilo dal container in Proxmox (Risorse), poi ripeti il recupero.", "Connect your devices and users together in your own secure virtual private network.": "Collega dispositivi e utenti nella tua rete privata virtuale sicura.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Collega i tuoi dispositivi in una rete overlay sicura basata su WireGuard®, con SSO, MFA e controlli granulari degli accessi.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Amministratore Directus", "Disable NIC Offloading (Intel e1000e)": "Disabilita offload NIC (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Disattiva Secure Boot nel firmware UEFI ed esegui di nuovo il programma di installazione. Non è stato modificato nulla.", + "Disable USB/IP server": "Disabilita il server USB/IP", "Disable autostart on conflicting VM": "Disabilita l'avvio automatico sulla VM in conflitto", "Disable autostart on one VM to avoid startup conflicts.": "Disabilita l'avvio automatico su una VM per evitare conflitti di avvio.", "Disable job": "Disabilita job", "Disable kernel audit messages (optional but recommended):": "Disabilita i messaggi di audit del kernel (facoltativo ma consigliato):", "Disable onboot on affected VM(s)/CT(s)": "Disabilita onboot sulle VM/CT interessati", "Disable portmapper/rpcbind": "Disabilita portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Disabilitare il server e liberare tutti i dispositivi USB gestiti da ProxMenux? Le selezioni salvate verranno mantenute per la prossima attivazione.", "Disabled": "Disabilitato", "Disabling High Availability services...": "Disabilitazione dei servizi ad alta disponibilità...", "Disabling ZFS autotrim applied by ProxMenux...": "Disattivazione di autotrim ZFS applicato da ProxMenux...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Abilita Desktop remoto (RDP) prima di disabilitare il display virtuale.", "Enable SSD emulation for this disk?": "Abilitare l'emulazione SSD per questo disco?", "Enable TCP BBR/Fast Open control": "Abilita controllo TCP BBR/Fast Open", + "Enable USB/IP server": "Abilita il server USB/IP", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Abilita la transcodifica VA-API e la conversione dei toni da HDR10/Dolby Vision a SDR", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Abilita VA-API, la codifica hardware e la mappatura dei toni OpenCL in Jellyfin", "Enable VFIO IOMMU support": "Abilita supporto VFIO IOMMU", @@ -3212,6 +3219,7 @@ "If pvesm path returned a DEVICE (LVM):": "Se pvesm path ha restituito un DISPOSITIVO (LVM):", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Se pvesm path ha restituito una DIRECTORY (ZFS/BTRFS):", "If repositories error:": "Se si verificano errori nei repository:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Se il servizio USB/IP si arresta in modo imprevisto, interrompi la condivisione mentre il dispositivo è ancora collegato per liberarlo. In rari casi solo un riavvio dell'host lo libera.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Se il container era già stato modificato, viene ripristinato il suo backup nativo precedente. Le directory condivise dell'host non vengono ripristinate. I dischi del tentativo fallito vengono rimossi se la pulizia riesce.", "If the host freezes, remove hostpci entries from": "Se l'host si blocca, rimuovi le voci hostpci da", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Se il canale immagine ha una nuova versione, CT viene arrestato, sottoposto a backup, verificato e sostituito con la nuova immagine per aggiornare il contenitore. Se qualcosa fallisce, il backup viene ripristinato.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Installa i pacchetti server nel CT:", "Install terminal multiplexers": "Installa multiplexer di terminale", "Install the Edge TPU runtime (libedgetpu1-std)": "Installa il runtime Edge TPU (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "Installare le dipendenze USB/IP dai repository Debian configurati?", "Install this image?": "Installare questa immagine?", "Install with Cloud-Init script": "Installa con lo script Cloud-Init", "Install with ISO from UUP Dump": "Installa con ISO da UUP Dump", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Riga da incollare (una sola riga, incluso il prefisso \"command=...\"):", "LinkStack": "LinkStack", "Linux Installation Options": "Opzioni installazione Linux", + "Linux guest setup and migration notes": "Configurazione degli ospiti Linux e note sulla migrazione", "Linux/Mac path:": "Percorso Linux/Mac:", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin con passthrough GPU opzionale", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB richiede un utente, un database e una password", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Nessun indirizzo IP duplicato", "No duplicate repositories found": "Nessun repository duplicato trovato", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Dopo il filtraggio SR-IOV non rimane alcun dispositivo controller/NVMe idoneo. Operazione saltata.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Nessun dispositivo USB idoneo trovato. Gli hub, i dispositivi di archiviazione di massa e gli adattatori di rete sono esclusi.", "No eligible controllers remain after SR-IOV filtering.": "Dopo il filtraggio SR-IOV non rimane alcun controller idoneo.", "No encryption key is stored on this host. Choose how to set one up:": "Nessuna chiave di crittografia archiviata su questo host. Scegli come configurarne una:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Nessun disco VM esportabile trovato (CD-ROM/cloud-init esclusi).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Nessun registro di autotest disponibile per", "No server IP or hostname provided.": "Nessun IP del server o nome host fornito.", "No share access test succeeded with guest authentication.": "Nessun test di accesso alle condivisioni è riuscito con l'autenticazione guest.", + "No shared devices are available on this server.": "Nessun dispositivo condiviso disponibile su questo server.", "No shared media content.": "Nessun contenuto multimediale condiviso.", "No shared mount detected. Applying standard local access.": "Nessun montaggio condiviso rilevato. Applicazione dell'accesso locale standard.", "No shares configured.": "Nessuna condivisione configurata.", @@ -5130,6 +5142,7 @@ "Path of the Compose file": "Percorso del file Compose", "Path of the oci-compose file": "Percorso del file oci-compose", "Path removed:": "Percorso rimosso:", + "Path to the client SSH public key on this server:": "Percorso della chiave pubblica SSH del client su questo server:", "Path:": "Percorso:", "Paths applied:": "Percorsi applicati:", "Paths included in backup": "Percorsi inclusi nel backup", @@ -5675,6 +5688,7 @@ "Remove Proxmox NFS storage:": "Rimuovi storage NFS Proxmox:", "Remove Proxmox iSCSI storage:": "Rimuovi storage iSCSI Proxmox:", "Remove Secure Gateway? State will be preserved.": "Rimuovere Secure Gateway? Lo stato sarà preservato.", + "Remove a remote USB connection": "Rimuovi una connessione USB remota", "Remove custom paths": "Rimuovi percorsi personalizzati", "Remove disk references from affected VM(s)/CT(s) config": "Rimuovi i riferimenti al disco dalle configurazioni VM/CT interessate", "Remove every registered gasket DKMS version": "Rimuovi ogni versione DKMS di gasket registrata", @@ -5695,6 +5709,7 @@ "Remove the lock left on a container by an interrupted task": "Rimuovere il blocco lasciato su un container da un’attività interrotta", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Rimuovere le credenziali salvate per {registry}?\nLe app in esecuzione continueranno a funzionare.", "Remove the unprivileged flag from configuration:": "Rimuovi il flag unprivileged dalla configurazione:", + "Remove this connection and detach its USB device?": "Rimuovere questa connessione e scollegare il relativo dispositivo USB?", "Remove unused packages and their config": "Rimuovi i pacchetti non utilizzati e la loro configurazione", "Remove: delete the application and its containers": "Rimuovi: elimina l'applicazione e i suoi container", "Removed": "RIMOSSO", @@ -5917,9 +5932,11 @@ "Run mode: Unattended": "Modalità di esecuzione: non presidiata", "Run now": "Esegui ora", "Run security audit now": "Esegui subito il controllo di sicurezza", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Esegui il client nella VM Linux che necessita del dispositivo USB. Installa usbip, openssh-client e kmod, poi copia usbip_manager.py nello stesso percorso usato sul server. Configura l'autenticazione tramite chiave e verifica la chiave host del server prima di aggiungere una connessione. Il client usa il kernel dell'ospite e può riconnettersi dopo una migrazione mentre il dispositivo USB fisico rimane sul server. Gli LXC non privilegiati e Home Assistant OS richiedono una configurazione specifica del kernel, dei dispositivi o dei componenti aggiuntivi. Un dispositivo fisico può essere collegato a un solo client alla volta.", "Run the following inside the VM:": "Esegui quanto segue nella VM:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Esegui il cambio del canale di rilascio da una sessione SSH o dalla console dell’host Proxmox con:", "Run the update from an SSH session or the Proxmox host console with:": "Esegui l’aggiornamento da una sessione SSH o dalla console dell’host Proxmox con:", + "Run this menu as root.": "Esegui questo menu come root.", "Run this operation as root.": "Esegui questa operazione come root.", "Run upgrade checklist script:": "Esegui lo script di controllo dell’aggiornamento:", "Running": "In esecuzione", @@ -6144,6 +6161,7 @@ "Select a new language for the menu:": "Seleziona una nuova lingua per il menu:", "Select a post-installation script:": "Seleziona uno script post-installazione:", "Select a pre-configured Linux VM script to execute:": "Seleziona uno script VM Linux preconfigurato da eseguire:", + "Select a saved USB/IP device:": "Seleziona un dispositivo USB/IP salvato:", "Select a script or action:": "Seleziona uno script o un'azione:", "Select a share to delete:": "Seleziona una condivisione da eliminare:", "Select a specific Coral or USB node, not the whole /dev": "Seleziona un nodo Coral o USB specifico, non l’intera directory /dev", @@ -6221,6 +6239,7 @@ "Select the Linux distribution to install:": "Seleziona la distribuzione Linux da installare:", "Select the NAS system to install:": "Seleziona il sistema NAS da installare:", "Select the NVIDIA driver version to install:": "Seleziona la versione del driver NVIDIA da installare:", + "Select the USB device to share:": "Seleziona il dispositivo USB da condividere:", "Select the VM to add the GPU to:": "Seleziona la VM a cui aggiungere la GPU:", "Select the VM to which you want to add disks:": "Seleziona la VM a cui aggiungere i dischi:", "Select the VM where you want to import the disk image:": "Seleziona la VM in cui importare l’immagine disco:", @@ -6245,6 +6264,7 @@ "Select the parent job to attach to:": "Seleziona l’attività principale a cui collegarsi:", "Select the paths to restore (one per backup entry):": "Seleziona i percorsi da ripristinare (uno per voce di backup):", "Select the privileged LXC container to convert:": "Seleziona il container LXC privilegiato da convertire:", + "Select the remote USB device:": "Seleziona il dispositivo USB remoto:", "Select the storage that will receive the backups:": "Seleziona lo storage di destinazione dei backup:", "Select the storage volume for disk import:": "Seleziona il volume storage per importare il disco:", "Select the sync interval (in hours):": "Seleziona l'intervallo di sincronizzazione (in ore):", @@ -6331,6 +6351,7 @@ "Server IDs to test against, separated by commas (optional)": "ID dei server da usare per i test, separati da virgole (facoltativi)", "Server IP/hostname is correct": "L'IP/nome host del server è corretto", "Server IP:": "IP del server:", + "Server SSH port:": "Porta SSH del server:", "Server is accessible:": "Il server è accessibile:", "Server is online": "Il server è in linea", "Server is running": "Il server è in esecuzione", @@ -6392,6 +6413,7 @@ "Share Access Error": "Errore di accesso alla condivisione", "Share Name": "Nome condivisione", "Share Options": "Opzioni di condivisione", + "Share a local USB device": "Condividi un dispositivo USB locale", "Share added successfully.": "Condivisione aggiunta con successo.", "Share deleted and Samba service restarted.": "Condivisione eliminata e servizio Samba riavviato.", "Share exists:": "La condivisione esiste:", @@ -6399,6 +6421,7 @@ "Share name:": "Nome condivisione:", "Share not found on server:": "Condivisione non trovata sul server:", "Share path:": "Percorso condivisione:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Condividi i dispositivi USB selezionati tramite SSH oppure collega questa macchina Linux a un server USB/IP.", "Share updated successfully.": "Condivisione aggiornata con successo.", "Share:": "Condivisione:", "ShareCoveX panel": "Pannello ShareCoveX", @@ -6667,6 +6690,8 @@ "Still has issues": "Ha ancora problemi", "Stop - shuts the guest down during backup": "Stop - arresta il guest durante il backup", "Stop it first and run this option again.": "Interrompilo prima ed esegui nuovamente questa opzione.", + "Stop sharing a USB device": "Interrompi la condivisione di un dispositivo USB", + "Stop sharing this device? An attached remote client will disconnect.": "Interrompere la condivisione di questo dispositivo? Il client remoto collegato verrà disconnesso.", "Stop that VM, then choose:": "Arresta quella VM, quindi scegli:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Arresta il CT, smonta il disco sull’HOST e rimontalo con:", "Stop the VM/CT before formatting this disk.": "Arresta la VM o il CT prima di formattare questo disco.", @@ -7372,6 +7397,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "La GPU Intel selezionata ha il supporto per il ripristino non FLR e un sottotipo sconosciuto", "The selected Intel GPU is currently in power state D3cold": "La GPU Intel selezionata è nello stato di alimentazione D3cold", "The selected Intel render device does not exist:": "Il dispositivo di rendering Intel selezionato non esiste:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Il dispositivo USB selezionato non sarà più disponibile per le applicazioni e gli ospiti locali. Può usarlo un solo client remoto alla volta. Condividere questo dispositivo?", "The selected VM": "La VM selezionata", "The selected VM is running.": "La VM selezionata è in esecuzione.", "The selected base folder does not exist and could not be created:": "La cartella di base selezionata non esiste e non è stato possibile crearla:", @@ -7711,6 +7737,9 @@ "USB drives mounted now:": "Unità USB montate ora:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "Nodo dispositivo USB o seriale", + "USB/IP configuration updated. Open status to check the connection.": "Configurazione USB/IP aggiornata. Apri lo stato per verificare la connessione.", + "USB/IP over SSH": "USB/IP tramite SSH", + "USB/IP server IP address or DNS hostname:": "Indirizzo IP o nome host DNS del server USB/IP:", "UUP Dump script not found.": "Script UUP Dump non trovato.", "UUp Dump ISO creator Custom": "UUp Dump - Creazione ISO personalizzate", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity è un server domestico gratuito, leggero e facile da usare per fumetti ed ebook. Consente l’accesso ai file ovunque, da tablet, e-reader, telefono o computer.", @@ -7867,6 +7896,7 @@ "Untrusted or modified NVIDIA hook": "Hook NVIDIA non attendibile o modificato", "Unused image removed from the cache:": "Immagine inutilizzata rimossa dalla cache:", "Unused images removed from the cache:": "Immagini non utilizzate rimosse dalla cache:", + "Unused local loopback TCP port for this device:": "Porta TCP locale di loopback inutilizzata per questo dispositivo:", "Update": "Aggiornamento", "Update Available": "Aggiornamento disponibile", "Update Ceph repository (Only if using Ceph):": "Aggiorna repository Ceph (solo se si utilizza Ceph):", @@ -8148,6 +8178,7 @@ "View Disk Storages": "Visualizza storage su disco", "View Mount Points": "Visualizza punti di montaggio", "View NFS Mounts (pvesm + fstab)": "Visualizza montaggi NFS (pvesm + fstab)", + "View USB/IP status": "Visualizza lo stato USB/IP", "View backup metadata": "Visualizza metadati backup", "View current paths": "Visualizza percorsi correnti", "View existing folders in /mnt": "Visualizza cartelle esistenti in /mnt", @@ -9021,36 +9052,5 @@ "⚠ Disk data will NOT be erased.": "⚠ I dati del disco NON verranno cancellati.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ Il disco verrà smontato e rimosso da /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ La voce /etc/fstab verrà rimossa.", - "⚠ The disk will be unmounted.": "⚠ Il disco verrà smontato.", - "Absolute path of the client SSH private key:": "Percorso assoluto della chiave privata SSH del client:", - "Connect a remote USB device": "Collega un dispositivo USB remoto", - "Disable USB/IP server": "Disabilita il server USB/IP", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Disabilitare il server e liberare tutti i dispositivi USB gestiti da ProxMenux? Le selezioni salvate verranno mantenute per la prossima attivazione.", - "Enable USB/IP server": "Abilita il server USB/IP", - "Install the USB/IP dependencies from the configured Debian repositories?": "Installare le dipendenze USB/IP dai repository Debian configurati?", - "Linux guest setup and migration notes": "Configurazione degli ospiti Linux e note sulla migrazione", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Nessun dispositivo USB idoneo trovato. Gli hub, i dispositivi di archiviazione di massa e gli adattatori di rete sono esclusi.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Se il servizio USB/IP si arresta in modo imprevisto, interrompi la condivisione mentre il dispositivo è ancora collegato per liberarlo. In rari casi solo un riavvio dell'host lo libera.", - "No shared devices are available on this server.": "Nessun dispositivo condiviso disponibile su questo server.", - "Remove a remote USB connection": "Rimuovi una connessione USB remota", - "Remove this connection and detach its USB device?": "Rimuovere questa connessione e scollegare il relativo dispositivo USB?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Esegui il client nella VM Linux che necessita del dispositivo USB. Installa usbip, openssh-client e kmod, poi copia usbip_manager.py nello stesso percorso usato sul server. Configura l'autenticazione tramite chiave e verifica la chiave host del server prima di aggiungere una connessione. Il client usa il kernel dell'ospite e può riconnettersi dopo una migrazione mentre il dispositivo USB fisico rimane sul server. Gli LXC non privilegiati e Home Assistant OS richiedono una configurazione specifica del kernel, dei dispositivi o dei componenti aggiuntivi. Un dispositivo fisico può essere collegato a un solo client alla volta.", - "Run this menu as root.": "Esegui questo menu come root.", - "Select a saved USB/IP device:": "Seleziona un dispositivo USB/IP salvato:", - "Select the USB device to share:": "Seleziona il dispositivo USB da condividere:", - "Select the remote USB device:": "Seleziona il dispositivo USB remoto:", - "Server SSH port:": "Porta SSH del server:", - "Share a local USB device": "Condividi un dispositivo USB locale", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Condividi i dispositivi USB selezionati tramite SSH oppure collega questa macchina Linux a un server USB/IP.", - "Stop sharing a USB device": "Interrompi la condivisione di un dispositivo USB", - "Stop sharing this device? An attached remote client will disconnect.": "Interrompere la condivisione di questo dispositivo? Il client remoto collegato verrà disconnesso.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Il dispositivo USB selezionato non sarà più disponibile per le applicazioni e gli ospiti locali. Può usarlo un solo client remoto alla volta. Condividere questo dispositivo?", - "USB/IP configuration updated. Open status to check the connection.": "Configurazione USB/IP aggiornata. Apri lo stato per verificare la connessione.", - "USB/IP over SSH": "USB/IP tramite SSH", - "USB/IP server IP address or DNS hostname:": "Indirizzo IP o nome host DNS del server USB/IP:", - "Unused local loopback TCP port for this device:": "Porta TCP locale di loopback inutilizzata per questo dispositivo:", - "View USB/IP status": "Visualizza lo stato USB/IP", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorizza prima una chiave pubblica dedicata del client sul server. L’account USB/IP con accesso limitato non può avviare una shell né inoltrare altri socket. Verifica la chiave host del server prima di connetterti; le chiavi sconosciute vengono rifiutate.", - "Authorize a client SSH public key": "Autorizza la chiave pubblica SSH di un client", - "Path to the client SSH public key on this server:": "Percorso della chiave pubblica SSH del client su questo server:" + "⚠ The disk will be unmounted.": "⚠ Il disco verrà smontato." } diff --git a/lang/pt.json b/lang/pt.json index 10fa90cd..2031b6d6 100644 --- a/lang/pt.json +++ b/lang/pt.json @@ -246,6 +246,7 @@ "Aborted": "Abortado", "About to restore": "Prestes a restaurar", "Absolute directory path to use as backup target:": "caminho absoluto do diretório para usar como destino de backup:", + "Absolute path of the client SSH private key:": "Caminho absoluto da chave privada SSH do cliente:", "Absolute path to a file or directory you want backed up:": "Caminho absoluto para um arquivo ou diretório do qual deseja fazer backup:", "Acceleration": "Aceleração", "Acceleration configuration cancelled": "Configuração da aceleração cancelada", @@ -619,6 +620,8 @@ "Authentication:": "Autenticação:", "Authorization failed": "Falha na autorização", "Authorization successful": "Autorização bem-sucedida", + "Authorize a client SSH public key": "Autorizar a chave pública SSH de um cliente", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorize primeiro uma chave pública dedicada do cliente no servidor. A conta USB/IP restrita não pode abrir uma shell nem encaminhar outros sockets. Verifique a chave do servidor antes de ligar; as chaves desconhecidas são rejeitadas.", "Authorize this key on the server": "Autorize esta chave no servidor", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autorizar via 'pct exec' (o servidor Borg é um LXC em um host PVE no qual posso usar SSH)", "Authorized": "Autorizado", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Utilitários conflitantes removidos", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Conecte dispositivos Zigbee ao MQTT por meio de uma interface web de configuração.", "Connect a Coral Accelerator and try again.": "Conecte um Coral Accelerator e tente novamente.", + "Connect a remote USB device": "Ligar um dispositivo USB remoto", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Conecte-o ou remova-o do contêiner em Proxmox (Recursos) e execute a recuperação novamente.", "Connect your devices and users together in your own secure virtual private network.": "Conecte seus dispositivos e usuários em sua própria rede privada virtual segura.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Conecte seus dispositivos a uma rede segura de sobreposição WireGuard® com controles de acesso SSO, MFA e granular.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Administrador do Directus", "Disable NIC Offloading (Intel e1000e)": "Desativar descarregamento de NIC (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Desative o Secure Boot no firmware UEFI e execute o instalador novamente. Nada foi alterado.", + "Disable USB/IP server": "Desativar o servidor USB/IP", "Disable autostart on conflicting VM": "Desative a inicialização automática em VM conflitante", "Disable autostart on one VM to avoid startup conflicts.": "Desative a inicialização automática em uma VM para evitar conflitos de inicialização.", "Disable job": "Desativar trabalho", "Disable kernel audit messages (optional but recommended):": "Desative as mensagens de auditoria do kernel (opcional, mas recomendado):", "Disable onboot on affected VM(s)/CT(s)": "Desativar inicialização em VM(s)/CT(s) afetados", "Disable portmapper/rpcbind": "Desativar portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Desativar o servidor e libertar todos os dispositivos USB geridos pelo ProxMenux? As seleções guardadas serão mantidas para a próxima ativação.", "Disabled": "Desabilitado", "Disabling High Availability services...": "Desativando serviços de alta disponibilidade...", "Disabling ZFS autotrim applied by ProxMenux...": "Desativando o ajuste automático do ZFS aplicado pelo ProxMenux...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Habilite a Área de Trabalho Remota (RDP) antes de desabilitar a exibição virtual.", "Enable SSD emulation for this disk?": "Ativar emulação SSD para este disco?", "Enable TCP BBR/Fast Open control": "Habilitar controle TCP BBR/Fast Open", + "Enable USB/IP server": "Ativar o servidor USB/IP", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Habilitar transcodificação VA-API e HDR10/Dolby Vision para mapeamento de tom SDR", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Habilitar VA-API, codificação de hardware e mapeamento de tom OpenCL em Jellyfin", "Enable VFIO IOMMU support": "Habilitar suporte VFIO IOMMU", @@ -3212,6 +3219,7 @@ "If pvesm path returned a DEVICE (LVM):": "Se pvesm path devolveu um DISPOSITIVO (LVM):", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Se pvesm path devolveu um DIRETÓRIO (ZFS/BTRFS):", "If repositories error:": "Se houver erro nos repositórios:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Se o serviço USB/IP parar inesperadamente, deixe de partilhar o dispositivo enquanto ainda estiver ligado para o libertar. Em casos raros, só um reinício do host o liberta.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Se o contêiner já tiver sido alterado, seu backup nativo anterior será restaurado. Os diretórios de host compartilhados não são revertidos. Os discos da tentativa fracassada serão removidos quando a limpeza for bem-sucedida.", "If the host freezes, remove hostpci entries from": "Se o host congelar, remova as entradas hostpci de", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Se o canal de imagem tiver uma nova versão, o CT é interrompido, feito backup e verificado e substituído pela nova imagem para atualizar o contêiner. Se algo falhar, o backup será restaurado.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Instale pacotes de servidores dentro do CT:", "Install terminal multiplexers": "Instale multiplexadores de terminal", "Install the Edge TPU runtime (libedgetpu1-std)": "Instale o tempo de execução do Edge TPU (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "Instalar as dependências USB/IP a partir dos repositórios Debian configurados?", "Install this image?": "Instalar esta imagem?", "Install with Cloud-Init script": "Instalar com script Cloud-Init", "Install with ISO from UUP Dump": "Instalar com ISO do UUP Dump", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Linha a ser colada (linha única, incluindo o prefixo \"command=...\"):", "LinkStack": "LinkStack", "Linux Installation Options": "Opções de instalação do Linux", + "Linux guest setup and migration notes": "Configuração de convidados Linux e notas de migração", "Linux/Mac path:": "Caminho Linux/Mac:", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin com passagem opcional de GPU", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB requires um usuário, banco de dados e senha", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Nenhum endereço IP duplicado", "No duplicate repositories found": "Nenhum repositório duplicado encontrado", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Nenhum dispositivo Controlador/NVMe qualificado permanece após a filtragem SR-IOV. Pulando.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Não foram encontrados dispositivos USB elegíveis. Os hubs, os dispositivos de armazenamento em massa e os adaptadores de rede estão excluídos.", "No eligible controllers remain after SR-IOV filtering.": "Nenhum controlador elegível permanece após a filtragem SR-IOV.", "No encryption key is stored on this host. Choose how to set one up:": "Nenhuma chave de criptografia é armazenada neste host. Escolha como configurar um:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Nenhum disco VM exportável foi encontrado (CD-ROM/cloud-init foram excluídos).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Nenhum registro de autoteste disponível para", "No server IP or hostname provided.": "Nenhum IP do servidor ou nome de host fornecido.", "No share access test succeeded with guest authentication.": "Nenhum teste de acesso de compartilhamento foi bem-sucedido com a autenticação de convidado.", + "No shared devices are available on this server.": "Não há dispositivos partilhados disponíveis neste servidor.", "No shared media content.": "Sem conteúdo de mídia compartilhado.", "No shared mount detected. Applying standard local access.": "Nenhuma montagem compartilhada detectada. Aplicando acesso local padrão.", "No shares configured.": "Nenhum compartilhamento configurado.", @@ -5130,6 +5142,7 @@ "Path of the Compose file": "Localização do ficheiro Compor", "Path of the oci-compose file": "Caminho do arquivo oci-compose", "Path removed:": "Caminho removido:", + "Path to the client SSH public key on this server:": "Caminho da chave pública SSH do cliente neste servidor:", "Path:": "Caminho:", "Paths applied:": "Caminhos aplicados:", "Paths included in backup": "Caminhos incluídos no backup", @@ -5675,6 +5688,7 @@ "Remove Proxmox NFS storage:": "Remova o armazenamento Proxmox NFS:", "Remove Proxmox iSCSI storage:": "Remova o armazenamento iSCSI Proxmox:", "Remove Secure Gateway? State will be preserved.": "Remover Secure Gateway? O estado será preservado.", + "Remove a remote USB connection": "Remover uma ligação USB remota", "Remove custom paths": "Remover caminhos personalizados", "Remove disk references from affected VM(s)/CT(s) config": "Remover referências de disco da configuração de VM(s)/CT(s) afetadas", "Remove every registered gasket DKMS version": "Remover todas as versões DKMS de gasket registadas", @@ -5695,6 +5709,7 @@ "Remove the lock left on a container by an interrupted task": "Remover o bloqueio deixado num contentor por uma tarefa interrompida", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Remover as credenciais salvas para {registry}?\nOs aplicativos em execução continuarão funcionando.", "Remove the unprivileged flag from configuration:": "Remova o sinalizador sem privilégios da configuração:", + "Remove this connection and detach its USB device?": "Remover esta ligação e desligar o respetivo dispositivo USB?", "Remove unused packages and their config": "Remova pacotes não utilizados e suas configurações", "Remove: delete the application and its containers": "Remover: apagar o aplicativo e seus recipientes", "Removed": "Removido", @@ -5917,9 +5932,11 @@ "Run mode: Unattended": "Modo de execução: Autônomo", "Run now": "Executar agora", "Run security audit now": "Execute a auditoria de segurança agora", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Execute o cliente na VM Linux que precisa do dispositivo USB. Instale usbip, openssh-client e kmod e copie usbip_manager.py para o mesmo caminho usado no servidor. Configure a autenticação por chave e verifique a chave de anfitrião do servidor antes de adicionar uma ligação. O cliente usa o kernel do convidado e pode voltar a ligar-se após uma migração enquanto o dispositivo USB físico permanece no servidor. Os LXC sem privilégios e o Home Assistant OS precisam de uma configuração própria do kernel, dos dispositivos ou dos complementos. Um dispositivo físico só pode estar ligado a um cliente de cada vez.", "Run the following inside the VM:": "Execute o seguinte dentro da VM:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "execute a opção de canal de lançamento a partir de uma sessão SSH ou do console do host Proxmox com:", "Run the update from an SSH session or the Proxmox host console with:": "execute a atualização a partir de uma sessão SSH ou do console do host Proxmox com:", + "Run this menu as root.": "Execute este menu como root.", "Run this operation as root.": "Execute esta operação como root.", "Run upgrade checklist script:": "Execute o script da lista de verificação de atualização:", "Running": "Correndo", @@ -6144,6 +6161,7 @@ "Select a new language for the menu:": "Selecione um novo idioma para o menu:", "Select a post-installation script:": "Selecione um script pós-instalação:", "Select a pre-configured Linux VM script to execute:": "Selecione um script de VM Linux pré-configurado para executar:", + "Select a saved USB/IP device:": "Selecione um dispositivo USB/IP guardado:", "Select a script or action:": "Selecione um script ou ação:", "Select a share to delete:": "Selecione um compartilhamento para excluir:", "Select a specific Coral or USB node, not the whole /dev": "Selecione um nó Coral ou USB específico, não o /dev inteiro", @@ -6221,6 +6239,7 @@ "Select the Linux distribution to install:": "Selecione a distribuição Linux para instalar:", "Select the NAS system to install:": "Selecione o sistema NAS para instalar:", "Select the NVIDIA driver version to install:": "Selecione a versão do driver NVIDIA para instalar:", + "Select the USB device to share:": "Selecione o dispositivo USB a partilhar:", "Select the VM to add the GPU to:": "Selecione a VM à qual adicionar a GPU:", "Select the VM to which you want to add disks:": "Selecione a VM à qual você deseja adicionar discos:", "Select the VM where you want to import the disk image:": "Selecione a VM para a qual deseja importar a imagem de disco:", @@ -6245,6 +6264,7 @@ "Select the parent job to attach to:": "Selecione o trabalho pai ao qual deseja anexar:", "Select the paths to restore (one per backup entry):": "Selecione os caminhos para restaurar (um por entrada de backup):", "Select the privileged LXC container to convert:": "Selecione o contêiner LXC privilegiado para converter:", + "Select the remote USB device:": "Selecione o dispositivo USB remoto:", "Select the storage that will receive the backups:": "Selecione o armazenamento que receberá os backups:", "Select the storage volume for disk import:": "Selecione o volume de armazenamento para importação de disco:", "Select the sync interval (in hours):": "Selecione o intervalo de sincronização (em horas):", @@ -6331,6 +6351,7 @@ "Server IDs to test against, separated by commas (optional)": "IDs de servidor para testar, separados por vírgulas (opcional)", "Server IP/hostname is correct": "O IP/nome do host do servidor está correto", "Server IP:": "IP do servidor:", + "Server SSH port:": "Porta SSH do servidor:", "Server is accessible:": "O servidor está acessível:", "Server is online": "O servidor está on-line", "Server is running": "O servidor está em execução", @@ -6392,6 +6413,7 @@ "Share Access Error": "Erro de acesso ao compartilhamento", "Share Name": "Compartilhar nome", "Share Options": "Opções de compartilhamento", + "Share a local USB device": "Partilhar um dispositivo USB local", "Share added successfully.": "Compartilhamento adicionado com sucesso.", "Share deleted and Samba service restarted.": "Compartilhamento excluído e serviço Samba reiniciado.", "Share exists:": "Existe compartilhamento:", @@ -6399,6 +6421,7 @@ "Share name:": "Nome do compartilhamento:", "Share not found on server:": "Compartilhamento não encontrado no servidor:", "Share path:": "Compartilhar caminho:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Partilhe os dispositivos USB selecionados através de SSH ou ligue esta máquina Linux a um servidor USB/IP.", "Share updated successfully.": "Compartilhamento atualizado com sucesso.", "Share:": "Compartilhar:", "ShareCoveX panel": "Painel ShareCoveX", @@ -6667,6 +6690,8 @@ "Still has issues": "Ainda tem problemas", "Stop - shuts the guest down during backup": "Parar - desliga o convidado durante o backup", "Stop it first and run this option again.": "Pare primeiro e execute esta opção novamente.", + "Stop sharing a USB device": "Parar a partilha de um dispositivo USB", + "Stop sharing this device? An attached remote client will disconnect.": "Parar a partilha deste dispositivo? O cliente remoto ligado será desligado.", "Stop that VM, then choose:": "Pare esse VM e escolha:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Pare o CT, desmonte o disco no HOST e remonte com:", "Stop the VM/CT before formatting this disk.": "Pare a VM/CT antes de formatar este disco.", @@ -7372,6 +7397,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "A GPU Intel selecionada tem suporte para redefinição não FLR e subtipo desconhecido", "The selected Intel GPU is currently in power state D3cold": "A GPU Intel selecionada está atualmente no estado de energia D3cold", "The selected Intel render device does not exist:": "O dispositivo de renderização Intel selecionado não existe:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "O dispositivo USB selecionado ficará indisponível para aplicações e convidados locais. Só um cliente remoto o pode usar de cada vez. Partilhar este dispositivo?", "The selected VM": "A VM selecionada", "The selected VM is running.": "A VM selecionada está em execução.", "The selected base folder does not exist and could not be created:": "A pasta base selecionada não existe e não pôde ser criada:", @@ -7711,6 +7737,9 @@ "USB drives mounted now:": "unidades USB montadas agora:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "nó de dispositivo USB ou serial", + "USB/IP configuration updated. Open status to check the connection.": "Configuração USB/IP atualizada. Abra o estado para verificar a ligação.", + "USB/IP over SSH": "USB/IP através de SSH", + "USB/IP server IP address or DNS hostname:": "Endereço IP ou nome de anfitrião DNS do servidor USB/IP:", "UUP Dump script not found.": "Script de despejo UUP não encontrado.", "UUp Dump ISO creator Custom": "Criador UUp Dump ISO personalizado", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity é um servidor doméstico gratuito, leve e fácil de usar para seus quadrinhos e ebooks. Use-o para acessar seus arquivos de qualquer lugar, com um tablet, um e-leitor, um telefone ou um computador.", @@ -7867,6 +7896,7 @@ "Untrusted or modified NVIDIA hook": "Gancho NVIDIA não confiável ou modificado", "Unused image removed from the cache:": "Imagem não usada removida da cache:", "Unused images removed from the cache:": "Imagens não usadas removidas da cache:", + "Unused local loopback TCP port for this device:": "Porta TCP local de loopback livre para este dispositivo:", "Update": "Atualizar", "Update Available": "atualização disponível", "Update Ceph repository (Only if using Ceph):": "Atualize o repositório do Ceph (somente se estiver usando o Ceph):", @@ -8148,6 +8178,7 @@ "View Disk Storages": "Ver armazenamentos em disco", "View Mount Points": "Ver pontos de montagem", "View NFS Mounts (pvesm + fstab)": "Ver montagens NFS (pvesm + fstab)", + "View USB/IP status": "Ver estado USB/IP", "View backup metadata": "Ver metadados de backup", "View current paths": "Ver caminhos atuais", "View existing folders in /mnt": "Veja as pastas existentes em /mnt", @@ -9021,36 +9052,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Os dados do disco NÃO serão apagados.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ O disco será desmontado e removido de /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ A entrada /etc/fstab será removida.", - "⚠ The disk will be unmounted.": "⚠ O disco será desmontado.", - "Absolute path of the client SSH private key:": "Caminho absoluto da chave privada SSH do cliente:", - "Connect a remote USB device": "Ligar um dispositivo USB remoto", - "Disable USB/IP server": "Desativar o servidor USB/IP", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Desativar o servidor e libertar todos os dispositivos USB geridos pelo ProxMenux? As seleções guardadas serão mantidas para a próxima ativação.", - "Enable USB/IP server": "Ativar o servidor USB/IP", - "Install the USB/IP dependencies from the configured Debian repositories?": "Instalar as dependências USB/IP a partir dos repositórios Debian configurados?", - "Linux guest setup and migration notes": "Configuração de convidados Linux e notas de migração", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Não foram encontrados dispositivos USB elegíveis. Os hubs, os dispositivos de armazenamento em massa e os adaptadores de rede estão excluídos.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Se o serviço USB/IP parar inesperadamente, deixe de partilhar o dispositivo enquanto ainda estiver ligado para o libertar. Em casos raros, só um reinício do host o liberta.", - "No shared devices are available on this server.": "Não há dispositivos partilhados disponíveis neste servidor.", - "Remove a remote USB connection": "Remover uma ligação USB remota", - "Remove this connection and detach its USB device?": "Remover esta ligação e desligar o respetivo dispositivo USB?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Execute o cliente na VM Linux que precisa do dispositivo USB. Instale usbip, openssh-client e kmod e copie usbip_manager.py para o mesmo caminho usado no servidor. Configure a autenticação por chave e verifique a chave de anfitrião do servidor antes de adicionar uma ligação. O cliente usa o kernel do convidado e pode voltar a ligar-se após uma migração enquanto o dispositivo USB físico permanece no servidor. Os LXC sem privilégios e o Home Assistant OS precisam de uma configuração própria do kernel, dos dispositivos ou dos complementos. Um dispositivo físico só pode estar ligado a um cliente de cada vez.", - "Run this menu as root.": "Execute este menu como root.", - "Select a saved USB/IP device:": "Selecione um dispositivo USB/IP guardado:", - "Select the USB device to share:": "Selecione o dispositivo USB a partilhar:", - "Select the remote USB device:": "Selecione o dispositivo USB remoto:", - "Server SSH port:": "Porta SSH do servidor:", - "Share a local USB device": "Partilhar um dispositivo USB local", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Partilhe os dispositivos USB selecionados através de SSH ou ligue esta máquina Linux a um servidor USB/IP.", - "Stop sharing a USB device": "Parar a partilha de um dispositivo USB", - "Stop sharing this device? An attached remote client will disconnect.": "Parar a partilha deste dispositivo? O cliente remoto ligado será desligado.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "O dispositivo USB selecionado ficará indisponível para aplicações e convidados locais. Só um cliente remoto o pode usar de cada vez. Partilhar este dispositivo?", - "USB/IP configuration updated. Open status to check the connection.": "Configuração USB/IP atualizada. Abra o estado para verificar a ligação.", - "USB/IP over SSH": "USB/IP através de SSH", - "USB/IP server IP address or DNS hostname:": "Endereço IP ou nome de anfitrião DNS do servidor USB/IP:", - "Unused local loopback TCP port for this device:": "Porta TCP local de loopback livre para este dispositivo:", - "View USB/IP status": "Ver estado USB/IP", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Autorize primeiro uma chave pública dedicada do cliente no servidor. A conta USB/IP restrita não pode abrir uma shell nem encaminhar outros sockets. Verifique a chave do servidor antes de ligar; as chaves desconhecidas são rejeitadas.", - "Authorize a client SSH public key": "Autorizar a chave pública SSH de um cliente", - "Path to the client SSH public key on this server:": "Caminho da chave pública SSH do cliente neste servidor:" + "⚠ The disk will be unmounted.": "⚠ O disco será desmontado." } diff --git a/lang/sk.json b/lang/sk.json index 64d93b74..cba030bb 100644 --- a/lang/sk.json +++ b/lang/sk.json @@ -246,6 +246,7 @@ "Aborted": "Zrušené", "About to restore": "Chystá sa obnova", "Absolute directory path to use as backup target:": "Absolútna cesta k priečinku, ktorý sa má použiť ako cieľ záloh:", + "Absolute path of the client SSH private key:": "Absolútna cesta k súkromnému SSH kľúču klienta:", "Absolute path to a file or directory you want backed up:": "Absolútna cesta k súboru alebo priečinku, ktorý chcete zálohovať:", "Acceleration": "Zrýchlenie", "Acceleration configuration cancelled": "Konfigurácia zrýchlenia zrušená", @@ -619,6 +620,8 @@ "Authentication:": "Prihlásenie:", "Authorization failed": "Autorizácia zlyhala", "Authorization successful": "Autorizácia úspešná", + "Authorize a client SSH public key": "Povoliť verejný SSH kľúč klienta", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Najprv na serveri povoľte samostatný verejný kľúč klienta. Obmedzený účet USB/IP nemôže spustiť shell ani presmerovať iné sockety. Pred pripojením overte hostiteľský kľúč servera; neznáme kľúče sa odmietnu.", "Authorize this key on the server": "Autorizovať tento kľúč na serveri", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Autorizovať cez 'pct exec' (Borg server je LXC na PVE hostovi, kam sa viem pripojiť cez SSH)", "Authorized": "Autorizované", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Konfliktné nástroje odstránené", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Pripojte zariadenia Zigbee k MQTT prostredníctvom webového rozhrania na nastavenie.", "Connect a Coral Accelerator and try again.": "Pripojte Coral Accelerator a skúste to znova.", + "Connect a remote USB device": "Pripojiť vzdialené USB zariadenie", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Pripojte zariadenie alebo ho odstráňte z konfigurácie kontajnera v Proxmoxe (Zdroje) a registráciu zopakujte.", "Connect your devices and users together in your own secure virtual private network.": "Spojte svoje zariadenia a užívateľov vo vlastnej zabezpečenej virtuálnej súkromnej sieti.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Pripojte svoje zariadenia do zabezpečenej prekryvnej siete založenej na WireGuard® s ovládacími prvkami SSO, MFA a granulovaného prístupu.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Správca Directus", "Disable NIC Offloading (Intel e1000e)": "Vypnúť NIC offloading (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Vypnite Secure Boot vo firmvéri UEFI a spustite inštalátor znova. Nič sa nezmenilo.", + "Disable USB/IP server": "Zakázať server USB/IP", "Disable autostart on conflicting VM": "Vypnúť automatický štart na konfliktnej VM", "Disable autostart on one VM to avoid startup conflicts.": "Na jednej VM vypnite automatický štart, aby nevznikol konflikt pri spúšťaní.", "Disable job": "Zakázať úlohu", "Disable kernel audit messages (optional but recommended):": "Vypnite audit správy kernelu (voliteľné, ale odporúčané):", "Disable onboot on affected VM(s)/CT(s)": "Vypnúť onboot na dotknutých VM/CT", "Disable portmapper/rpcbind": "Vypnúť portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Zakázať server a uvoľniť všetky USB zariadenia spravované ProxMenuxom? Uložený výber sa zachová pre ďalšie povolenie.", "Disabled": "Vypnuté", "Disabling High Availability services...": "Vypínam služby High Availability...", "Disabling ZFS autotrim applied by ProxMenux...": "Vypínam ZFS autotrim, ktorý nastavil ProxMenux...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Pred vypnutím virtuálneho zobrazenia zapnite Vzdialenú plochu (RDP).", "Enable SSD emulation for this disk?": "Zapnúť pre tento disk emuláciu SSD?", "Enable TCP BBR/Fast Open control": "Zapnúť TCP BBR/Fast Open", + "Enable USB/IP server": "Povoliť server USB/IP", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Povoliť prevod videa cez VA-API a mapovanie tónov HDR10/Dolby Vision na SDR", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Povoliť VA-API, hardvérové kódovanie a mapovanie tónov pomocou OpenCL v Jellyfine", "Enable VFIO IOMMU support": "Zapnúť podporu VFIO/IOMMU", @@ -3211,6 +3218,7 @@ "If pvesm path returned a DEVICE (LVM):": "Ak pvesm path vrátil ZARIADENIE (LVM):", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Ak pvesm path vrátil PRIEČINOK (ZFS/BTRFS):", "If repositories error:": "Ak zlyhajú repozitáre:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Ak sa služba USB/IP neočakávane zastaví, ukončite zdieľanie, kým je zariadenie ešte pripojené, aby sa uvoľnilo. V zriedkavých prípadoch ho uvoľní iba reštart hosta.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Ak už bol kontajner zmenený, obnoví sa jeho predchádzajúca natívna záloha. Zdieľané hostiteľské adresáre sa nevrátia späť. Disky neúspešného pokusu sa po úspešnom vyčistení odstránia.", "If the host freezes, remove hostpci entries from": "Ak server zamrzne, odstráňte položky hostpci z", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Ak má kanál obrázkov novú verziu, CT sa zastaví, zálohuje a overí a nahradí sa novým obrázkom, aby sa aktualizoval kontajner. Ak niečo zlyhá, záloha sa obnoví.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Nainštalovať serverové balíky vo vnútri CT:", "Install terminal multiplexers": "Nainštalovať terminálové multiplexery", "Install the Edge TPU runtime (libedgetpu1-std)": "Nainštaluje Edge TPU runtime (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "Nainštalovať závislosti USB/IP z nakonfigurovaných repozitárov Debianu?", "Install this image?": "Nainštalovať tento obraz?", "Install with Cloud-Init script": "Inštalovať cez Cloud-Init skript", "Install with ISO from UUP Dump": "Inštalovať z ISO cez UUP Dump", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Riadok na vloženie (jeden riadok vrátane predpony \"command=...\"):", "LinkStack": "LinkStack", "Linux Installation Options": "Možnosti inštalácie Linuxu", + "Linux guest setup and migration notes": "Nastavenie hostí Linux a poznámky k migrácii", "Linux/Mac path:": "Cesta pre Linux/Mac:", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin s voliteľným GPU priechodom", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB vyžaduje používateľa, databázu a heslo", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Nenašli sa duplicitné IP adresy", "No duplicate repositories found": "Nenašli sa žiadne duplicitné repozitáre", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Po odfiltrovaní SR-IOV nezostali žiadne vhodné Controller/NVMe zariadenia. Preskakuje sa.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Nenašli sa žiadne vhodné USB zariadenia. Rozbočovače, veľkokapacitné úložiská a sieťové adaptéry sú vylúčené.", "No eligible controllers remain after SR-IOV filtering.": "Po odfiltrovaní SR-IOV nezostali žiadne vhodné controllery.", "No encryption key is stored on this host. Choose how to set one up:": "Na tomto hostovi nie je uložený žiadny šifrovací kľúč. Vyberte, ako ho nastaviť:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Nenašli sa žiadne exportovateľné VM disky (CD-ROM/cloud-init sú vylúčené).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Nie je dostupný log samo-testu pre", "No server IP or hostname provided.": "Nebola zadaná IP adresa ani názov servera.", "No share access test succeeded with guest authentication.": "S overením hosťa nebol úspešný žiadny test prístupu k zdieľaniu.", + "No shared devices are available on this server.": "Na tomto serveri nie sú k dispozícii žiadne zdieľané zariadenia.", "No shared media content.": "Žiadny spoločný mediálny obsah.", "No shared mount detected. Applying standard local access.": "Nenašlo sa zdieľané pripojenie. Nastavujem bežný lokálny prístup.", "No shares configured.": "Nie sú nastavené žiadne zdieľania.", @@ -5132,6 +5144,7 @@ "Path of the Compose file": "Cesta k súboru Compose", "Path of the oci-compose file": "Cesta k súboru oci-compose", "Path removed:": "Cesta bola odstránená:", + "Path to the client SSH public key on this server:": "Cesta k verejnému SSH kľúču klienta na tomto serveri:", "Path:": "Cesta:", "Paths applied:": "Použité cesty:", "Paths included in backup": "Cesty zahrnuté v zálohe", @@ -5677,6 +5690,7 @@ "Remove Proxmox NFS storage:": "Odstrániť NFS úložisko z Proxmoxu:", "Remove Proxmox iSCSI storage:": "Odstrániť iSCSI úložisko z Proxmoxu:", "Remove Secure Gateway? State will be preserved.": "Odstrániť Secure Gateway? Stav bude zachovaný.", + "Remove a remote USB connection": "Odstrániť vzdialené USB pripojenie", "Remove custom paths": "Odstrániť vlastné cesty", "Remove disk references from affected VM(s)/CT(s) config": "Odstrániť referencie na disk z nastavení dotknutých VM/CT", "Remove every registered gasket DKMS version": "Odstrániť všetky registrované verzie gasket DKMS", @@ -5697,6 +5711,7 @@ "Remove the lock left on a container by an interrupted task": "Odstrániť zámok, ktorý na kontajneri zanechala prerušená úloha", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Odstrániť uložené prihlasovacie údaje pre {registry}?\nSpustené aplikácie budú naďalej fungovať.", "Remove the unprivileged flag from configuration:": "Odstrániť príznak neprivilegovaného kontajnera z nastavenia:", + "Remove this connection and detach its USB device?": "Odstrániť toto pripojenie a odpojiť jeho USB zariadenie?", "Remove unused packages and their config": "Odstrániť nepoužívané balíky aj ich nastavenia", "Remove: delete the application and its containers": "Odstrániť: zmazať aplikáciu a jej kontajnery", "Removed": "Odstránené", @@ -5919,9 +5934,11 @@ "Run mode: Unattended": "Režim spustenia: bez zásahu", "Run now": "Bež teraz", "Run security audit now": "Spustiť bezpečnostný audit teraz", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Klienta spustite vo virtuálnom stroji Linux, ktorý potrebuje USB zariadenie. Nainštalujte usbip, openssh-client a kmod a potom skopírujte usbip_manager.py na rovnakú cestu ako na serveri. Pred pridaním pripojenia nastavte overovanie kľúčom a overte hostiteľský kľúč servera. Klient používa jadro hosťa a po migrácii sa môže znova pripojiť, zatiaľ čo fyzické USB zariadenie zostáva na serveri. Neprivilegované LXC a Home Assistant OS vyžadujú vlastné nastavenie jadra, zariadení alebo doplnkov. Fyzické zariadenie môže byť pripojené iba k jednému klientovi naraz.", "Run the following inside the VM:": "Vo vnútri VM spustite:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Prepnutie vetvy vydania spustite cez SSH alebo priamo z konzoly Proxmox servera pomocou:", "Run the update from an SSH session or the Proxmox host console with:": "Spustite aktualizáciu zo SSH relácie alebo z konzoly Proxmox hosta pomocou:", + "Run this menu as root.": "Túto ponuku spustite ako root.", "Run this operation as root.": "Túto operáciu spustite ako root.", "Run upgrade checklist script:": "Spustite kontrolný skript aktualizácie:", "Running": "Beží", @@ -6146,6 +6163,7 @@ "Select a new language for the menu:": "Vyberte nový jazyk menu:", "Select a post-installation script:": "Vyberte skript po inštalácii:", "Select a pre-configured Linux VM script to execute:": "Vyberte pripravený skript pre Linux VM, ktorý sa má spustiť:", + "Select a saved USB/IP device:": "Vyberte uložené zariadenie USB/IP:", "Select a script or action:": "Vyberte skript alebo akciu:", "Select a share to delete:": "Vyberte zdieľanie na vymazanie:", "Select a specific Coral or USB node, not the whole /dev": "Vyberte špecifický Coral alebo USB uzol, nie celý /dev", @@ -6223,6 +6241,7 @@ "Select the Linux distribution to install:": "Vyberte Linux distribúciu na inštaláciu:", "Select the NAS system to install:": "Vyberte NAS systém na inštaláciu:", "Select the NVIDIA driver version to install:": "Vyberte verziu ovládača NVIDIA na inštaláciu:", + "Select the USB device to share:": "Vyberte USB zariadenie na zdieľanie:", "Select the VM to add the GPU to:": "Vyberte VM, do ktorej sa má GPU pridať:", "Select the VM to which you want to add disks:": "Vyberte VM, do ktorej chcete pridať disky:", "Select the VM where you want to import the disk image:": "Vyberte VM, do ktorej chcete importovať diskový obraz:", @@ -6247,6 +6266,7 @@ "Select the parent job to attach to:": "Vyberte nadradenú úlohu, ku ktorej sa má pripojiť:", "Select the paths to restore (one per backup entry):": "Vyberte cesty na obnovu (jedna za každú položku zálohy):", "Select the privileged LXC container to convert:": "Vyberte privilegovaný LXC kontajner na prevod:", + "Select the remote USB device:": "Vyberte vzdialené USB zariadenie:", "Select the storage that will receive the backups:": "Vyberte úložisko, ktoré bude prijímať zálohy:", "Select the storage volume for disk import:": "Vyberte úložisko pre import disku:", "Select the sync interval (in hours):": "Vyberte interval synchronizácie (v hodinách):", @@ -6333,6 +6353,7 @@ "Server IDs to test against, separated by commas (optional)": "ID serverov, proti ktorým sa majú spustiť testy (voliteľné)", "Server IP/hostname is correct": "IP/hostname servera je správny", "Server IP:": "IP servera:", + "Server SSH port:": "SSH port servera:", "Server is accessible:": "Server je dostupný:", "Server is online": "Server je online", "Server is running": "Server beží", @@ -6394,6 +6415,7 @@ "Share Access Error": "Chyba prístupu k zdieľaniu", "Share Name": "Názov zdieľania", "Share Options": "Možnosti zdieľania", + "Share a local USB device": "Zdieľať miestne USB zariadenie", "Share added successfully.": "Zdieľanie bolo úspešne pridané.", "Share deleted and Samba service restarted.": "Zdieľanie bolo vymazané a služba Samba reštartovaná.", "Share exists:": "Zdieľanie existuje:", @@ -6401,6 +6423,7 @@ "Share name:": "Názov zdieľania:", "Share not found on server:": "Zdieľanie sa na serveri nenašlo:", "Share path:": "Cesta zdieľania:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Zdieľajte vybrané USB zariadenia cez SSH alebo pripojte tento počítač Linux k serveru USB/IP.", "Share updated successfully.": "Zdieľanie bolo úspešne aktualizované.", "Share:": "Zdieľanie:", "ShareCoveX panel": "Panel ShareCoveX", @@ -6669,6 +6692,8 @@ "Still has issues": "Stále má problémy", "Stop - shuts the guest down during backup": "Stop – vypne hosťa počas zálohovania", "Stop it first and run this option again.": "Najprv ju zastavte a potom túto možnosť spustite znova.", + "Stop sharing a USB device": "Ukončiť zdieľanie USB zariadenia", + "Stop sharing this device? An attached remote client will disconnect.": "Ukončiť zdieľanie tohto zariadenia? Pripojený vzdialený klient bude odpojený.", "Stop that VM, then choose:": "Zastavte VM a potom vyberte:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Zastavte CT, odpojte disk na HOSTE a pripojte ho znova pomocou:", "Stop the VM/CT before formatting this disk.": "Pred formátovaním tohto disku zastavte VM/CT.", @@ -7373,6 +7398,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "Vybraná Intel GPU má reset podporu mimo FLR a neznámy podtyp", "The selected Intel GPU is currently in power state D3cold": "Vybraná Intel GPU je aktuálne v napájacom stave D3cold", "The selected Intel render device does not exist:": "Vybrané zariadenie Intel render neexistuje:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Vybrané USB zariadenie prestane byť dostupné miestnym aplikáciám a hosťom. Naraz ho môže používať iba jeden vzdialený klient. Zdieľať toto zariadenie?", "The selected VM": "Vybraná VM", "The selected VM is running.": "Vybraná VM beží.", "The selected base folder does not exist and could not be created:": "Vybraný základný priečinok neexistuje a nepodarilo sa ho vytvoriť:", @@ -7711,6 +7737,9 @@ "USB drives mounted now:": "Aktuálne pripojené USB disky:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "Uzol USB alebo sériového zariadenia", + "USB/IP configuration updated. Open status to check the connection.": "Konfigurácia USB/IP bola aktualizovaná. Otvorte stav a skontrolujte pripojenie.", + "USB/IP over SSH": "USB/IP cez SSH", + "USB/IP server IP address or DNS hostname:": "IP adresa alebo DNS názov hostiteľa servera USB/IP:", "UUP Dump script not found.": "Skript UUP Dump sa nenašiel.", "UUp Dump ISO creator Custom": "Vlastný tvorca ISO cez UUP Dump", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity je bezplatný, ľahký a ľahko použiteľný domáci server pre vaše komiksy a ebooky. Použite ho na prístup k súborom odkiaľkoľvek, s tabletom, e-čítačkou, telefónom alebo počítačom.", @@ -7867,6 +7896,7 @@ "Untrusted or modified NVIDIA hook": "Nedôveryhodný alebo zmenený spúšťací skript NVIDIA", "Unused image removed from the cache:": "Nepoužívaný obraz odstránený z vyrovnávacej pamäte:", "Unused images removed from the cache:": "Nepoužívané obrazy odstránené z vyrovnávacej pamäte:", + "Unused local loopback TCP port for this device:": "Voľný miestny TCP port spätnej slučky pre toto zariadenie:", "Update": "Aktualizácia", "Update Available": "Dostupná aktualizácia", "Update Ceph repository (Only if using Ceph):": "Aktualizujte Ceph repozitár (iba ak používate Ceph):", @@ -8148,6 +8178,7 @@ "View Disk Storages": "Zobraziť diskové úložiská", "View Mount Points": "Zobraziť mount pointy", "View NFS Mounts (pvesm + fstab)": "Zobraziť NFS mounty (pvesm + fstab)", + "View USB/IP status": "Zobraziť stav USB/IP", "View backup metadata": "Zobraziť metadáta zálohy", "View current paths": "Zobraziť aktuálne cesty", "View existing folders in /mnt": "Zobraziť existujúce priečinky v /mnt", @@ -9021,36 +9052,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Dáta na disku sa NEVYMAŽÚ.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ Disk sa odpojí a odstráni z /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ Záznam v /etc/fstab bude odstránený.", - "⚠ The disk will be unmounted.": "⚠ Disk bude odpojený.", - "Absolute path of the client SSH private key:": "Absolútna cesta k súkromnému SSH kľúču klienta:", - "Connect a remote USB device": "Pripojiť vzdialené USB zariadenie", - "Disable USB/IP server": "Zakázať server USB/IP", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Zakázať server a uvoľniť všetky USB zariadenia spravované ProxMenuxom? Uložený výber sa zachová pre ďalšie povolenie.", - "Enable USB/IP server": "Povoliť server USB/IP", - "Install the USB/IP dependencies from the configured Debian repositories?": "Nainštalovať závislosti USB/IP z nakonfigurovaných repozitárov Debianu?", - "Linux guest setup and migration notes": "Nastavenie hostí Linux a poznámky k migrácii", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Nenašli sa žiadne vhodné USB zariadenia. Rozbočovače, veľkokapacitné úložiská a sieťové adaptéry sú vylúčené.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Ak sa služba USB/IP neočakávane zastaví, ukončite zdieľanie, kým je zariadenie ešte pripojené, aby sa uvoľnilo. V zriedkavých prípadoch ho uvoľní iba reštart hosta.", - "No shared devices are available on this server.": "Na tomto serveri nie sú k dispozícii žiadne zdieľané zariadenia.", - "Remove a remote USB connection": "Odstrániť vzdialené USB pripojenie", - "Remove this connection and detach its USB device?": "Odstrániť toto pripojenie a odpojiť jeho USB zariadenie?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Klienta spustite vo virtuálnom stroji Linux, ktorý potrebuje USB zariadenie. Nainštalujte usbip, openssh-client a kmod a potom skopírujte usbip_manager.py na rovnakú cestu ako na serveri. Pred pridaním pripojenia nastavte overovanie kľúčom a overte hostiteľský kľúč servera. Klient používa jadro hosťa a po migrácii sa môže znova pripojiť, zatiaľ čo fyzické USB zariadenie zostáva na serveri. Neprivilegované LXC a Home Assistant OS vyžadujú vlastné nastavenie jadra, zariadení alebo doplnkov. Fyzické zariadenie môže byť pripojené iba k jednému klientovi naraz.", - "Run this menu as root.": "Túto ponuku spustite ako root.", - "Select a saved USB/IP device:": "Vyberte uložené zariadenie USB/IP:", - "Select the USB device to share:": "Vyberte USB zariadenie na zdieľanie:", - "Select the remote USB device:": "Vyberte vzdialené USB zariadenie:", - "Server SSH port:": "SSH port servera:", - "Share a local USB device": "Zdieľať miestne USB zariadenie", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Zdieľajte vybrané USB zariadenia cez SSH alebo pripojte tento počítač Linux k serveru USB/IP.", - "Stop sharing a USB device": "Ukončiť zdieľanie USB zariadenia", - "Stop sharing this device? An attached remote client will disconnect.": "Ukončiť zdieľanie tohto zariadenia? Pripojený vzdialený klient bude odpojený.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Vybrané USB zariadenie prestane byť dostupné miestnym aplikáciám a hosťom. Naraz ho môže používať iba jeden vzdialený klient. Zdieľať toto zariadenie?", - "USB/IP configuration updated. Open status to check the connection.": "Konfigurácia USB/IP bola aktualizovaná. Otvorte stav a skontrolujte pripojenie.", - "USB/IP over SSH": "USB/IP cez SSH", - "USB/IP server IP address or DNS hostname:": "IP adresa alebo DNS názov hostiteľa servera USB/IP:", - "Unused local loopback TCP port for this device:": "Voľný miestny TCP port spätnej slučky pre toto zariadenie:", - "View USB/IP status": "Zobraziť stav USB/IP", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Najprv na serveri povoľte samostatný verejný kľúč klienta. Obmedzený účet USB/IP nemôže spustiť shell ani presmerovať iné sockety. Pred pripojením overte hostiteľský kľúč servera; neznáme kľúče sa odmietnu.", - "Authorize a client SSH public key": "Povoliť verejný SSH kľúč klienta", - "Path to the client SSH public key on this server:": "Cesta k verejnému SSH kľúču klienta na tomto serveri:" + "⚠ The disk will be unmounted.": "⚠ Disk bude odpojený." } diff --git a/lang/sv.json b/lang/sv.json index 56cedfeb..4d8c8aed 100644 --- a/lang/sv.json +++ b/lang/sv.json @@ -246,6 +246,7 @@ "Aborted": "Avbruten", "About to restore": "På väg att återställa", "Absolute directory path to use as backup target:": "Absolut katalogsökväg att använda som mål för säkerhetskopiering:", + "Absolute path of the client SSH private key:": "Absolut sökväg till klientens privata SSH-nyckel:", "Absolute path to a file or directory you want backed up:": "Absolut sökväg till en fil eller katalog som du vill säkerhetskopiera:", "Acceleration": "Acceleration", "Acceleration configuration cancelled": "Acceleration konfiguration inställd", @@ -619,6 +620,8 @@ "Authentication:": "Autentisering:", "Authorization failed": "Auktorisering misslyckades", "Authorization successful": "Auktoriseringen lyckades", + "Authorize a client SSH public key": "Auktorisera en klients offentliga SSH-nyckel", + "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Auktorisera först en separat offentlig klientnyckel på servern. Det begränsade USB/IP-kontot kan inte starta ett skal eller vidarebefordra andra socklar. Verifiera serverns värdnyckel innan du ansluter; okända nycklar avvisas.", "Authorize this key on the server": "Auktorisera denna nyckel på servern", "Authorize via 'pct exec' (Borg server is an LXC on a PVE host I can SSH into)": "Auktorisera via 'pct exec' (Borg-servern är en LXC på en PVE-värd jag kan SSH till)", "Authorized": "Auktoriserad", @@ -1299,6 +1302,7 @@ "Conflicting utilities removed": "Motstridiga verktyg har tagits bort", "Connect Zigbee devices to MQTT with a browser-based setup interface.": "Anslut Zigbee-enheter till MQTT med ett webbaserat konfigurationsgränssnitt.", "Connect a Coral Accelerator and try again.": "Anslut en Coral Accelerator och försök igen.", + "Connect a remote USB device": "Anslut en fjärransluten USB-enhet", "Connect it, or remove it from the container in Proxmox (Resources), and run the recovery again.": "Anslut den, eller ta bort den från behållaren i Proxmox (Resurser), och kör återställningen igen.", "Connect your devices and users together in your own secure virtual private network.": "Anslut dina enheter och användare tillsammans i ditt eget säkra virtuella privata nätverk.", "Connect your devices into a secure WireGuard®-based overlay network with SSO, MFA and granular access controls.": "Anslut dina enheter till ett säkert WireGuard®-baserat överläggsnätverk med SSO, MFA och granulära åtkomstkontroller.", @@ -1961,12 +1965,14 @@ "Directus administrator": "Directus-administratör", "Disable NIC Offloading (Intel e1000e)": "Inaktivera NIC-avlastning (Intel e1000e)", "Disable Secure Boot in the UEFI firmware and run the installer again. Nothing has been changed.": "Inaktivera Secure Boot i UEFI-firmware och kör installationsprogrammet igen. Inget har ändrats.", + "Disable USB/IP server": "Inaktivera USB/IP-servern", "Disable autostart on conflicting VM": "Inaktivera autostart på VM i konflikt", "Disable autostart on one VM to avoid startup conflicts.": "Inaktivera autostart på en virtuell dator för att undvika startkonflikter.", "Disable job": "Inaktivera jobbet", "Disable kernel audit messages (optional but recommended):": "Inaktivera kärngranskningsmeddelanden (valfritt men rekommenderas):", "Disable onboot on affected VM(s)/CT(s)": "Inaktivera onboot på berörda virtuella dator(er)/CT(ar)", "Disable portmapper/rpcbind": "Inaktivera portmapper/rpcbind", + "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Inaktivera servern och frigör alla USB-enheter som hanteras av ProxMenux? Sparade val behålls till nästa aktivering.", "Disabled": "Inaktiverad", "Disabling High Availability services...": "Inaktiverar tjänster med hög tillgänglighet...", "Disabling ZFS autotrim applied by ProxMenux...": "Inaktiverar ZFS autotrim som tillämpas av ProxMenux...", @@ -2199,6 +2205,7 @@ "Enable Remote Desktop (RDP) before disabling the virtual display.": "Aktivera Remote Desktop (RDP) innan du inaktiverar den virtuella skärmen.", "Enable SSD emulation for this disk?": "Vill du aktivera SSD-emulering för den här disken?", "Enable TCP BBR/Fast Open control": "Aktivera TCP BBR/Fast Open-kontroll", + "Enable USB/IP server": "Aktivera USB/IP-servern", "Enable VA-API transcoding and HDR10/Dolby Vision to SDR tone mapping": "Aktivera VA-API-transkodning och HDR10/Dolby Vision till SDR-tonkartläggning", "Enable VA-API, hardware encoding and OpenCL tone mapping in Jellyfin": "Aktivera VA-API, hårdvarukodning och OpenCL tonkartläggning i Jellyfin", "Enable VFIO IOMMU support": "Aktivera VFIO IOMMU-stöd", @@ -3212,6 +3219,7 @@ "If pvesm path returned a DEVICE (LVM):": "Om pvesm path returnerade en ENHET (LVM):", "If pvesm path returned a DIRECTORY (ZFS/BTRFS):": "Om pvesm path returnerade en KATALOG (ZFS/BTRFS):", "If repositories error:": "Om förrådsfel:", + "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Om USB/IP-tjänsten stoppas oväntat, sluta dela enheten medan den fortfarande är ansluten för att frigöra den. I sällsynta fall frigörs den bara genom en omstart av värden.", "If the container had already been changed, its previous native backup is restored. Shared host directories are not reverted. The disks of the failed attempt are removed when the cleanup succeeds.": "Om behållaren redan hade ändrats, återställs dess tidigare inbyggda säkerhetskopia. Delade värdkataloger återställs inte. Diskarna för det misslyckade försöket tas bort när rensningen lyckas.", "If the host freezes, remove hostpci entries from": "Om värden fryser, ta bort hostpci-poster från", "If the image channel has a new version, the CT is stopped, backed up and verified, and replaced with the new image to update the container. If anything fails, the backup is restored.": "Om bildkanalen har en ny version stoppas CT, säkerhetskopieras och verifieras och ersätts med den nya bilden för att uppdatera behållaren. Om något misslyckas återställs säkerhetskopian.", @@ -3406,6 +3414,7 @@ "Install server packages inside CT:": "Installera serverpaket inuti CT:", "Install terminal multiplexers": "Installera terminalmultiplexer", "Install the Edge TPU runtime (libedgetpu1-std)": "Installera Edge TPU runtime (libedgetpu1-std)", + "Install the USB/IP dependencies from the configured Debian repositories?": "Installera USB/IP-beroendena från de konfigurerade Debian-paketförråden?", "Install this image?": "Installera den här bilden?", "Install with Cloud-Init script": "Installera med Cloud-Init-skript", "Install with ISO from UUP Dump": "Installera med ISO från UUP Dump", @@ -3891,6 +3900,7 @@ "Line to paste (single line, including \"command=...\" prefix):": "Rad att klistra in (en rad, inklusive \"command=...\" prefix):", "LinkStack": "LinkStack", "Linux Installation Options": "Linux installationsalternativ", + "Linux guest setup and migration notes": "Konfiguration av Linux-gäster och information om migrering", "Linux/Mac path:": "Linux/Mac sökväg:", "LinuxServer Jellyfin with optional GPU passthrough": "LinuxServer Jellyfin med valfri GPU genomgång", "LinuxServer MariaDB requires a user, database and password": "LinuxServer MariaDB requires en användare, databas och lösenord", @@ -4648,6 +4658,7 @@ "No duplicate IP addresses": "Inga dubbletter av IP-adresser", "No duplicate repositories found": "Inga dubbletter av arkiv hittades", "No eligible Controller/NVMe devices remain after SR-IOV filtering. Skipping.": "Inga lämpliga styrenhets-/NVMe-enheter återstår efter SR-IOV-filtreringen. Hoppar över.", + "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Inga lämpliga USB-enheter hittades. Hubbar, masslagringsenheter och nätverksadaptrar är undantagna.", "No eligible controllers remain after SR-IOV filtering.": "Inga kvalificerade kontroller finns kvar efter SR-IOV-filtrering.", "No encryption key is stored on this host. Choose how to set one up:": "Ingen krypteringsnyckel lagras på denna värd. Välj hur du ställer in en:", "No exportable VM disks were found (CD-ROM/cloud-init are excluded).": "Inga exporterbara VM-diskar hittades (CD-ROM/cloud-init är undantagna).", @@ -4732,6 +4743,7 @@ "No self-test log available for": "Ingen självtestlogg tillgänglig för", "No server IP or hostname provided.": "Ingen server-IP eller värdnamn har angetts.", "No share access test succeeded with guest authentication.": "Inget test av delad åtkomst lyckades med gästautentisering.", + "No shared devices are available on this server.": "Inga delade enheter är tillgängliga på denna server.", "No shared media content.": "Inget delat medieinnehåll.", "No shared mount detected. Applying standard local access.": "Inget delat fäste upptäcktes. Använder standard lokal åtkomst.", "No shares configured.": "Inga delningar har konfigurerats.", @@ -5130,6 +5142,7 @@ "Path of the Compose file": "Path of the Compose filen", "Path of the oci-compose file": "Sökväg till oci-compose-filen", "Path removed:": "Sökväg borttagen:", + "Path to the client SSH public key on this server:": "Sökväg till klientens offentliga SSH-nyckel på den här servern:", "Path:": "Väg:", "Paths applied:": "Tillämpade sökvägar:", "Paths included in backup": "Sökvägar som ingår i säkerhetskopia", @@ -5675,6 +5688,7 @@ "Remove Proxmox NFS storage:": "Ta bort Proxmox NFS-lagring:", "Remove Proxmox iSCSI storage:": "Ta bort Proxmox iSCSI-lagring:", "Remove Secure Gateway? State will be preserved.": "Ta bort Secure Gateway? Staten kommer att bevaras.", + "Remove a remote USB connection": "Ta bort en fjärransluten USB-anslutning", "Remove custom paths": "Ta bort anpassade sökvägar", "Remove disk references from affected VM(s)/CT(s) config": "Ta bort diskreferenser från berörda virtuella datorer/CT-konfigurationer", "Remove every registered gasket DKMS version": "Ta bort alla registrerade gasket DKMS-versioner", @@ -5695,6 +5709,7 @@ "Remove the lock left on a container by an interrupted task": "Ta bort låset som en avbruten uppgift lämnat på en container", "Remove the saved credentials for {registry}?\nRunning apps will keep working.": "Ta bort de sparade referenserna för {registry}?\nAppar som körs fortsätter att fungera.", "Remove the unprivileged flag from configuration:": "Ta bort den oprivilegierade flaggan från konfigurationen:", + "Remove this connection and detach its USB device?": "Ta bort denna anslutning och koppla från dess USB-enhet?", "Remove unused packages and their config": "Ta bort oanvända paket och deras konfiguration", "Remove: delete the application and its containers": "Ta bort: ta bort programmet och dess behållare", "Removed": "Borttagen", @@ -5917,9 +5932,11 @@ "Run mode: Unattended": "Körläge: Oövervakad", "Run now": "Kör nu", "Run security audit now": "Kör säkerhetsgranskning nu", + "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Kör klienten i den Linux-VM som behöver USB-enheten. Installera usbip, openssh-client och kmod och kopiera sedan usbip_manager.py till samma sökväg som på servern. Konfigurera nyckelautentisering och verifiera serverns värdnyckel innan du lägger till en anslutning. Klienten använder gästens kärna och kan återansluta efter migrering medan den fysiska USB-enheten stannar på servern. Oprivilegierade LXC och Home Assistant OS behöver en egen konfiguration av kärna, enheter eller tillägg. En fysisk enhet kan bara vara ansluten till en klient åt gången.", "Run the following inside the VM:": "Kör följande inuti den virtuella datorn:", "Run the release-channel switch from an SSH session or the Proxmox host console with:": "Kör release-kanalväxeln från en SSH-session eller Proxmox-värdkonsolen med:", "Run the update from an SSH session or the Proxmox host console with:": "Kör uppdateringen från en SSH-session eller Proxmox-värdkonsolen med:", + "Run this menu as root.": "Kör denna meny som root.", "Run this operation as root.": "Kör denna åtgärd som root.", "Run upgrade checklist script:": "Kör skript för uppgraderingschecklista:", "Running": "Spring", @@ -6144,6 +6161,7 @@ "Select a new language for the menu:": "Välj ett nytt språk för menyn:", "Select a post-installation script:": "Välj ett efterinstallationsskript:", "Select a pre-configured Linux VM script to execute:": "Välj ett förkonfigurerat Linux VM-skript att köra:", + "Select a saved USB/IP device:": "Välj en sparad USB/IP-enhet:", "Select a script or action:": "Välj ett skript eller en åtgärd:", "Select a share to delete:": "Välj en delning att radera:", "Select a specific Coral or USB node, not the whole /dev": "Välj en specifik Coral eller USB-nod, inte hela/dev", @@ -6221,6 +6239,7 @@ "Select the Linux distribution to install:": "Välj Linux-distributionen att installera:", "Select the NAS system to install:": "Välj det NAS-system som ska installeras:", "Select the NVIDIA driver version to install:": "Välj NVIDIA-drivrutinsversionen att installera:", + "Select the USB device to share:": "Välj USB-enheten som ska delas:", "Select the VM to add the GPU to:": "Välj den virtuella datorn för att lägga till GPU:n:", "Select the VM to which you want to add disks:": "Välj den virtuella datorn som du vill lägga till diskar till:", "Select the VM where you want to import the disk image:": "Välj den virtuella datorn där du vill importera skivavbildningen:", @@ -6245,6 +6264,7 @@ "Select the parent job to attach to:": "Välj det överordnade jobbet som ska bifogas:", "Select the paths to restore (one per backup entry):": "Välj sökvägarna som ska återställas (en per säkerhetskopia):", "Select the privileged LXC container to convert:": "Välj den privilegierade LXC-behållaren att konvertera:", + "Select the remote USB device:": "Välj den fjärranslutna USB-enheten:", "Select the storage that will receive the backups:": "Välj lagringsutrymmet som ska ta emot säkerhetskopiorna:", "Select the storage volume for disk import:": "Välj lagringsvolym för diskimport:", "Select the sync interval (in hours):": "Välj synkroniseringsintervall (i timmar):", @@ -6331,6 +6351,7 @@ "Server IDs to test against, separated by commas (optional)": "Server-ID:n att testa mot, separerade med kommatecken (valfritt)", "Server IP/hostname is correct": "Serverns IP/värdnamn är korrekt", "Server IP:": "Server IP:", + "Server SSH port:": "Serverns SSH-port:", "Server is accessible:": "Servern är tillgänglig:", "Server is online": "Servern är online", "Server is running": "Servern körs", @@ -6392,6 +6413,7 @@ "Share Access Error": "Dela åtkomstfel", "Share Name": "Dela namn", "Share Options": "Delningsalternativ", + "Share a local USB device": "Dela en lokal USB-enhet", "Share added successfully.": "Delningen har lagts till.", "Share deleted and Samba service restarted.": "Delningen raderades och Samba-tjänsten startade om.", "Share exists:": "Delning finns:", @@ -6399,6 +6421,7 @@ "Share name:": "Dela namn:", "Share not found on server:": "Delningen hittades inte på servern:", "Share path:": "Dela sökväg:", + "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Dela valda USB-enheter via SSH eller anslut denna Linux-dator till en USB/IP-server.", "Share updated successfully.": "Delningen har uppdaterats.", "Share:": "Dela:", "ShareCoveX panel": "ShareCoveX panel", @@ -6667,6 +6690,8 @@ "Still has issues": "Har fortfarande problem", "Stop - shuts the guest down during backup": "Stopp - stänger av gästen under säkerhetskopiering", "Stop it first and run this option again.": "Stoppa det först och kör det här alternativet igen.", + "Stop sharing a USB device": "Sluta dela en USB-enhet", + "Stop sharing this device? An attached remote client will disconnect.": "Sluta dela denna enhet? En ansluten fjärrklient kommer att kopplas från.", "Stop that VM, then choose:": "Stoppa den VM och välj sedan:", "Stop the CT, unmount the disk on the HOST, and remount with:": "Stoppa CT, avmontera disken på HOST och montera om med:", "Stop the VM/CT before formatting this disk.": "Stoppa VM/CT innan du formaterar denna disk.", @@ -7372,6 +7397,7 @@ "The selected Intel GPU has non-FLR reset support and unknown subtype": "Den valda Intel GPU:n har stöd för icke-FLR-återställning och okänd undertyp", "The selected Intel GPU is currently in power state D3cold": "Den valda Intel GPU:n är för närvarande i strömtillstånd D3cold", "The selected Intel render device does not exist:": "Den valda Intel render-enheten finns inte:", + "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Den valda USB-enheten blir otillgänglig för lokala program och gäster. Bara en fjärrklient kan använda den åt gången. Dela denna enhet?", "The selected VM": "Den valda virtuella datorn", "The selected VM is running.": "Den valda virtuella datorn körs.", "The selected base folder does not exist and could not be created:": "Den valda basmappen finns inte och kunde inte skapas:", @@ -7711,6 +7737,9 @@ "USB drives mounted now:": "USB-enheter monterade nu:", "USB libedgetpu1": "USB libedgetpu1", "USB or serial device node": "USB eller seriell enhetsnod", + "USB/IP configuration updated. Open status to check the connection.": "USB/IP-konfigurationen har uppdaterats. Öppna status för att kontrollera anslutningen.", + "USB/IP over SSH": "USB/IP via SSH", + "USB/IP server IP address or DNS hostname:": "USB/IP-serverns IP-adress eller DNS-värdnamn:", "UUP Dump script not found.": "UUP Dump-skript hittades inte.", "UUp Dump ISO creator Custom": "UUp Dump ISO-skapare Anpassad", "Ubooquity is a free, lightweight and easy-to-use home server for your comics and ebooks. Use it to access your files from anywhere, with a tablet, an e-reader, a phone or a computer.": "Ubooquity är en gratis, lätt och lättanvänd hemserver för dina serier och e-böcker. Använd den för att komma åt dina filer var som helst, med en surfplatta, en e-läsare, en telefon eller en dator.", @@ -7867,6 +7896,7 @@ "Untrusted or modified NVIDIA hook": "Untrusted eller modifierad NVIDIA hook", "Unused image removed from the cache:": "Oanvänd bild bort från cache:", "Unused images removed from the cache:": "Oanvända bilder som tagits bort från cache:", + "Unused local loopback TCP port for this device:": "Ledig lokal TCP-port på loopback för denna enhet:", "Update": "Uppdatering", "Update Available": "Uppdatering tillgänglig", "Update Ceph repository (Only if using Ceph):": "Uppdatera Ceph arkiv (endast om du använder Ceph):", @@ -8148,6 +8178,7 @@ "View Disk Storages": "Visa disklagringar", "View Mount Points": "Se Mount Points", "View NFS Mounts (pvesm + fstab)": "Visa NFS-fästen (pvesm + fstab)", + "View USB/IP status": "Visa USB/IP-status", "View backup metadata": "Visa metadata för säkerhetskopiering", "View current paths": "Visa aktuella vägar", "View existing folders in /mnt": "Visa befintliga mappar i /mnt", @@ -9021,36 +9052,5 @@ "⚠ Disk data will NOT be erased.": "⚠ Diskdata kommer INTE att raderas.", "⚠ Disk will be unmounted and removed from /etc/fstab.": "⚠ Disken kommer att avmonteras och tas bort från /etc/fstab.", "⚠ The /etc/fstab entry will be removed.": "⚠ /etc/fstab-posten kommer att tas bort.", - "⚠ The disk will be unmounted.": "⚠ Disken kommer att avmonteras.", - "Absolute path of the client SSH private key:": "Absolut sökväg till klientens privata SSH-nyckel:", - "Connect a remote USB device": "Anslut en fjärransluten USB-enhet", - "Disable USB/IP server": "Inaktivera USB/IP-servern", - "Disable the server and release all USB devices managed by ProxMenux? Saved selections are kept for the next enable.": "Inaktivera servern och frigör alla USB-enheter som hanteras av ProxMenux? Sparade val behålls till nästa aktivering.", - "Enable USB/IP server": "Aktivera USB/IP-servern", - "Install the USB/IP dependencies from the configured Debian repositories?": "Installera USB/IP-beroendena från de konfigurerade Debian-paketförråden?", - "Linux guest setup and migration notes": "Konfiguration av Linux-gäster och information om migrering", - "No eligible USB devices found. Hubs, mass storage and network adapters are excluded.": "Inga lämpliga USB-enheter hittades. Hubbar, masslagringsenheter och nätverksadaptrar är undantagna.", - "If the USB/IP service stops unexpectedly, stop sharing while the device is still connected to release it. In rare cases only a host reboot releases it.": "Om USB/IP-tjänsten stoppas oväntat, sluta dela enheten medan den fortfarande är ansluten för att frigöra den. I sällsynta fall frigörs den bara genom en omstart av värden.", - "No shared devices are available on this server.": "Inga delade enheter är tillgängliga på denna server.", - "Remove a remote USB connection": "Ta bort en fjärransluten USB-anslutning", - "Remove this connection and detach its USB device?": "Ta bort denna anslutning och koppla från dess USB-enhet?", - "Run the client inside the Linux VM that needs the USB device. Install usbip, openssh-client and kmod, then copy usbip_manager.py to the same path as on the server. Configure key authentication and verify the server host key before adding a connection. The client uses the guest kernel and can reconnect after migration while the physical USB device stays on the server. Unprivileged LXC and Home Assistant OS need their own kernel/device or add-on setup. A physical device supports one attached client at a time.": "Kör klienten i den Linux-VM som behöver USB-enheten. Installera usbip, openssh-client och kmod och kopiera sedan usbip_manager.py till samma sökväg som på servern. Konfigurera nyckelautentisering och verifiera serverns värdnyckel innan du lägger till en anslutning. Klienten använder gästens kärna och kan återansluta efter migrering medan den fysiska USB-enheten stannar på servern. Oprivilegierade LXC och Home Assistant OS behöver en egen konfiguration av kärna, enheter eller tillägg. En fysisk enhet kan bara vara ansluten till en klient åt gången.", - "Run this menu as root.": "Kör denna meny som root.", - "Select a saved USB/IP device:": "Välj en sparad USB/IP-enhet:", - "Select the USB device to share:": "Välj USB-enheten som ska delas:", - "Select the remote USB device:": "Välj den fjärranslutna USB-enheten:", - "Server SSH port:": "Serverns SSH-port:", - "Share a local USB device": "Dela en lokal USB-enhet", - "Share selected USB devices through SSH, or connect this Linux machine to a USB/IP server.": "Dela valda USB-enheter via SSH eller anslut denna Linux-dator till en USB/IP-server.", - "Stop sharing a USB device": "Sluta dela en USB-enhet", - "Stop sharing this device? An attached remote client will disconnect.": "Sluta dela denna enhet? En ansluten fjärrklient kommer att kopplas från.", - "The selected USB device will become unavailable to local applications and guests. Only one remote client can use it at a time. Share this device?": "Den valda USB-enheten blir otillgänglig för lokala program och gäster. Bara en fjärrklient kan använda den åt gången. Dela denna enhet?", - "USB/IP configuration updated. Open status to check the connection.": "USB/IP-konfigurationen har uppdaterats. Öppna status för att kontrollera anslutningen.", - "USB/IP over SSH": "USB/IP via SSH", - "USB/IP server IP address or DNS hostname:": "USB/IP-serverns IP-adress eller DNS-värdnamn:", - "Unused local loopback TCP port for this device:": "Ledig lokal TCP-port på loopback för denna enhet:", - "View USB/IP status": "Visa USB/IP-status", - "Authorize a dedicated client public key on the server first. The restricted USB/IP account cannot run a shell or forward other sockets. Verify the server host key before connecting; unknown keys are rejected.": "Auktorisera först en separat offentlig klientnyckel på servern. Det begränsade USB/IP-kontot kan inte starta ett skal eller vidarebefordra andra socklar. Verifiera serverns värdnyckel innan du ansluter; okända nycklar avvisas.", - "Authorize a client SSH public key": "Auktorisera en klients offentliga SSH-nyckel", - "Path to the client SSH public key on this server:": "Sökväg till klientens offentliga SSH-nyckel på den här servern:" + "⚠ The disk will be unmounted.": "⚠ Disken kommer att avmonteras." }