{
  "meta": {
    "title": "Automated Post-Install Script | ProxMenux Documentation",
    "description": "The ProxMenux Automated post-install script applies a curated set of 14 safe, hardware-aware optimizations to a fresh Proxmox VE host with zero prompts. Reversible configuration changes are registered for later restoration.",
    "ogTitle": "Automated Post-Install Script | ProxMenux Documentation",
    "ogDescription": "14 curated optimizations applied to a fresh Proxmox VE host with zero prompts. Hardware-aware, with reversible configuration changes tracked."
  },
  "header": {
    "title": "Automated Post-Install Script",
    "description": "One click, zero prompts — ProxMenux applies a curated set of 14 safe optimizations that almost every Proxmox host benefits from. Reversible configuration changes are registered for Uninstall Optimizations; package upgrades are not described as reversible.",
    "section": "Post-Install · Automated"
  },
  "intro": {
    "title": "When to pick Automated",
    "body": "Run this on a freshly installed Proxmox host when you want the sensible baseline without making decisions. The script is idempotent — running it twice is safe, it just re-applies the same configurations. Opt-in features (Fastfetch, IOMMU, Ceph repo, HA, AMD fixes…) are intentionally <strong>not</strong> part of this path; pick them from <link>Customizable</link> if you need them."
  },
  "applies": {
    "heading": "What the script applies",
    "intro": "The optimizations are applied in this exact order. The <em>Category</em> column links to the detailed documentation of each change in the Customizable reference.",
    "headerNum": "#",
    "headerTool": "Tool",
    "headerWhat": "What it does",
    "headerCategory": "Category"
  },
  "optimizations": [
    {
      "tool": "APT repositories + full upgrade",
      "what": "Disables the enterprise pve-enterprise.sources and ceph.sources, writes a clean no-subscription source for the host's Debian codename, then runs apt update && apt full-upgrade -y (Proxmox's official upgrade command).",
      "category": "Basic Settings",
      "categorySlug": "basic-settings"
    },
    {
      "tool": "Subscription banner removal",
      "what": "Patches the web UI to hide the 'No valid subscription' banner. Asks for confirmation before applying; reversible from Uninstall Optimizations.",
      "category": "Customization",
      "categorySlug": "customization"
    },
    {
      "tool": "Force IPv4",
      "what": "Writes /etc/apt/apt.conf.d/99-force-ipv4 so apt uses IPv4 only — bypasses flaky IPv6 mirror setups.",
      "category": "Network",
      "categorySlug": "network"
    },
    {
      "tool": "Skip language packages",
      "what": "Writes /etc/apt/apt.conf.d/99-disable-translations to stop downloading locale-specific packages. Faster, lighter apt updates.",
      "category": "Basic Settings",
      "categorySlug": "basic-settings"
    },
    {
      "tool": "Increase system limits",
      "what": "Raises inotify watches, nofile/nproc limits, kernel keyring limits and fs.file-max across sysctl.d, limits.d, pam and systemd — high enough for container-heavy hosts.",
      "category": "System",
      "categorySlug": "system"
    },
    {
      "tool": "Memory tuning",
      "what": "Sets vm.swappiness=10, balanced dirty ratios, vm.max_map_count=262144 and compaction proactiveness when supported. The kernel's memory-overcommit policy is left at the Proxmox default.",
      "category": "System",
      "categorySlug": "system"
    },
    {
      "tool": "Kernel panic behaviour",
      "what": "Configures the host to reboot 10 seconds after a panic / oops / hardlockup instead of freezing indefinitely.",
      "category": "System",
      "categorySlug": "system"
    },
    {
      "tool": "Network stack tuning",
      "what": "TCP buffer sizing, IPv4 hardening (redirects off, rp_filter=2, martian log off), local port range 1024-65535, TCP MTU probing, RFC 1337, plus a helper at /usr/local/sbin/proxmenux-fwbr-tune wired to a oneshot systemd unit and a udev rule, so rp_filter=0 / log_martians=0 are re-applied to fwbr*/fwln*/fwpr*/tap* interfaces every time Proxmox recreates them at VM start/stop, reboot or live migration.",
      "category": "Network",
      "categorySlug": "network"
    },
    {
      "tool": "Bashrc customisation (root)",
      "what": "Colored PS1, common aliases (l/la/ll/ls/grep), timestamped history and bash-completion sourcing, all inside a PMX_CORE_BASHRC fenced block so it is easy to remove.",
      "category": "Customization",
      "categorySlug": "customization"
    },
    {
      "tool": "Log2RAM (SSD-aware, auto)",
      "what": "Reduces SSD/NVMe wear by moving /var/log to a tmpfs ramdisk with periodic disk sync. Installed from the upstream project when the root disk is SSD or NVMe. Sizes the ramdisk by host RAM (128M / 256M / 512M), schedules periodic sync and an auto-sync guard that vacuums at 80% and truncates hot logs at 92% before writing. Adjusts journald limits to fit in the ramdisk. Full details on <link>Log2RAM</link>.",
      "category": "Storage",
      "categorySlug": "storage"
    },
    {
      "tool": "ZFS autotrim (SSD-only)",
      "what": "Enables zpool autotrim=on on every ZFS pool whose vdevs are all SSD/NVMe with TRIM support (checks /sys/block/[dev]/queue/rotational and discard_granularity). Pools backed by HDDs are skipped automatically. Only pools actually changed by ProxMenux are recorded for uninstall — pools you set autotrim on manually are left alone.",
      "category": "Storage",
      "categorySlug": "storage"
    },
    {
      "tool": "Journald size limits",
      "what": "Forces persistent storage, caps SystemMaxUse=64M / RuntimeMaxUse=60M, sets compression, info-level logging (required for the Monitor). Skipped automatically when Log2RAM is active (it does its own adjustment).",
      "category": "System",
      "categorySlug": "system"
    },
    {
      "tool": "Logrotate tuning",
      "what": "Daily rotation with size cap 10M, 7 rotations, compression and copytruncate — Log2RAM-friendly.",
      "category": "System",
      "categorySlug": "system"
    },
    {
      "tool": "Persistent interface names",
      "what": "Writes one <code>/etc/systemd/network/10-proxmenux-&lt;iface&gt;.link</code> per physical NIC (each starting with a 'Managed by ProxMenux' header) that pins the MAC to the current name, so <code>eth0</code> / <code>enp…</code> names stay stable across reboots and new NIC additions.",
      "category": "Network",
      "categorySlug": "network"
    }
  ],
  "hardwareTitle": "Hardware-aware defaults",
  "hardwareBody": "The script reads the host hardware before applying settings. Log2RAM is only installed on SSD / NVMe root disks by default (it prompts if detection says otherwise). Log2RAM ramdisk size is picked from total RAM (<code>≤ 8 GB → 128M</code>, <code>≤ 16 GB → 256M</code>, <code>'>' 16 GB → 512M</code>). The journald limits are matched to the ramdisk size when Log2RAM is active, to avoid filling it.",
  "upgrade": {
    "heading": "Update and upgrade system",
    "intro": "The very first step of the Automated bundle is the Proxmox upgrade. Proxmox's own upgrade guidance for a running host (within the same major version) is to run:",
    "after": "That single line is the official command on any current Proxmox release. The Automated script runs <strong>exactly</strong> that, and wraps it with the repo hygiene and post-upgrade cleanup the official upgrade guide also recommends — same steps as the standalone <link>Proxmox System Update</link> utility:",
    "items": [
      "Disables the enterprise <code>pve-enterprise.sources</code> / <code>ceph.sources</code>, removes legacy repo files, writes a clean no-subscription source for the host's codename.",
      "Runs the upgrade non-interactively with <code>DEBIAN_FRONTEND=noninteractive</code> and <code>--force-confdef --force-confold</code> — config files you customised stay yours when upstream also changed them.",
      "Installs essential Proxmox packages if missing (<code>zfsutils-linux</code>, <code>proxmox-backup-restore-image</code>, <code>chrony</code>).",
      "LVM metadata sanity check, <code>apt-get autoremove -y</code> + <code>apt-get autoclean -y</code>, and a reboot prompt only if the kernel actually changed."
    ],
    "sameTitle": "Same updater, two entry points",
    "sameBody": "The Automated bundle and the standalone <link>Proxmox System Update</link> utility share the same underlying scripts (<code>update-pve8.sh</code> / <code>update-pve9_2.sh</code>). Use the utility on its own when you only want to upgrade the host without applying the rest of the optimizations."
  },
  "endResult": {
    "heading": "Expected end result",
    "body": "When the script finishes, you will see a success message with the per-step output and a reboot prompt (some kernel settings require a restart to take effect). Declining the reboot is safe; the settings apply at the next boot.",
    "imageAlt": "Automated post-install script — final terminal output showing each optimization applied successfully"
  },
  "notDoes": {
    "heading": "What this script does NOT do",
    "items": [
      "Timezone auto-detection (commented out upstream; use Customizable if you want it).",
      "Disable portmapper / rpcbind (see <secLink>Security</secLink>).",
      "Enable IOMMU / VFIO (see <virtLink>Virtualization</virtLink>).",
      "Install Fastfetch / Figurine / Ceph repo / HA / AMD CPU fixes (see <optLink>Optional</optLink>).",
      "Install pigz or apply ZFS ARC tuning (see <perfLink>Performance</perfLink> / <storLink>Storage</storLink>)."
    ]
  },
  "xshokTitle": "xshok-proxmox detection",
  "xshokBody": "If the host has previously run the <code>xshok-proxmox</code> script, ProxMenux detects the marker file and warns you before continuing. Some tweaks can overlap. The companion script is deprecated — if you decide to continue anyway, review <link>the overview</link> for context.",
  "revert": {
    "heading": "Reverting",
    "body": "Every tool in the table above registers itself in <code>/usr/local/share/proxmenux/installed_tools.json</code>. Open <link>Uninstall Optimizations</link> to pick individual items to revert. Backups of modified config files are placed next to the originals with a <code>.bak</code> suffix."
  },
  "related": {
    "heading": "Related",
    "items": [
      {
        "label": "Customizable Post-Install",
        "href": "/docs/post-install/customizable",
        "tail": " — pick exactly what you want from the same catalog."
      },
      {
        "label": "Uninstall Optimizations",
        "href": "/docs/post-install/uninstall",
        "tail": " — revert any subset of what was applied here."
      },
      {
        "label": "Useful System Commands",
        "href": "/docs/help-info/system-commands",
        "tail": " — verify the changes (uptime, free, journalctl, etc.)."
      },
      {
        "label": "Post-Install overview",
        "href": "/docs/post-install",
        "tail": "."
      }
    ]
  }
}