From fb645dd84c2d2bbfe0f2c71873b822748f62012a Mon Sep 17 00:00:00 2001 From: Donald Zou Date: Tue, 16 Sep 2025 19:00:52 +0800 Subject: [PATCH] Update ko-KR.json --- src/static/locales/ko-KR.json | 710 +++++++++++++++++----------------- 1 file changed, 355 insertions(+), 355 deletions(-) diff --git a/src/static/locales/ko-KR.json b/src/static/locales/ko-KR.json index 2c71fcfa..477754f6 100644 --- a/src/static/locales/ko-KR.json +++ b/src/static/locales/ko-KR.json @@ -1,369 +1,369 @@ { - " file": " 파일", - "(.*) Available IP Address": "$1 사용 가능한 IP 주소", - "(.*) Minutes": "$1 분", - "(.*) Seconds": "$1 초", - "(.*) Used": "", - "(.*) is off": "$1 꺼짐", - "(.*) is on": "$1 켜짐", - "([0-9].*) Backups?": "$1 백업", - "([0-9].*) Peers?": "$1 피어", - "([0-9]{1,}) Interfaces": "", - "([0-9]{1,}) Partitions": "", - "(v[0-9.]{1,}) is now available for update!": "$1 업데이트가 가능합니다!", - "1\\. Please scan the following QR Code to generate TOTP with your choice of authenticator": "1. 다음 QR 코드를 스캔하여 선택한 인증기로 TOTP를 생성하세요", - "2\\. Enter the TOTP generated by your authenticator to verify": "2. 인증기에서 생성된 TOTP를 입력하여 확인하세요", - "API Key": "API 키", - "API Key created": "API 키가 생성되었습니다", - "API Key deleted": "API 키가 삭제되었습니다", - "API Keys": "API 키", - "API Keys function is failed to disable": "API 키 기능 비활성화에 실패했습니다", - "API Keys function is failed to enable": "API 키 기능 활성화에 실패했습니다", - "API Keys function is successfully disabled": "API 키 기능이 성공적으로 비활성화되었습니다", - "API Keys function is successfully enabled": "API 키 기능이 성공적으로 활성화되었습니다", - "Access Remote Server": "원격 서버 접속", - "Access Restricted": "접근 제한됨", - "Account Settings": "계정 설정", - "Active Jobs": "활성 작업", - "Add": "추가", - "Add Peers": "피어 추가", - "Adding\\.\\.\\.": "추가 중...", - "Address": "주소", - "Advanced Options": "", - "All Active Jobs": "모든 활성 작업", - "All connected peers will get disconnected": "연결된 모든 피어의 연결이 끊깁니다", - "Allow Access": "접근 허용", - "Allow access successfully": "접근 허용에 성공했습니다", - "Allowed IP already taken by another peer": "허용된 IP가 다른 피어에 의해 이미 사용 중입니다", - "Allowed IPs": "허용된 IP", - "Allowed IPs Validation": "", - "Allowed IPs already taken by another peer": "허용된 IP가 다른 피어에 의해 이미 사용 중입니다", - "Allowed IPs is invalid": "허용된 IP가 올바르지 않습니다", - "Allowing Access\\.\\.\\.": "접근 허용 중...", - "AmneziaWG Peer Setting": "", - "Appearance": "외관", - "Are you sure to delete": "정말로 삭제하시겠습니까", - "Are you sure to delete this API key\\?": "이 API 키를 삭제하시겠습니까?", - "Are you sure to delete this backup\\?": "이 백업을 삭제하시겠습니까?", - "Are you sure to delete this configuration\\?": "이 구성을 삭제하시겠습니까?", - "Are you sure to delete this peer\\?": "정말로 이 피어를 삭제하시겠습니까", - "Are you sure to restore this backup\\?": "", - "Average / Min / Max Round Trip Time": "평균 / 최소 / 최대 왕복 시간", - "Average RTT \\(ms\\)": "", - "Backup": "백업", - "Backup & Restore": "백업 & 복원", - "Backup Date": "백업 날짜", - "Backup not selected": "백업이 선택되지 않았습니다", - "Both configuration file \\(\\.conf\\) and database table related to this configuration will get deleted": "이 구성과 관련된 구성 파일 (.conf) 및 데이터베이스 테이블이 삭제됩니다", - "Bulk Add": "일괄 추가", - "By adding peers by bulk, each peer's name will be auto generated, and Allowed IP will be assign to the next available IP\\.": "피어를 일괄로 추가하면 각 피어의 이름이 자동으로 생성되고 허용된 IP는 사용 가능한 다음 IP에 할당됩니다.", - "CPU": "", - "CPU Usage": "", - "Cancel": "취소", - "Checking backups...": "백업 확인 중...", - "Checking for update...": "업데이트 확인 중...", - "Clear Selection": "선택 해제", - "Click": "클릭", - "Click to change a backup": "백업을 변경하려면 클릭하세요", - "Complete": "완료", - "Configuration": "구성", - "Configuration File": "", - "Configuration Name": "구성 이름", - "Configuration Settings": "구성 설정", - "Configuration deleted": "구성이 삭제되었습니다", - "Configuration does not exist": "구성이 존재하지 않습니다", - "Configuration name already exist\\.": "구성 이름이 이미 존재합니다.", - "Configuration name can only contain 15 lower/uppercase alphabet, numbers, underscore, equal sign, plus sign, period and hyphen\\.": "구성 이름은 15자 이하의 소문자/대문자 알파벳, 숫자, 밑줄, 등호, 더하기 기호, 마침표 및 하이픈만 포함할 수 있습니다.", - "Configuration name is invalid. Possible reasons:": "구성 이름이 올바르지 않습니다. 가능한 원인:", - "Configuration restored": "구성이 복원되었습니다", - "Configuration saved": "구성이 저장되었습니다", - "Configurations": "구성들", - "Configurations Directory": "구성 디렉토리", - "Confirm \\& edit restore information": "복원 정보 확인 & 편집", - "Confirm password": "비밀번호 확인", - "Connected Peers": "연결된 피어", - "Contain": "포함", - "Count": "개수", - "Create": "생성", - "Create API Key": "API 키 생성", - "Create Backup": "백업 생성", - "Create an account": "계정 생성", - "Creating\\.\\.\\.": "생성 중...", - "Current Password": "현재 비밀번호", - "Current Version:": "현재 버전:", - "Currently the peer is not sharing": "현재 이 피어는 공유 중이 아닙니다", - "DNS": "DNS", - "DNS format is incorrect": "DNS 형식이 올바르지 않습니다", - "Danger Zone": "", - "Dark": "어두운 테마", - "Dashboard IP Address \\& Listen Port": "대시보드 IP 주소 & 수신 포트", - "Dashboard Language": "대시보드 언어", - "Dashboard Theme": "대시보드 테마", - "Dashboard language update failed": "대시보드 언어 업데이트 실패", - "Database File": "데이터베이스 파일", - "Date": "날짜", - "Delete": "삭제", - "Delete Configuration": "구성 삭제", - "Delete Peer": "피어 삭제", - "Delete current configuration's database table and \\.conf file": "", - "Deleted ([0-9]{1,}) peer\\(s\\)": "$1 피어가 삭제되었습니다", - "Deleted ([0-9]{1,}) peer\\(s\\) successfully. Failed to delete ([0-9]{1,}) peer\\(s\\)": "$1 피어가 성공적으로 삭제되었습니다. $2 피어 삭제에 실패했습니다", - "Deleting...": "삭제 중...", - "Disabled": "비활성화됨", - "Discord Server": "", - "Display": "표시", - "Display As": "", - "Don't think that's a good idea": "별로 좋은 생각이 아닌 것 같습니다", - "Done": "완료", - "Download": "", - "Download All": "전체 다운로드", - "Download Finished": "다운로드 완료", - "Download \\& QR Code is not available due to no private key set for this peer": "이 피어에 대해 설정된 개인 키가 없기 때문에 다운로드 & QR 코드를 사용할 수 없습니다.", - "Downloading": "다운로드 중", - "Duplicate current configuration's database table and \\.conf file with the new name": "", - "Edit": "수정", - "Edit Raw Configuration File": "", - "Email Account": "", - "Email Body Template": "", - "Email sent successfully!": "", - "Enabled": "활성화됨", - "Encryption": "", - "Endpoint Allowed IPs": "엔드포인트 허용된 IP", - "Endpoint Allowed IPs format is incorrect": "엔드포인트 허용된 IP 형식이 올바르지 않습니다", - "Enter IP Address / Hostname": "IP 주소 / 호스트명 입력", - "Enter IP Address/CIDR": "IP 주소/CIDR 입력", - "Enter a password": "비밀번호 입력", - "Enter an username you like": "원하는 사용자 이름 입력", - "Expire At": "만료일", - "FROM ": "FROM ", - "Failed": "실패", - "Failed to add peers in bulk": "일괄 피어 추가 실패", - "Failed to allow access of peer (.*)": "피어 (.*)의 접근 허용에 실패했습니다", - "Failed to check available update": "사용 가능한 업데이트 확인 실패", - "Failed to save configuration through WireGuard": "WireGuard를 통한 구성 저장에 실패했습니다", - "File": "파일", - "Filter": "필터", - "Generating key pairs by bulk failed": "일괄 키 쌍 생성 실패", - "Geolocation": "위치", - "Grid": "", - "Help": "도움말", - "Home": "홈", - "Hop": "", - "How many peers you want to add\\?": "몇 개의 피어를 추가하시겠습니까?", - "I don't need MFA": "MFA가 필요 없습니다", - "IP Address": "IP 주소", - "IP Address / Hostname": "IP 주소 / 호스트명", - "IP Address/CIDR": "IP 주소/CIDR", - "IP Address/CIDR is invalid": "IP 주소/CIDR이 올바르지 않습니다", - "If you're sure, please type in the configuration name below and click Delete": "확실하다면, 아래에 구성 이름을 입력하고 삭제를 클릭하세요", - "Include configuration file as an attachment": "", - "Invalid Port": "유효하지 않은 포트", - "Is Alive": "활성 상태", - "Job": "작업", - "Job ID": "작업 ID", - "Jobs Logs": "작업 로그", - "Key": "키", - "Language": "언어", - "Light": "밝은 테마", - "Link expire date failed to update. Reason: (.*)": "링크 만료 날짜 업데이트에 실패했습니다. 이유: $1", - "Link expire date updated": "링크 만료 날짜가 업데이트되었습니다", - "List": "", - "Listen Port": "수신 포트", - "Live Preview": "", - "Log ID": "로그 ID", - "Logs": "로그", - "MTU": "MTU", - "MTU format is not correct": "MTU 형식이 올바르지 않습니다", - "Manual restart of WGDashboard is needed to apply changes on IP Address and Listen Port": "IP 주소 및 수신 포트 변경 사항을 적용하려면 WGDashboard를 수동으로 재시작해야 합니다", - "Max RTT \\(ms\\)": "", - "Memory": "", - "Memory Usage": "", - "Message": "메시지", - "Min RTT \\(ms\\)": "", - "Multi-Factor Authentication \\(MFA\\)": "다중 인증 (MFA)", - "Name": "이름", - "Network": "", - "Never Expire": "만료 없음", - "New Configuration": "새 구성", - "New Password": "새 비밀번호", - "Next": "다음", - "Nice to meet you!": "만나서 반가워요!", - "No": "아니오", - "No Encryption": "", - "No WGDashboard API Key": "WGDashboard API 키가 없습니다", - "No active job at the moment\\.": "현재 활성 작업이 없습니다.", - "No available IP containing": "포함된 사용 가능한 IP가 없습니다", - "No backup yet, click the button above to create backup\\.": "아직 백업이 없습니다. 위의 버튼을 클릭하여 백업을 생성하세요.", - "No more available IP can assign": "더 이상 할당 가능한 IP가 없습니다", - "OTP from your authenticator": "인증기에서 생성된 OTP", - "Off": "꺼짐", - "Official Documentation": "", - "Oh no\\.\\.\\. This link is either expired or invalid\\.": "앗... 이 링크는 만료되었거나 잘못되었습니다.", - "On": "켜짐", - "Once you deleted this configuration\\:": "이 구성을 삭제하면:", - "Open File": "", - "Optional Settings": "선택적 설정", - "Or you can click the link below:": "또는 아래 링크를 클릭하세요", - "Other Settings": "기타 설정", + "Welcome to": "환영합니다", + "Username": "사용자 이름", "Password": "비밀번호", - "Peer": "피어", - "Peer Configuration File": "", - "Peer Default Settings": "피어 기본 설정", - "Peer Jobs": "피어 작업", - "Peer Remote Endpoint": "피어 원격 엔드포인트", - "Peer Settings": "피어 설정", - "Peer created successfully": "피어가 성공적으로 생성되었습니다", - "Peer data usage reset successfully": "피어 데이터 사용량이 성공적으로 초기화되었습니다", - "Peer does not exist": "피어가 존재하지 않습니다", - "Peer download started": "피어 다운로드가 시작되었습니다", - "Peer job deleted": "피어 작업이 삭제되었습니다", - "Peer job saved": "피어 작업이 저장되었습니다", - "Peer saved": "피어가 저장되었습니다", - "Peers": "피어들", - "Peers Data Usage": "피어 데이터 사용량", - "Peers Default Settings": "기본 피어 설정", - "Peers Settings": "피어 설정", - "Persistent Keepalive": "Keepalive 지속 유지", - "Persistent Keepalive format is not correct": "지속적 Keepalive 형식이 올바르지 않습니다", - "Pick Available IP": "사용 가능한 IP 선택", - "Pinging...": "핑 테스트 중...", - "Please fill in all required box": "모든 필수 항목을 입력하세요", - "Please fill in the following fields to finish setup": "설정을 완료하려면 아래 필드를 작성하세요", - "Please provide a valid configuration name": "유효한 구성 이름을 입력하세요", - "Please provide ipAddress": "ipAddress를 제공하세요", - "Please provide ipAddress and count": "ipAddress와 개수를 제공하세요", - "Please specify amount of peers you want to add": "추가할 피어의 수를 지정하세요", - "Please specify an IP Address (v4/v6)": "IP 주소 (v4/v6)를 지정하세요", - "Please specify job": "작업을 지정하세요", - "Please specify one or more peers": "하나 이상의 피어를 지정하세요", - "Please specify peer and configuration": "피어와 구성을 지정하세요", - "Port": "", - "Pre-Shared Key": "사전 공유 키", - "Private Key": "개인 키", - "Private key does not match with the public key": "개인 키가 공개 키와 일치하지 않습니다", - "Processes": "", - "Protocol": "", - "Public Key": "공개 키", - "QR Code": "QR 코드", - "Ready": "", - "Real Time Received Data Usage": "실시간 수신 데이터 사용량", - "Real Time Sent Data Usage": "실시간 송신 데이터 사용량", - "Received": "수신됨", - "Refresh": "새로고침", - "Refresh Interval": "새로고침 간격", - "Remember to remove / at the end of your path. e.g /etc/wireguard": "경로 끝의 '/'를 제거하세요. 예: /etc/wireguard", - "Repeat New Password": "새 비밀번호 확인", - "Reset": "재설정", - "Reset Data Usage": "데이터 사용량 초기화", - "Restore": "복원", - "Restore Configuration": "구성 복원", - "Restoring": "복원 중...", - "Restrict Access": "접근 제한", - "Restrict Peer": "피어 제한", - "Restricted": "제한됨", - "Restricted ([0-9]{1,}) peer\\(s\\)": "$1 피어가 제한되었습니다", - "Restricted ([0-9]{1,}) peer\\(s\\) successfully. Failed to restrict ([0-9]{1,}) peer\\(s\\)": "$1 피어가 성공적으로 제한되었습니다. $2 피어 제한에 실패했습니다", - "Restricted Peers?": "제한된 피어?", - "Restricting\\.\\.\\.": "제한 중...", - "Revert": "되돌리기", - "Save": "저장", - "Save Configuration": "구성 저장", - "Save Peer": "피어 저장", - "Saving\\.\\.\\.": "저장 중...", - "Scan QR Code with the WireGuard App to add peer": "WireGuard 앱으로 QR 코드를 스캔하여 피어를 추가하세요", - "Schedule Jobs": "작업 예약", - "Search": "", - "Search Peers\\.\\.\\.": "피어 검색...", - "Select All": "전체 선택", - "Select Peers": "피어 선택", - "Select a backup you want to restore": "복원할 백업을 선택하세요", - "Selected Backup": "선택된 백업", - "Send": "", - "Send From": "", - "Send Test Email": "", - "Sending\\.\\.\\.": "", - "Sent": "전송됨", - "Sent / Received / Lost Package": "전송 / 수신 / 손실 패킷", - "Server": "서버", - "Server List": "서버 목록", - "Settings": "설정", - "Setup": "설정", - "Share Peer": "피어 공유", - "Share link failed to create. Reason: (.*)": "공유 링크 생성에 실패했습니다. 이유: $1", - "Share with Email": "", - "Sharing\\.\\.\\.": "공유 중...", + "OTP from your authenticator": "인증기에서 생성된 OTP", "Sign In": "로그인", - "Sign Out": "로그아웃", - "Sign in session ended, please sign in again": "로그인 세션이 종료되었습니다. 다시 로그인해주세요", "Signing In\\.\\.\\.": "로그인하는 중...", + "Access Remote Server": "원격 서버 접속", + "Server": "서버", + "Click": "클릭", + "Pinging...": "핑 테스트 중...", + "to add your server": "서버를 추가하려면", + "Server List": "서버 목록", "Sorry, your username or password is incorrect.": "죄송합니다. 사용자 이름 또는 비밀번호가 올바르지 않습니다.", - "Sort By": "정렬 기준", - "Start Sharing": "공유 시작", - "Status": "상태", - "Step (.*)": "단계 $1", - "Stop Sharing": "공유 중지", - "Stop Sharing\\.\\.\\.": "공유 중지 중...", - "Storage": "", - "Success": "성공", - "Swap Memory": "", - "Swap Memory Usage": "", - "System Status": "", - "TOTP verified!": "TOTP가 확인되었습니다!", - "Table": "", - "The maximum number of peers can add is (.*)": "추가할 수 있는 피어의 최대 수는 $1 개입니다", - "Theme": "테마", - "This IP is not available: (.*)": "이 IP는 사용할 수 없습니다: $1", - "This configuration have ([0-9].*) backups": "이 구성에는 $1 개의 백업이 있습니다", - "This configuration have no backup": "이 구성에는 백업이 없습니다", - "This peer already exist": "이 피어는 이미 존재합니다", - "This peer does not have any job yet\\.": "이 피어에는 아직 작업이 없습니다.", - "This will be changed globally, and will be apply to all peer's QR code and configuration file.": "이 설정은 전역적으로 변경되며, 모든 피어의 QR 코드 및 구성 파일에 적용됩니다.", - "To update this configuration's name, WGDashboard will execute the following operations:": "", - "Toggle When Start Up": "시작 시 실행", + "Home": "홈", + "Settings": "설정", "Tools": "도구", - "Total": "총합", + "Sign Out": "로그아웃", + "Checking for update...": "업데이트 확인 중...", + "You're on the latest version": "최신 버전을 사용 중입니다", + "WireGuard Configurations": "WireGuard 구성", + "You don't have any WireGuard configurations yet. Please check the configuration folder or change it in Settings. By default the folder is /etc/wireguard.": "아직 WireGuard 구성이 없습니다. 구성 폴더를 확인하거나 설정에서 변경하세요. 기본 폴더는 /etc/wireguard 입니다.", + "Configuration": "구성", + "Configurations": "구성들", + "Peers Default Settings": "기본 피어 설정", + "Dashboard Theme": "대시보드 테마", + "Light": "밝은 테마", + "Dark": "어두운 테마", + "This will be changed globally, and will be apply to all peer's QR code and configuration file.": "이 설정은 전역적으로 변경되며, 모든 피어의 QR 코드 및 구성 파일에 적용됩니다.", + "WireGuard Configurations Settings": "WireGuard 구성 설정", + "Configurations Directory": "구성 디렉토리", + "Remember to remove / at the end of your path. e.g /etc/wireguard": "경로 끝의 '/'를 제거하세요. 예: /etc/wireguard", + "WGDashboard Account Settings": "WGDashboard 계정 설정", + "Current Password": "현재 비밀번호", + "New Password": "새 비밀번호", + "Repeat New Password": "새 비밀번호 확인", + "Update Password": "비밀번호 변경", + "Multi-Factor Authentication \\(MFA\\)": "다중 인증 (MFA)", + "Reset": "재설정", + "Setup": "설정", + "API Keys": "API 키", + "API Key": "API 키", + "Key": "키", + "Enabled": "활성화됨", + "Disabled": "비활성화됨", + "No WGDashboard API Key": "WGDashboard API 키가 없습니다", + "Expire At": "만료일", + "Are you sure to delete this API key\\?": "이 API 키를 삭제하시겠습니까?", + "Create API Key": "API 키 생성", + "When should this API Key expire\\?": "이 API 키는 언제 만료되나요?", + "Never Expire": "만료 없음", + "Don't think that's a good idea": "별로 좋은 생각이 아닌 것 같습니다", + "Creating\\.\\.\\.": "생성 중...", + "Create": "생성", + "Status": "상태", + "On": "켜짐", + "Off": "꺼짐", + "Turning On\\.\\.\\.": "켜는 중...", + "Turning Off\\.\\.\\.": "끄는 중...", + "Address": "주소", + "Listen Port": "수신 포트", + "Public Key": "공개 키", + "Connected Peers": "연결된 피어", + "Total Usage": "총 사용량", "Total Received": "총 수신량", "Total Sent": "총 송신량", - "Total Usage": "총 사용량", - "Turning Off\\.\\.\\.": "끄는 중...", - "Turning On\\.\\.\\.": "켜는 중...", - "Unsaved Job": "저장되지 않은 작업", - "Untitled Peer": "", - "Update Name": "", - "Update Password": "비밀번호 변경", - "Update peer failed when saving the configuration": "구성 저장 중 피어 업데이트 실패", - "Update peer failed when updating Allowed IPs": "허용된 IP 업데이트 중 피어 업데이트 실패", - "Update peer failed when updating Pre-Shared Key": "사전 공유 키 업데이트 중 피어 업데이트 실패", - "Updated at": "업데이트된 날짜", - "Use your own Private and Public Key": "자체 개인 및 공개 키 사용", - "Username": "사용자 이름", - "WGDashboard API Keys function is disabled": "WGDashboard API 키 기능이 비활성화되었습니다", - "WGDashboard Account Settings": "WGDashboard 계정 설정", - "WGDashboard Settings": "WGDashboard 설정", - "WGDashboard language update failed": "WGDashboard 언어 업데이트 실패", - "Welcome to": "환영합니다", - "What\\'s the body\\?": "", - "What\\'s the subject\\?": "", - "When should this API Key expire\\?": "이 API 키는 언제 만료되나요?", - "Who are you sending to\\?": "", - "WireGuard Configuration Settings": "WireGuard 구성 설정", - "WireGuard Configurations": "WireGuard 구성", - "WireGuard Configurations Settings": "WireGuard 구성 설정", - "WireGuard configuration path saved": "WireGuard 구성 경로가 저장되었습니다", - "Yes": "예", - "You can add up to (.*) peers": "$1 개의 피어까지 추가할 수 있습니다", - "You can visit our: ": "", - "You don't have any WireGuard configurations yet. Please check the configuration folder or change it in Settings. By default the folder is /etc/wireguard.": "아직 WireGuard 구성이 없습니다. 구성 폴더를 확인하거나 설정에서 변경하세요. 기본 폴더는 /etc/wireguard 입니다.", - "You don't have any configuration to restore": "복원할 구성이 없습니다", - "You're on the latest version": "최신 버전을 사용 중입니다", - "\\(At least 8 characters and make sure is strong enough!\\)": "(최소 8자 이상이고 강력한 비밀번호여야 합니다!)", + "Peers Data Usage": "피어 데이터 사용량", + "Real Time Received Data Usage": "실시간 수신 데이터 사용량", + "Real Time Sent Data Usage": "실시간 송신 데이터 사용량", + "Peer": "피어", + "Peers": "피어들", + "Peer Settings": "피어 설정", + "Download All": "전체 다운로드", + "Search Peers\\.\\.\\.": "피어 검색...", + "Display": "표시", + "Sort By": "정렬 기준", + "Refresh Interval": "새로고침 간격", + "Name": "이름", + "Allowed IPs": "허용된 IP", + "Restricted": "제한됨", + "(.*) Seconds": "$1 초", + "(.*) Minutes": "$1 분", + "Configuration Settings": "구성 설정", + "Peer Jobs": "피어 작업", + "Active Jobs": "활성 작업", + "All Active Jobs": "모든 활성 작업", + "Logs": "로그", + "Private Key": "개인 키", "\\(Required for QR Code and Download\\)": "(QR 코드 및 다운로드에 필요)", "\\(Required\\)": "(필수)", + "Endpoint Allowed IPs": "엔드포인트 허용된 IP", + "DNS": "DNS", + "Optional Settings": "선택적 설정", + "Pre-Shared Key": "사전 공유 키", + "MTU": "MTU", + "Persistent Keepalive": "Keepalive 지속 유지", + "Reset Data Usage": "데이터 사용량 초기화", + "Total": "총합", + "Sent": "전송됨", + "Received": "수신됨", + "Revert": "되돌리기", + "Save Peer": "피어 저장", + "QR Code": "QR 코드", + "Schedule Jobs": "작업 예약", + "Job": "작업", + "Job ID": "작업 ID", + "Unsaved Job": "저장되지 않은 작업", + "This peer does not have any job yet\\.": "이 피어에는 아직 작업이 없습니다.", "if": "만약", "is": "이다", - "larger than": "보다 큼", - "or": "또는", - "or click the button below to download the ": "또는 아래 버튼을 클릭하여 다운로드하세요 ", "then": "그러면", - "to add your server": "서버를 추가하려면" + "larger than": "보다 큼", + "Date": "날짜", + "Restrict Peer": "피어 제한", + "Delete Peer": "피어 삭제", + "Edit": "수정", + "Delete": "삭제", + "Deleting...": "삭제 중...", + "Cancel": "취소", + "Save": "저장", + "No active job at the moment\\.": "현재 활성 작업이 없습니다.", + "Jobs Logs": "작업 로그", + "Updated at": "업데이트된 날짜", + "Refresh": "새로고침", + "Filter": "필터", + "Success": "성공", + "Failed": "실패", + "Log ID": "로그 ID", + "Message": "메시지", + "Share Peer": "피어 공유", + "Currently the peer is not sharing": "현재 이 피어는 공유 중이 아닙니다", + "Sharing\\.\\.\\.": "공유 중...", + "Stop Sharing\\.\\.\\.": "공유 중지 중...", + "Start Sharing": "공유 시작", + "Stop Sharing": "공유 중지", + "Access Restricted": "접근 제한됨", + "Restrict Access": "접근 제한", + "Restricting\\.\\.\\.": "제한 중...", + "Allow Access": "접근 허용", + "Allowing Access\\.\\.\\.": "접근 허용 중...", + "Download \\& QR Code is not available due to no private key set for this peer": "이 피어에 대해 설정된 개인 키가 없기 때문에 다운로드 & QR 코드를 사용할 수 없습니다.", + "By adding peers by bulk, each peer's name will be auto generated, and Allowed IP will be assign to the next available IP\\.": "피어를 일괄로 추가하면 각 피어의 이름이 자동으로 생성되고 허용된 IP는 사용 가능한 다음 IP에 할당됩니다.", + "Add Peers": "피어 추가", + "Bulk Add": "일괄 추가", + "How many peers you want to add\\?": "몇 개의 피어를 추가하시겠습니까?", + "You can add up to (.*) peers": "$1 개의 피어까지 추가할 수 있습니다", + "Use your own Private and Public Key": "자체 개인 및 공개 키 사용", + "Enter IP Address/CIDR": "IP 주소/CIDR 입력", + "IP Address/CIDR": "IP 주소/CIDR", + "or": "또는", + "Pick Available IP": "사용 가능한 IP 선택", + "No available IP containing": "포함된 사용 가능한 IP가 없습니다", + "Add": "추가", + "Adding\\.\\.\\.": "추가 중...", + "Failed to check available update": "사용 가능한 업데이트 확인 실패", + "Nice to meet you!": "만나서 반가워요!", + "Please fill in the following fields to finish setup": "설정을 완료하려면 아래 필드를 작성하세요", + "Create an account": "계정 생성", + "Enter an username you like": "원하는 사용자 이름 입력", + "Enter a password": "비밀번호 입력", + "\\(At least 8 characters and make sure is strong enough!\\)": "(최소 8자 이상이고 강력한 비밀번호여야 합니다!)", + "Confirm password": "비밀번호 확인", + "Next": "다음", + "Saving\\.\\.\\.": "저장 중...", + "1\\. Please scan the following QR Code to generate TOTP with your choice of authenticator": "1. 다음 QR 코드를 스캔하여 선택한 인증기로 TOTP를 생성하세요", + "Or you can click the link below:": "또는 아래 링크를 클릭하세요", + "2\\. Enter the TOTP generated by your authenticator to verify": "2. 인증기에서 생성된 TOTP를 입력하여 확인하세요", + "TOTP verified!": "TOTP가 확인되었습니다!", + "I don't need MFA": "MFA가 필요 없습니다", + "Complete": "완료", + "(v[0-9.]{1,}) is now available for update!": "$1 업데이트가 가능합니다!", + "Current Version:": "현재 버전:", + "Oh no\\.\\.\\. This link is either expired or invalid\\.": "앗... 이 링크는 만료되었거나 잘못되었습니다.", + "Scan QR Code with the WireGuard App to add peer": "WireGuard 앱으로 QR 코드를 스캔하여 피어를 추가하세요", + "or click the button below to download the ": "또는 아래 버튼을 클릭하여 다운로드하세요 ", + " file": " 파일", + "FROM ": "FROM ", + "(.*) is on": "$1 켜짐", + "(.*) is off": "$1 꺼짐", + "Allowed IPs is invalid": "허용된 IP가 올바르지 않습니다", + "Peer created successfully": "피어가 성공적으로 생성되었습니다", + "Please fill in all required box": "모든 필수 항목을 입력하세요", + "Please specify amount of peers you want to add": "추가할 피어의 수를 지정하세요", + "No more available IP can assign": "더 이상 할당 가능한 IP가 없습니다", + "The maximum number of peers can add is (.*)": "추가할 수 있는 피어의 최대 수는 $1 개입니다", + "Generating key pairs by bulk failed": "일괄 키 쌍 생성 실패", + "Failed to add peers in bulk": "일괄 피어 추가 실패", + "This peer already exist": "이 피어는 이미 존재합니다", + "This IP is not available: (.*)": "이 IP는 사용할 수 없습니다: $1", + "Configuration does not exist": "구성이 존재하지 않습니다", + "Peer does not exist": "피어가 존재하지 않습니다", + "Please provide a valid configuration name": "유효한 구성 이름을 입력하세요", + "Peer saved": "피어가 저장되었습니다", + "Allowed IPs already taken by another peer": "허용된 IP가 다른 피어에 의해 이미 사용 중입니다", + "Endpoint Allowed IPs format is incorrect": "엔드포인트 허용된 IP 형식이 올바르지 않습니다", + "DNS format is incorrect": "DNS 형식이 올바르지 않습니다", + "MTU format is not correct": "MTU 형식이 올바르지 않습니다", + "Persistent Keepalive format is not correct": "지속적 Keepalive 형식이 올바르지 않습니다", + "Private key does not match with the public key": "개인 키가 공개 키와 일치하지 않습니다", + "Update peer failed when updating Pre-Shared Key": "사전 공유 키 업데이트 중 피어 업데이트 실패", + "Update peer failed when updating Allowed IPs": "허용된 IP 업데이트 중 피어 업데이트 실패", + "Update peer failed when saving the configuration": "구성 저장 중 피어 업데이트 실패", + "Peer data usage reset successfully": "피어 데이터 사용량이 성공적으로 초기화되었습니다", + "Peer download started": "피어 다운로드가 시작되었습니다", + "Please specify one or more peers": "하나 이상의 피어를 지정하세요", + "Share link failed to create. Reason: (.*)": "공유 링크 생성에 실패했습니다. 이유: $1", + "Link expire date updated": "링크 만료 날짜가 업데이트되었습니다", + "Link expire date failed to update. Reason: (.*)": "링크 만료 날짜 업데이트에 실패했습니다. 이유: $1", + "Peer job saved": "피어 작업이 저장되었습니다", + "Please specify job": "작업을 지정하세요", + "Please specify peer and configuration": "피어와 구성을 지정하세요", + "Peer job deleted": "피어 작업이 삭제되었습니다", + "API Keys function is successfully enabled": "API 키 기능이 성공적으로 활성화되었습니다", + "API Keys function is successfully disabled": "API 키 기능이 성공적으로 비활성화되었습니다", + "API Keys function is failed to enable": "API 키 기능 활성화에 실패했습니다", + "API Keys function is failed to disable": "API 키 기능 비활성화에 실패했습니다", + "WGDashboard API Keys function is disabled": "WGDashboard API 키 기능이 비활성화되었습니다", + "WireGuard configuration path saved": "WireGuard 구성 경로가 저장되었습니다", + "API Key deleted": "API 키가 삭제되었습니다", + "API Key created": "API 키가 생성되었습니다", + "Sign in session ended, please sign in again": "로그인 세션이 종료되었습니다. 다시 로그인해주세요", + "Please specify an IP Address (v4/v6)": "IP 주소 (v4/v6)를 지정하세요", + "Please provide ipAddress and count": "ipAddress와 개수를 제공하세요", + "Please provide ipAddress": "ipAddress를 제공하세요", + "Dashboard Language": "대시보드 언어", + "Dashboard language update failed": "대시보드 언어 업데이트 실패", + "Peer Remote Endpoint": "피어 원격 엔드포인트", + "New Configuration": "새 구성", + "Configuration Name": "구성 이름", + "Configuration name is invalid. Possible reasons:": "구성 이름이 올바르지 않습니다. 가능한 원인:", + "Configuration name already exist\\.": "구성 이름이 이미 존재합니다.", + "Configuration name can only contain 15 lower/uppercase alphabet, numbers, underscore, equal sign, plus sign, period and hyphen\\.": "구성 이름은 15자 이하의 소문자/대문자 알파벳, 숫자, 밑줄, 등호, 더하기 기호, 마침표 및 하이픈만 포함할 수 있습니다.", + "Invalid Port": "유효하지 않은 포트", + "Save Configuration": "구성 저장", + "IP Address/CIDR is invalid": "IP 주소/CIDR이 올바르지 않습니다", + "IP Address": "IP 주소", + "Enter IP Address / Hostname": "IP 주소 / 호스트명 입력", + "IP Address / Hostname": "IP 주소 / 호스트명", + "Dashboard IP Address \\& Listen Port": "대시보드 IP 주소 & 수신 포트", + "Count": "개수", + "Geolocation": "위치", + "Is Alive": "활성 상태", + "Average / Min / Max Round Trip Time": "평균 / 최소 / 최대 왕복 시간", + "Sent / Received / Lost Package": "전송 / 수신 / 손실 패킷", + "Manual restart of WGDashboard is needed to apply changes on IP Address and Listen Port": "IP 주소 및 수신 포트 변경 사항을 적용하려면 WGDashboard를 수동으로 재시작해야 합니다", + "Restore Configuration": "구성 복원", + "Step (.*)": "단계 $1", + "Select a backup you want to restore": "복원할 백업을 선택하세요", + "Click to change a backup": "백업을 변경하려면 클릭하세요", + "Selected Backup": "선택된 백업", + "You don't have any configuration to restore": "복원할 구성이 없습니다", + "Help": "도움말", + "Backup": "백업", + "([0-9].*) Backups?": "$1 백업", + "Yes": "예", + "No": "아니오", + "Backup not selected": "백업이 선택되지 않았습니다", + "Confirm \\& edit restore information": "복원 정보 확인 & 편집", + "(.*) Available IP Address": "$1 사용 가능한 IP 주소", + "Database File": "데이터베이스 파일", + "Contain": "포함", + "Restricted Peers?": "제한된 피어?", + "Restore": "복원", + "Restoring": "복원 중...", + "WGDashboard Settings": "WGDashboard 설정", + "Peers Settings": "피어 설정", + "WireGuard Configuration Settings": "WireGuard 구성 설정", + "Appearance": "외관", + "Theme": "테마", + "Language": "언어", + "Account Settings": "계정 설정", + "Peer Default Settings": "피어 기본 설정", + "Toggle When Start Up": "시작 시 실행", + "Other Settings": "기타 설정", + "Select Peers": "피어 선택", + "Backup & Restore": "백업 & 복원", + "Delete Configuration": "구성 삭제", + "Create Backup": "백업 생성", + "No backup yet, click the button above to create backup\\.": "아직 백업이 없습니다. 위의 버튼을 클릭하여 백업을 생성하세요.", + "Are you sure to delete this backup\\?": "이 백업을 삭제하시겠습니까?", + "Backup Date": "백업 날짜", + "File": "파일", + "Are you sure to delete this configuration\\?": "이 구성을 삭제하시겠습니까?", + "Once you deleted this configuration\\:": "이 구성을 삭제하면:", + "All connected peers will get disconnected": "연결된 모든 피어의 연결이 끊깁니다", + "Both configuration file \\(\\.conf\\) and database table related to this configuration will get deleted": "이 구성과 관련된 구성 파일 (.conf) 및 데이터베이스 테이블이 삭제됩니다", + "Checking backups...": "백업 확인 중...", + "This configuration have ([0-9].*) backups": "이 구성에는 $1 개의 백업이 있습니다", + "This configuration have no backup": "이 구성에는 백업이 없습니다", + "If you're sure, please type in the configuration name below and click Delete": "확실하다면, 아래에 구성 이름을 입력하고 삭제를 클릭하세요", + "Select All": "전체 선택", + "Clear Selection": "선택 해제", + "([0-9].*) Peers?": "$1 피어", + "Downloading": "다운로드 중", + "Download Finished": "다운로드 완료", + "Done": "완료", + "Are you sure to delete": "정말로 삭제하시겠습니까", + "Are you sure to delete this peer\\?": "정말로 이 피어를 삭제하시겠습니까", + "Configuration deleted": "구성이 삭제되었습니다", + "Configuration saved": "구성이 저장되었습니다", + "WGDashboard language update failed": "WGDashboard 언어 업데이트 실패", + "Configuration restored": "구성이 복원되었습니다", + "Allowed IP already taken by another peer": "허용된 IP가 다른 피어에 의해 이미 사용 중입니다", + "Failed to allow access of peer (.*)": "피어 (.*)의 접근 허용에 실패했습니다", + "Failed to save configuration through WireGuard": "WireGuard를 통한 구성 저장에 실패했습니다", + "Allow access successfully": "접근 허용에 성공했습니다", + "Deleted ([0-9]{1,}) peer\\(s\\)": "$1 피어가 삭제되었습니다", + "Deleted ([0-9]{1,}) peer\\(s\\) successfully. Failed to delete ([0-9]{1,}) peer\\(s\\)": "$1 피어가 성공적으로 삭제되었습니다. $2 피어 삭제에 실패했습니다", + "Restricted ([0-9]{1,}) peer\\(s\\)": "$1 피어가 제한되었습니다", + "Restricted ([0-9]{1,}) peer\\(s\\) successfully. Failed to restrict ([0-9]{1,}) peer\\(s\\)": "$1 피어가 성공적으로 제한되었습니다. $2 피어 제한에 실패했습니다", + "Table": "라우팅 테이블", + "Search": "검색", + "Hop": "홉", + "Average RTT \\(ms\\)": "평균 RTT (ms)", + "Min RTT \\(ms\\)": "최소 RTT (ms)", + "Max RTT \\(ms\\)": "최대 RTT (ms)", + "You can visit our: ": "다음 링크를 방문할 수 있습니다: ", + "Official Documentation": "공식 문서", + "Discord Server": "디스코드 서버", + "Are you sure to restore this backup\\?": "이 백업을 복원하시겠습니까?", + "Download": "다운로드", + "Display As": "표시 방식", + "List": "목록", + "Grid": "그리드", + "Protocol": "프로토콜", + "Open File": "파일 열기", + "Advanced Options": "고급 옵션", + "Allowed IPs Validation": "허용된 IP 유효성 검사", + "Update Name": "이름 변경", + "To update this configuration's name, WGDashboard will execute the following operations:": "이 구성의 이름을 변경하기 위해, WGDashboard는 다음 작업을 수행합니다.", + "Duplicate current configuration's database table and \\.conf file with the new name": "현재 구성의 데이터베이스 테이블과 .conf 파일을 새 이름으로 복제합니다.", + "Delete current configuration's database table and \\.conf file": "현재 구성의 데이터베이스 테이블과 .conf 파일을 삭제합니다.", + "Danger Zone": "위험 구역", + "Configuration File": "구성 파일", + "Edit Raw Configuration File": "원시 구성 파일 편집", + "Peer Configuration File": "피어 구성 파일", + "Share with Email": "이메일로 공유", + "Email Account": "이메일 계정", + "Ready": "준비됨", + "Port": "포트", + "Encryption": "암호화", + "No Encryption": "암호화 안 함", + "Send From": "보내는 사람", + "Send Test Email": "테스트 이메일 보내기", + "Email Body Template": "이메일 본문 템플릿", + "Live Preview": "실시간 미리보기", + "Include configuration file as an attachment": "구성 파일을 첨부파일로 포함", + "Send": "보내기", + "Sending\\.\\.\\.": "전송 중...", + "Email sent successfully!": "이메일이 성공적으로 전송되었습니다!", + "AmneziaWG Peer Setting": "AmneziaWG 피어 설정", + "System Status": "시스템 상태", + "CPU": "CPU", + "Memory": "메모리", + "Swap Memory": "스왑 메모리", + "Processes": "프로세스", + "CPU Usage": "CPU 사용량", + "Memory Usage": "메모리 사용량", + "Swap Memory Usage": "스왑 메모리 사용량", + "Network": "네트워크", + "([0-9]{1,}) Interfaces": "$1 인터페이스", + "Storage": "스토리지", + "([0-9]{1,}) Partitions": "$1 파티션", + "(.*) Used": "$1 사용됨", + "Untitled Peer": "제목 없는 피어", + "Who are you sending to\\?": "누구에게 보내시겠습니까?", + "What\\'s the subject\\?": "제목이 무엇입니까?", + "What\\'s the body\\?": "본문이 무엇입니까?" } \ No newline at end of file