{ " file": " 文件", "(.*) Available IP Address": "$1个可用的 IP 地址", "(.*) Minutes": "$1 分钟", "(.*) Seconds": "$1 秒", "(.*) Used": "已使用 $1", "(.*) in group (.*)\\?": "在 $2 用户组的 $1", "(.*) is off": "$1 已停用", "(.*) is on": "$1 已启用", "([0-9].*) Backups?": "$1个备份", "([0-9].*) Clients*": "$1位用户", "([0-9].*) Peers?": "$1 个端点", "([0-9]{1,}) Interfaces": "$1 个网络接口", "([0-9]{1,}) Partitions": "$1 个分区", "(v[0-9.]{1,}) is now available for update!": "有新版本 $1 可更新！", "1\\. Please scan the following QR Code to generate TOTP with your choice of authenticator": "1. 请使用您选择的验证器扫描以下二维码来生成一次性验证码", "2\\. Enter the TOTP generated by your authenticator to verify": "2. 请输入验证器生成的一次性验证码进行验证", "API Key": "API 秘钥", "API Key created": "API 秘钥创建成功", "API Key deleted": "API 秘钥删除成功", "API Keys": "API 秘钥", "API Keys function is failed to disable": "API 秘钥功能停用失败", "API Keys function is failed to enable": "API 秘钥功能开启失败", "API Keys function is successfully disabled": "API 秘钥功能停用成功", "API Keys function is successfully enabled": "API 秘钥功能开启成功", "Access Remote Server": "访问远程服务器", "Access Restricted": "已限制访问", "Account Settings": "账户设定", "Active Jobs": "未运行任务", "Add": "创建", "Add Peers": "创建端点", "Add Template": "添加模板", "Add Webhook": "添加网络钩子", "Adding\\.\\.\\.": "创建中...", "Address": "网络地址", "Advanced Options": "高级选项", "All": "全部", "All Active Jobs": "所有未运行任务", "All connected peers will get disconnected": "所有已连接的端点会断开", "Allow Access": "解除限制访问", "Allow access successfully": "解除限制访问成功", "Allowed IP already taken by another peer": "允许的 IP 地址已经被别的端点占用", "Allowed IPs": "允许的 IP 地址", "Allowed IPs Validation": "验证允许的 IP 地址", "Allowed IPs already taken by another peer": "允许的 IP 地址已被其他端点使用", "Allowed IPs is invalid": "允许的 IP 地址错误", "Allowing Access\\.\\.\\.": "解除限制访问中...", "AmneziaWG Peer Setting": "AmneziaWG 端点设置", "Appearance": "外观", "Are you sure to delete": "您确定要删除", "Are you sure to delete assignment for": "您确定要移除以下用户的分配吗？", "Are you sure to delete this API key\\?": "确定删除此 API 秘钥？", "Are you sure to delete this backup\\?": "您确定要删除此备份吗？", "Are you sure to delete this client\\?": "您确定要删除此用户吗？", "Are you sure to delete this configuration\\?": "您确定要删除此配置吗？", "Are you sure to delete this peer\\?": "您确定要删除此端点吗？", "Are you sure to restore this backup\\?": "您确定要恢复此备份吗？", "Assign Peer": "分配端点", "Assign Peer to Client": "给用户分配端点", "Assign successfully!": "分配成功！", "Assign to Clients": "分配给用户", "Assigned Clients": "已分配用户", "Assigned Peers": "已分配端点", "Available Peers": "可分配端点", "Average / Min / Max Round Trip Time": "平均 / 最低 / 最高来回通讯延迟", "Average RTT \\(ms\\)": "平均来回时间（微秒）", "Back": "返回", "Backup": "备份", "Backup & Restore": "备份及恢复", "Backup Date": "备份日期", "Backup not selected": "没有选择备份", "Both configuration file \\(\\.conf\\) and database table related to this configuration will get deleted": "配置文件 (.conf) 以及相关的数据库文件会被删除", "Bulk Add": "批量添加", "By adding peers by bulk, each peer's name will be auto generated, and Allowed IP will be assign to the next available IP\\.": "如果选择批量添加端点，系统会自动生成每一个端点的名称，并且会自动安排可用的 IP 地址。", "CPU": "中央处理器", "CPU Usage": "中央处理器用量", "Cancel": "取消", "Checking backups...": "检查备份中...", "Checking for update...": "正在检查是否有新版本...", "Clear Selection": "清除选择", "Click": "点击", "Click to change a backup": "点击更换备份", "Client ID": "用户ID", "Client Name": "用户名字", "Client Side App": "用户平台", "Clients": "用户", "Clients Settings": "用户设定", "Close": "关闭", "Complete": "完成", "Configuration": "配置", "Configuration File": "配置文件", "Configuration Name": "配置名称", "Configuration Settings": "配置设定", "Configuration deleted": "配置删除成功", "Configuration does not exist": "此配置不存在", "Configuration name already exist\\.": "配置名称已存在。", "Configuration name can only contain 15 lower/uppercase alphabet, numbers, underscore, equal sign, plus sign, period and hyphen\\.": "配置名称只能含有15个小/大写英文字母，数字，下划线，等于号，加号，小数点或短横线。", "Configuration name is invalid. Possible reasons:": "配置名称不正确。可能的原因：", "Configuration restored": "配置恢复成功", "Configuration saved": "配置保存成功", "Configurations": "配置", "Configurations Directory": "配置文件路径", "Confirm \\& edit restore information": "确认和编辑备份信息", "Confirm password": "确认密码", "Connected": "已连接", "Connected Peers": "已连接端点", "Contain": "含有", "Content Type": "内容格式", "Count": "数量", "Create": "创建", "Create API Key": "创建 API 秘钥", "Create Backup": "创建备份", "Create an account": "创建账户", "Create templates to keep track a list of available Subnets \\& Listen Ports\n": "创建模板以计算出可用的子网地址以及监听端口", "Creating\\.\\.\\.": "创建中...", "Current Password": "当前密码", "Current Version:": "当前版本: ", "Currently the peer is not sharing": "此端点未被共享", "Custom Headers": "自定义请求标头", "DNS": "域名系统（DNS）", "DNS format is incorrect": "域名系统（DNS）格式不正确", "Danger Zone": "危险区域", "Dark": "简约黑", "Dashboard IP Address \\& Listen Port": "面板 IP地址 & 监听端口", "Dashboard Language": "面板语言", "Dashboard Theme": "面板主题", "Dashboard language update failed": "面板语言更新失败", "Data": "数据", "Database File": "数据库文件", "Date": "日期", "Datetime": "日期时间", "Delete": "删除", "Delete Client": "删除用户", "Delete Configuration": "删除配置", "Delete Peer": "删除端点", "Delete current configuration's database table and \\.conf file": "删除当前配置的数据库表以及.conf文件", "Deleted ([0-9]{1,}) peer\\(s\\)": "删除了$1个端点", "Deleted ([0-9]{1,}) peer\\(s\\) successfully. Failed to delete ([0-9]{1,}) peer\\(s\\)": "成功删除了$1个端点，失败删除了$2个端点", "Deleting...": "删除中...", "Details": "详情", "Disabled": "已停用", "Disconnected": "已断开", "Discord Server": "Discord 服务器", "Display": "显示设置", "Display As": "显示为", "Don't think that's a good idea": "我不觉得这是一个好主意", "Done": "完成", "Download": "下载", "Download All": "全部下载", "Download Finished": "下载完成", "Download \\& QR Code is not available due to no private key set for this peer": "下载以及二维码功能不可用，需要填写此端点的秘钥", "Downloading": "正在下载", "Duplicate current configuration's database table and \\.conf file with the new name": "使用新名称克隆当前配置的数据库表以及.conf文件", "Duration:": "时长", "Edit": "编辑", "Edit Raw Configuration File": "编辑配置源文件", "Email": "邮箱", "Email Account": "邮箱账号", "Email Body Template": "邮件正文模板", "Email sent successfully!": "邮件发送成功！", "Enable Webhook": "启用网络钩子", "Enabled": "已启用", "Encryption": "加密方式", "Ended At": "结束于", "Endpoint Allowed IPs": "终结点允许的 IP 地址", "Endpoint Allowed IPs format is incorrect": "终结点允许的 IP 地址格式不正确", "Enter Email or Name to Search": "输入邮箱地址或用户名字来搜索", "Enter IP Address / Hostname": "输入 IP 地址 / 域名", "Enter IP Address/CIDR": "输入 IP 地址/前缀长度", "Enter a password": "输入密码", "Enter an username you like": "输入一个您喜欢的用户名", "Expire At": "过期于", "FROM ": "来自 ", "Failed": "失败", "Failed to add peers in bulk": "批量创建端点失败", "Failed to allow access of peer (.*)": "此端点解除限制访问失败：$1", "Failed to check available update": "获取更新失败", "Failed to save configuration through WireGuard": "使用 WireGuard 保存配置失败", "File": "文件", "Filter": "筛选", "Generating key pairs by bulk failed": "生成公钥秘钥失败了", "Geolocation": "地理位置", "Grid": "网格", "Groups": "用户组", "Header": "请求标头", "Help": "帮助", "Home": "主页", "Hop": "跳数", "How many peers you want to add\\?": "您想添加多少个端点？", "I don't need MFA": "我不需要多重身份验证 (MFA)", "IP Address": "IP 地址", "IP Address / Hostname": "IP 地址 / 域名", "IP Address/CIDR": "IP 地址/前缀长度", "IP Address/CIDR is invalid": "IP 地址/前缀长度格式错误", "If you're sure, please type in the configuration name below and click Delete": "如果您确定，请在下方输入此配置的名称并点击删除", "Include configuration file as an attachment": "添加配置文件为附件", "Invalid Port": "错误的端口", "Is Alive": "在线", "Job": "任务", "Job ID": "任务 ID", "Jobs Logs": "任务日志", "Key": "秘钥", "Language": "语言", "Latest Handshake Time": "最新握手时间", "Latest Session": "最新活动", "Light": "简约白", "Link expire date failed to update. Reason: (.*)": "分享链接过期时间更新失败。原因：$1", "Link expire date updated": "分享链接过期时间更新成功", "List": "列表", "Listen Port": "监听端口", "Live Preview": "实时预览", "Local": "本地", "Log ID": "任务 ID", "Logs": "日志", "MTU": "最大传输单元", "MTU format is not correct": "最大传输单元格式不正确", "Manage": "管理", "Manual restart of WGDashboard is needed to apply changes on IP Address and Listen Port": "更改 IP 地址或监听端口后需要手动重启 WGDashboard 以使用最新的设置", "Max RTT \\(ms\\)": "最高来回时间（微秒）", "Memory": "内存", "Memory Usage": "内存用量", "Message": "消息", "Min RTT \\(ms\\)": "最低来回时间（微秒）", "Multi-Factor Authentication \\(MFA\\)": "多重身份验证 (MFA)", "Name": "名称", "Network": "网络", "Never Expire": "从不过期", "New Configuration": "新配置", "New Password": "新密码", "Next": "下一步", "Nice to meet you!": "很高兴见到您！", "No": "否", "No Encryption": "无加密", "No Templates": "没有模板", "No WGDashboard API Key": "没有 WGDashboard API 秘钥", "No active job at the moment\\.": "没有未运行的任务", "No available IP containing": "没有可用的 IP 地址含有 ", "No backup yet, click the button above to create backup\\.": "还没有任何备份，点击上方按钮创建", "No more available IP can assign": "没有更多可用的 IP 可以分配了", "No peer assigned to this client": "此用户没有分配端点", "No result": "没有结果", "Notes": "笔记", "OTP from your authenticator": "您多重身份验证器的一次性验证码", "Off": "已停用", "Official Documentation": "官方文档", "Oh no\\.\\.\\. This link is either expired or invalid\\.": "噢不！此链接已过期或不正确。", "On": "已启用", "Once you deleted this configuration\\:": "当您删除了此配置后：", "Only apply to peers in this configuration": "只应用到此配置的端点", "Open File": "打开文件", "Optional Settings": "可选设定", "Or you can click the link below:": "或者您可以点击以下链接：", "Other Settings": "其它设定", "Override Peer Settings": "覆盖端点默认设定", "Password": "密码", "Path": "路径", "Payload URL": "链接", "Peer": "端点", "Peer Configuration File": "端点配置文件", "Peer Created": "创建端点", "Peer Default Settings": "端点默认设定", "Peer Deleted": "删除端点", "Peer Details": "端点详情", "Peer Historical Endpoints": "端点历史末端地址", "Peer Historical Sessions": "端点历史活动", "Peer Jobs": "端点任务", "Peer Remote Endpoint": "端点末端地址", "Peer Settings": "端点设定", "Peer Updated": "更新端点", "Peer created successfully": "成功创建端点", "Peer data usage reset successfully": "端点数据重置成功", "Peer does not exist": "此端点不存在", "Peer download started": "端点文件下载开始", "Peer job deleted": "端点任务删除成功", "Peer job saved": "端点任务保存成功", "Peer saved": "端点保存成功", "Peers": "端点", "Peers Data Usage": "端点的数据用量", "Peers Default Settings": "端点默认设置", "Peers Settings": "端点设定", "Persistent Keepalive": "持久保持活动", "Persistent Keepalive format is not correct": "持久保持活动格式不正确", "Pick Available IP": "选择可用的 IP 地址", "Pinging...": "尝试连接中...", "Please fill in all required box": "请填写所有必填项", "Please fill in the following fields to finish setup": "请填入以下信息来完成初始化设置", "Please provide a valid configuration name": "请提供一个正确的配置名称", "Please provide ipAddress": "请提供 ipAddress", "Please provide ipAddress and count": "请提供 ipAddress 和 count", "Please specify amount of peers you want to add": "请提供批量添加端点的数量", "Please specify an IP Address (v4/v6)": "请提供一个 IP 地址 （v4或v6）", "Please specify job": "请提供任务", "Please specify one or more peers": "请提供一个或更多端点", "Please specify peer and configuration": "请提供配置名称以及端点", "Port": "端口", "Pre-Shared Key": "共享秘钥", "Previous Sessions": "以往活动", "Private Key": "秘钥", "Private key does not match with the public key": "秘钥与公钥不匹配", "Processes": "进程", "Protocol": "协议", "Public Key": "公钥", "QR Code": "二维码", "Ready": "准备就绪", "Real Time Received Data Usage": "实时接收数据量", "Real Time Sent Data Usage": "实时发送数据量", "Received": "接收数据", "Refresh": "刷新", "Refresh Interval": "刷新间隔", "Remember to remove / at the end of your path. e.g /etc/wireguard": "请把路径最后的 /（左斜杠）移除，例如：/etc/wireguard", "Remove Icon": "移除图标", "Repeat New Password": "重复新密码", "Reset": "重置", "Reset Data Usage": "重置数据用量", "Restore": "恢复", "Restore Configuration": "恢复配置", "Restoring": "恢复中...", "Restrict Access": "限制访问", "Restrict Peer": "限制端点", "Restricted": "已限制端点", "Restricted ([0-9]{1,}) peer\\(s\\)": "限制访问了$1个端点", "Restricted ([0-9]{1,}) peer\\(s\\) successfully. Failed to restrict ([0-9]{1,}) peer\\(s\\)": "成功限制访问了$1个端点，失败限制访问了$2个端点", "Restricted Peers?": "已限制访问端点", "Restricting\\.\\.\\.": "限制访问中...", "Revert": "撤销更改", "Save": "保存", "Save Configuration": "保存配置", "Save Peer": "保存端点", "Saving\\.\\.\\.": "保存中...", "Scan QR Code with the WireGuard App to add peer": "使用 WireGuard APP 扫描以下二维码来添加端点", "Schedule Jobs": "计划任务", "Search": "搜索", "Search Clients\\.\\.\\.": "搜索用户...", "Search Icon": "搜索图标", "Search Peers\\.\\.\\.": "搜索端点...", "Select All": "选择所有", "Select Peers": "选择端点", "Select a backup you want to restore": "选择一个您想恢复的配置", "Selected Backup": "已选择备份", "Send": "发送", "Send From": "发送自", "Send Test Email": "发送测试邮件", "Sending\\.\\.\\.": "发送中...", "Sent": "发送数据", "Sent / Received / Lost Package": "发送 / 接收 / 丢失数据包", "Server": "服务器", "Server List": "服务器列表", "Sessions": "活动", "Settings": "设定", "Setup": "设置", "Share Peer": "分享端点", "Share link failed to create. Reason: (.*)": "端点分享链接生成失败。原因：$1", "Share with Email": "使用邮件分享", "Sharing\\.\\.\\.": "分享中...", "Show All Peers": "显示所有端点", "Sign In": "登录", "Sign Out": "退出登录", "Sign in session ended, please sign in again": "登录已过期，请重新登录", "Signing In\\.\\.\\.": "正在登录...", "Sorry, your username or password is incorrect.": "对不起，您的用户名或密码不正确", "Sort By": "排列方式", "Start Sharing": "开始分享", "Started At": "开始于", "Status": "状态", "Step (.*)": "第$1步", "Stop Sharing": "停止分享", "Stop Sharing\\.\\.\\.": "停止分享中...", "Storage": "储存", "Subnets \\& Listen Ports Templates": "子网 & 监听端口模板", "Subscribed Actions": "已订阅的动作", "Success": "成功", "Swap Memory": "交换区内存", "Swap Memory Usage": "交换区内存用量", "System Status": "系统状态", "TOTP verified!": "一次性验证码验证成功！", "Table": "路由表", "Tag": "标签", "Tag Peer": "标签端点", "Tags": "标签", "The maximum number of peers can add is (.*)": "最多只能添加$1个端点", "Theme": "主题", "This IP is not available: (.*)": "此 IP 地址不可用：$1", "This configuration have ([0-9].*) backups": "此配置有$1个备份", "This configuration have no backup": "此配置没有备份", "This peer already exist": "此端点已存在", "This peer does not have any job yet\\.": "此端点还没有任何任务", "This will be changed globally, and will be apply to all peer's QR code and configuration file.": "更改这个设定会应用到所有端点的配置文件和配置二维码", "To update this configuration's name, WGDashboard will execute the following operations:": "如果更新这个配置名称，WGDashboard会执行以下操作：", "Toggle When Start Up": "运行后启动配置", "Tools": "工具箱", "Total": "总数据", "Total Received": "总接收数据用量", "Total Sent": "总发送数据用量", "Total Usage": "总数据用量", "Turning Off\\.\\.\\.": "停用中...", "Turning On\\.\\.\\.": "启用中...", "Unsaved Job": "未保存任务", "Untitled Peer": "未命名端点", "Update Name": "更新名称", "Update Password": "更新密码", "Update peer failed when saving the configuration": "配置保存端点失败", "Update peer failed when updating Allowed IPs": "更新允许的 IP 地址失败", "Update peer failed when updating Pre-Shared Key": "更新共享密钥失败", "Updated at": "更新于", "Use your own Private and Public Key": "使用您自己的秘钥和公钥", "Username": "用户名", "Value": "值", "Verify SSL": "验证SSL", "WGDashboard API Keys function is disabled": "WGDashboard 的 API 秘钥功能并未开启", "WGDashboard Account Settings": "WGDashboard 账户设定", "WGDashboard Settings": "WGDashboard 设定", "WGDashboard language update failed": "WGDashboard 语言更新失败", "WGDashboard will sent a POST Request to the URL below with details of any subscribed events\\.": "WGDashboard会发送一个包含订阅内容的POST请求到以下指定的URL", "We highly suggest to enable SSL verification": "我们墙裂推荐您开启SSL验证", "Webhooks*": "网络钩子", "Welcome to": "欢迎来到", "What\\'s the body\\?": "正文是什么？", "What\\'s the subject\\?": "主题是什么？", "When should this API Key expire\\?": "这个 API 秘钥什么时候过期呢？", "Who are you sending to\\?": "您想发送给谁？", "WireGuard Configuration Settings": "WireGuard 配置设定", "WireGuard Configurations": "WireGuard 配置", "WireGuard Configurations Settings": "WireGuard 配置设定", "WireGuard configuration path saved": "WireGuard 配置路径保存成功", "Yes": "是", "You can add up to (.*) peers": "您最多可以添加 $1 个端点", "You can visit our: ": "您可以访问我们的：", "You don't have any WireGuard configurations yet. Please check the configuration folder or change it in Settings. By default the folder is /etc/wireguard.": "您还没有任何WireGuard配置。请检查您的配置文件夹或前往设置更改路径。默认文件夹是 /etc/wireguard", "You don't have any configuration to restore": "您没有任何配置备份可以恢复", "You're on the latest version": "已经是最新版本", "\\(At least 8 characters and make sure is strong enough!\\)": "(至少8个字符或以上并且确保它足够复杂哟!)", "\\(Required for QR Code and Download\\)": "（二维码以及下载功能需要填写秘钥）", "\\(Required\\)": "（必填项）", "^([0-9].*) Sessions*$": "$1个活动", "if": "如果", "is": "是", "larger than": "大于", "or": "或", "or click the button below to download the ": "或点击下面的按钮下载 ", "then": "那就", "to add your server": "添加您的服务器" }