Add repeater error count delivery in telemetry

src/meshcore/parsing.py

@@ -105,5 +105,11 @@ def parse_status(data, pubkey_prefix=None, offset=0):
     res["direct_dups"] = int.from_bytes(data[offset+44:offset+46], byteorder="little")
     res["flood_dups"] = int.from_bytes(data[offset+46:offset+48], byteorder="little")
     res["rx_airtime"] = int.from_bytes(data[offset+48:offset+52], byteorder="little")
-    
+
+    # n_recv_errors: uint32_t appended in firmware v1.12.0 (56-byte frame)
+    if len(data) >= offset + 56:
+        res["recv_errors"] = int.from_bytes(data[offset+52:offset+56], byteorder="little")
+    else:
+        res["recv_errors"] = None
+
     return res

tests/unit/test_parse_status.py

@@ -0,0 +1,146 @@
+"""Tests for meshcore.parsing.parse_status covering the RepeaterStats binary frame.
+
+The firmware struct (MeshCore/examples/simple_repeater/MyMesh.h) is:
+
+    struct RepeaterStats {
+      uint16_t batt_milli_volts;        // offset  0 (2)
+      uint16_t curr_tx_queue_len;       // offset  2 (2)
+      int16_t  noise_floor;             // offset  4 (2)
+      int16_t  last_rssi;               // offset  6 (2)
+      uint32_t n_packets_recv;          // offset  8 (4)
+      uint32_t n_packets_sent;          // offset 12 (4)
+      uint32_t total_air_time_secs;     // offset 16 (4)
+      uint32_t total_up_time_secs;      // offset 20 (4)
+      uint32_t n_sent_flood;            // offset 24 (4)
+      uint32_t n_sent_direct;           // offset 28 (4)
+      uint32_t n_recv_flood;            // offset 32 (4)
+      uint32_t n_recv_direct;           // offset 36 (4)
+      uint16_t err_events;              // offset 40 (2)
+      int16_t  last_snr;   // x4        // offset 42 (2)
+      uint16_t n_direct_dups;           // offset 44 (2)
+      uint16_t n_flood_dups;            // offset 46 (2)
+      uint32_t total_rx_air_time_secs;  // offset 48 (4)
+      uint32_t n_recv_errors;           // offset 52 (4)  -- 56-byte frame
+    };
+"""
+import struct
+from meshcore.parsing import parse_status
+
+
+def _build_frame(
+    *,
+    bat=4200,
+    tx_queue_len=3,
+    noise_floor=-118,
+    last_rssi=-85,
+    nb_recv=1000,
+    nb_sent=500,
+    airtime=3600,
+    uptime=86400,
+    sent_flood=100,
+    sent_direct=400,
+    recv_flood=300,
+    recv_direct=700,
+    err_events=0,
+    last_snr_x4=30,  # 7.5 dB * 4
+    direct_dups=5,
+    flood_dups=10,
+    rx_airtime=7200,
+    recv_errors=None,
+):
+    """Build a RepeaterStats binary frame (52 or 56 bytes)."""
+    frame = struct.pack(
+        "<HHhhIIIIIIIIHhHHI",
+        bat,
+        tx_queue_len,
+        noise_floor,
+        last_rssi,
+        nb_recv,
+        nb_sent,
+        airtime,
+        uptime,
+        sent_flood,
+        sent_direct,
+        recv_flood,
+        recv_direct,
+        err_events,
+        last_snr_x4,
+        direct_dups,
+        flood_dups,
+        rx_airtime,
+    )
+    assert len(frame) == 52
+    if recv_errors is not None:
+        frame += struct.pack("<I", recv_errors)
+    return frame
+
+
+class TestParseStatusWithPrefix:
+    """parse_status called with an explicit pubkey_prefix (binary-request path)."""
+
+    def test_full_56_byte_frame(self):
+        data = _build_frame(recv_errors=42)
+        res = parse_status(data, pubkey_prefix="aabb11223344")
+
+        assert res["pubkey_pre"] == "aabb11223344"
+        assert res["bat"] == 4200
+        assert res["tx_queue_len"] == 3
+        assert res["noise_floor"] == -118
+        assert res["last_rssi"] == -85
+        assert res["nb_recv"] == 1000
+        assert res["nb_sent"] == 500
+        assert res["airtime"] == 3600
+        assert res["uptime"] == 86400
+        assert res["sent_flood"] == 100
+        assert res["sent_direct"] == 400
+        assert res["recv_flood"] == 300
+        assert res["recv_direct"] == 700
+        assert res["full_evts"] == 0
+        assert res["last_snr"] == 7.5
+        assert res["direct_dups"] == 5
+        assert res["flood_dups"] == 10
+        assert res["rx_airtime"] == 7200
+        assert res["recv_errors"] == 42
+
+    def test_legacy_52_byte_frame(self):
+        data = _build_frame()  # no recv_errors → 52 bytes
+        res = parse_status(data, pubkey_prefix="aabb11223344")
+
+        assert res["bat"] == 4200
+        assert res["recv_errors"] is None
+
+    def test_nonzero_recv_errors(self):
+        data = _build_frame(recv_errors=123456)
+        res = parse_status(data, pubkey_prefix="cc1122334455")
+        assert res["recv_errors"] == 123456
+
+
+class TestParseStatusEmbedded:
+    """parse_status called without pubkey_prefix (STATUS_RESPONSE push path).
+
+    In this path the first 2 bytes are a header, bytes 2-8 are the pubkey
+    prefix, and fields start at offset 8.
+    """
+
+    def test_56_byte_payload_with_header(self):
+        header = b"\x00\x00"  # 2-byte header
+        pubkey = bytes.fromhex("aabb11223344")  # 6-byte prefix
+        body = _build_frame(recv_errors=99)
+        data = header + pubkey + body
+
+        res = parse_status(data)
+
+        assert res["pubkey_pre"] == "aabb11223344"
+        assert res["bat"] == 4200
+        assert res["recv_errors"] == 99
+
+    def test_52_byte_payload_with_header(self):
+        header = b"\x00\x00"
+        pubkey = bytes.fromhex("aabb11223344")
+        body = _build_frame()  # 52 bytes, no recv_errors
+        data = header + pubkey + body
+
+        res = parse_status(data)
+
+        assert res["pubkey_pre"] == "aabb11223344"
+        assert res["recv_errors"] is None