first commit

autofs/etc/auto.master

@@ -0,0 +1,44 @@
+#
+# Sample auto.master file
+# This is a 'master' automounter map and it has the following format:
+# mount-point [map-type[,format]:]map [options]
+# For details of the format look at auto.master(5).
+#
+#/misc	/etc/auto.misc
+#
+# NOTE: mounts done from a hosts map will be mounted with the
+#	"nosuid" and "nodev" options unless the "suid" and "dev"
+#	options are explicitly given.
+#
+#/net	-hosts
+#
+# Include /etc/auto.master.d/*.autofs
+# To add an extra map using this mechanism you will need to add
+# two configuration items - one /etc/auto.master.d/extra.autofs file
+# (using the same line format as the auto.master file)
+# and a separate mount map (e.g. /etc/auto.extra or an auto.extra NIS map)
+# that is referred to by the extra.autofs file.
+#
++dir:/etc/auto.master.d
+#
+# If you have fedfs set up and the related binaries, either
+# built as part of autofs or installed from another package,
+# uncomment this line to use the fedfs program map to access
+# your fedfs mounts.
+#/nfs4  /usr/sbin/fedfs-map-nfs4 nobind
+#
+# Include central master map if it can be found using
+# nsswitch sources.
+#
+# Note that if there are entries for /net or /misc (as
+# above) in the included master map any keys that are the
+# same will not be seen as the first read key seen takes
+# precedence.
+#
++auto.master
+#
+#
+/mnt/vchanger      /etc/auto.vchanger        --timeout=30
+/mnt/cifs          /etc/auto.smb             --timeout=120
+#
+#eof

autofs/etc/auto.net

@@ -0,0 +1,54 @@
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+# Look at what a host is exporting to determine what we can mount.
+# This is very simple, but it appears to work surprisingly well
+
+key="$1"
+
+# add "nosymlink" here if you want to suppress symlinking local filesystems
+# add "nonstrict" to make it OK for some filesystems to not mount
+# choose one of the two lines below depending on the NFS version in your
+# environment
+
+[ -f /etc/default/autofs ] && . /etc/default/autofs
+
+if [ -z "$MOUNT_NFS_DEFAULT_PROTOCOL" -o "$MOUNT_NFS_DEFAULT_PROTOCOL" == "3" ]; then
+	# Showmount comes in a number of names and varieties.  "showmount" is
+	# typically an older version which accepts the '--no-headers' flag
+	# but ignores it.  "kshowmount" is the newer version installed with knfsd,
+	# which both accepts and acts on the '--no-headers' flag.
+	#SHOWMOUNT="kshowmount --no-headers -e $key"
+	#SHOWMOUNT="showmount -e $key | tail -n +2"
+
+	for P in /bin /sbin /usr/bin /usr/sbin
+	do
+		for M in showmount kshowmount
+		do
+			if [ -x $P/$M ]
+			then
+				SMNT=$P/$M
+				break
+			fi
+		done
+	done
+
+	[ -x $SMNT ] || exit 1
+
+	# Newer distributions get this right
+	SHOWMOUNT="$SMNT --no-headers -e $key"
+
+	$SHOWMOUNT | LC_ALL=C cut -d' ' -f1 | LC_ALL=C sort -u | \
+		awk -v key="$key" -v opts="$opts" -- '
+		BEGIN	{ ORS=""; first=1 }
+			{ if (first) { print opts; first=0 }; print " \\\n\t" $1, key ":" $1 }
+		END	{ if (!first) print "\n"; else exit 1 }
+		' | sed 's/#/\\#/g'
+	opts="-fstype=nfs,hard,intr,nodev,nosuid"
+else
+	# NFSv4
+	opts="-fstype=nfs4,hard,intr,nodev,nosuid,async"
+
+	echo "$opts $key:/"
+fi

autofs/etc/auto.smb

@@ -0,0 +1,82 @@
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+# Automagically mount CIFS shares in the network, similar to
+# what autofs -hosts does for NFS.
+
+# Put a line like the following in /etc/auto.master:
+# /cifs  /etc/auto.smb --timeout=300
+# You'll be able to access Windows and Samba shares in your network
+# under /cifs/host.domain/share
+
+# "smbclient -L" is used to obtain a list of shares from the given host.
+# In some environments, this requires valid credentials.
+
+# This script knows 2 methods to obtain credentials:
+# 1) if a credentials file (see mount.cifs(8)) is present
+#    under /etc/creds/$key, use it.
+# 2) Otherwise, try to find a usable kerberos credentials cache
+#    for the uid of the user that was first to trigger the mount
+#    and use that.
+# If both methods fail, the script will try to obtain the list
+# of shares anonymously.
+
+get_krb5_cache() {
+    cache=
+    uid=${UID}
+    for x in $(ls -d /run/user/$uid/krb5cc_* 2>/dev/null); do
+        if [ -d "$x" ] && klist -s DIR:"$x"; then
+	    cache=DIR:$x
+            return
+        fi
+    done
+    if [ -f /tmp/krb5cc_$uid ] && klist -s /tmp/krb5cc_$uid; then
+	    cache=/tmp/krb5cc_$uid
+	    return
+    fi
+}
+
+key="$1"
+opts="-fstype=cifs"
+
+for P in /bin /sbin /usr/bin /usr/sbin
+do
+	if [ -x $P/smbclient ]
+	then
+		SMBCLIENT=$P/smbclient
+		break
+	fi
+done
+
+[ -x $SMBCLIENT ] || exit 1
+
+creds=/etc/creds/$key
+if [ -f "$creds" ]; then
+    opts="$opts"',uid=$UID,gid=$GID,credentials='"$creds"
+    smbopts="-A $creds"
+else
+    get_krb5_cache
+    if [ -n "$cache" ]; then
+        opts="$opts"',multiuser,cruid=$UID,sec=krb5i'
+        smbopts="-k"
+        export KRB5CCNAME=$cache
+    else
+        opts="$opts"',guest'
+        smbopts="-N"
+    fi
+fi
+
+$SMBCLIENT $smbopts -gL "$key" 2>/dev/null| awk -v "key=$key" -v "opts=$opts" -F '|' -- '
+	BEGIN	{ ORS=""; first=1 }
+	/Disk/	{
+		  if (first)
+			print opts; first=0
+		  dir = $2
+		  loc = $2
+		  # Enclose mount dir and location in quotes
+		  print " \\\n\t \"/" dir "\"", "\"://" key "/" loc "\""
+		}
+	END 	{ if (!first) print "\n"; else exit 1 }
+	'
+

autofs/etc/auto.vchanger

@@ -0,0 +1,3 @@
+# /etc/auto.vchanger
+*          -fstype=auto,rw,sync       :/dev/disk/by-uuid/&
+# eof

autofs/etc/creds/hostname

@@ -0,0 +1,3 @@
+username=user
+password=secretWord
+domain=workgroup