Fix fetching same PR twice under wrong name

Add Variant rak3401 (for new 1W booster kit)

boards/rak3401.json

@@ -0,0 +1,72 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "WisCore RAK3401 Board",
+    "mcu": "nrf52840",
+    "variant": "WisCore_RAK3401_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "WisCore RAK3401 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

build.sh

@@ -29,6 +29,20 @@ $ sh build.sh build-repeater-firmwares
 
 Build all chat room server firmwares
 $ sh build.sh build-room-server-firmwares
+
+Environment Variables:
+  DISABLE_DEBUG=1: Disables all debug logging flags (MESH_DEBUG, MESH_PACKET_LOGGING, etc.)
+                   If not set, debug flags from variant platformio.ini files are used.
+
+Examples:
+Build without debug logging:
+$ export FIRMWARE_VERSION=v1.0.0
+$ export DISABLE_DEBUG=1
+$ sh build.sh build-firmware RAK_4631_repeater
+
+Build with debug logging (default, uses flags from variant files):
+$ export FIRMWARE_VERSION=v1.0.0
+$ sh build.sh build-firmware RAK_4631_repeater
 EOF
 }
 
@@ -68,6 +82,13 @@ get_pio_envs_ending_with_string() {
   done
 }
 
+# disable all debug logging flags if DISABLE_DEBUG=1 is set
+disable_debug_flags() {
+  if [ "$DISABLE_DEBUG" == "1" ]; then
+    export PLATFORMIO_BUILD_FLAGS="${PLATFORMIO_BUILD_FLAGS} -UMESH_DEBUG -UBLE_DEBUG_LOGGING -UWIFI_DEBUG_LOGGING -UBRIDGE_DEBUG -UGPS_NMEA_DEBUG -UCORE_DEBUG_LEVEL -UESPNOW_DEBUG_LOGGING -UDEBUG_RP2040_WIRE -UDEBUG_RP2040_SPI -UDEBUG_RP2040_CORE -UDEBUG_RP2040_PORT -URADIOLIB_DEBUG_SPI -UCFG_DEBUG -URADIOLIB_DEBUG_BASIC -URADIOLIB_DEBUG_PROTOCOL"
+  fi
+}
+
 # build firmware for the provided pio env in $1
 build_firmware() {
 
@@ -94,6 +115,9 @@ build_firmware() {
   # add firmware version info to end of existing platformio build flags in environment vars
   export PLATFORMIO_BUILD_FLAGS="${PLATFORMIO_BUILD_FLAGS} -DFIRMWARE_BUILD_DATE='\"${FIRMWARE_BUILD_DATE}\"' -DFIRMWARE_VERSION='\"${FIRMWARE_VERSION_STRING}\"'"
 
+  # disable debug flags if requested
+  disable_debug_flags
+
   # build firmware target
   pio run -e $1
 

examples/companion_radio/DataStore.cpp

@@ -227,6 +227,7 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.read((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }
@@ -261,6 +262,7 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }

examples/companion_radio/MyMesh.cpp

@@ -54,6 +54,8 @@
 #define CMD_SEND_CONTROL_DATA         55   // v8+
 #define CMD_GET_STATS                 56   // v8+, second byte is stats type
 #define CMD_SEND_ANON_REQ             57
+#define CMD_SET_AUTOADD_CONFIG        58
+#define CMD_GET_AUTOADD_CONFIG        59
 
 // Stats sub-types for CMD_GET_STATS
 #define STATS_TYPE_CORE               0
@@ -85,6 +87,7 @@
 #define RESP_CODE_ADVERT_PATH         22
 #define RESP_CODE_TUNING_PARAMS       23
 #define RESP_CODE_STATS               24   // v8+, second byte is stats type
+#define RESP_CODE_AUTOADD_CONFIG      25
 
 #define SEND_TIMEOUT_BASE_MILLIS        500
 #define FLOOD_SEND_TIMEOUT_FACTOR       16.0f
@@ -110,6 +113,8 @@
 #define PUSH_CODE_BINARY_RESPONSE       0x8C
 #define PUSH_CODE_PATH_DISCOVERY_RESPONSE 0x8D
 #define PUSH_CODE_CONTROL_DATA          0x8E   // v8+
+#define PUSH_CODE_CONTACT_DELETED       0x8F // used to notify client app of deleted contact when overwriting oldest
+#define PUSH_CODE_CONTACTS_FULL         0x90 // used to notify client app that contacts storage is full
 
 #define ERR_CODE_UNSUPPORTED_CMD        1
 #define ERR_CODE_NOT_FOUND              2
@@ -120,6 +125,15 @@
 
 #define MAX_SIGN_DATA_LEN               (8 * 1024) // 8K
 
+// Auto-add config bitmask
+// Bit 0: If set, overwrite oldest non-favourite contact when contacts file is full
+// Bits 1-4: these indicate which contact types to auto-add when manual_contact_mode = 0x01
+#define AUTO_ADD_OVERWRITE_OLDEST (1 << 0)  // 0x01 - overwrite oldest non-favourite when full
+#define AUTO_ADD_CHAT             (1 << 1)  // 0x02 - auto-add Chat (Companion) (ADV_TYPE_CHAT)
+#define AUTO_ADD_REPEATER         (1 << 2)  // 0x04 - auto-add Repeater (ADV_TYPE_REPEATER)
+#define AUTO_ADD_ROOM_SERVER      (1 << 3)  // 0x08 - auto-add Room Server (ADV_TYPE_ROOM)
+#define AUTO_ADD_SENSOR           (1 << 4)  // 0x10 - auto-add Sensor (ADV_TYPE_SENSOR)
+
 void MyMesh::writeOKFrame() {
   uint8_t buf[1];
   buf[0] = RESP_CODE_OK;
@@ -262,9 +276,54 @@ bool MyMesh::isAutoAddEnabled() const {
   return (_prefs.manual_add_contacts & 1) == 0;
 }
 
+bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
+  if ((_prefs.manual_add_contacts & 1) == 0) {
+    return true;
+  }
+  
+  uint8_t type_bit = 0;
+  switch (contact_type) {
+    case ADV_TYPE_CHAT:
+      type_bit = AUTO_ADD_CHAT;
+      break;
+    case ADV_TYPE_REPEATER:
+      type_bit = AUTO_ADD_REPEATER;
+      break;
+    case ADV_TYPE_ROOM:
+      type_bit = AUTO_ADD_ROOM_SERVER;
+      break;
+    case ADV_TYPE_SENSOR:
+      type_bit = AUTO_ADD_SENSOR;
+      break;
+    default:
+      return false;  // Unknown type, don't auto-add
+  }
+  
+  return (_prefs.autoadd_config & type_bit) != 0;
+}
+
+bool MyMesh::shouldOverwriteWhenFull() const {
+  return (_prefs.autoadd_config & AUTO_ADD_OVERWRITE_OLDEST) != 0;
+}
+
+void MyMesh::onContactOverwrite(const uint8_t* pub_key) {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACT_DELETED;
+    memcpy(&out_frame[1], pub_key, PUB_KEY_SIZE);
+    _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
+  }
+}
+
+void MyMesh::onContactsFull() {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACTS_FULL;
+    _serial->writeFrame(out_frame, 1);
+  }
+}
+
 void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) {
   if (_serial->isConnected()) {
-    if (!isAutoAddEnabled() && is_new) {
+    if (is_new) {
       writeContactRespFrame(PUSH_CODE_NEW_ADVERT, contact);
     } else {
       out_frame[0] = PUSH_CODE_ADVERT;
@@ -299,7 +358,7 @@ void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path
     memcpy(p->path, path, p->path_len);
   }
 
-  dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
+  if (!is_new) dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY); // only schedule lazy write for contacts that are in contacts[]
 }
 
 static int sort_by_recent(const void *a, const void *b) {
@@ -803,6 +862,7 @@ void MyMesh::begin(bool has_display) {
 
   resetContacts();
   _store->loadContacts(this);
+  bootstrapRTCfromContacts();
   addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel
   _store->loadChannels(this);
 
@@ -1663,6 +1723,15 @@ void MyMesh::handleCmdFrame(size_t len) {
     } else {
       writeErrFrame(ERR_CODE_TABLE_FULL);
     }
+  } else if (cmd_frame[0] == CMD_SET_AUTOADD_CONFIG) {
+    _prefs.autoadd_config = cmd_frame[1];
+    savePrefs();
+    writeOKFrame();  
+  } else if (cmd_frame[0] == CMD_GET_AUTOADD_CONFIG) {
+    int i = 0;
+    out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
+    out_frame[i++] = _prefs.autoadd_config;
+    _serial->writeFrame(out_frame, i);
   } else {
     writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
     MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]);

examples/companion_radio/MyMesh.h

@@ -114,6 +114,10 @@ protected:
 
   void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) override;
   bool isAutoAddEnabled() const override;
+  bool shouldAutoAddContactType(uint8_t type) const override;
+  bool shouldOverwriteWhenFull() const override;
+  void onContactsFull() override;
+  void onContactOverwrite(const uint8_t* pub_key) override;
   bool onContactPathRecv(ContactInfo& from, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
   void onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) override;
   void onContactPathUpdated(const ContactInfo &contact) override;

examples/companion_radio/NodePrefs.h

@@ -27,4 +27,5 @@ struct NodePrefs {  // persisted to file
   uint8_t  buzzer_quiet;
   uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
   uint32_t gps_interval;     // GPS read interval in seconds
+  uint8_t autoadd_config;    // bitmask for auto-add contacts config
 };

fetch_prs.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+git branch -D pr-1199
+git branch -D pr-1297
+git branch -D pr-1338
+
+# fetch PRs
+git fetch upstream pull/1338/head:pr-1338
+git fetch upstream pull/1297/head:pr-1297
+git fetch upstream pull/1199/head:pr-1199

merge_prs.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+git merge pr-1338 --no-edit -m "Integration of upstrem PR #1338"
+git merge pr-1297 --no-edit -m "Integration of upstrem PR #1297"
+git merge pr-1199 --no-edit -m "Integration of upstrem PR #1199"
+
+git merge pio-ini-adjustments -m "platformio.ini: Adjust defaults for LoRa frequncies and advert interval limits"
+
+

src/helpers/BaseChatMesh.cpp

@@ -55,6 +55,54 @@ void BaseChatMesh::sendAckTo(const ContactInfo& dest, uint32_t ack_hash) {
   }
 }
 
+void BaseChatMesh::bootstrapRTCfromContacts() {
+  uint32_t latest = 0;
+  for (int i = 0; i < num_contacts; i++) {
+    if (contacts[i].lastmod > latest) {
+      latest = contacts[i].lastmod;
+    }
+  }
+  if (latest != 0) {
+    getRTCClock()->setCurrentTime(latest + 1);
+  }
+}
+
+ContactInfo* BaseChatMesh::allocateContactSlot() {
+  if (num_contacts < MAX_CONTACTS) {
+    return &contacts[num_contacts++];
+  } else if (shouldOverwriteWhenFull()) {
+    // Find oldest non-favourite contact by oldest lastmod timestamp
+    int oldest_idx = -1;
+    uint32_t oldest_lastmod = 0xFFFFFFFF;
+    for (int i = 0; i < num_contacts; i++) {
+      bool is_favourite = (contacts[i].flags & 0x01) != 0;
+      if (!is_favourite && contacts[i].lastmod < oldest_lastmod) {
+        oldest_lastmod = contacts[i].lastmod;
+        oldest_idx = i;
+      }
+    }
+    if (oldest_idx >= 0) {
+      onContactOverwrite(contacts[oldest_idx].id.pub_key);
+      return &contacts[oldest_idx];
+    }
+  }
+  return NULL; // no space, no overwrite or all contacts are all favourites
+}
+
+void BaseChatMesh::populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp) {
+  memset(&ci, 0, sizeof(ci));
+  ci.id = id;
+  ci.out_path_len = -1;  // initially out_path is unknown
+  StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
+  ci.type = parser.getType();
+  if (parser.hasLatLon()) {
+    ci.gps_lat = parser.getIntLat();
+    ci.gps_lon = parser.getIntLon();
+  }
+  ci.last_advert_timestamp = timestamp;
+  ci.lastmod = getRTCClock()->getCurrentTime();
+}
+
 void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id, uint32_t timestamp, const uint8_t* app_data, size_t app_data_len) {
   AdvertDataParser parser(app_data, app_data_len);
   if (!(parser.isValid() && parser.hasName())) {
@@ -85,50 +133,38 @@ void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id,
   }
   putBlobByKey(id.pub_key, PUB_KEY_SIZE, temp_buf, plen);
 
-  bool is_new = false;
+  bool is_new = false; // true = not in contacts[], false = exists in contacts[]
   if (from == NULL) {
-    if (!isAutoAddEnabled()) {
+    if (!shouldAutoAddContactType(parser.getType())) {
       ContactInfo ci;
-      memset(&ci, 0, sizeof(ci));
-      ci.id = id;
-      ci.out_path_len = -1;  // initially out_path is unknown
-      StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
-      ci.type = parser.getType();
-      if (parser.hasLatLon()) {
-        ci.gps_lat = parser.getIntLat();
-        ci.gps_lon = parser.getIntLon();
-      }
-      ci.last_advert_timestamp = timestamp;
-      ci.lastmod = getRTCClock()->getCurrentTime();
+      populateContactFromAdvert(ci, id, parser, timestamp);
       onDiscoveredContact(ci, true, packet->path_len, packet->path);       // let UI know
       return;
     }
 
-    is_new = true;
-    if (num_contacts < MAX_CONTACTS) {
-      from = &contacts[num_contacts++];
-      from->id = id;
-      from->out_path_len = -1;  // initially out_path is unknown
-      from->gps_lat = 0;   // initially unknown GPS loc
-      from->gps_lon = 0;
-      from->sync_since = 0;
-
-      from->shared_secret_valid = false;  // ecdh shared_secret will be calculated later on demand  
-    } else {
-      MESH_DEBUG_PRINTLN("onAdvertRecv: contacts table is full!");
+    from = allocateContactSlot();
+    if (from == NULL) {
+      ContactInfo ci;
+      populateContactFromAdvert(ci, id, parser, timestamp);
+      onDiscoveredContact(ci, true, packet->path_len, packet->path);
+      onContactsFull();
+      MESH_DEBUG_PRINTLN("onAdvertRecv: unable to allocate contact slot for new contact");
       return;
     }
+    
+    populateContactFromAdvert(*from, id, parser, timestamp);
+    from->sync_since = 0;
+    from->shared_secret_valid = false;
   }
-
   // update
-  StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
-  from->type = parser.getType();
-  if (parser.hasLatLon()) {
-    from->gps_lat = parser.getIntLat();
-    from->gps_lon = parser.getIntLon();
-  }
-  from->last_advert_timestamp = timestamp;
-  from->lastmod = getRTCClock()->getCurrentTime();
+    StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
+    from->type = parser.getType();
+    if (parser.hasLatLon()) {
+      from->gps_lat = parser.getIntLat();
+      from->gps_lon = parser.getIntLon();
+    }
+    from->last_advert_timestamp = timestamp;
+    from->lastmod = getRTCClock()->getCurrentTime();
 
   onDiscoveredContact(*from, is_new, packet->path_len, packet->path);       // let UI know
 }
@@ -722,10 +758,9 @@ ContactInfo* BaseChatMesh::lookupContactByPubKey(const uint8_t* pub_key, int pre
 }
 
 bool BaseChatMesh::addContact(const ContactInfo& contact) {
-  if (num_contacts < MAX_CONTACTS) {
-    auto dest = &contacts[num_contacts++];
+  ContactInfo* dest = allocateContactSlot();
+  if (dest) {
     *dest = contact;
-
     dest->shared_secret_valid = false; // mark shared_secret as needing calculation
     return true;  // success
   }

src/helpers/BaseChatMesh.h

@@ -88,10 +88,17 @@ protected:
     memset(connections, 0, sizeof(connections));
   }
 
+  void bootstrapRTCfromContacts();
   void resetContacts() { num_contacts = 0; }
+  void populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp);
+  ContactInfo* allocateContactSlot(); // helper to find slot for new contact
 
   // 'UI' concepts, for sub-classes to implement
   virtual bool isAutoAddEnabled() const { return true; }
+  virtual bool shouldAutoAddContactType(uint8_t type) const { return true; }
+  virtual void onContactsFull() {};
+  virtual bool shouldOverwriteWhenFull() const { return false; }
+  virtual void onContactOverwrite(const uint8_t* pub_key) {};
   virtual void onDiscoveredContact(ContactInfo& contact, bool is_new, uint8_t path_len, const uint8_t* path) = 0;
   virtual ContactInfo* processAck(const uint8_t *data) = 0;
   virtual void onContactPathUpdated(const ContactInfo& contact) = 0;

tools/maint/patch_and_build_hansemesh_fw.sh

@@ -0,0 +1,64 @@
+#!/bin/bash  # Note: switched to bash for process substitution support
+
+export PATH="$HOME/.platformio/penv/bin:$PATH"
+
+LOGFILE="$PWD/meshcore-evo-fw.log"
+FIRMWARE_VERSION="v1.11.0-evo_0.1.3"
+FIRMWARE_BUILD_DATE=$(date '+%d-%b-%Y')
+
+collect_bin_files(){
+    DEST_DIR="./firmwares"
+    mkdir -p "$DEST_DIR"
+    BUILD_DIR=".pio/build"
+
+    if [ ! -d "$BUILD_DIR" ]; then
+        echo "Error: $BUILD_DIR not found. Did you run the build process?"
+        exit 1
+    fi
+
+    echo "Copying firmware files to $DEST_DIR..."
+
+    for target_path in "$BUILD_DIR"/*/; do
+        echo $target_path
+        target_name=$(basename "$target_path")
+    #    if ls "$target_path"*.bin >/dev/null 2>&1; then
+            for bin_file in "$target_path"*firmware*.{uf2,bin,zip}; do
+                filename=$(basename "$bin_file")
+                new_filename="${target_name}_${FIRMWARE_VERSION}_${FIRMWARE_BUILD_DATE}_${filename}"
+                cp "$bin_file" "$DEST_DIR/$new_filename"
+                echo "Done: $new_filename"
+            done
+    #    fi
+    done
+}
+
+# Everything after this line goes to BOTH console and logfile
+exec > >(tee -a "$LOGFILE") 2>&1
+
+echo "-------------------- Build start ----------------"
+date
+echo "-------------------------------------------------"
+
+# apply patches
+# ./tools/maint/apply_patches.sh 1199 1338 1297
+
+# build all repeater firmwares, the will be in .out
+FIRMWARE_VERSION="v1.11_evo" ./build.sh build-repeater-firmwares
+
+# build single firmwares
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware ProMicro_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware RAK_4631_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware heltec_v4_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware Heltec_v3_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware Xiao_nrf52_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware LilyGo_T3S3_sx1262_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware Heltec_t114_without_display_repeater
+#FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware Heltec_t114_repeater
+#collect_bin_files
+
+
+echo "-------------------- Build end ------------------"
+date
+echo "-------------------------------------------------"
+
+#grep -E " SUCCESS | FAILED " hansemesh_fw.log

variants/heltec_v3/platformio.ini

@@ -323,7 +323,7 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=140
+  -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1

variants/ikoka_stick_nrf/platformio.ini

@@ -27,6 +27,7 @@ build_flags = ${nrf52_base.build_flags}
   -D PIN_USER_BTN=0
   -D PIN_WIRE_SCL=7
   -D PIN_WIRE_SDA=6
+  -UENV_INCLUDE_GPS
 lib_deps = ${nrf52_base.lib_deps}
   ${sensor_base.lib_deps}
 

variants/rak3401/RAK3401Board.cpp

@@ -0,0 +1,32 @@
+#include <Arduino.h>
+#include <Wire.h>
+
+#include "RAK3401Board.h"
+
+void RAK3401Board::begin() {
+  NRF52BoardDCDC::begin();
+  pinMode(PIN_VBAT_READ, INPUT);
+#ifdef PIN_USER_BTN
+  pinMode(PIN_USER_BTN, INPUT_PULLUP);
+#endif
+
+#ifdef PIN_USER_BTN_ANA
+  pinMode(PIN_USER_BTN_ANA, INPUT_PULLUP);
+#endif
+
+#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+#endif
+
+  Wire.begin();
+
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, HIGH);
+
+#ifdef P_LORA_PA_EN
+  // Initialize RAK13302 1W LoRa transceiver module PA control pin
+  pinMode(P_LORA_PA_EN, OUTPUT);
+  digitalWrite(P_LORA_PA_EN, LOW);  // Start with PA disabled
+  delay(10);  // Allow PA module to initialize
+#endif
+}

variants/rak3401/RAK3401Board.h

@@ -0,0 +1,70 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+#include <helpers/NRF52Board.h>
+
+// LoRa radio module pins for RAK13302
+#define  P_LORA_SCLK    3
+#define  P_LORA_MISO    29
+#define  P_LORA_MOSI    30
+#define  P_LORA_NSS     26
+#define  P_LORA_DIO_1   10
+#define  P_LORA_BUSY    9
+#define  P_LORA_RESET   4
+#ifndef  P_LORA_PA_EN
+  #define  P_LORA_PA_EN  31
+#endif
+
+//#define PIN_GPS_SDA       13  //GPS SDA pin (output option)
+//#define PIN_GPS_SCL       14  //GPS SCL pin (output option)
+// #define PIN_GPS_TX        16  //GPS TX pin
+// #define PIN_GPS_RX        15  //GPS RX pin
+#define PIN_GPS_1PPS      17  //GPS PPS pin
+#define GPS_BAUD_RATE   9600
+#define GPS_ADDRESS   0x42  //i2c address for GPS
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE   1.8
+
+
+// built-ins
+#define  PIN_VBAT_READ    5
+#define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
+
+#define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
+
+class RAK3401Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+public:
+  RAK3401Board() : NRF52BoardOTA("RAK3401_OTA") {}
+  void begin();
+
+  #define BATTERY_SAMPLES 8
+
+  uint16_t getBattMilliVolts() override {
+    analogReadResolution(12);
+
+    uint32_t raw = 0;
+    for (int i = 0; i < BATTERY_SAMPLES; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / BATTERY_SAMPLES;
+
+    return (ADC_MULTIPLIER * raw) / 4096;
+  }
+
+  const char* getManufacturerName() const override {
+    return "RAK 3401";
+  }
+
+#ifdef P_LORA_PA_EN
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_PA_EN, HIGH);  // Enable PA before transmission
+  }
+
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_PA_EN, LOW);   // Disable PA after transmission to save power
+  }
+#endif
+};

variants/rak3401/platformio.ini

@@ -0,0 +1,127 @@
+[rak3401]
+extends = nrf52_base
+board = rak3401
+board_check = true
+build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/rak3401
+  -D RAK_3401
+  -D RAK13302
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<../variants/rak3401>
+  +<helpers/sensors>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+  sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
+
+[env:RAK_3401_repeater]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3401 1W Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+
+[env:RAK_3401_room_server]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Test Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+
+[env:RAK_3401_companion_radio_usb]
+extends = rak3401
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak3401.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_companion_radio_ble]
+extends = rak3401
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak3401.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_terminal_chat]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=1
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_sensor]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3401 Sensor"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_sensor>

variants/rak3401/target.cpp

@@ -0,0 +1,58 @@
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/ArduinoHelpers.h>
+
+RAK3401Board board;
+
+#ifndef PIN_USER_BTN
+  #define PIN_USER_BTN (-1)
+#endif
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true);
+
+  #if defined(PIN_USER_BTN_ANA)
+  MomentaryButton analog_btn(PIN_USER_BTN_ANA, 1000, 20);
+  #endif
+#endif
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+#if ENV_INCLUDE_GPS
+  #include <helpers/sensors/MicroNMEALocationProvider.h>
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+  EnvironmentSensorManager sensors;
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  return radio.std_init(&SPI);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}

variants/rak3401/target.h

@@ -0,0 +1,30 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <RAK3401Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/sensors/EnvironmentSensorManager.h>
+
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  extern DISPLAY_CLASS display;
+  #include <helpers/ui/MomentaryButton.h>
+  extern MomentaryButton user_btn;
+  #if defined(PIN_USER_BTN_ANA)
+  extern MomentaryButton analog_btn;
+  #endif
+#endif
+
+extern RAK3401Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();

variants/rak3401/variant.cpp

@@ -0,0 +1,52 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] =
+{
+  // P0
+  0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
+  8 , 9 , 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23,
+  24, 25, 26, 27, 28, 29, 30, 31,
+
+  // P1
+  32, 33, 34, 35, 36, 37, 38, 39,
+  40, 41, 42, 43, 44, 45, 46, 47
+};
+
+
+void initVariant()
+{
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
+
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
+
+  // 3V3 Power Rail
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/rak3401/variant.h

@@ -0,0 +1,199 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_RAK3401_
+#define _VARIANT_RAK3401_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (35)
+#define PIN_LED2 (36)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (5)	//(3)
+#define PIN_A1 (31) //(4)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+	static const uint8_t A0 = PIN_A0;
+	static const uint8_t A1 = PIN_A1;
+	static const uint8_t A2 = PIN_A2;
+	static const uint8_t A3 = PIN_A3;
+	static const uint8_t A4 = PIN_A4;
+	static const uint8_t A5 = PIN_A5;
+	static const uint8_t A6 = PIN_A6;
+	static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define WB_I2C1_SDA (13) // SENSOR_SLOT IO_SLOT
+#define WB_I2C1_SCL (14) // SENSOR_SLOT IO_SLOT
+
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+// TXD1 RXD1 on Base Board
+#define PIN_SERIAL1_RX (15)
+#define PIN_SERIAL1_TX (16)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+#define PIN_SPI1_MISO (29)
+#define PIN_SPI1_MOSI (30)
+#define PIN_SPI1_SCK (3)
+
+	static const uint8_t SS = 42;
+	static const uint8_t MOSI = PIN_SPI_MOSI;
+	static const uint8_t MISO = PIN_SPI_MISO;
+	static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (WB_I2C1_SDA)
+#define PIN_WIRE_SCL (WB_I2C1_SCL)
+
+// QSPI Pins
+// QSPI occupied by GPIO's
+#define PIN_QSPI_SCK 3
+#define PIN_QSPI_CS 26
+#define PIN_QSPI_IO0 30
+#define PIN_QSPI_IO1 29
+#define PIN_QSPI_IO2 28
+#define PIN_QSPI_IO3 2
+
+// On-board QSPI Flash
+// No onboard flash
+#define EXTERNAL_FLASH_DEVICES IS25LP080D
+#define EXTERNAL_FLASH_USE_QSPI
+
+#define P_LORA_SCK PIN_SPI1_SCK
+#define P_LORA_MISO PIN_SPI1_MISO
+#define P_LORA_MOSI PIN_SPI1_MOSI
+#define P_LORA_CS 26
+
+#define USE_SX1262
+#define SX126X_CS (26)
+#define SX126X_DIO1 (10)
+#define SX126X_BUSY (9)
+#define SX126X_RESET (4)
+
+#define SX126X_POWER_EN (21)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// enables 3.3V periphery like GPS or IO Module
+// Do not toggle this for GPS power savings
+#define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
+
+// RAK1910 GPS module
+// If using the wisblock GPS module and pluged into Port A on WisBlock base
+// IO1 is hooked to PPS (pin 12 on header) = gpio 17
+// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
+// Therefore must be 1 to keep peripherals powered
+// Power is on the controllable 3V3_S rail
+#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
+
+#define PIN_GPS_RX PIN_SERIAL1_RX
+#define PIN_GPS_TX PIN_SERIAL1_TX
+
+// Battery
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_A0
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define HAS_RTC 1
+
+#define RAK_4631 1
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif