rak4631: set lockout voltage to 0V

# Conflicts:
#	docs/cli_commands.md

.github/workflows/github-pages.yml

@@ -0,0 +1,36 @@
+name: Build and deploy Docs site to GitHub Pages
+
+on:
+  workflow_dispatch:
+  push:
+    branches:
+      - main
+
+permissions:
+  contents: write
+
+jobs:
+  github-pages:
+    runs-on: ubuntu-latest
+    steps:
+
+      - name: Checkout Repo
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          ruby-version: 3.x
+
+      - name: Build
+        run: |
+          pip install mkdocs-material
+          mkdocs build
+
+      - name: Deploy to GitHub Pages
+        uses: peaceiris/actions-gh-pages@v3
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          cname: docs.meshcore.nz
+          publish_dir: ./site
+          publish_branch: 'gh-pages'

.github/workflows/pr-build-check.yml

@@ -0,0 +1,43 @@
+name: PR Build Check
+
+on:
+  pull_request:
+    branches: [main, dev]
+    paths:
+      - 'src/**'
+      - 'examples/**'
+      - 'variants/**'
+      - 'platformio.ini'
+      - '.github/workflows/pr-build-check.yml'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        environment:
+          # ESP32-S3 (most common platform)
+          - Heltec_v3_companion_radio_ble
+          - Heltec_v3_repeater
+          - Heltec_v3_room_server
+          # nRF52
+          - RAK_4631_companion_radio_ble
+          - RAK_4631_repeater
+          - RAK_4631_room_server
+          # RP2040
+          - PicoW_repeater
+          # STM32
+          - wio-e5-mini_repeater
+          # ESP32-C6
+          - LilyGo_Tlora_C6_repeater_
+
+    steps:
+      - name: Clone Repo
+        uses: actions/checkout@v4
+
+      - name: Setup Build Environment
+        uses: ./.github/actions/setup-build-environment
+
+      - name: Build ${{ matrix.environment }}
+        run: pio run -e ${{ matrix.environment }}

CNAME

@@ -0,0 +1 @@
+docs.meshcore.nz

README.md

@@ -99,10 +99,10 @@ Here are some general principals you should try to adhere to:
 
 There are a number of fairly major features in the pipeline, with no particular time-frames attached yet. In very rough chronological order:
 - [X] Companion radio: UI redesign
-- [ ] Repeater + Room Server: add ACL's (like Sensor Node has)
-- [ ] Standardise Bridge mode for repeaters
+- [X] Repeater + Room Server: add ACL's (like Sensor Node has)
+- [X] Standardise Bridge mode for repeaters
 - [ ] Repeater/Bridge: Standardise the Transport Codes for zoning/filtering
-- [ ] Core + Repeater: enhanced zero-hop neighbour discovery
+- [X] Core + Repeater: enhanced zero-hop neighbour discovery
 - [ ] Core: round-trip manual path support
 - [ ] Companion + Apps: support for multiple sub-meshes (and 'off-grid' client repeat mode)
 - [ ] Core + Apps: support for LZW message compression
@@ -115,12 +115,3 @@ There are a number of fairly major features in the pipeline, with no particular
 - Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page.
 - Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz).
 - Join [MeshCore Discord](https://discord.gg/BMwCtwHj5V) to chat with the developers and get help from the community.
-
-## RAK Wireless Board Support in PlatformIO
-
-Before building/flashing the RAK4631 targets in this project, there is, unfortunately, some patching you have to do to your platformIO packages to make it work. There is a guide here on the process:
-   [RAK Wireless: How to Perform Installation of Board Support Package in PlatformIO](https://learn.rakwireless.com/hc/en-us/articles/26687276346775-How-To-Perform-Installation-of-Board-Support-Package-in-PlatformIO)
-
-After building, you will need to convert the output firmware.hex file into a .uf2 file you can copy over to your RAK4631 device (after doing a full erase) by using the command `uf2conv.py -f 0xADA52840 -c firmware.hex` with the python script available from:
-   [GitHub: Microsoft - uf2](https://github.com/Microsoft/uf2/blob/master/utils/uf2conv.py)
-

boards/t_beams3_supreme.json

@@ -41,7 +41,7 @@
     "name": "LilyGo T-Beam supreme (8MB Flash 8MB PSRAM)",
     "upload": {
       "flash_size": "8MB",
-      "maximum_ram_size": 327680,
+      "maximum_ram_size": 8388608,
       "maximum_size": 8388608,
       "require_upload_port": true,
       "speed": 460800

build.sh

@@ -64,6 +64,8 @@ case $1 in
     ;;
 esac
 
+# cache project config json for use in get_platform_for_env()
+PIO_CONFIG_JSON=$(pio project config --json-output)
 
 # $1 should be the string to find (case insensitive)
 get_pio_envs_containing_string() {
@@ -87,6 +89,25 @@ get_pio_envs_ending_with_string() {
   done
 }
 
+# get platform flag for a given environment
+# $1 should be the environment name
+get_platform_for_env() {
+  local env_name=$1
+  echo "$PIO_CONFIG_JSON" | python3 -c "
+import sys, json, re
+data = json.load(sys.stdin)
+for section, options in data:
+    if section == 'env:$env_name':
+        for key, value in options:
+            if key == 'build_flags':
+                for flag in value:
+                    match = re.search(r'(ESP32_PLATFORM|NRF52_PLATFORM|STM32_PLATFORM|RP2040_PLATFORM)', flag)
+                    if match:
+                        print(match.group(1))
+                        sys.exit(0)
+"
+}
+
 # disable all debug logging flags if DISABLE_DEBUG=1 is set
 disable_debug_flags() {
   if [ "$DISABLE_DEBUG" == "1" ]; then
@@ -96,6 +117,8 @@ disable_debug_flags() {
 
 # build firmware for the provided pio env in $1
 build_firmware() {
+  # get env platform for post build actions
+  ENV_PLATFORM=($(get_platform_for_env $1))
 
   # get git commit sha
   COMMIT_HASH=$(git rev-parse --short HEAD)
@@ -126,27 +149,31 @@ build_firmware() {
   # build firmware target
   pio run -e $1
 
-  # build merge-bin for esp32 fresh install
-  if [ -f .pio/build/$1/firmware.bin ]; then
+  # build merge-bin for esp32 fresh install, copy .bins to out folder (e.g: Heltec_v3_room_server-v1.0.0-SHA.bin)
+  if [ "$ENV_PLATFORM" == "ESP32_PLATFORM" ]; then
     pio run -t mergebin -e $1
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware-merged.bin out/${FIRMWARE_FILENAME}-merged.bin 2>/dev/null || true
   fi
 
-  # build .uf2 for nrf52 boards
-  if [[ -f .pio/build/$1/firmware.zip && -f .pio/build/$1/firmware.hex ]]; then
+  # build .uf2 for nrf52 boards, copy .uf2 and .zip to out folder (e.g: RAK_4631_Repeater-v1.0.0-SHA.uf2)
+  if [ "$ENV_PLATFORM" == "NRF52_PLATFORM" ]; then
     python3 bin/uf2conv/uf2conv.py .pio/build/$1/firmware.hex -c -o .pio/build/$1/firmware.uf2 -f 0xADA52840
+    cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
+    cp .pio/build/$1/firmware.zip out/${FIRMWARE_FILENAME}.zip 2>/dev/null || true
   fi
 
-  # copy .bin, .uf2, and .zip to out folder
-  # e.g: Heltec_v3_room_server-v1.0.0-SHA.bin
-  # e.g: RAK_4631_Repeater-v1.0.0-SHA.uf2
+  # for stm32, copy .bin and .hex to out folder
+  if [ "$ENV_PLATFORM" == "STM32_PLATFORM" ]; then
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware.hex out/${FIRMWARE_FILENAME}.hex 2>/dev/null || true
+  fi
 
-  # copy .bin for esp32 boards
-  cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
-  cp .pio/build/$1/firmware-merged.bin out/${FIRMWARE_FILENAME}-merged.bin 2>/dev/null || true
-
-  # copy .zip and .uf2 of nrf52 boards
-  cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
-  cp .pio/build/$1/firmware.zip out/${FIRMWARE_FILENAME}.zip 2>/dev/null || true
+  # for rp2040, copy .bin and .uf2 to out folder
+  if [ "$ENV_PLATFORM" == "RP2040_PLATFORM" ]; then
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
+  fi
 
 }
 

docs/_assets/meshcore_tm.svg

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="100%" height="100%" viewBox="0 0 139 18" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
+    <path d="M3.232,3.582C2.789,3.582 2.368,3.934 2.289,4.369L0.013,16.964C-0.066,17.399 0.229,17.751 0.671,17.751L3.087,17.751C3.529,17.751 3.951,17.399 4.03,16.964L4.935,11.951L6.592,17.293C6.672,17.572 6.923,17.751 7.235,17.751L10.434,17.751C10.746,17.751 11.062,17.572 11.243,17.293L14.835,11.925L13.924,16.964C13.844,17.399 14.14,17.751 14.583,17.751L16.998,17.751C17.44,17.751 17.862,17.399 17.941,16.964L20.217,4.369C20.298,3.934 20.002,3.582 19.56,3.582L16.46,3.582C16.147,3.582 15.831,3.761 15.65,4.04L9.76,12.872C9.668,13.013 9.446,12.975 9.397,12.81L6.976,4.04C6.895,3.761 6.645,3.582 6.332,3.582L3.232,3.582Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M20.853,17.751C20.853,17.751 32.797,17.751 32.797,17.751C33.063,17.751 33.317,17.538 33.364,17.278L33.863,14.504C33.91,14.242 33.733,14.031 33.467,14.031L25.166,14.031C25.077,14.031 25.019,13.96 25.034,13.873L25.281,12.508C25.296,12.421 25.38,12.35 25.469,12.35L32.146,12.35C32.411,12.35 32.665,12.137 32.712,11.877L33.157,9.421C33.204,9.159 33.027,8.949 32.761,8.949L26.085,8.949C25.996,8.949 25.938,8.877 25.953,8.79L26.216,7.328C26.232,7.241 26.316,7.17 26.405,7.17L34.706,7.17C34.971,7.17 35.226,6.957 35.272,6.695L35.756,4.021C35.804,3.761 35.627,3.548 35.361,3.548L23.417,3.548C22.975,3.548 22.551,3.902 22.473,4.337L20.191,16.962C20.114,17.397 20.409,17.751 20.853,17.751Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M45.291,17.749L45.291,17.751L45.705,17.751C47.783,17.751 49.767,16.095 50.136,14.052L50.375,12.727C50.744,10.685 49.359,9.029 47.28,9.029L40.882,9.029C40.617,9.029 40.44,8.818 40.487,8.556L40.649,7.664C40.696,7.402 40.95,7.191 41.215,7.191L49.87,7.191C50.313,7.191 50.735,6.839 50.814,6.404L51.183,4.368C51.262,3.931 50.966,3.579 50.523,3.579L41.063,3.579C38.985,3.579 37,5.235 36.631,7.278L36.37,8.723C36.001,10.767 37.386,12.422 39.465,12.422L45.863,12.422C46.128,12.422 46.305,12.633 46.258,12.895L46.138,13.565C46.091,13.826 45.837,14.037 45.571,14.037L36.675,14.037C36.233,14.037 35.811,14.389 35.732,14.824L35.346,16.962C35.267,17.397 35.562,17.749 36.005,17.749L45.291,17.749Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M67.068,3.575C67.068,3.575 64.393,3.575 64.393,3.575C63.951,3.575 63.529,3.927 63.45,4.361L62.654,8.766C62.639,8.853 62.554,8.923 62.466,8.923L57.282,8.923C57.193,8.923 57.135,8.853 57.15,8.766L57.946,4.361C58.023,3.927 57.73,3.575 57.287,3.575L54.613,3.575C54.17,3.575 53.748,3.927 53.669,4.361L51.392,16.964C51.313,17.399 51.608,17.751 52.05,17.751L54.725,17.751C55.168,17.751 55.589,17.399 55.668,16.964L56.48,12.478C56.495,12.392 56.58,12.32 56.668,12.32L61.852,12.32C61.941,12.32 61.999,12.39 61.984,12.478L61.174,16.964C61.096,17.399 61.391,17.751 61.834,17.751L64.508,17.751C64.951,17.751 65.372,17.399 65.451,16.964L67.729,4.361C67.804,3.927 67.511,3.575 67.068,3.575Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M71.102,17.751C71.102,17.751 78.96,17.751 78.96,17.751C79.402,17.751 79.824,17.399 79.903,16.964L80.288,14.824C80.367,14.389 80.072,14.037 79.629,14.037L72.808,14.037C72.542,14.037 72.365,13.826 72.412,13.565L73.48,7.686C73.527,7.426 73.781,7.213 74.045,7.213L80.866,7.213C81.309,7.213 81.73,6.861 81.81,6.427L82.188,4.335C82.267,3.9 81.971,3.548 81.529,3.548L73.691,3.548C71.618,3.548 69.638,5.197 69.265,7.234L68.011,14.046C67.639,16.091 69.022,17.751 71.102,17.751Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M95.833,3.529C95.833,3.529 87.654,3.529 87.654,3.529C85.576,3.529 83.592,5.186 83.223,7.228L81.99,14.052C81.621,16.094 83.006,17.751 85.084,17.751L93.263,17.751C95.341,17.751 97.326,16.095 97.695,14.052L98.928,7.228C99.297,5.186 97.911,3.529 95.833,3.529ZM93.488,13.567C93.44,13.828 93.186,14.039 92.921,14.039L86.762,14.039C86.496,14.039 86.319,13.828 86.366,13.567L87.434,7.663C87.481,7.402 87.735,7.191 88,7.191L94.157,7.191C94.423,7.191 94.6,7.402 94.553,7.663L93.488,13.567Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M99.884,17.751L102.557,17.751C102.999,17.751 103.421,17.399 103.5,16.965L103.973,14.348C103.988,14.261 104.073,14.19 104.161,14.19L107.397,14.186C107.557,14.186 107.69,14.265 107.756,14.395L109.281,17.37C109.458,17.722 109.78,17.764 110.751,17.749C111.32,17.756 112.184,17.713 113.577,17.713C114.025,17.713 114.3,17.244 114.079,16.853L112.413,13.953C112.37,13.876 112.417,13.772 112.509,13.727C113.795,13.102 114.814,11.889 115.068,10.487L115.649,7.262C116.02,5.218 114.635,3.562 112.557,3.562L102.448,3.562C102.006,3.562 101.584,3.914 101.505,4.349L99.225,16.964C99.146,17.399 99.442,17.751 99.884,17.751L99.884,17.751ZM105.255,7.268C105.27,7.181 105.354,7.11 105.443,7.11L110.674,7.11C111.069,7.11 111.331,7.424 111.261,7.812L110.877,9.933C110.806,10.319 110.431,10.634 110.038,10.634L104.806,10.634C104.718,10.634 104.66,10.564 104.675,10.475L105.255,7.268Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M116.642,17.751C116.642,17.751 128.586,17.751 128.586,17.751C128.851,17.751 129.105,17.538 129.152,17.278L129.651,14.504C129.698,14.242 129.521,14.031 129.256,14.031L120.955,14.031C120.866,14.031 120.808,13.96 120.823,13.873L121.069,12.508C121.084,12.421 121.169,12.35 121.257,12.35L127.934,12.35C128.2,12.35 128.454,12.137 128.501,11.877L128.945,9.421C128.992,9.159 128.815,8.949 128.55,8.949L121.873,8.949C121.785,8.949 121.726,8.877 121.741,8.79L122.005,7.328C122.02,7.241 122.105,7.17 122.193,7.17L130.495,7.17C130.76,7.17 131.014,6.957 131.061,6.695L131.545,4.021C131.592,3.761 131.415,3.548 131.15,3.548L119.206,3.548C118.763,3.548 118.34,3.902 118.261,4.337L115.98,16.962C115.902,17.397 116.198,17.751 116.642,17.751Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M134.674,0C134.674,0 132.059,0 132.059,0C131.965,0 131.877,0.074 131.86,0.166L131.783,0.594C131.766,0.686 131.828,0.76 131.921,0.76L132.745,0.76C132.764,0.76 132.776,0.775 132.773,0.793L132.406,2.819C132.39,2.91 132.452,2.984 132.545,2.984L133.108,2.984C133.201,2.984 133.29,2.91 133.307,2.819L133.673,0.793C133.676,0.775 133.694,0.76 133.713,0.76L134.536,0.76C134.629,0.76 134.718,0.686 134.735,0.594L134.812,0.166C134.828,0.074 134.767,0 134.674,0Z" style="fill:white;fill-rule:nonzero;"/>
+    <path d="M135.278,0.002C135.185,0.002 135.096,0.076 135.079,0.167L134.6,2.819C134.583,2.91 134.646,2.984 134.739,2.984L135.247,2.984C135.34,2.984 135.429,2.91 135.446,2.819L135.636,1.763L135.985,2.888C136.002,2.947 136.055,2.984 136.121,2.984L136.794,2.984C136.86,2.984 136.926,2.947 136.964,2.888L137.72,1.758L137.528,2.819C137.512,2.91 137.574,2.984 137.667,2.984L138.176,2.984C138.269,2.984 138.358,2.91 138.374,2.819L138.853,0.167C138.87,0.076 138.808,0.002 138.715,0.002L138.062,0.002C137.997,0.002 137.93,0.039 137.892,0.098L136.652,1.957C136.633,1.987 136.586,1.979 136.575,1.944L136.066,0.098C136.049,0.039 135.996,0.002 135.93,0.002L135.278,0.002Z" style="fill:white;fill-rule:nonzero;"/>
+</svg>

docs/_stylesheets/extra.css

@@ -0,0 +1,16 @@
+:root {
+    --md-primary-fg-color: #1F2937;
+    --md-primary-fg-color--light: #1F2937;
+    --md-primary-fg-color--dark: #1F2937;
+    --md-accent-fg-color: #1F2937;
+}
+
+/* hide git repo version */
+.md-source__fact--version {
+    display: none;
+}
+
+/* underline links */
+.md-typeset a {
+    text-decoration: underline;
+}

docs/cli_commands.md

@@ -1,4 +1,6 @@
-# MeshCore Repeater & Room Server CLI Commands
+# CLI Commands
+
+This document provides an overview of CLI commands that can be sent to MeshCore Repeaters, Room Servers and Sensors.
 
 ## Navigation
 
@@ -51,7 +53,7 @@
 - `time <epoch_seconds>`
 
 **Parameters:**
-- `epoc_seconds`: Unix epoc time
+- `epoch_seconds`: Unix epoch time
 
 ---
 
@@ -134,7 +136,7 @@
 
 ---
 
-### End capture of rx log to node sotrage
+### End capture of rx log to node storage
 **Usage:** `log stop`
 
 ---
@@ -198,7 +200,7 @@
 
 **Default:** Varies by board
 
-**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Referr to the node's manual for the correct setting to use. **Setting a value too high may violate the laws in your country.**
+**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Refer to the node's manual for the correct setting to use. **Setting a value too high may violate the laws in your country.**
 
 ---
 
@@ -228,6 +230,7 @@
 **Default:** `869.525`
 
 **Note:** Requires reboot to apply
+**Serial Only:** `set freq <frequency>`
 
 ### System
 
@@ -291,19 +294,18 @@
 
 ---
 
-#### View or change this node's admin password
+#### Change this node's admin password
 **Usage:**
-- `get password`
-- `set password <password>`
+- `password <new_password>`
 
 **Parameters:**
-- `password`: Admin password
+- `new_password`: New admin password
 
 **Set by build flag:** `ADMIN_PASSWORD`
 
 **Default:** `password`
 
-**Note:** Echoed back for confirmation
+**Note:** Command reply echoes the updated password for confirmation.
 
 **Note:** Any node using this password will be added to the admin ACL list.
 
@@ -642,7 +644,7 @@
 **Usage:** 
 - `region`
 
-**Serial Only:** Yes
+**Serial Only:** For firmware older than 1.12.0
 
 ---
 
@@ -768,7 +770,7 @@ region save
 - `gps advert <policy>`
 
 **Parameters:** 
-- `policy`: `none`|`shared`|`prefs` 
+- `policy`: `none`|`share`|`prefs` 
   - `none`: don't include location in adverts
   - `share`: share gps location (from SensorManager)
   - `prefs`: location stored in node's lat and lon settings

docs/companion_protocol.md

@@ -1,26 +1,42 @@
-# MeshCore Device Communication Protocol Guide
+# Companion Protocol
 
-This document provides a comprehensive guide for communicating with MeshCore devices over Bluetooth Low Energy (BLE). It is platform-agnostic and can be used for Android, iOS, Python, JavaScript, or any other platform that supports BLE.
+- **Last Updated**: 2026-01-03
+- **Protocol Version**: Companion Firmware v1.12.0+
 
-## ⚠️ Important Security Note
+> NOTE: This document is still in development. Some information may be inaccurate.
 
-**All secrets, hashes, and cryptographic values shown in this guide are EXAMPLE VALUES ONLY and are NOT real secrets.** 
+This document provides a comprehensive guide for communicating with MeshCore devices over Bluetooth Low Energy (BLE).
 
-- The secret `9b647d242d6e1c5883fde0c5cf5c4c5e` used in examples is a made-up example value
-- All hex values, public keys, and hashes in examples are for demonstration purposes only
-- **Never use example secrets in production** - always generate new cryptographically secure random secrets
-- This guide is for protocol documentation only - implement proper security practices in your actual implementation
+It is platform-agnostic and can be used for Android, iOS, Python, JavaScript, or any other platform that supports BLE.
+
+## Official Libraries
+
+Please see the following repos for existing MeshCore Companion Protocol libraries.
+
+- JavaScript: [https://github.com/meshcore-dev/meshcore.js](https://github.com/meshcore-dev/meshcore.js)
+- Python: [https://github.com/meshcore-dev/meshcore_py](https://github.com/meshcore-dev/meshcore_py)
+
+## Important Security Note
+
+All secrets, hashes, and cryptographic values shown in this guide are example values only.
+
+- All hex values, public keys and hashes are for demonstration purposes only
+- Never use example secrets in production
+- Always generate new cryptographically secure random secrets
+- Please implement proper security practices in your implementation
+- This guide is for protocol documentation only
 
 ## Table of Contents
 
 1. [BLE Connection](#ble-connection)
-2. [Protocol Overview](#protocol-overview)
+2. [Packet Structure](#packet-structure)
 3. [Commands](#commands)
 4. [Channel Management](#channel-management)
-5. [Secret Generation and QR Codes](#secret-generation-and-qr-codes)
-6. [Message Handling](#message-handling)
-7. [Response Parsing](#response-parsing)
-8. [Example Implementation Flow](#example-implementation-flow)
+5. [Message Handling](#message-handling)
+6. [Response Parsing](#response-parsing)
+7. [Example Implementation Flow](#example-implementation-flow)
+8. [Best Practices](#best-practices)
+9. [Troubleshooting](#troubleshooting)
 
 ---
 
@@ -28,181 +44,111 @@ This document provides a comprehensive guide for communicating with MeshCore dev
 
 ### Service and Characteristics
 
-MeshCore devices expose a BLE service with the following UUIDs:
+MeshCore Companion devices expose a BLE service with the following UUIDs:
 
-- **Service UUID**: `0000ff00-0000-1000-8000-00805f9b34fb`
-- **RX Characteristic** (Device → Client): `0000ff01-0000-1000-8000-00805f9b34fb`
-- **TX Characteristic** (Client → Device): `0000ff02-0000-1000-8000-00805f9b34fb`
+- **Service UUID**: `6E400001-B5A3-F393-E0A9-E50E24DCCA9E`
+- **RX Characteristic** (App → Firmware): `6E400002-B5A3-F393-E0A9-E50E24DCCA9E`
+- **TX Characteristic** (Firmware → App): `6E400003-B5A3-F393-E0A9-E50E24DCCA9E`
 
 ### Connection Steps
 
 1. **Scan for Devices**
-   - Scan for BLE devices advertising the MeshCore service UUID
-   - Filter by device name (typically contains "MeshCore" or similar)
-   - Note the device MAC address for reconnection
+    - Scan for BLE devices advertising the MeshCore Service UUID
+    - Optionally filter by device name (typically contains "MeshCore" prefix)
+    - Note the device MAC address for reconnection
 
 2. **Connect to GATT**
-   - Connect to the device using the discovered MAC address
-   - Wait for connection to be established
+    - Connect to the device using the discovered MAC address
+    - Wait for connection to be established
 
 3. **Discover Services and Characteristics**
-   - Discover the service with UUID `0000ff00-0000-1000-8000-00805f9b34fb`
-   - Discover RX characteristic (`0000ff01-...`) for receiving data
-   - Discover TX characteristic (`0000ff02-...`) for sending commands
+    - Discover the service with UUID `6E400001-B5A3-F393-E0A9-E50E24DCCA9E`
+    - Discover the RX characteristic `6E400002-B5A3-F393-E0A9-E50E24DCCA9E`
+        - Your app writes to this, the firmware reads from this
+    - Discover the TX characteristic `6E400003-B5A3-F393-E0A9-E50E24DCCA9E`
+        - The firmware writes to this, your app reads from this
 
 4. **Enable Notifications**
-   - Subscribe to notifications on the RX characteristic
-   - Enable notifications/indications to receive data from the device
-   - On some platforms, you may need to write to a descriptor (e.g., `0x2902`) with value `0x01` or `0x02`
+    - Subscribe to notifications on the TX characteristic to receive data from the firmware
 
-5. **Send AppStart Command**
-   - Send the app start command (see [Commands](#commands)) to initialize communication
-   - Wait for OK response before sending other commands
-
-### Connection State Management
-
-- **Disconnected**: No connection established
-- **Connecting**: Connection attempt in progress
-- **Connected**: GATT connection established, ready for commands
-- **Error**: Connection failed or lost
+5. **Send Initial Commands**
+    - Send `CMD_APP_START` to identify your app to firmware and get radio settings
+    - Send `CMD_DEVICE_QEURY` to fetch device info and negotiate supported protocol versions
+    - Send `CMD_SET_DEVICE_TIME` to set the firmware clock
+    - Send `CMD_GET_CONTACTS` to fetch all contacts
+    - Send `CMD_GET_CHANNEL` multiple times to fetch all channel slots
+    - Send `CMD_SYNC_NEXT_MESSAGE` to fetch the next message stored in firmware
+    - Setup listeners for push codes, such as `PUSH_CODE_MSG_WAITING` or `PUSH_CODE_ADVERT`
+    - See [Commands](#commands) section for information on other commands
 
 **Note**: MeshCore devices may disconnect after periods of inactivity. Implement auto-reconnect logic with exponential backoff.
 
 ### BLE Write Type
 
-When writing commands to the TX characteristic, specify the write type:
+When writing commands to the RX characteristic, specify the write type:
 
 - **Write with Response** (default): Waits for acknowledgment from device
 - **Write without Response**: Faster but no acknowledgment
 
 **Platform-specific**:
+
 - **Android**: Use `BluetoothGattCharacteristic.WRITE_TYPE_DEFAULT` or `WRITE_TYPE_NO_RESPONSE`
 - **iOS**: Use `CBCharacteristicWriteType.withResponse` or `.withoutResponse`
 - **Python (bleak)**: Use `write_gatt_char()` with `response=True` or `False`
 
-**Recommendation**: Use write with response for reliability, especially for critical commands like `SET_CHANNEL`.
+**Recommendation**: Use write with response for reliability.
 
 ### MTU (Maximum Transmission Unit)
 
 The default BLE MTU is 23 bytes (20 bytes payload). For larger commands like `SET_CHANNEL` (66 bytes), you may need to:
 
 1. **Request Larger MTU**: Request MTU of 512 bytes if supported
-   - Android: `gatt.requestMtu(512)`
-   - iOS: `peripheral.maximumWriteValueLength(for:)`
-   - Python (bleak): MTU is negotiated automatically
+    - Android: `gatt.requestMtu(512)`
+    - iOS: `peripheral.maximumWriteValueLength(for:)`
+    - Python (bleak): MTU is negotiated automatically
 
-2. **Handle Chunking**: If MTU is small, commands may be split automatically by the BLE stack
-   - Ensure all chunks are sent before waiting for response
-   - Responses may also arrive in chunks - buffer until complete
-
-### Command Sequencing and Timing
+### Command Sequencing
 
 **Critical**: Commands must be sent in the correct sequence:
 
 1. **After Connection**:
-   - Wait for GATT connection established
-   - Wait for services/characteristics discovered
-   - Wait for notifications enabled (descriptor write complete)
-   - **Wait 200-1000ms** for device to be ready (some devices need initialization time)
-   - Send `APP_START` command
-   - **Wait for `PACKET_OK` response** before sending any other commands
+    - Wait for BLE connection to be established
+    - Wait for services/characteristics to be discovered
+    - Wait for notifications to be enabled
+    - Now you can safely send commands to the firmware
 
 2. **Command-Response Matching**:
-   - Send one command at a time
-   - Wait for response before sending next command
-   - Use timeout (typically 5 seconds)
-   - Match response to command by:
-     - Command type (e.g., `GET_CHANNEL` → `PACKET_CHANNEL_INFO`)
-     - Sequence number (if implemented)
-     - First-in-first-out queue
-
-3. **Timing Considerations**:
-   - Minimum delay between commands: 50-100ms
-   - After `APP_START`: Wait 200-500ms before next command
-   - After `SET_CHANNEL`: Wait 500-1000ms for channel to be created
-   - After enabling notifications: Wait 200ms before sending commands
-
-**Example Flow**:
-```python
-# 1. Connect and discover
-await connect_to_device(device)
-await discover_services()
-await enable_notifications()
-await asyncio.sleep(0.2)  # Wait for device ready
-
-# 2. Send AppStart
-send_command(build_app_start())
-response = await wait_for_response(PACKET_OK, timeout=5.0)
-if response.type != PACKET_OK:
-    raise Exception("AppStart failed")
-
-# 3. Now safe to send other commands
-await asyncio.sleep(0.1)  # Small delay between commands
-send_command(build_device_query())
-response = await wait_for_response(PACKET_DEVICE_INFO, timeout=5.0)
-```
+    - Send one command at a time
+    - Wait for a response before sending another command
+    - Use a timeout (typically 5 seconds)
+    - Match response to command by type (e.g: `CMD_GET_CHANNEL` → `RESP_CODE_CHANNEL_INFO`)
 
 ### Command Queue Management
 
-For reliable operation, implement a command queue:
+For reliable operation, implement a command queue.
 
-1. **Queue Structure**:
-   - Maintain a queue of pending commands
-   - Track which command is currently waiting for response
-   - Only send next command after receiving response or timeout
+**Queue Structure**:
 
-2. **Implementation**:
-```python
-class CommandQueue:
-    def __init__(self):
-        self.queue = []
-        self.waiting_for_response = False
-        self.current_command = None
-    
-    async def send_command(self, command, expected_response_type, timeout=5.0):
-        if self.waiting_for_response:
-            # Queue the command
-            self.queue.append((command, expected_response_type, timeout))
-            return
-        
-        self.waiting_for_response = True
-        self.current_command = (command, expected_response_type, timeout)
-        
-        # Send command
-        await write_to_tx_characteristic(command)
-        
-        # Wait for response
-        response = await wait_for_response(expected_response_type, timeout)
-        
-        self.waiting_for_response = False
-        self.current_command = None
-        
-        # Process next queued command
-        if self.queue:
-            next_cmd, next_type, next_timeout = self.queue.pop(0)
-            await self.send_command(next_cmd, next_type, next_timeout)
-        
-        return response
-```
+- Maintain a queue of pending commands
+- Track which command is currently waiting for a response
+- Only send next command after receiving response or timeout
 
-3. **Error Handling**:
-   - On timeout: Clear current command, process next in queue
-   - On error: Log error, clear current command, process next
-   - Don't block queue on single command failure
+**Error Handling**:
+
+- On timeout, clear current command, process next in queue
+- On error, log error, clear current command, process next
 
 ---
 
-## Protocol Overview
+## Packet Structure
 
 The MeshCore protocol uses a binary format with the following structure:
 
-- **Commands**: Sent from client to device via TX characteristic
-- **Responses**: Received from device via RX characteristic (notifications)
-- **All multi-byte integers**: Little-endian byte order
+- **Commands**: Sent from app to firmware via RX characteristic
+- **Responses**: Received from firmware via TX characteristic notifications
+- **All multi-byte integers**: Little-endian byte order (except CayenneLPP which is Big-endian)
 - **All strings**: UTF-8 encoding
 
-### Packet Structure
-
 Most packets follow this format:
 ```
 [Packet Type (1 byte)] [Data (variable length)]
@@ -283,7 +229,7 @@ Byte 1: Channel Index (0-7)
 Byte 0: 0x20
 Byte 1: Channel Index (0-7)
 Bytes 2-33: Channel Name (32 bytes, UTF-8, null-padded)
-Bytes 34-65: Secret (32 bytes, see [Secret Generation](#secret-generation))
+Bytes 34-65: Secret (32 bytes)
 ```
 
 **Total Length**: 66 bytes
@@ -298,7 +244,7 @@ Bytes 34-65: Secret (32 bytes, see [Secret Generation](#secret-generation))
 - Padded with null bytes (0x00) if shorter
 
 **Secret Field** (32 bytes):
-- For **private channels**: 32-byte secret (see [Secret Generation](#secret-generation))
+- For **private channels**: 32-byte secret
 - For **public channels**: All zeros (0x00)
 
 **Example** (create channel "YourChannelName" at index 1 with secret):
@@ -380,170 +326,33 @@ Byte 0: 0x14
 
 ### Channel Types
 
-1. **Public Channels** (Index 0)
-   - No secret required
-   - Anyone with the channel name can join
-   - Use for open communication
-
-2. **Private Channels** (Indices 1-7)
-   - Require a 16-byte secret
-   - Secret is expanded to 32 bytes using SHA-512 (see [Secret Generation](#secret-generation))
-   - Only devices with the secret can access the channel
+1. **Public Channel**
+    - Uses a publicly known 16-byte key: `8b3387e9c5cdea6ac9e5edbaa115cd72`
+    - Anyone can join this channel, messages should be considered public
+    - Used as the default public group chat
+2. **Hashtag Channels**
+    - Uses a secret key derived from the channel name
+    - It is the first 16 bytes of `sha256("#test")`
+    - For example hashtag channel `#test` has the key: `9cd8fcf22a47333b591d96a2b848b73f`
+    - Used as a topic based public group chat, separate from the default public channel
+3. **Private Channels**
+    - Uses a randomly generated 16-byte secret key
+    - Messages should be considered private between those that know the secret
+    - Users should keep the key secret, and only share with those you want to communicate with
+    - Used as a secure private group chat
 
 ### Channel Lifecycle
 
-1. **Create Channel**:
-   - Choose an available index (1-7 for private channels)
-   - Generate or provide a 16-byte secret
-   - Send `SET_CHANNEL` command with name and secret
-   - **Store the secret locally** (device does not return it)
-
-2. **Query Channel**:
-   - Send `GET_CHANNEL` command with channel index
-   - Parse `PACKET_CHANNEL_INFO` response
-   - Note: Secret will be null in response (security feature)
-
+1. **Set Channel**:
+    - Fetch all channel slots, and find one with empty name and all-zero secret
+    - Generate or provide a 16-byte secret
+    - Send `CMD_SET_CHANNEL` with name and secret
+2. **Get Channel**:
+    - Send `CMD_GET_CHANNEL` with channel index
+    - Parse `RESP_CODE_CHANNEL_INFO` response
 3. **Delete Channel**:
-   - Send `SET_CHANNEL` command with empty name and all-zero secret
-   - Or overwrite with a new channel
-
-### Channel Index Management
-
-- **Index 0**: Reserved for public channels
-- **Indices 1-7**: Available for private channels
-- If a channel exists at index 0 but should be private, migrate it to index 1-7
-
----
-
-## Secret Generation and QR Codes
-
-### Secret Generation
-
-For private channels, generate a cryptographically secure 16-byte secret:
-
-**Pseudocode**:
-```python
-import secrets
-
-# Generate 16 random bytes
-secret_bytes = secrets.token_bytes(16)
-
-# Convert to hex string for storage/sharing
-secret_hex = secret_bytes.hex()  # 32 hex characters
-```
-
-**Important**: Use a cryptographically secure random number generator (CSPRNG). Do not use predictable values.
-
-### Secret Expansion
-
-When sending the secret to the device via `SET_CHANNEL`, the 16-byte secret must be expanded to 32 bytes:
-
-**Process**:
-1. Take the 16-byte secret
-2. Compute SHA-512 hash: `hash = SHA-512(secret)`
-3. Use the first 32 bytes of the hash as the secret field in the command
-
-**Pseudocode**:
-```python
-import hashlib
-
-secret_16_bytes = ...  # Your 16-byte secret
-sha512_hash = hashlib.sha512(secret_16_bytes).digest()  # 64 bytes
-secret_32_bytes = sha512_hash[:32]  # First 32 bytes
-```
-
-This matches MeshCore's ED25519 key expansion method.
-
-### QR Code Format
-
-QR codes for sharing channel secrets use the following format:
-
-**URL Scheme**:
-```
-meshcore://channel/add?name=<ChannelName>&secret=<32HexChars>
-```
-
-**Parameters**:
-- `name`: Channel name (URL-encoded if needed)
-- `secret`: 32-character hexadecimal representation of the 16-byte secret
-
-**Example** (using example secret - NOT a real secret):
-```
-meshcore://channel/add?name=YourChannelName&secret=9b647d242d6e1c5883fde0c5cf5c4c5e
-```
-
-**Alternative Formats** (for backward compatibility):
-
-1. **JSON Format**:
-```json
-{
-  "name": "YourChannelName",
-  "secret": "9b647d242d6e1c5883fde0c5cf5c4c5e"
-}
-```
-*Note: The secret value above is an example only - generate your own secure random secret.*
-
-2. **Plain Hex** (32 hex characters):
-```
-9b647d242d6e1c5883fde0c5cf5c4c5e
-```
-*Note: This is an example hex value - always generate your own cryptographically secure random secret.*
-
-### QR Code Generation
-
-**Steps**:
-1. Generate or use existing 16-byte secret
-2. Convert to 32-character hex string (lowercase)
-3. URL-encode the channel name
-4. Construct the `meshcore://` URL
-5. Generate QR code from the URL string
-
-**Example** (Python with `qrcode` library):
-```python
-import qrcode
-from urllib.parse import quote
-import secrets
-
-channel_name = "YourChannelName"
-# Generate a real cryptographically secure secret (NOT the example value)
-secret_bytes = secrets.token_bytes(16)
-secret_hex = secret_bytes.hex()  # This will be a different value each time
-
-# Example value shown in documentation: "9b647d242d6e1c5883fde0c5cf5c4c5e"
-# DO NOT use the example value - always generate your own!
-
-url = f"meshcore://channel/add?name={quote(channel_name)}&secret={secret_hex}"
-qr = qrcode.QRCode(version=1, box_size=10, border=5)
-qr.add_data(url)
-qr.make(fit=True)
-img = qr.make_image(fill_color="black", back_color="white")
-img.save("channel_qr.png")
-```
-
-### QR Code Scanning
-
-When scanning a QR code:
-
-1. **Parse URL Format**:
-   - Extract `name` and `secret` query parameters
-   - Validate secret is 32 hex characters
-
-2. **Parse JSON Format**:
-   - Parse JSON object
-   - Extract `name` and `secret` fields
-
-3. **Parse Plain Hex**:
-   - Extract only hex characters (0-9, a-f, A-F)
-   - Validate length is 32 characters
-   - Convert to lowercase
-
-4. **Validate Secret**:
-   - Must be exactly 32 hex characters (16 bytes)
-   - Convert hex string to bytes
-
-5. **Create Channel**:
-   - Use extracted name and secret
-   - Send `SET_CHANNEL` command
+    - Send `CMD_SET_CHANNEL` with empty name and all-zero secret
+    - Or overwrite with a new channel
 
 ---
 
@@ -693,28 +502,28 @@ Use the `SEND_CHANNEL_MESSAGE` command (see [Commands](#commands)).
 
 ### Packet Types
 
-| Value | Name | Description |
-|-------|------|-------------|
-| 0x00 | PACKET_OK | Command succeeded |
-| 0x01 | PACKET_ERROR | Command failed |
-| 0x02 | PACKET_CONTACT_START | Start of contact list |
-| 0x03 | PACKET_CONTACT | Contact information |
-| 0x04 | PACKET_CONTACT_END | End of contact list |
-| 0x05 | PACKET_SELF_INFO | Device self-information |
-| 0x06 | PACKET_MSG_SENT | Message sent confirmation |
-| 0x07 | PACKET_CONTACT_MSG_RECV | Contact message (standard) |
-| 0x08 | PACKET_CHANNEL_MSG_RECV | Channel message (standard) |
-| 0x09 | PACKET_CURRENT_TIME | Current time response |
-| 0x0A | PACKET_NO_MORE_MSGS | No more messages available |
-| 0x0C | PACKET_BATTERY | Battery level |
-| 0x0D | PACKET_DEVICE_INFO | Device information |
-| 0x10 | PACKET_CONTACT_MSG_RECV_V3 | Contact message (V3 with SNR) |
-| 0x11 | PACKET_CHANNEL_MSG_RECV_V3 | Channel message (V3 with SNR) |
-| 0x12 | PACKET_CHANNEL_INFO | Channel information |
-| 0x80 | PACKET_ADVERTISEMENT | Advertisement packet |
-| 0x82 | PACKET_ACK | Acknowledgment |
-| 0x83 | PACKET_MESSAGES_WAITING | Messages waiting notification |
-| 0x88 | PACKET_LOG_DATA | RF log data (can be ignored) |
+| Value | Name                       | Description                   |
+|-------|----------------------------|-------------------------------|
+| 0x00  | PACKET_OK                  | Command succeeded             |
+| 0x01  | PACKET_ERROR               | Command failed                |
+| 0x02  | PACKET_CONTACT_START       | Start of contact list         |
+| 0x03  | PACKET_CONTACT             | Contact information           |
+| 0x04  | PACKET_CONTACT_END         | End of contact list           |
+| 0x05  | PACKET_SELF_INFO           | Device self-information       |
+| 0x06  | PACKET_MSG_SENT            | Message sent confirmation     |
+| 0x07  | PACKET_CONTACT_MSG_RECV    | Contact message (standard)    |
+| 0x08  | PACKET_CHANNEL_MSG_RECV    | Channel message (standard)    |
+| 0x09  | PACKET_CURRENT_TIME        | Current time response         |
+| 0x0A  | PACKET_NO_MORE_MSGS        | No more messages available    |
+| 0x0C  | PACKET_BATTERY             | Battery level                 |
+| 0x0D  | PACKET_DEVICE_INFO         | Device information            |
+| 0x10  | PACKET_CONTACT_MSG_RECV_V3 | Contact message (V3 with SNR) |
+| 0x11  | PACKET_CHANNEL_MSG_RECV_V3 | Channel message (V3 with SNR) |
+| 0x12  | PACKET_CHANNEL_INFO        | Channel information           |
+| 0x80  | PACKET_ADVERTISEMENT       | Advertisement packet          |
+| 0x82  | PACKET_ACK                 | Acknowledgment                |
+| 0x83  | PACKET_MESSAGES_WAITING    | Messages waiting notification |
+| 0x88  | PACKET_LOG_DATA            | RF log data (can be ignored)  |
 
 ### Parsing Responses
 
@@ -1081,33 +890,6 @@ def on_notification_received(data):
         send_command(tx_char, build_get_message())
 ```
 
-### QR Code Sharing
-
-```python
-import secrets
-from urllib.parse import quote
-
-# 1. Generate QR code data
-channel_name = "YourChannelName"
-# Generate a real secret (NOT the example value from documentation)
-secret_bytes = secrets.token_bytes(16)
-secret_hex = secret_bytes.hex()
-
-# Example value in documentation: "9b647d242d6e1c5883fde0c5cf5c4c5e"
-# DO NOT use example values - always generate your own secure random secrets!
-
-url = f"meshcore://channel/add?name={quote(channel_name)}&secret={secret_hex}"
-
-# 2. Generate QR code image
-qr = qrcode.QRCode(version=1, box_size=10, border=5)
-qr.add_data(url)
-qr.make(fit=True)
-img = qr.make_image(fill_color="black", back_color="white")
-
-# 3. Display or save QR code
-img.save("channel_qr.png")
-```
-
 ---
 
 ## Best Practices
@@ -1121,81 +903,37 @@ img.save("channel_qr.png")
    - Always use cryptographically secure random number generators
    - Store secrets securely (encrypted storage)
    - Never log or transmit secrets in plain text
-   - Device does not return secrets - you must store them locally
 
 3. **Message Handling**:
-   - Poll `GET_MESSAGE` periodically or when `PACKET_MESSAGES_WAITING` is received
-   - Handle message chunking for long messages (>133 characters)
-   - Implement message deduplication to avoid processing the same message twice
+   - Send `CMD_SYNC_NEXT_MESSAGE` when `PUSH_CODE_MSG_WAITING` is received
+   - Implement message deduplication to avoid display the same message twice
 
-4. **Error Handling**:
+4. **Channel Management**:
+    - Fetch all channel slots even if you encounter an empty slot
+    - Ideally save new channels into the first empty slot
+
+5. **Error Handling**:
    - Implement timeouts for all commands (typically 5 seconds)
-   - Handle `PACKET_ERROR` responses appropriately
-   - Log errors for debugging but don't expose sensitive information
-
-5. **Channel Management**:
-   - Avoid using channel index 0 for private channels
-   - Migrate channels from index 0 to 1-7 if needed
-   - Query channels after connection to discover existing channels
-
----
-
-## Platform-Specific Notes
-
-### Android
-- Use `BluetoothGatt` API
-- Request `BLUETOOTH_CONNECT` and `BLUETOOTH_SCAN` permissions (Android 12+)
-- Enable notifications by writing to descriptor `0x2902` with value `0x01` or `0x02`
-
-### iOS
-- Use `CoreBluetooth` framework
-- Implement `CBPeripheralDelegate` for notifications
-- Request Bluetooth permissions in Info.plist
-
-### Python
-- Use `bleak` library for cross-platform BLE support
-- Handle async/await for BLE operations
-- Use `asyncio` for command-response patterns
-
-### JavaScript/Node.js
-- Use `noble` or `@abandonware/noble` for BLE
-- Handle callbacks or promises for async operations
-- Use `Buffer` for binary data manipulation
+   - Handle `RESP_CODE_ERR` responses appropriately
 
 ---
 
 ## Troubleshooting
 
 ### Connection Issues
+
 - **Device not found**: Ensure device is powered on and advertising
 - **Connection timeout**: Check Bluetooth permissions and device proximity
 - **GATT errors**: Ensure proper service/characteristic discovery
 
 ### Command Issues
+
 - **No response**: Verify notifications are enabled, check connection state
-- **Error responses**: Verify command format, check channel index validity
-- **Timeout**: Increase timeout value or check device responsiveness
+- **Error responses**: Verify command format and check error code
+- **Timeout**: Increase timeout value or try again
 
 ### Message Issues
+
 - **Messages not received**: Poll `GET_MESSAGE` command periodically
-- **Duplicate messages**: Implement message deduplication using timestamps/hashes
-- **Message truncation**: Split long messages into chunks
-
-### Secret/Channel Issues
-- **Secret not working**: Verify secret expansion (SHA-512) is correct
-- **Channel not found**: Query channels after connection to discover existing channels
-- **Channel index 0**: Migrate to index 1-7 for private channels
-
----
-
-## References
-
-- MeshCore Python implementation: `meshcore_py-main/src/meshcore/`
-- BLE GATT Specification: Bluetooth SIG Core Specification
-- ED25519 Key Expansion: RFC 8032
-
----
-
-**Last Updated**: 2025-01-01
-**Protocol Version**: Based on MeshCore v1.36.0+
-
+- **Duplicate messages**: Implement message deduplication using timestamp/content as a unique id
+- **Message truncation**: Send long messages as separate shorter messages

docs/docs.md

@@ -0,0 +1,13 @@
+# Local Documentation
+
+This document explains how to build and view the MeshCore documentation locally.
+
+## Building and viewing Docs
+
+```
+pip install mkdocs
+pip install mkdocs-material
+```
+
+- `mkdocs serve` - Start the live-reloading docs server.
+- `mkdocs build` - Build the documentation site.

docs/faq.md

@@ -1,12 +1,7 @@
-**MeshCore-FAQ**<!-- omit from toc -->
+# Frequently Asked Questions
+
 A list of frequently-asked questions and answers for MeshCore
 
-The current version of this MeshCore FAQ is at https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md.  
-This MeshCore FAQ is also mirrored at https://github.com/LitBomb/MeshCore-FAQ and might have newer updates if pull requests on Scott's MeshCore repo are not approved yet.
-
-author: https://github.com/LitBomb<!-- omit from toc -->
----
-
 - [1. Introduction](#1-introduction)
   - [1.1. Q: What is MeshCore?](#11-q-what-is-meshcore)
   - [1.2. Q: What do you need to start using MeshCore?](#12-q-what-do-you-need-to-start-using-meshcore)
@@ -26,6 +21,10 @@ author: https://github.com/LitBomb<!-- omit from toc -->
   - [3.2. Q: Do I need to set the location for a repeater?](#32-q-do-i-need-to-set-the-location-for-a-repeater)
   - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server)
   - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server)
+  - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key)
+  - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh.  How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing)
+  - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios.  What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do)
+  - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh)
 - [4. T-Deck Related](#4-t-deck-related)
   - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro)
   - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode)
@@ -56,27 +55,48 @@ author: https://github.com/LitBomb<!-- omit from toc -->
   - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map)
   - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio)
   - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore)
-    - [5.14.1. meshcoremqtt](#5141-meshcoremqtt)
-    - [5.14.2. MeshCore for Home Assistant](#5142-meshcore-for-home-assistant)
-    - [5.14.3. Python MeshCore](#5143-python-meshcore)
-    - [5.14.4. meshcore-cli](#5144-meshcore-cli)
-    - [5.14.5. meshcore.js](#5145-meshcorejs)
+    - [5.14.1. overview](#5141-overview)
+      - [5.14.1.1. awesome-meshcore](#51411-awesome-meshcore)
+    - [5.14.2. programming libraries, command line software](#5142-programming-libraries-command-line-software)
+      - [5.14.2.1. meshcoremqtt](#51421-meshcoremqtt)
+      - [5.14.2.2. MeshCore for Home Assistant](#51422-meshcore-for-home-assistant)
+      - [5.14.2.3. Python MeshCore](#51423-python-meshcore)
+      - [5.14.2.4. meshcore-cli](#51424-meshcore-cli)
+      - [5.14.2.5. meshcore.js](#51425-meshcorejs)
+      - [5.14.2.6. pyMC\_core](#51426-pymc_core)
+      - [5.14.2.7. MeshCore Packet Decoder](#51427-meshcore-packet-decoder)
+      - [5.14.2.8. meshcore-pi](#51428-meshcore-pi)
+      - [5.14.2.9. pyMC\_Repeater](#51429-pymc_repeater)
+      - [5.14.2.10. MeshCore map auto uploader](#514210-MeshCore-map-auto-uploader)
+    - [5.14.3. apps, graphical software](#5143-apps-graphical-software)
+      - [5.14.3.1. meshcore-open](#51431-meshcore-open)
+    - [5.14.4. firmwares](#5144-firmwares)
+      - [5.14.4.1. MeshCore-Cardputer-ADV](#51441-MeshCore-Cardputer-ADV)
+      - [5.14.4.2. LunarCore](#51442-LunarCore)
+      - [5.14.4.3. MC-Term](#51443-MC-Term)
+      - [5.14.4.4. Meck](#51444-Meck)
+      - [5.14.4.5. Meshcore for Wio Tracker L1 Pro](#51445-Meshcore-for-Wio-Tracker-L1-Pro)
+    - [5.14.5. online services](#5145-online-services)
+  - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac)
+  - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems)
 - [6. Troubleshooting](#6-troubleshooting)
   - [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago)
   - [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed)
   - [6.3. Q: How to connect to a repeater via BLE (Bluetooth)?](#63-q-how-to-connect-to-a-repeater-via-ble-bluetooth)
   - [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth)
-  - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#64-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code)
-  - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone.  It can't hold a solid Bluetooth connection.](#65-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection)
-  - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#66-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh)
-  - [6.8. Q: WebFlasher fails on Linux with failed to open](#67-q-webflasher-fails-on-linux-with-failed-to-open)
+  - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code)
+  - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone.  It can't hold a solid Bluetooth connection.](#66-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection)
+  - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh)
+  - [6.8. Q: WebFlasher fails on Linux with failed to open](#68-q-webflasher-fails-on-linux-with-failed-to-open)
 - [7. Other Questions:](#7-other-questions)
   - [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app)
+    - [7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?](#711-q-can-i-update-seeed-studio-wio-tracker-l1-pro-using-ota)
   - [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air)
   - [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu)
   - [7.4. Q: are the MeshCore logo and font available?](#74-q-are-the-meshcore-logo-and-font-available)
   - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code)
-  - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-comnpanion-via-wifi-eg-using-a-heltec-v3)
+  - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3)
+  - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to)
 
 ## 1. Introduction
 
@@ -91,7 +111,7 @@ MeshCore is free and open source:
 * The T-Deck firmware is developed by Scott at Ripple Radios, the creator of MeshCore, is also free to flash on your devices and use
 
 
-Some more advanced, but optional features are available on T-Deck if you register your device for a key to unlock.  On the MeshCore smartphone clients for Android and iOS/iPadOS, you can unlock the wait timer for repeater and room server remote management over RF feature. 
+Some more advanced, but optional features are available on T-Deck if you register your device for a key to unlock.  On the MeshCore smartphone clients for Android and iOS/iPadOS, you can unlock the wait timer for repeater and room server remote management over RF feature.
 
 These features are completely optional and aren't needed for the core messaging experience. They're like super bonus features and to help the developers continue to work on these amazing features, they may charge a small fee for an unlock code to utilise the advanced features.
 
@@ -99,22 +119,22 @@ Anyone is able to build anything they like on top of MeshCore without paying any
 
 ### 1.2. Q: What do you need to start using MeshCore?
 **A:** Everything you need for MeshCore is available at:
- Main web site: [https://meshcore.co.uk/](https://meshcore.co.uk/)
- Firmware Flasher: https://flasher.meshcore.co.uk/
- Phone Client Applications: https://meshcore.co.uk/apps.html
- MeshCore Firmware GitHub: https://github.com/ripplebiz/MeshCore
 
- NOTE: Andy Kirby has a very useful [intro video](https://www.youtube.com/watch?v=t1qne8uJBAc) for beginners.
- 
+- Main web site: [https://meshcore.co.uk](https://meshcore.co.uk)
+- Firmware Flasher: [https://flasher.meshcore.co.uk](https://flasher.meshcore.co.uk)
+- MeshCore Firmware on GitHub: [https://github.com/meshcore-dev/MeshCore](https://github.com/meshcore-dev/MeshCore)
+- MeshCore Companion App: [https://meshcore.nz](https://meshcore.nz)
+- MeshCore Map: [https://meshcore.co.uk/map.html](https://meshcore.co.uk/map.html)
+- Andy Kirby has a very useful [intro video](https://www.youtube.com/watch?v=t1qne8uJBAc) for beginners.
 
- You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server).
+You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server).
 
 #### 1.2.1. Hardware
 MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly.
 
 For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/
 
-To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution.  
+To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution.
 
 #### 1.2.2. Firmware
 MeshCore has four firmware types that are not available on other LoRa systems. MeshCore has the following:
@@ -122,30 +142,30 @@ MeshCore has four firmware types that are not available on other LoRa systems. M
 #### 1.2.3. Companion Radio Firmware
 Companion radios are for connecting to the Android app or web app as a messenger client. There are two different companion radio firmware versions:
 
-1. **BLE Companion**  
-   BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE 
+1. **BLE Companion**
+   BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE
    <https://meshcore.co.uk/apps.html>
 
-2. **USB Serial Companion**  
-   USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client  
-   <https://meshcore.liamcottle.net/#/>  
+2. **USB Serial Companion**
+   USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client
+   <https://meshcore.liamcottle.net/#/>
    <https://client.meshcore.co.uk/tabs/devices>
 
 #### 1.2.4. Repeater
-Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does **not** forward or retransmit every packet it receives, unlike other LoRa mesh systems.  
+Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does **not** forward or retransmit every packet it receives, unlike other LoRa mesh systems.
 
 A repeater can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
 
 #### 1.2.5. Room Server
-A room server is a simple BBS server for sharing posts. T-Deck devices running MeshCore firmware or a BLE Companion client connected to a smartphone running the MeshCore app can connect to a room server. 
+A room server is a simple BBS server for sharing posts. T-Deck devices running MeshCore firmware or a BLE Companion client connected to a smartphone running the MeshCore app can connect to a room server.
 
 Room servers store message history on them and push the stored messages to users.  Room servers allow roaming users to come back later and retrieve message history.  With channels, messages are either received when it's sent, or not received and missed if the channel user is out of range.  Room servers are different and more like email servers where you can come back later and get your emails from your mail server.
 
-A room server can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.  
+A room server can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
 
 When a client logs into a room server, the client will receive the previously 32 unseen messages.
 
-Although room server can also repeat with the command line command `set repeat on`, it is not recommended nor encouraged.  A room server with repeat set to `on` lacks the full set of repeater and remote administration features that are only available in the repeater firmware.  
+Although room server can also repeat with the command line command `set repeat on`, it is not recommended nor encouraged.  A room server with repeat set to `on` lacks the full set of repeater and remote administration features that are only available in the repeater firmware.
 
 The recommendation is to run repeater and room server on separate devices for the best experience.
 
@@ -168,37 +188,32 @@ After you flashed the latest firmware onto your repeater device, keep the device
 
 The repeater and room server CLI reference is here: https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
 
-If you have more supported devices, you can use your additional devices with the room server firmware.  
+If you have more supported devices, you can use your additional devices with the room server firmware.
 
 ### 2.2. Q: Does MeshCore cost any money?
 
-**A:** All radio firmware versions (e.g. for Heltec V3, RAK, T-1000E, etc) are free and open source developed by Scott at Ripple Radios.  
+**A:** All radio firmware versions (e.g. for Heltec V3, RAK, T-1000E, etc) are free and open source developed by Scott at Ripple Radios.
 
-The native Android and iOS client uses the freemium model and is developed by Liam Cottle, developer of meshtastic map at [meshtastic.liamcottle.net](https://meshtastic.liamcottle.net) on [GitHub](https://github.com/liamcottle/meshtastic-map) and [reticulum-meshchat on github](https://github.com/liamcottle/reticulum-meshchat). 
+The native Android and iOS client uses the freemium model and is developed by Liam Cottle, developer of meshtastic map at [meshtastic.liamcottle.net](https://meshtastic.liamcottle.net) on [GitHub](https://github.com/liamcottle/meshtastic-map) and [reticulum-meshchat on github](https://github.com/liamcottle/reticulum-meshchat).
 
-The T-Deck firmware is free to download and most features are available without cost.  To support the firmware developer, you can pay for a registration key to unlock your T-Deck for deeper map zoom and remote server administration over RF using the T-Deck.  You do not need to pay for the registration to use your T-Deck for direct messaging and connecting to repeaters and room servers. 
+The T-Deck firmware is free to download and most features are available without cost.  To support the firmware developer, you can pay for a registration key to unlock your T-Deck for deeper map zoom and remote server administration over RF using the T-Deck.  You do not need to pay for the registration to use your T-Deck for direct messaging and connecting to repeaters and room servers.
 
 
 ### 2.3. Q: What frequencies are supported by MeshCore?
-**A:** It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported. The firmware and client allow users to set their preferred frequency.  
-- Australia and New Zealand are on **915.8MHz**
-- UK and EU are on **869.525MHz**
-- Canada and USA are on **910.525MHz**
-- For other regions and countries, please check your local LoRa frequency
+**A:** It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported.
 
-In UK and EU, 867.5MHz is not allowed to use 250kHz bandwidth and it only allows 2.5% duty cycle for clients.  869.525Mhz allows an airtime of 10%, 250KHz bandwidth, and a higher EIRP, therefore MeshCore nodes can send more often and with more power. That is why this frequency is chosen for UK and EU.  This is also why Meshtastic also uses this frequency.  
+Use the smartphone client or the repeater setup feature on there web flasher to set your radios' RF settings by choosing the preset for your regions.
 
-[Source](https://discord.com/channels/826570251612323860/1330643963501351004/1356540643853209641)
+Recently, as of October 2025, many regions have moved to the "narrow" setting, aka using BW62.5 and a lower SF number (instead of the original SF11).  For example, USA/Canada (Recommended) preset is 910.525MHz, SF7, BW62.5, CR5.
+
+After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9.  Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions.
+
+If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on  the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://discord.gg/cYtQNYCCRK) to let Liam Cottle know.
 
-the rest of the radio settings are the same for all frequencies:  
-- Spread Factor (SF): 11  
-- Coding Rate (CR): 5  
-- Bandwidth (BW): 250.00  
 
-(Originally MeshCore started with SF 10.  recently (as of late April 2025) the community has advocated SF 11 also a viable option for longer range but a little slower transmission. Currently there are MeshCore meshes with SF 10 and SF 11.  Liam Cottle's smartphone app's presets now recommend SF 10 for Australia and SF 11 for all other regions and countries.  EU and UK has SF 10 and SF 11 presets.  Work with your local meshers on deciding with SF number is best for your use cases.  In the future, there may be bridge nodes that can bridge SF 10 and SF 11 (or even different frequencies) traffic.)
 
 ### 2.4. Q: What is an "advert" in MeshCore?
-**A:** 
+**A:**
 Advert means to advertise yourself on the network. In Reticulum terms it would be to announce. In Meshtastic terms it would be the node sending its node info.
 
 MeshCore allows you to manually broadcast your name, position and public encryption key, which is also signed to prevent spoofing.  When you click the advert button, it broadcasts that data over LoRa.  MeshCore calls that an Advert. There's two ways to advert, "zero hop" and "flood".
@@ -214,7 +229,7 @@ As of Aug 20 2025, a pending PR on github will change the flood advert to 12 hou
 
 ### 2.5. Q: Is there a hop limit?
 
-**A:** Internally the firmware has maximum limit of 64 hops.  In real world settings it will be difficult to get close to the limit due to the environments and timing as packets travel further and further.  We want to hear how far your MeshCore conversations go. 
+**A:** Internally the firmware has maximum limit of 64 hops.  In real world settings it will be difficult to get close to the limit due to the environments and timing as packets travel further and further.  We want to hear how far your MeshCore conversations go.
 
 
 ---
@@ -224,14 +239,14 @@ As of Aug 20 2025, a pending PR on github will change the flood advert to 12 hou
 
 ### 3.1. Q: How do you configure a repeater or a room server?
 
-**A:** - When MeshCore is flashed onto a LoRa device is for the first time, it is necessary to set the server device's frequency to make it utilize the frequency that is legal in your country or region.  
+**A:** - When MeshCore is flashed onto a LoRa device is for the first time, it is necessary to set the server device's frequency to make it utilize the frequency that is legal in your country or region.
 
 Repeater or room server can be administered with one of the options below:
-  
+
 - After a repeater or room server firmware is flashed on to a LoRa device, go to <https://config.meshcore.dev> and use the web user interface to connect to the LoRa device via USB serial.  From there you can set the name of the server, its frequency and other related settings, location, passwords etc.
 
 ![image](https://github.com/user-attachments/assets/2a9d9894-e34d-4dbe-b57c-fc3c250a2d34)
- 
+
 - Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the `console` feature to connect to the device
 
 - Use a MeshCore smartphone clients  to remotely administer servers via LoRa.
@@ -240,10 +255,10 @@ Repeater or room server can be administered with one of the options below:
 
 <https://buymeacoffee.com/ripplebiz/e/249834>
 
-  
+
 
 ### 3.2. Q: Do I need to set the location for a repeater?
-**A:** With location set for a repeater, it can show up on a MeshCore map in the future. Set location with the following commands:
+**A:** While not required, with location set for a repeater it will show up on the MeshCore map in the future. Set location with the following command:
 
 `set lat <GPS Lat> set long <GPS Lon>`
 
@@ -260,6 +275,34 @@ You can get the latitude and longitude from Google Maps by right-clicking the lo
 
 `set guest.password {guest-password}`
 
+### 3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?
+
+**A:** You can issue these commands to get or set a repeater's private key using a USB serial connection.
+
+`get prv.key` to print a repeater's private key on the serial console
+`set prv.key <hex>` to set a repeater's private key on the serial console
+
+Reboot the repeater after `set prv.key <hex>` command for the new private key to take effect.
+
+### 3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh.  How do I get a new private key with a matching public key that has its first byte of my choosing?
+
+**A:** You can generate a new private key and specific the first byte of its public key here:  https://gessaman.com/mc-keygen/
+
+
+### 3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios.  What can I do?
+
+**A:** This may be due to the SX1262 radio's auto gain control feature.  You can use this command to periodically reset its AGC.  
+
+`set agc.reset.interval <number>`
+
+The `<number>` unit is in seconds and is incremented by 4.  `set agc.reset.interval 4` works well to cure deafness.  
+
+This is a very low cost operation.  AGC reset is done by simply setting `state = STATE_IDLE;` in function `RadioLibWrapper::resetAGC()` in `RadioLibWrappers.cpp`
+
+
+### 3.8. Q: How do I make my repeater an observer on the mesh?
+
+**A:** The observer instruction is available here: https://analyzer.letsmesh.net/observer/onboard
 
 ---
 
@@ -270,14 +313,14 @@ You can get the latitude and longitude from Google Maps by right-clicking the lo
 **A:** Yes, it is available on https://buymeacoffee.com/ripplebiz/ultra-v7-7-guide-meshcore-users
 
 ### 4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?
-**A:**  
-1. Device off  
-2. Connect USB cable to device  
-3. Hold down trackball (keep holding)  
-4. Turn on device  
-5. Hear USB connection sound  
-6. Release trackball  
-7. T-Deck in DFU mode now  
+**A:**
+1. Device off
+2. Connect USB cable to device
+3. Hold down trackball (keep holding)
+4. Turn on device
+5. Hear USB connection sound
+6. Release trackball
+7. T-Deck in DFU mode now
 8. At this point you can begin flashing using <https://flasher.meshcore.co.uk/>
 
 ### 4.3. Q: Why is my T-Deck Plus not getting any satellite lock?
@@ -294,10 +337,12 @@ GPS on T-Deck is always enabled.  You can skip the "GPS clock sync" and the T-De
 **A:** Users have had no issues using 16GB or 32GB SD cards. Format the SD card to **FAT32**.
 
 ### 4.6. Q: what is the public key for the default public channel?
-**A:** 
-T-Deck uses the same key the smartphone apps use but in base64 
+**A:**
+T-Deck uses the same key the smartphone apps use but in base64
 `izOH6cXN6mrJ5e26oRXNcg==`
-The third character is the capital letter 'O', not zero `0`
+
+There is no `=` key on the T-Deck's hardware keyboard.  You can use the on-screen software keyboard to enter `=`.  Tap the text box to enable the on-screen software keyboard.
+The third character is the capital letter `O` (Oh), not zero `0`
 
 The smartphone app key is in hex:
 ` 8b3387e9c5cdea6ac9e5edbaa115cd72`
@@ -305,24 +350,24 @@ The smartphone app key is in hex:
 [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1354194409213792388)
 
 ### 4.7. Q: How do I get maps on T-Deck?
-**A:** You need map tiles. You can get pre-downloaded map tiles here (a good way to support development):  
-- <https://buymeacoffee.com/ripplebiz/e/342543> (Europe)  
+**A:** You need map tiles. You can get pre-downloaded map tiles here (a good way to support development):
+- <https://buymeacoffee.com/ripplebiz/e/342543> (Europe)
 - <https://buymeacoffee.com/ripplebiz/e/342542> (US)
 
-Another way to download map tiles is to use this Python script to get the tiles in the areas you want:  
-<https://github.com/fistulareffigy/MTD-Script>  
+Another way to download map tiles is to use this Python script to get the tiles in the areas you want:
+<https://github.com/fistulareffigy/MTD-Script>
 
-There is also a modified script that adds additional error handling and parallel downloads:  
-<https://discord.com/channels/826570251612323860/1330643963501351004/1338775811548905572>  
+There is also a modified script that adds additional error handling and parallel downloads:
+<https://discord.com/channels/826570251612323860/1330643963501351004/1338775811548905572>
 
-UK map tiles are available separately from Andy Kirby on his discord server:  
+UK map tiles are available separately from Andy Kirby on his discord server:
 <https://discord.com/channels/826570251612323860/1330643963501351004/1331346597367386224>
 
 ### 4.8. Q: Where do the map tiles go?
 Once you have the tiles downloaded, copy the `\tiles` folder to the root of your T-Deck's SD card.
 
 ### 4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?
-**A:** You can download, install, and use the T-Deck firmware for free, but it has some features (map zoom, server administration) that are enabled if you purchase an unlock code for \$10 per T-Deck device.  
+**A:** You can download, install, and use the T-Deck firmware for free, but it has some features (map zoom, server administration) that are enabled if you purchase an unlock code for \$10 per T-Deck device.
 Unlock page: <https://buymeacoffee.com/ripplebiz/e/249834>
 
 ### 4.10. Q: How to decipher the diagnostics screen on T-Deck?
@@ -330,17 +375,17 @@ Unlock page: <https://buymeacoffee.com/ripplebiz/e/249834>
 **A: ** Space is tight on T-Deck's screen, so the information is a bit cryptic.  The format is :
 `{hops} l:{packet-length}({payload-len}) t:{packet-type} snr:{n} rssi:{n}`
 
-See here for packet-type: 
+See here for packet-type:
 https://github.com/meshcore-dev/MeshCore/blob/main/src/Packet.h#L19
- 
 
-    #define PAYLOAD_TYPE_REQ 0x00 // request (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob) 
-    #define PAYLOAD_TYPE_RESPONSE 0x01 // response to REQ or ANON_REQ (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob) 
-    #define PAYLOAD_TYPE_TXT_MSG 0x02 // a plain text message (prefixed with dest/src hashes, MAC) (enc data: timestamp, text) 
-    #define PAYLOAD_TYPE_ACK 0x03 // a simple ack #define PAYLOAD_TYPE_ADVERT 0x04 // a node advertising its Identity 
-    #define PAYLOAD_TYPE_GRP_TXT 0x05 // an (unverified) group text message (prefixed with channel hash, MAC) (enc data: timestamp, "name: msg") 
-    #define PAYLOAD_TYPE_GRP_DATA 0x06 // an (unverified) group datagram (prefixed with channel hash, MAC) (enc data: timestamp, blob) 
-    #define PAYLOAD_TYPE_ANON_REQ 0x07 // generic request (prefixed with dest_hash, ephemeral pub_key, MAC) (enc data: ...) 
+
+    #define PAYLOAD_TYPE_REQ 0x00 // request (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)
+    #define PAYLOAD_TYPE_RESPONSE 0x01 // response to REQ or ANON_REQ (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)
+    #define PAYLOAD_TYPE_TXT_MSG 0x02 // a plain text message (prefixed with dest/src hashes, MAC) (enc data: timestamp, text)
+    #define PAYLOAD_TYPE_ACK 0x03 // a simple ack #define PAYLOAD_TYPE_ADVERT 0x04 // a node advertising its Identity
+    #define PAYLOAD_TYPE_GRP_TXT 0x05 // an (unverified) group text message (prefixed with channel hash, MAC) (enc data: timestamp, "name: msg")
+    #define PAYLOAD_TYPE_GRP_DATA 0x06 // an (unverified) group datagram (prefixed with channel hash, MAC) (enc data: timestamp, blob)
+    #define PAYLOAD_TYPE_ANON_REQ 0x07 // generic request (prefixed with dest_hash, ephemeral pub_key, MAC) (enc data: ...)
     #define PAYLOAD_TYPE_PATH 0x08 // returned path (prefixed with dest/src hashes, MAC) (enc data: path, extra)
 
 [Source](https://discord.com/channels/1343693475589263471/1343693475589263474/1350611321040932966)
@@ -370,14 +415,30 @@ https://github.com/meshcore-dev/MeshCore/blob/main/src/Packet.h#L19
 
 ### 5.1. Q: What are BW, SF, and CR?
 
-**A:** 
+**A:**
 
 **BW is bandwidth** - width of frequency spectrum that is used for transmission
 
 **SF is spreading factor** - how much should the communication spread in time
 
-**CR is coding rate** - https://www.thethingsnetwork.org/docs/lorawan/fec-and-code-rate/
-Making the bandwidth 2x wider (from BW125 to BW250) allows you to send 2x more bytes in the same time. Making the spreading factor 1 step lower (from SF10 to SF9) allows you to send 2x more bytes in the same time. 
+**CR is coding rate** - from: https://www.thethingsnetwork.org/docs/lorawan/fec-and-code-rate/
+
+TL;DR: default CR to 5 for good stable links.  If it is not a solid link and is intermittent, change to CR to 7 or 8.
+
+Forward Error Correction is a process of adding redundant bits to the data to be transmitted. During the transmission, data may get corrupted by interference (changes from 0 to 1 / 1 to 0). These error correction bits are used at the receivers for restoring corrupted bits.
+
+The Code Rate of a forward error correction expresses the proportion of bits in a data stream that actually carry useful information.
+
+There are 4 code rates used in LoRaWAN:
+
+4/5
+4/6
+5/7
+4/8
+
+For example, if the code rate is 5/7, for every 5 bits of useful information, the coder generates a total of 7 bits of data, of which 2 bits are redundant.
+
+Making the bandwidth 2x wider (from BW125 to BW250) allows you to send 2x more bytes in the same time. Making the spreading factor 1 step lower (from SF10 to SF9) allows you to send 2x more bytes in the same time.
 
 Lowering the spreading factor makes it more difficult for the gateway to receive a transmission, as it will be more sensitive to noise. You could compare this to two people taking in a noisy place (a bar for example). If you’re far from each other, you have to talk slow (SF10), but if you’re close, you can talk faster (SF7)
 
@@ -385,14 +446,14 @@ So, it's balancing act between speed of the transmission and resistance to noise
 things network is mainly focused on LoRaWAN, but the LoRa low-level stuff still checks out for any LoRa project
 
 ### 5.2. Q: Do MeshCore clients repeat?
-**A:** No, MeshCore clients do not repeat.  This is the core of MeshCore's messaging-first design.  This is to avoid devices flooding the air ware and create endless collisions, so messages sent aren't received.  
-In MeshCore, only repeaters and room server with `set repeat on` repeat.  
+**A:** No, MeshCore clients do not repeat.  This is the core of MeshCore's messaging-first design.  This is to avoid devices flooding the air ware and create endless collisions, so messages sent aren't received.
+In MeshCore, only repeaters and room server with `set repeat on` repeat.
 
 ### 5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?
 
 **A:** If you used to reach a node through a repeater and the repeater is no longer reachable, the client will send the message using the existing (but now broken) known path, the message will fail after 3 retries, and the app will reset the path and send the message as flood on the last retry by default.  This can be turned off in settings.  If the destination is reachable directly or through another repeater, the new path will be used going forward.  Or you can set the path manually if you know a specific repeater to use to reach that destination.
 
-In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path. 
+In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path.
 
 ### 5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?
 
@@ -411,14 +472,14 @@ Routes are stored in sender's contact list.  When you send a message the first t
 **A:** The smartphone app key is in hex:
 ` 8b3387e9c5cdea6ac9e5edbaa115cd72`
 
-T-Deck uses the same key but in base64 
+T-Deck uses the same key but in base64
 `izOH6cXN6mrJ5e26oRXNcg==`
 The third character is the capital letter 'O', not zero `0`
 [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1354194409213792388)
 
 ### 5.7. Q: Is MeshCore open source?
-**A:** Most of the firmware is freely available. Everything is open source except the T-Deck firmware and Liam's native mobile apps.  
-- Firmware repo: https://github.com/meshcore-dev/MeshCore  
+**A:** Most of the firmware is freely available. Everything is open source except the T-Deck firmware and Liam's native mobile apps.
+- Firmware repo: https://github.com/meshcore-dev/MeshCore
 
 ### 5.8. Q: How can I support MeshCore?
 **A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://discord.gg/BMwCtwHj5V). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at <https://buymeacoffee.com/ripplebiz>.
@@ -428,7 +489,7 @@ Support Liam Cottle's smartphone client development by unlocking the server admi
 Support Rastislav Vysoky (recrof)'s flasher web site and the map web site development through [PayPal](https://www.paypal.com/donate/?business=DREHF5HM265ES&no_recurring=0&item_name=If+you+enjoy+my+work%2C+you+can+support+me+here%3A&currency_code=EUR) or [Revolut](https://revolut.me/recrof)
 
 ### 5.9. Q: How do I build MeshCore firmware from source?
-**A:** See instructions here:  
+**A:** See instructions here:
 https://discord.com/channels/826570251612323860/1330643963501351004/1341826372120608769
 
 Build instructions for MeshCore:
@@ -448,7 +509,7 @@ Then it should be the same for all platforms:
 python3 -m venv meshcore
 cd meshcore && source bin/activate
 pip install -U platformio
-git clone https://github.com/ripplebiz/MeshCore.git 
+git clone https://github.com/ripplebiz/MeshCore.git
 cd MeshCore
 ```
 open platformio.ini and in `[arduino_base]` edit the `LORA_FREQ=867.5`
@@ -458,8 +519,8 @@ pio run -e RAK_4631_Repeater
 ```
 then you'll find `firmware.zip` in `.pio/build/RAK_4631_Repeater`
 
-Andy also has a video on how to build using VS Code:  
-*How to build and flash Meshcore repeater firmware | Heltec V3*  
+Andy also has a video on how to build using VS Code:
+*How to build and flash Meshcore repeater firmware | Heltec V3*
 <https://www.youtube.com/watch?v=WJvg6dt13hk> *(Link referenced in the Discord post)*
 
 ### 5.10. Q: Are there other MeshCore related open source projects?
@@ -476,13 +537,13 @@ Meshcore would not be best suited to ATAK because MeshCore:
 clients do not repeat and therefore you would need a network of repeaters in place
 will not have a stable path where all clients are constantly moving between repeaters
 
-MeshCore clients would need to reset path constantly and flood traffic across the network which could lead to lots of collisions with something as chatty as ATAK. 
+MeshCore clients would need to reset path constantly and flood traffic across the network which could lead to lots of collisions with something as chatty as ATAK.
 
 This could change in the future if MeshCore develops a client firmware that repeats.
 [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1354780032140054659)
 
-### 5.12. Q: How do I add a node to the [MeshCore Map]([url](https://meshcore.co.uk/map.html))
-**A:** 
+### 5.12. Q: How do I add a node to the [MeshCore Map](https://meshcore.co.uk/map.html)
+**A:**
 
 To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app.  In the app, tap the `3 dot` menu icon at the top right corner, then tap `Internet Map`.  Tap the `3 dot` menu icon again and choose `Add me to the Map`
 
@@ -501,7 +562,7 @@ For ESP-based devices (e.g. Heltec V3) you need:
 - Download firmware file from flasher.meshcore.co.uk
     - Go to the web site on a browser, find the section that has the firmware up need
     - Click the Download button, right click on the file you need, for example,
-        - `Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin` 
+        - `Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin`
             - Non-merged bin keeps the existing Bluetooth pairing database
         - `Heltec_v3_companion_radio_usb-v1.7.1-165fb33-merged.bin`
             - Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations.
@@ -520,7 +581,7 @@ For ESP-based devices (e.g. Heltec V3) you need:
             - `esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x10000 <non-merged_firmware>.bin`
         - For merged bin:
             - `esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x00000 <merged_firmware>.bin`
-	
+
 
 
 **Instructions for nRF devices:**
@@ -541,51 +602,136 @@ For nRF devices (e.g. RAK, Heltec T114) you need the following:
         - `pip install adafruit-nrfutil --break-system-packages`
         - Use this command to flash the nRF device:
             - `adafruit-nrfutil --verbose dfu serial --package RAK_4631_companion_radio_usb-v1.7.1-165fb33.zip -p /dev/ttyACM0 -b 115200 --singlebank --touch 1200`
-		
-		
+
+
 To manage a repeater or room server connected to a Pi over USB serial using shell commands, you need to install `picocom`.  To install `picocom`, run the following command:
 - `sudo apt install picocom`
 
 To start managing your USB serial-connected device using picocom, use the following command:
     - `picocom -b 115200 /dev/ttyUSB0 --imap lfcrlf`
 
-From here, reference repeater and room server command line commands on MeshCore github wiki here: 
+From here, reference repeater and room server command line commands on MeshCore github wiki here:
     - https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
 
-  
+
 ### 5.14. Q: Are there are projects built around MeshCore?
 
-**A:** Yes.  See the following:
+**A:** Yes. Some of them are listed below.
 
-#### 5.14.1. meshcoremqtt
-A Python script to send meshore debug and packet capture data to MQTT for analysis
+#### 5.14.1. overview
+
+Some resources that by themselves give overviews about MeshCore related projects:
+
+##### 5.14.1.1. awesome-meshcore
+A meta website/ git-repository collecting many projects related to MeshCore, grouped by type. See  
+https://github.com/samuk/awesome-meshcore.
+
+#### 5.14.2. programming libraries, command line software
+
+##### 5.14.2.1. meshcoremqtt
+A Python script to send meshcore debug and packet capture data to MQTT for analysis.  Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/
+https://github.com/Cisien/meshcoretomqtt
 https://github.com/Andrew-a-g/meshcoretomqtt
 
-#### 5.14.2. MeshCore for Home Assistant
+##### 5.14.2.2. MeshCore for Home Assistant
 A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections.
 https://github.com/awolden/meshcore-ha
 
-#### 5.14.3. Python MeshCore
+##### 5.14.2.3. Python MeshCore
 Bindings to access your MeshCore companion radio nodes in python.
 https://github.com/fdlamotte/meshcore_py
 
-#### 5.14.4. meshcore-cli  
+##### 5.14.2.4. meshcore-cli
 CLI interface to MeshCore companion radio over BLE, TCP, or serial.  Uses Python MeshCore above.
  https://github.com/fdlamotte/meshcore-cli
 
-#### 5.14.5. meshcore.js
+##### 5.14.2.5. meshcore.js
 A JavaScript library for interacting with a MeshCore device running the companion radio firmware
 https://github.com/liamcottle/meshcore.js
 
+##### 5.14.2.6. pyMC_core
+pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI.
+https://github.com/rightup/pyMC_core
+
+##### 5.14.2.7. MeshCore Packet Decoder
+A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library.  It powers the [MeshCore Packet Analyzer](https://analyzer.letsmesh.net/packets).
+https://github.com/michaelhart/meshcore-decoder
+
+##### 5.14.2.8. meshcore-pi
+meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO.
+https://github.com/brianwiddas/meshcore-pi
+
+##### 5.14.2.9. pyMC_Repeater
+pyMC_Repeater is a repeater daemon in Python built on top of the [`pymc_core`](#5146-pymc_core) library.
+https://github.com/rightup/pyMC_Repeater
+
+##### 5.14.2.10. MeshCore map auto uploader
+A Node.js software that will upload every repeater or room server to [map.meshcore.dev](https://map.meshcore.dev/) when a connected companion hears new advert.  
+https://github.com/recrof/map.meshcore.dev-uploader
+
+#### 5.14.3. apps, graphical software
+
+##### 5.14.3.1. meshcore-open
+Open Source companion app for Android, iOS, GNU/Linux (and maybe other Unixes), Windows, macOS, chromium-based browsers.  
+https://github.com/zjs81/meshcore-open
+
+#### 5.14.4. firmwares
+
+##### 5.14.4.1. MeshCore-Cardputer-ADV
+Standalone client firmware for the "[M5Stack Cardputer ADV](https://docs.m5stack.com/en/core/Cardputer-Adv)" with the "[M5Stack Cap LoRa-1262](https://docs.m5stack.com/en/cap/Cap_LoRa-1262)" module.
+
+There are two variants:
+
+* https://github.com/Stachugit/MeshCore-Cardputer-ADV,
+* https://github.com/sosprz/meshcore-cardputer-adv.
+
+##### 5.14.4.2. LunarCore
+Multi-protocol mesh firmware for ESP32-S3 LoRa devices (MeshCore, Meshtastic, RNode/KISS (Reticulum)). Protocol is auto-detected from the first bytes over serial or BLE.  
+https://github.com/STCisGOOD/lunarcore
+
+##### 5.14.4.3. MC-Term
+(Soon to be) Open Source companion firmware for [LilyGO T-Deck (Plus)](https://lilygo.cc/en-us/products/t-deck-plus-1) and [Seeed Studio SenseCap Indicator (TFT / D1Pro)](https://www.seeedstudio.com/SenseCAP-Indicator-D1Pro-p-5644.html), that can be used both standalone and together with a companion app.  
+https://github.com/dabeani/meshcore
+
+##### 5.14.4.4. Meck
+Companion firmware for [LilyGo T-Deck Pro](https://lilygo.cc/products/t-deck-pro) that allows standalone operation and connection to a companion app via Bluetooth Low Energy (BLE).  
+https://github.com/pelgraine/Meck
+
+##### 5.14.4.5. Meshcore for Wio Tracker L1 Pro
+Companion firmware for [Seeed Studio Wio Tracker L1 Pro](https://www.seeedstudio.com/Wio-Tracker-L1-Pro-p-6454.html) with specific UI adjustments that can be used standalone.  
+https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro
+
+#### 5.14.5. online services
+
+*(None yet listed here. See [overview ressources](#5141-overview).)*
+
+
+### 5.15. Q: Are there client applications for Windows or Mac?
+**A:** Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet).  You can find them together with the Android APK here:
+https://files.liamcottle.net/MeshCore
+
+Both the Windows and Intel Mac versions of the client app are fully unlocked and are free to use.
+
+### 5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?
+
+**A:** Here is a list of MeshCore comparison resources:
+The Comms Channel on YouTube:
+https://www.youtube.com/watch?v=guDoKGs02Us
+MeshCore Advantages by MCarper:
+https://github.com/mikecarper/meshfirmware/blob/main/MeshCoreAdvantages.md
+Meshcore vs Meshtastic by austinmesh.org
+https://www.austinmesh.org/learn/meshcore-vs-meshtastic/
+
+
 ---
 
 ## 6. Troubleshooting
 
 ### 6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.
 ### 6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.
-**A:**  
-- If your client is a T-Deck, it may not have its time set (no GPS installed, no GPS lock, or wrong GPS baud rate).  
-- If you are using the Android or iOS client, the other client, repeater, or room server may have the wrong time.  
+**A:**
+- If your client is a T-Deck, it may not have its time set (no GPS installed, no GPS lock, or wrong GPS baud rate).
+- If you are using the Android or iOS client, the other client, repeater, or room server may have the wrong time.
 
 You can get the epoch time on <https://www.epochconverter.com/> and use it to set your T-Deck clock. For a repeater and room server, the admin can use a T-Deck to remotely set their clock (clock sync), or use the `time` command in the USB serial console with the server device connected.
 
@@ -606,23 +752,23 @@ You can get the epoch time on <https://www.epochconverter.com/> and use it to se
 
 ### 6.7. Q: My RAK/T1000-E/xiao_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?
 
-**A:** 
+**A:**
 1. Connect USB-C cable to your device, per your device's instruction, get it to flash mode:
     - For RAK, click the reset button **TWICE**
     - For T1000-e, quickly disconnect and reconnect the magnetic side of the cable from the device **TWICE**
     - For Heltec T114, click the reset button **TWICE** (the bottom button)
     - For Xiao nRF52, click the reset button once.  If that doesn't work, quickly double click the reset button twice.  If that doesn't work, disconnection the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader))
 5. A new folder will appear on your computer's desktop
-6. Download the `flash_erase*.uf2` file for your device on flasher.meshcore.co.uk 
+6. Download the `flash_erase*.uf2` file for your device on flasher.meshcore.co.uk
     - RAK WisBlock and Heltec T114: `Flash_erase-nRF32_softdevice_v6.uf2`
     - Seeed Studio Xiao nRF52 WIO: `Flash_erase-nRF52_softdevice_v7.uf2`
 8. drag and drop the uf2 file for your device to the root of the new folder
 9. Wait for the copy to complete.  You might get an error dialog, you can ignore it
-10. Go to https://flasher.meshcore.co.uk/, click `Console` and select the serial port for your connected device 
+10. Go to https://flasher.meshcore.co.uk/, click `Console` and select the serial port for your connected device
 11. In the console, press enter.  Your flash should now be erased
 12. You may now flash the latest MeshCore firmware onto your device
 
-Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode.  If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot.  Then you can use the 'Console' on flasher.meshcore.co.uk 
+Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode.  If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot.  Then you can use the 'Console' on flasher.meshcore.co.uk
 
 ### 6.8. Q: WebFlasher fails on Linux with failed to open
 
@@ -645,14 +791,20 @@ Allow the browser user on it:
 4. Go to the Command Line tab, type `start ota` and hit enter.
 5. you should see `OK` to confirm the repeater device is now in OTA mode
 6. Run the DFU app,tab `Settings` on the top right corner
-7. Enable `Packets receipt notifications`, and change `Number of Packets` to 10 for RAK, 8 for T114.  8 also works for RAK.  
+7. Enable `Packets receipt notifications`, and change `Number of Packets` to 10 for RAK, 8 for T114.  8 also works for RAK.
 9. Select the firmware zip file you downloaded
 10. Select the device you want to update. If the device you want to update is not on the list, try enabling`OTA` on the device again
 11. If the device is not found, enable `Force Scanning` in the DFU app
 12. Tab the `Upload` to begin OTA update
-13. If it fails, try turning off and on Bluetooth on your phone.  If that doesn't work, try rebooting your phone.  
+13. If it fails, try turning off and on Bluetooth on your phone.  If that doesn't work, try rebooting your phone.
 14. Wait for the update to complete.  It can take a few minutes.
 
+#### 7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?
+**A:**  You can flash this safer bootloader to the Wio Tracker L1 Pro
+https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX
+
+After this bootloader is flashed onto the device, you can trigger over the air update using bluetooth by holding the button next to the D-Pad and then click the reset button.  The follow the same OTA update instructions above.  You can skip pass the `start ota` instruction and start the update using the DFU app.
+
 
 ### 7.2. Q: How to update ESP32-based devices over the air?
 
@@ -662,25 +814,29 @@ Allow the browser user on it:
 4. Go to the Command Line tab, type `start ota` and hit enter.
 5. you should see `OK` to confirm the repeater device is now in OTA mode
 6. The command `start ota` on an ESP32-based device starts a wifi hotspot named `MeshCore OTA`
-7. From your phone or computer connect to the 'MeshCore OTA' hotspot 
+7. From your phone or computer connect to the 'MeshCore OTA' hotspot
 8. From a browser, go to http://192.168.4.1/update and upload the non-merged bin from the flasher
 
 
 ### 7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?
 
-**A:** Yes, developer `che aporeps` has an enhanced OTA DFU bootloader for nRF52 based devices.  With this bootloader, if it detects that the application firmware is invalid, it falls back to OTA DFU mode so you can attempt to flash again to recover.  This bootloader has other changes to make the OTA DFU process more fault tolerant. 
+**A:** Yes, developer `che aporeps` has an enhanced OTA DFU bootloader for nRF52 based devices.  With this bootloader, if it detects that the application firmware is invalid, it falls back to OTA DFU mode so you can attempt to flash again to recover.  This bootloader has other changes to make the OTA DFU process more fault tolerant.
 
 Refer to https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX for the latest information.
 
 Currently, the following boards are supported:
-- Nologo ProMicro
+- Heltec Automation Mesh Node T114 / HT-nRF5262
+- Nologo ProMicro NRF52840 (aka SuperMini NRF52840)
+- Seeed Studio SenseCAP Card Tracker T1000-E
+- Seeed Studio Wio Tracker L1
 - Seeed Studio XIAO nRF52840 BLE
 - Seeed Studio XIAO nRF52840 BLE SENSE
-- RAK 4631
+- RAK 4631 (See note)
+- RAK WisMesh Tag (new 28/11/2025)
 
 ### 7.4. Q: are the MeshCore logo and font available?
 
-**A:** Yes, it is on the MeshCore github repo here: 
+**A:** Yes, it is on the MeshCore github repo here:
 https://github.com/meshcore-dev/MeshCore/tree/main/logo
 
 ### 7.5. Q: What is the format of a contact or channel QR code?
@@ -699,8 +855,26 @@ where `&type` is:
 `sensor = 4`
 
 ### 7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?
- **A:** 
+ **A:**
 WiFi firmware requires you to compile it yourself, as you need to set the wifi ssid and password.
 Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then flash it to your device.
 
+### 7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?
+ **A:**
+For companion radios, you can set these radios' transmit power in the smartphone app.  For repeater and room server radios, you can set their transmit power using the command line command `set tx`.  You can get their current value using command line comand `get tx`
+
+
+> ### ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.**
+
+| Device / Model | Region / Description | In-App Setting (dBm) | Target Radio Output | Notes |
+| :--- | :--- | :--- | :--- | :--- |
+| **Station G2** <br> [Reference](https://wiki.uniteng.com/en/meshtastic/station-g2) | US915 Max Output | 19 dBm | 36.5 dBm (4.46W) | |
+| | US915 Recommended Max | 16 dBm | 35 dBm (3.16W) | 1dB compression point |
+| | EU868 Recommended Max | 15 dBm | 34.5 dBm (2.82W) | 1dB compression point |
+| | US915 1W Output | 10 dBm | 1W | |
+| | EU868 1W Output | 9 dBm | 1W | |
+| **Ikoka Stick E22-900M30S** | 1W Model | 19 dBm | 1W | **DO NOT EXCEED** (Risk of burn out) |
+| **Ikoka Stick E22-900M33S** | 2W Model | 9 dBm | 2W | **DO NOT EXCEED** (Risk of burn out) |
+| **Heltec V4** | Standard Output | 10 dBm | 22 dBm | |
+| | High Output | 22 dBm | 28 dBm | |
 ---

docs/index.md

@@ -0,0 +1,15 @@
+# Introduction
+
+Welcome to the MeshCore documentation.
+
+Below are a few quick start guides.
+
+- [Frequently Asked Questions](./faq.md)
+- [CLI Commands](./cli_commands.md)
+- [Companion Protocol](./companion_protocol.md)
+- [Packet Format](./packet_format.md)
+- [QR Codes](./qr_codes.md)
+
+If you find a mistake in any of our documentation, or find something is missing, please feel free to open a pull request for us to review.
+
+- [Documentation Source](https://github.com/meshcore-dev/MeshCore/tree/main/docs)

docs/packet_format.md

@@ -0,0 +1,120 @@
+# Packet Format
+
+This document describes the MeshCore packet format.
+
+- `0xYY` indicates `YY` in hex notation.
+- `0bYY` indicates `YY` in binary notation.
+- Bit 0 indicates the bit furthest to the right: `0000000X`
+- Bit 7 indicates the bit furthest to the left: `X0000000`
+
+## Version 1 Packet Format
+
+This is the protocol level packet structure used in MeshCore firmware v1.12.0
+
+```
+[header][transport_codes(optional)][path_length][path][payload]
+```
+
+- [header](#header-format) - 1 byte
+    - 8-bit Format: `0bVVPPPPRR` - `V=Version` - `P=PayloadType` - `R=RouteType`
+    - Bits 0-1 - 2-bits - [Route Type](#route-types)
+        - `0x00`/`0b00` - `ROUTE_TYPE_TRANSPORT_FLOOD` - Flood Routing + Transport Codes
+        - `0x01`/`0b01` - `ROUTE_TYPE_FLOOD` - Flood Routing
+        - `0x02`/`0b10` - `ROUTE_TYPE_DIRECT` - Direct Routing
+        - `0x03`/`0b11` - `ROUTE_TYPE_TRANSPORT_DIRECT` - Direct Routing + Transport Codes
+    - Bits 2-5 - 4-bits - [Payload Type](#payload-types)
+        - `0x00`/`0b0000` - `PAYLOAD_TYPE_REQ` - Request (destination/source hashes + MAC)
+        - `0x01`/`0b0001` - `PAYLOAD_TYPE_RESPONSE` - Response to `REQ` or `ANON_REQ`
+        - `0x02`/`0b0010` - `PAYLOAD_TYPE_TXT_MSG` - Plain text message
+        - `0x03`/`0b0011` - `PAYLOAD_TYPE_ACK` - Acknowledgment
+        - `0x04`/`0b0100` - `PAYLOAD_TYPE_ADVERT` - Node advertisement
+        - `0x05`/`0b0101` - `PAYLOAD_TYPE_GRP_TXT` - Group text message (unverified)
+        - `0x06`/`0b0110` - `PAYLOAD_TYPE_GRP_DATA` - Group datagram (unverified)
+        - `0x07`/`0b0111` - `PAYLOAD_TYPE_ANON_REQ` - Anonymous request
+        - `0x08`/`0b1000` - `PAYLOAD_TYPE_PATH` - Returned path
+        - `0x09`/`0b1001` - `PAYLOAD_TYPE_TRACE` - Trace a path, collecting SNR for each hop
+        - `0x0A`/`0b1010` - `PAYLOAD_TYPE_MULTIPART` - Packet is part of a sequence of packets
+        - `0x0B`/`0b1011` - `PAYLOAD_TYPE_CONTROL` - Control packet data (unencrypted)
+        - `0x0C`/`0b1100` - reserved
+        - `0x0D`/`0b1101` - reserved
+        - `0x0E`/`0b1110` - reserved
+        - `0x0F`/`0b1111` - `PAYLOAD_TYPE_RAW_CUSTOM` - Custom packet (raw bytes, custom encryption)
+    - Bits 6-7 - 2-bits - [Payload Version](#payload-versions)
+        - `0x00`/`0b00` - v1 - 1-byte src/dest hashes, 2-byte MAC
+        - `0x01`/`0b01` - v2 - Future version (e.g., 2-byte hashes, 4-byte MAC)
+        - `0x02`/`0b10` - v3 - Future version
+        - `0x03`/`0b11` - v4 - Future version
+- `transport_codes` - 4 bytes (optional)
+    - Only present for `ROUTE_TYPE_TRANSPORT_FLOOD` and `ROUTE_TYPE_TRANSPORT_DIRECT`
+    - `transport_code_1` - 2 bytes - `uint16_t` - calculated from region scope
+    - `transport_code_2` - 2 bytes - `uint16_t` - reserved
+- `path_length` - 1 byte - Length of the path field in bytes
+- `path` - size provided by `path_length` - Path to use for Direct Routing
+    - Up to a maximum of 64 bytes, defined by `MAX_PATH_SIZE`
+    - v1.12.0 firmware and older drops packets with `path_length` [larger than 64](https://github.com/meshcore-dev/MeshCore/blob/e812632235274ffd2382adf5354168aec765d416/src/Dispatcher.cpp#L144)
+- `payload` - variable length - Payload Data
+    - Up to a maximum 184 bytes, defined by `MAX_PACKET_PAYLOAD`
+    - Generally this is the remainder of the raw packet data
+    - The firmware parses this data based on the provided Payload Type
+    - v1.12.0 firmware and older drops packets with `payload` sizes [larger than 184](https://github.com/meshcore-dev/MeshCore/blob/e812632235274ffd2382adf5354168aec765d416/src/Dispatcher.cpp#L152)
+
+### Packet Format
+
+| Field           | Size (bytes)                     | Description                                              |
+|-----------------|----------------------------------|----------------------------------------------------------|
+| header          | 1                                | Contains routing type, payload type, and payload version |
+| transport_codes | 4 (optional)                     | 2x 16-bit transport codes (if ROUTE_TYPE_TRANSPORT_*)    |
+| path_length     | 1                                | Length of the path field in bytes                        |
+| path            | up to 64 (`MAX_PATH_SIZE`)       | Stores the routing path if applicable                    |
+| payload         | up to 184 (`MAX_PACKET_PAYLOAD`) | Data for the provided Payload Type                       |
+
+> NOTE: see the [Payloads](./payloads.md) documentation for more information about the content of specific payload types.
+
+### Header Format
+
+Bit 0 means the lowest bit (1s place)
+
+| Bits | Mask   | Field           | Description                      |
+|------|--------|-----------------|----------------------------------|
+| 0-1  | `0x03` | Route Type      | Flood, Direct, etc               |
+| 2-5  | `0x3C` | Payload Type    | Request, Response, ACK, etc      |
+| 6-7  | `0xC0` | Payload Version | Versioning of the payload format |
+
+### Route Types
+
+| Value  | Name                          | Description                      |
+|--------|-------------------------------|----------------------------------|
+| `0x00` | `ROUTE_TYPE_TRANSPORT_FLOOD`  | Flood Routing + Transport Codes  |
+| `0x01` | `ROUTE_TYPE_FLOOD`            | Flood Routing                    |
+| `0x02` | `ROUTE_TYPE_DIRECT`           | Direct Routing                   |
+| `0x03` | `ROUTE_TYPE_TRANSPORT_DIRECT` | Direct Routing + Transport Codes |
+
+### Payload Types
+
+| Value  | Name                      | Description                                  |
+|--------|---------------------------|----------------------------------------------|
+| `0x00` | `PAYLOAD_TYPE_REQ`        | Request (destination/source hashes + MAC)    |
+| `0x01` | `PAYLOAD_TYPE_RESPONSE`   | Response to `REQ` or `ANON_REQ`              |
+| `0x02` | `PAYLOAD_TYPE_TXT_MSG`    | Plain text message                           |
+| `0x03` | `PAYLOAD_TYPE_ACK`        | Acknowledgment                               |
+| `0x04` | `PAYLOAD_TYPE_ADVERT`     | Node advertisement                           |
+| `0x05` | `PAYLOAD_TYPE_GRP_TXT`    | Group text message (unverified)              |
+| `0x06` | `PAYLOAD_TYPE_GRP_DATA`   | Group datagram (unverified)                  |
+| `0x07` | `PAYLOAD_TYPE_ANON_REQ`   | Anonymous request                            |
+| `0x08` | `PAYLOAD_TYPE_PATH`       | Returned path                                |
+| `0x09` | `PAYLOAD_TYPE_TRACE`      | Trace a path, collecting SNR for each hop    |
+| `0x0A` | `PAYLOAD_TYPE_MULTIPART`  | Packet is part of a sequence of packets      |
+| `0x0B` | `PAYLOAD_TYPE_CONTROL`    | Control packet data (unencrypted)            |
+| `0x0C` | reserved                  | reserved                                     |
+| `0x0D` | reserved                  | reserved                                     |
+| `0x0E` | reserved                  | reserved                                     |
+| `0x0F` | `PAYLOAD_TYPE_RAW_CUSTOM` | Custom packet (raw bytes, custom encryption) |
+
+### Payload Versions
+
+| Value  | Version | Description                                      |
+|--------|---------|--------------------------------------------------|
+| `0x00` | 1       | 1-byte src/dest hashes, 2-byte MAC               |
+| `0x01` | 2       | Future version (e.g., 2-byte hashes, 4-byte MAC) |
+| `0x02` | 3       | Future version                                   |
+| `0x03` | 4       | Future version                                   |

docs/packet_structure.md

@@ -1,60 +0,0 @@
-# Packet Structure
-
-| Field           | Size (bytes)                     | Description                                               |
-|-----------------|----------------------------------|-----------------------------------------------------------|
-| header          | 1                                | Contains routing type, payload type, and payload version. |
-| transport_codes | 4 (optional)                     | 2x 16-bit transport codes (if ROUTE_TYPE_TRANSPORT_*)     |
-| path_len        | 1                                | Length of the path field in bytes.                        |
-| path            | up to 64 (`MAX_PATH_SIZE`)       | Stores the routing path if applicable.                    |
-| payload         | up to 184 (`MAX_PACKET_PAYLOAD`) | The actual data being transmitted.                        |
-
-Note: see the [payloads doc](./payloads.md) for more information about the content of payload.
-
-## Header Breakdown
-
-bit 0 means the lowest bit (1s place)
-
-| Bits  | Mask   | Field           | Description                                   |
-|-------|--------|-----------------|-----------------------------------------------|
-| 0-1   | `0x03` | Route Type      | Flood, Direct, Reserved - see below.          |
-| 2-5   | `0x3C` | Payload Type    | Request, Response, ACK, etc. - see below.     |
-| 6-7   | `0xC0` | Payload Version | Versioning of the payload format - see below. |
-
-## Route Type Values
-
-| Value  | Name                          | Description                          |
-|--------|-------------------------------|--------------------------------------|
-| `0x00` | `ROUTE_TYPE_TRANSPORT_FLOOD`  | Flood routing mode + transport codes |
-| `0x01` | `ROUTE_TYPE_FLOOD`            | Flood routing mode (builds up path). |
-| `0x02` | `ROUTE_TYPE_DIRECT`           | Direct route (path is supplied).     |
-| `0x03` | `ROUTE_TYPE_TRANSPORT_DIRECT` | direct route + transport codes       |
-
-## Payload Type Values
-
-| Value  | Name                      | Description                                   |
-|--------|---------------------------|-----------------------------------------------|
-| `0x00` | `PAYLOAD_TYPE_REQ`        | Request (destination/source hashes + MAC).    |
-| `0x01` | `PAYLOAD_TYPE_RESPONSE`   | Response to REQ or ANON_REQ.                  |
-| `0x02` | `PAYLOAD_TYPE_TXT_MSG`    | Plain text message.                           |
-| `0x03` | `PAYLOAD_TYPE_ACK`        | Acknowledgment.                               |
-| `0x04` | `PAYLOAD_TYPE_ADVERT`     | Node advertisement.                           |
-| `0x05` | `PAYLOAD_TYPE_GRP_TXT`    | Group text message (unverified).              |
-| `0x06` | `PAYLOAD_TYPE_GRP_DATA`   | Group datagram (unverified).                  |
-| `0x07` | `PAYLOAD_TYPE_ANON_REQ`   | Anonymous request.                            |
-| `0x08` | `PAYLOAD_TYPE_PATH`       | Returned path.                                |
-| `0x09` | `PAYLOAD_TYPE_TRACE`      | trace a path, collecting SNI for each hop.    |
-| `0x0A` | `PAYLOAD_TYPE_MULTIPART`  | packet is part of a sequence of packets.      |
-| `0x0B` | `PAYLOAD_TYPE_CONTROL`    | control packet data (unencrypted)             |
-| `0x0C` | .                         | reserved                                      |
-| `0x0D` | .                         | reserved                                      |
-| `0x0E` | .                         | reserved                                      |
-| `0x0F` | `PAYLOAD_TYPE_RAW_CUSTOM` | Custom packet (raw bytes, custom encryption). |
-
-## Payload Version Values
-
-| Value  | Version | Description                                       |
-|--------|---------|---------------------------------------------------|
-| `0x00` | 1       | 1-byte src/dest hashes, 2-byte MAC.               |
-| `0x01` | 2       | Future version (e.g., 2-byte hashes, 4-byte MAC). |
-| `0x02` | 3       | Future version.                                   |
-| `0x03` | 4       | Future version.                                   |

docs/payloads.md

@@ -1,5 +1,6 @@
-# Meshcore payloads
-Inside of each [meshcore packet](./packet_structure.md) is a payload, identified by the payload type in the packet header. The types of payloads are:
+# Payload Format
+
+Inside each [MeshCore Packet](./packet_format.md) is a payload, identified by the payload type in the packet header. The types of payloads are:
 
 * Node advertisement.
 * Acknowledgment.
@@ -80,12 +81,12 @@ Returned path, request, response, and plain text messages are all formatted in t
 
 Returned path messages provide a description of the route a packet took from the original author. Receivers will send returned path messages to the author of the original message.
 
-| Field       | Size (bytes) | Description                                                                                  |
-|-------------|--------------|----------------------------------------------------------------------------------------------|
-| path length | 1            | length of next field                                                                         |
-| path        | see above    | a list of node hashes (one byte each) |
-| extra type  | 1            | extra, bundled payload type, eg., acknowledgement or response. Same values as in [packet structure](./packet_structure.md) |
-| extra       | rest of data | extra, bundled payload content, follows same format as main content defined by this document |
+| Field       | Size (bytes) | Description                                                                                                          |
+|-------------|--------------|----------------------------------------------------------------------------------------------------------------------|
+| path length | 1            | length of next field                                                                                                 |
+| path        | see above    | a list of node hashes (one byte each)                                                                                |
+| extra type  | 1            | extra, bundled payload type, eg., acknowledgement or response. Same values as in [Packet Format](./packet_format.md) |
+| extra       | rest of data | extra, bundled payload content, follows same format as main content defined by this document                         |
 
 ## Request
 
@@ -269,4 +270,4 @@ The plaintext contained in the ciphertext matches the format described in [plain
 
 # Custom packet
 
-Custom packets have no defined format.
+Custom packets have no defined format.

docs/qr_codes.md

@@ -0,0 +1,34 @@
+# QR Codes
+
+This document provides an overview of QR Code formats that can be used for sharing MeshCore channels and contacts. The formats described below are supported by the MeshCore mobile app.
+
+## Add Channel
+
+**Example URL**:
+
+```
+meshcore://channel/add?name=Public&secret=8b3387e9c5cdea6ac9e5edbaa115cd72
+```
+
+**Parameters**:
+
+- `name`: Channel name (URL-encoded if needed)
+- `secret`: 16-byte secret represented as 32 hex characters
+
+## Add Contact
+
+**Example URL**:
+
+```
+meshcore://contact/add?name=Example+Contact&public_key=9cd8fcf22a47333b591d96a2b848b73f457b1bb1a3ea2453a885f9e5787765b1&type=1
+```
+
+**Parameters**:
+
+- `name`: Contact name (URL-encoded if needed)
+- `public_key`: 32-byte public key represented as 64 hex characters
+- `type`: numeric contact type
+    - `1`: Companion
+    - `2`: Repeater
+    - `3`: Room Server
+    - `4`: Sensor

docs/terminal_chat_cli.md

@@ -0,0 +1,96 @@
+# Terminal Chat CLI
+
+Below are the commands you can enter into the Terminal Chat clients:
+
+```
+set freq {frequency}
+```
+Set the LoRa frequency. Example:  set freq 915.8
+
+```
+set tx {tx-power-dbm}
+```
+Sets LoRa transmit power in dBm.
+
+```
+set name {name}
+```
+Sets your advertisement name.
+
+```
+set lat {latitude}
+```
+Sets your advertisement map latitude. (decimal degrees)
+
+```
+set lon {longitude}
+```
+Sets your advertisement map longitude. (decimal degrees)
+
+```
+set af {air-time-factor}
+```
+Sets the transmit air-time-factor.
+
+
+```
+time {epoch-secs}
+```
+Set the device clock using UNIX epoch seconds. Example:  time 1738242833
+
+
+```
+advert
+```
+Sends an advertisement packet
+
+```
+clock
+```
+Displays current time per device's clock.
+
+
+```
+ver
+```
+Shows the device version and firmware build date.
+
+```
+card
+```
+Displays *your* 'business card', for other to manually _import_
+
+```
+import {card}
+```
+Imports the given card to your contacts.
+
+```
+list {n}
+```
+List all contacts by most recent. (optional {n}, is the last n by advertisement date)
+
+```
+to
+```
+Shows the name of current recipient contact. (for subsequent 'send' commands)
+
+```
+to {name-prefix}
+```
+Sets the recipient to the _first_ matching contact (in 'list') by the name prefix. (ie. you don't have to type whole name)
+
+```
+send {text}
+```
+Sends the text message (as DM) to current recipient.
+
+```
+reset path
+```
+Resets the path to current recipient, for new path discovery.
+
+```
+public {text}
+```
+Sends the text message to the built-in 'public' group channel

examples/companion_radio/DataStore.cpp

@@ -212,7 +212,7 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
     file.read((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
     file.read((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.read(pad, 1);                                                                     // 62
+    file.read((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
     file.read((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
     file.read((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
     file.read((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
@@ -222,12 +222,14 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));             // 72
     file.read((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy));     // 76
     file.read((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks));                   // 77
-    file.read(pad, 2);                                                                     // 78
+    file.read((uint8_t *)&_prefs.path_hash_mode, sizeof(_prefs.path_hash_mode));           // 78
+    file.read(pad, 1);                                                                     // 79
     file.read((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin));                         // 80
     file.read((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.read((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
     file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
+    file.read((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops));       // 88
 
     file.close();
   }
@@ -247,7 +249,7 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
     file.write((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
     file.write((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.write(pad, 1);                                                                     // 62
+    file.write((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
     file.write((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
     file.write((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
     file.write((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
@@ -257,12 +259,14 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));             // 72
     file.write((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy));     // 76
     file.write((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks));                   // 77
-    file.write(pad, 2);                                                                     // 78
+    file.write((uint8_t *)&_prefs.path_hash_mode, sizeof(_prefs.path_hash_mode));           // 78
+    file.write(pad, 1);                                                                     // 79
     file.write((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin));                         // 80
     file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
     file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
+    file.write((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops));      // 88
 
     file.close();
   }

examples/companion_radio/MyMesh.cpp

@@ -56,6 +56,8 @@
 #define CMD_SEND_ANON_REQ             57
 #define CMD_SET_AUTOADD_CONFIG        58
 #define CMD_GET_AUTOADD_CONFIG        59
+#define CMD_GET_ALLOWED_REPEAT_FREQ   60
+#define CMD_SET_PATH_HASH_MODE        61
 
 // Stats sub-types for CMD_GET_STATS
 #define STATS_TYPE_CORE               0
@@ -88,6 +90,7 @@
 #define RESP_CODE_TUNING_PARAMS       23
 #define RESP_CODE_STATS               24   // v8+, second byte is stats type
 #define RESP_CODE_AUTOADD_CONFIG      25
+#define RESP_ALLOWED_REPEAT_FREQ      26
 
 #define SEND_TIMEOUT_BASE_MILLIS        500
 #define FLOOD_SEND_TIMEOUT_FACTOR       16.0f
@@ -255,6 +258,15 @@ int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
   return (int)((pow(_prefs.rx_delay_base, 0.85f - score) - 1.0) * air_time);
 }
 
+uint32_t MyMesh::getRetransmitDelay(const mesh::Packet *packet) {
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * 0.5f);
+  return getRNG()->nextInt(0, 5*t + 1);
+}
+uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * 0.2f);
+  return getRNG()->nextInt(0, 5*t + 1);
+}
+
 uint8_t MyMesh::getExtraAckTransmitCount() const {
   return _prefs.multi_acks;
 }
@@ -306,6 +318,10 @@ bool MyMesh::shouldOverwriteWhenFull() const {
   return (_prefs.autoadd_config & AUTO_ADD_OVERWRITE_OLDEST) != 0;
 }
 
+uint8_t MyMesh::getAutoAddMaxHops() const {
+  return _prefs.autoadd_max_hops;
+}
+
 void MyMesh::onContactOverwrite(const uint8_t* pub_key) {
     _store->deleteBlobByKey(pub_key, PUB_KEY_SIZE); // delete from storage
   if (_serial->isConnected()) {
@@ -338,7 +354,7 @@ void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path
   }
 
   // add inbound-path to mem cache
-  if (path && path_len <= sizeof(AdvertPath::path)) {  // check path is valid
+  if (path && mesh::Packet::isValidPathLen(path_len)) {  // check path is valid
     AdvertPath* p = advert_paths;
     uint32_t oldest = 0xFFFFFFFF;
     for (int i = 0; i < ADVERT_PATH_TABLE_SIZE; i++) {   // check if already in table, otherwise evict oldest
@@ -355,8 +371,7 @@ void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path
     memcpy(p->pubkey_prefix, contact.id.pub_key, sizeof(p->pubkey_prefix));
     strcpy(p->name, contact.name);
     p->recv_timestamp = getRTCClock()->getCurrentTime();
-    p->path_len = path_len;
-    memcpy(p->path, path, p->path_len);
+    p->path_len = mesh::Packet::copyPath(p->path, path, path_len);
   }
 
   if (!is_new) dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY); // only schedule lazy write for contacts that are in contacts[]
@@ -455,26 +470,30 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* packet) {
   return false;
 }
 
+bool MyMesh::allowPacketForward(const mesh::Packet* packet) {
+  return _prefs.client_repeat != 0;
+}
+
 void MyMesh::sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis) {
   // TODO: dynamic send_scope, depending on recipient and current 'home' Region
   if (send_scope.isNull()) {
-    sendFlood(pkt, delay_millis);
+    sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
   } else {
     uint16_t codes[2];
     codes[0] = send_scope.calcTransportCode(pkt);
     codes[1] = 0;  // REVISIT: set to 'home' Region, for sender/return region?
-    sendFlood(pkt, codes, delay_millis);
+    sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1);
   }
 }
 void MyMesh::sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis) {
   // TODO: have per-channel send_scope
   if (send_scope.isNull()) {
-    sendFlood(pkt, delay_millis);
+    sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
   } else {
     uint16_t codes[2];
     codes[0] = send_scope.calcTransportCode(pkt);
     codes[1] = 0;  // REVISIT: set to 'home' Region, for sender/return region?
-    sendFlood(pkt, codes, delay_millis);
+    sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1);
   }
 }
 
@@ -671,7 +690,7 @@ bool MyMesh::onContactPathRecv(ContactInfo& contact, uint8_t* in_path, uint8_t i
     if (tag == pending_discovery) {  // check for matching response tag)
       pending_discovery = 0;
 
-      if (in_path_len > MAX_PATH_SIZE || out_path_len > MAX_PATH_SIZE) {
+      if (!mesh::Packet::isValidPathLen(in_path_len) || !mesh::Packet::isValidPathLen(out_path_len)) {
         MESH_DEBUG_PRINTLN("onContactPathRecv, invalid path sizes: %d, %d", in_path_len, out_path_len);
       } else {
         int i = 0;
@@ -680,11 +699,9 @@ bool MyMesh::onContactPathRecv(ContactInfo& contact, uint8_t* in_path, uint8_t i
         memcpy(&out_frame[i], contact.id.pub_key, 6);
         i += 6; // pub_key_prefix
         out_frame[i++] = out_path_len;
-        memcpy(&out_frame[i], out_path, out_path_len);
-        i += out_path_len;
+        i += mesh::Packet::writePath(&out_frame[i], out_path, out_path_len);
         out_frame[i++] = in_path_len;
-        memcpy(&out_frame[i], in_path, in_path_len);
-        i += in_path_len;
+        i += mesh::Packet::writePath(&out_frame[i], in_path, in_path_len);
         // NOTE: telemetry data in 'extra' is discarded at present
 
         _serial->writeFrame(out_frame, i);
@@ -770,9 +787,10 @@ uint32_t MyMesh::calcFloodTimeoutMillisFor(uint32_t pkt_airtime_millis) const {
   return SEND_TIMEOUT_BASE_MILLIS + (FLOOD_SEND_TIMEOUT_FACTOR * pkt_airtime_millis);
 }
 uint32_t MyMesh::calcDirectTimeoutMillisFor(uint32_t pkt_airtime_millis, uint8_t path_len) const {
+  uint8_t path_hash_count = path_len & 63;
   return SEND_TIMEOUT_BASE_MILLIS +
          ((pkt_airtime_millis * DIRECT_SEND_PERHOP_FACTOR + DIRECT_SEND_PERHOP_EXTRA_MILLIS) *
-          (path_len + 1));
+          (path_hash_count + 1));
 }
 
 void MyMesh::onSendTimeout() {}
@@ -793,7 +811,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0; // one half
+  _prefs.airtime_factor = 1.0;
   strcpy(_prefs.node_name, "NONAME");
   _prefs.freq = LORA_FREQ;
   _prefs.sf = LORA_SF;
@@ -881,6 +899,24 @@ uint32_t MyMesh::getBLEPin() {
   return _active_ble_pin;
 }
 
+struct FreqRange {
+  uint32_t lower_freq, upper_freq;
+};
+
+static FreqRange repeat_freq_ranges[] = {
+  { 433000, 433000 },
+  { 869000, 869000 },
+  { 918000, 918000 }
+};
+
+bool MyMesh::isValidClientRepeatFreq(uint32_t f) const {
+  for (int i = 0; i < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]); i++) {
+    auto r = &repeat_freq_ranges[i];
+    if (f >= r->lower_freq && f <= r->upper_freq) return true;
+  }
+  return false;
+}
+
 void MyMesh::startInterface(BaseSerialInterface &serial) {
   _serial = &serial;
   serial.enable();
@@ -904,6 +940,8 @@ void MyMesh::handleCmdFrame(size_t len) {
     i += 40;
     StrHelper::strzcpy((char *)&out_frame[i], FIRMWARE_VERSION, 20);
     i += 20;
+    out_frame[i++] = _prefs.client_repeat;   // v9+
+    out_frame[i++] = _prefs.path_hash_mode;  // v10+
     _serial->writeFrame(out_frame, i);
   } else if (cmd_frame[0] == CMD_APP_START &&
              len >= 8) { // sent when app establishes connection, respond with node ID
@@ -1081,7 +1119,8 @@ void MyMesh::handleCmdFrame(size_t len) {
     }
     if (pkt) {
       if (len >= 2 && cmd_frame[1] == 1) { // optional param (1 = flood, 0 = zero hop)
-        sendFlood(pkt);
+        unsigned long delay_millis = 0;
+        sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
       } else {
         sendZeroHop(pkt);
       }
@@ -1093,7 +1132,7 @@ void MyMesh::handleCmdFrame(size_t len) {
     uint8_t *pub_key = &cmd_frame[1];
     ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
     if (recipient) {
-      recipient->out_path_len = -1;
+      recipient->out_path_len = OUT_PATH_UNKNOWN;
       // recipient->lastmod = ??   shouldn't be needed, app already has this version of contact
       dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
       writeOKFrame();
@@ -1208,13 +1247,20 @@ void MyMesh::handleCmdFrame(size_t len) {
     i += 4;
     uint8_t sf = cmd_frame[i++];
     uint8_t cr = cmd_frame[i++];
+    uint8_t repeat = 0;  // default - false
+    if (len > i) {
+      repeat = cmd_frame[i++];   // FIRMWARE_VER_CODE  9+
+    }
 
-    if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
+    if (repeat && !isValidClientRepeatFreq(freq)) {
+      writeErrFrame(ERR_CODE_ILLEGAL_ARG);
+    } else if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
         bw <= 500000) {
       _prefs.sf = sf;
       _prefs.cr = cr;
       _prefs.freq = (float)freq / 1000.0;
       _prefs.bw = (float)bw / 1000.0;
+      _prefs.client_repeat = repeat;
       savePrefs();
 
       radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
@@ -1271,6 +1317,14 @@ void MyMesh::handleCmdFrame(size_t len) {
     }
     savePrefs();
     writeOKFrame();
+  } else if (cmd_frame[0] == CMD_SET_PATH_HASH_MODE && cmd_frame[1] == 0 && len >= 3) {
+    if (cmd_frame[2] >= 3) {
+      writeErrFrame(ERR_CODE_ILLEGAL_ARG);
+    } else {
+      _prefs.path_hash_mode = cmd_frame[2];
+      savePrefs();
+      writeOKFrame();
+    }
   } else if (cmd_frame[0] == CMD_REBOOT && memcmp(&cmd_frame[1], "reboot", 6) == 0) {
     if (dirty_contacts_expiry) { // is there are pending dirty contacts write needed?
       saveContacts();
@@ -1408,7 +1462,7 @@ void MyMesh::handleCmdFrame(size_t len) {
       memset(&req_data[2], 0, 3);  // reserved
       getRNG()->random(&req_data[5], 4);   // random blob to help make packet-hash unique
       auto save = recipient->out_path_len;    // temporarily force sendRequest() to flood
-      recipient->out_path_len = -1;
+      recipient->out_path_len = OUT_PATH_UNKNOWN;
       int result = sendRequest(*recipient, req_data, sizeof(req_data), tag, est_timeout);
       recipient->out_path_len = save;
       if (result == MSG_SEND_FAILED) {
@@ -1645,11 +1699,12 @@ void MyMesh::handleCmdFrame(size_t len) {
       }
     }
     if (found) {
-      out_frame[0] = RESP_CODE_ADVERT_PATH;
-      memcpy(&out_frame[1], &found->recv_timestamp, 4);
-      out_frame[5] = found->path_len;
-      memcpy(&out_frame[6], found->path, found->path_len);
-      _serial->writeFrame(out_frame, 6 + found->path_len);
+      int i = 0;
+      out_frame[i++] = RESP_CODE_ADVERT_PATH;
+      memcpy(&out_frame[i], &found->recv_timestamp, 4); i += 4;
+      out_frame[i++] = found->path_len;
+      i += mesh::Packet::writePath(&out_frame[i], found->path, found->path_len);
+      _serial->writeFrame(out_frame, i);
     } else {
       writeErrFrame(ERR_CODE_NOT_FOUND);
     }
@@ -1734,12 +1789,25 @@ void MyMesh::handleCmdFrame(size_t len) {
     }
   } else if (cmd_frame[0] == CMD_SET_AUTOADD_CONFIG) {
     _prefs.autoadd_config = cmd_frame[1];
+    if (len >= 3) {
+      _prefs.autoadd_max_hops = min(cmd_frame[2], (uint8_t)64);
+    }
     savePrefs();
-    writeOKFrame();  
+    writeOKFrame();
   } else if (cmd_frame[0] == CMD_GET_AUTOADD_CONFIG) {
     int i = 0;
     out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
     out_frame[i++] = _prefs.autoadd_config;
+    out_frame[i++] = _prefs.autoadd_max_hops;
+    _serial->writeFrame(out_frame, i);
+  } else if (cmd_frame[0] == CMD_GET_ALLOWED_REPEAT_FREQ) {
+    int i = 0;
+    out_frame[i++] = RESP_ALLOWED_REPEAT_FREQ;
+    for (int k = 0; k < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]) && i + 8 < sizeof(out_frame); k++) {
+      auto r = &repeat_freq_ranges[k];
+      memcpy(&out_frame[i], &r->lower_freq, 4); i += 4;
+      memcpy(&out_frame[i], &r->upper_freq, 4); i += 4;
+    }
     _serial->writeFrame(out_frame, i);
   } else {
     writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);

examples/companion_radio/MyMesh.h

@@ -5,14 +5,14 @@
 #include "AbstractUITask.h"
 
 /*------------ Frame Protocol --------------*/
-#define FIRMWARE_VER_CODE 8
+#define FIRMWARE_VER_CODE 10
 
 #ifndef FIRMWARE_BUILD_DATE
-#define FIRMWARE_BUILD_DATE "29 Jan 2026"
+#define FIRMWARE_BUILD_DATE "6 Mar 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-#define FIRMWARE_VERSION "v1.12.0"
+#define FIRMWARE_VERSION "v1.14.0"
 #endif
 
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -106,8 +106,11 @@ protected:
   float getAirtimeBudgetFactor() const override;
   int getInterferenceThreshold() const override;
   int calcRxDelay(float score, uint32_t air_time) const override;
+  uint32_t getRetransmitDelay(const mesh::Packet *packet) override;
+  uint32_t getDirectRetransmitDelay(const mesh::Packet *packet) override;
   uint8_t getExtraAckTransmitCount() const override;
   bool filterRecvFloodPacket(mesh::Packet* packet) override;
+  bool allowPacketForward(const mesh::Packet* packet) override;
 
   void sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis=0) override;
   void sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis=0) override;
@@ -116,6 +119,7 @@ protected:
   bool isAutoAddEnabled() const override;
   bool shouldAutoAddContactType(uint8_t type) const override;
   bool shouldOverwriteWhenFull() const override;
+  uint8_t getAutoAddMaxHops() const override;
   void onContactsFull() override;
   void onContactOverwrite(const uint8_t* pub_key) override;
   bool onContactPathRecv(ContactInfo& from, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
@@ -176,6 +180,7 @@ private:
 
   void checkCLIRescueCmd();
   void checkSerialInterface();
+  bool isValidClientRepeatFreq(uint32_t f) const;
 
   // helpers, short-cuts
   void saveChannels() { _store->saveChannels(this); }

examples/companion_radio/NodePrefs.h

@@ -28,4 +28,7 @@ struct NodePrefs {  // persisted to file
   uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
   uint32_t gps_interval;     // GPS read interval in seconds
   uint8_t autoadd_config;    // bitmask for auto-add contacts config
+  uint8_t client_repeat;
+  uint8_t path_hash_mode;    // which path mode to use when sending
+  uint8_t autoadd_max_hops;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
 };

examples/companion_radio/ui-new/UITask.cpp

@@ -131,6 +131,14 @@ class HomeScreen : public UIScreen {
     // fill the battery based on the percentage
     int fillWidth = (batteryPercentage * (iconWidth - 4)) / 100;
     display.fillRect(iconX + 2, iconY + 2, fillWidth, iconHeight - 4);
+
+    // show muted icon if buzzer is muted
+#ifdef PIN_BUZZER
+    if (_task->isBuzzerQuiet()) {
+      display.setColor(DisplayDriver::RED);
+      display.drawXbm(iconX - 9, iconY + 1, muted_icon, 8, 8);
+    }
+#endif
   }
 
   CayenneLPP sensors_lpp;

examples/companion_radio/ui-new/UITask.h

@@ -78,6 +78,14 @@ public:
   bool hasDisplay() const { return _display != NULL; }
   bool isButtonPressed() const;
 
+  bool isBuzzerQuiet() { 
+#ifdef PIN_BUZZER
+    return buzzer.isQuiet();
+#else
+    return true;
+#endif
+  }
+
   void toggleBuzzer();
   bool getGPSState();
   void toggleGPS();

examples/companion_radio/ui-new/icons.h

@@ -115,4 +115,8 @@ static const uint8_t advert_icon[] = {
 0x38, 0x00, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x30,
 0x04, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static const uint8_t muted_icon[] = {
+  0x20, 0x6a, 0xea, 0xe4, 0xe4, 0xea, 0x6a, 0x20
 };

examples/simple_repeater/MyMesh.cpp

@@ -129,7 +129,7 @@ uint8_t MyMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t* secr
   }
 
   if (is_flood) {
-    client->out_path_len = -1;  // need to rediscover out_path
+    client->out_path_len = OUT_PATH_UNKNOWN;  // need to rediscover out_path
   }
 
   uint32_t now = getRTCClock()->getCurrentTimeUnique();
@@ -147,9 +147,12 @@ uint8_t MyMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t* secr
 uint8_t MyMesh::handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
   if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
     // request data has: {reply-path-len}{reply-path}
-    reply_path_len = *data++ & 0x3F;
-    memcpy(reply_path, data, reply_path_len);
-    // data += reply_path_len;
+    reply_path_len = *data & 63;
+    reply_path_hash_size = (*data >> 6) + 1;
+    data++;
+
+    memcpy(reply_path, data, ((uint8_t)reply_path_len) * reply_path_hash_size);
+    // data += (uint8_t)reply_path_len * reply_path_hash_size;
 
     memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
     uint32_t now = getRTCClock()->getCurrentTime();
@@ -163,9 +166,12 @@ uint8_t MyMesh::handleAnonRegionsReq(const mesh::Identity& sender, uint32_t send
 uint8_t MyMesh::handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
   if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
     // request data has: {reply-path-len}{reply-path}
-    reply_path_len = *data++ & 0x3F;
-    memcpy(reply_path, data, reply_path_len);
-    // data += reply_path_len;
+    reply_path_len = *data & 63;
+    reply_path_hash_size = (*data >> 6) + 1;
+    data++;
+
+    memcpy(reply_path, data, ((uint8_t)reply_path_len) * reply_path_hash_size);
+    // data += (uint8_t)reply_path_len * reply_path_hash_size;
 
     memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
     uint32_t now = getRTCClock()->getCurrentTime();
@@ -180,9 +186,12 @@ uint8_t MyMesh::handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender
 uint8_t MyMesh::handleAnonClockReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
   if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
     // request data has: {reply-path-len}{reply-path}
-    reply_path_len = *data++ & 0x3F;
-    memcpy(reply_path, data, reply_path_len);
-    // data += reply_path_len;
+    reply_path_len = *data & 63;
+    reply_path_hash_size = (*data >> 6) + 1;
+    data++;
+
+    memcpy(reply_path, data, ((uint8_t)reply_path_len) * reply_path_hash_size);
+    // data += (uint8_t)reply_path_len * reply_path_hash_size;
 
     memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
     uint32_t now = getRTCClock()->getCurrentTime();
@@ -292,6 +301,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
 
       // create copy of neighbours list, skipping empty entries so we can sort it separately from main list
       int16_t neighbours_count = 0;
+#if MAX_NEIGHBOURS
       NeighbourInfo* sorted_neighbours[MAX_NEIGHBOURS];
       for (int i = 0; i < MAX_NEIGHBOURS; i++) {
         auto neighbour = &neighbours[i];
@@ -327,6 +337,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
           return a->snr < b->snr; // asc
         });
       }
+#endif
 
       // build results buffer
       int results_count = 0;
@@ -341,6 +352,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
           break;
         }
 
+#if MAX_NEIGHBOURS
         // add next neighbour to results
         auto neighbour = sorted_neighbours[index + offset];
         uint32_t heard_seconds_ago = getRTCClock()->getCurrentTime() - neighbour->heard_timestamp;
@@ -348,6 +360,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
         memcpy(&results_buffer[results_offset], &heard_seconds_ago, 4); results_offset += 4;
         memcpy(&results_buffer[results_offset], &neighbour->snr, 1); results_offset += 1;
         results_count++;
+#endif
 
       }
 
@@ -383,13 +396,53 @@ File MyMesh::openAppend(const char *fname) {
 #endif
 }
 
+static uint8_t max_loop_minimal[] =  { 0, /* 1-byte */  4, /* 2-byte */  2, /* 3-byte */  1 };
+static uint8_t max_loop_moderate[] = { 0, /* 1-byte */  2, /* 2-byte */  1, /* 3-byte */  1 };
+static uint8_t max_loop_strict[] =   { 0, /* 1-byte */  1, /* 2-byte */  1, /* 3-byte */  1 };
+
+bool MyMesh::isLooped(const mesh::Packet* packet, const uint8_t max_counters[]) {
+  uint8_t hash_size = packet->getPathHashSize();
+  uint8_t hash_count = packet->getPathHashCount();
+  uint8_t n = 0;
+  const uint8_t* path = packet->path;
+  while (hash_count > 0) {      // count how many times this node is already in the path
+    if (self_id.isHashMatch(path, hash_size)) n++;
+    hash_count--;
+    path += hash_size;
+  }
+  return n >= max_counters[hash_size];
+}
+
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood() && packet->path_len >= _prefs.flood_max) return false;
+  if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
   if (packet->isRouteFlood() && recv_pkt_region == NULL) {
     MESH_DEBUG_PRINTLN("allowPacketForward: unknown transport code, or wildcard not allowed for FLOOD packet");
     return false;
   }
+  if (packet->isRouteFlood() && _prefs.loop_detect != LOOP_DETECT_OFF) {
+    const uint8_t* maximums;
+    if (_prefs.loop_detect == LOOP_DETECT_MINIMAL) {
+      maximums = max_loop_minimal;
+    } else if (_prefs.loop_detect == LOOP_DETECT_MODERATE) {
+      maximums = max_loop_moderate;
+    } else {
+      maximums = max_loop_strict;
+    }
+    if (isLooped(packet, maximums)) {
+      MESH_DEBUG_PRINTLN("allowPacketForward: FLOOD packet loop detected!");
+      return false;
+    }
+  }
+  // Limit flood advert paket forwarding using a probabilistic reduction defined by P(h) = 0.308^(hops-1)
+  // https://github.com/meshcore-dev/MeshCore/issues/1223
+  if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->isRouteFlood()) {
+    double roll_dice = (double)rand() / RAND_MAX;
+    double forw_prob = pow(_prefs.flood_advert_base, packet->path_len - 1);
+    if (roll_dice > forw_prob)
+      return false;
+  }
+
   return true;
 }
 
@@ -480,11 +533,11 @@ int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
 }
 
 uint32_t MyMesh::getRetransmitDelay(const mesh::Packet *packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.tx_delay_factor);
   return getRNG()->nextInt(0, 5*t + 1);
 }
 uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
   return getRNG()->nextInt(0, 5*t + 1);
 }
 
@@ -493,7 +546,10 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
   if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
     recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
   } else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
-    if (region_map.getWildcard().flags & REGION_DENY_FLOOD) {
+      if ((pkt->getPayloadType() == PAYLOAD_TYPE_GRP_TXT ||
+           pkt->getPayloadType() == PAYLOAD_TYPE_GRP_DATA ||
+           pkt->getPayloadType() == PAYLOAD_TYPE_ADVERT) &&
+          region_map.getWildcard().flags & REGION_DENY_FLOOD) {
       recv_pkt_region = NULL;
     } else {
       recv_pkt_region =  &region_map.getWildcard();
@@ -534,13 +590,14 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
       // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
       mesh::Packet* path = createPathReturn(sender, secret, packet->path, packet->path_len,
                                             PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
-      if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+      if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     } else if (reply_path_len < 0) {
       mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
-      if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY);
+      if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     } else {
       mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
-      if (reply) sendDirect(reply, reply_path, reply_path_len, SERVER_RESPONSE_DELAY);
+      uint8_t path_len = ((reply_path_hash_size - 1) << 6) | (reply_path_len & 63);
+      if (reply) sendDirect(reply, reply_path,  path_len, SERVER_RESPONSE_DELAY);
     }
   }
 }
@@ -609,15 +666,15 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
         // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
         mesh::Packet *path = createPathReturn(client->id, secret, packet->path, packet->path_len,
                                               PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
-        if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+        if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
       } else {
         mesh::Packet *reply =
             createDatagram(PAYLOAD_TYPE_RESPONSE, client->id, secret, reply_data, reply_len);
         if (reply) {
-          if (client->out_path_len >= 0) { // we have an out_path, so send DIRECT
+          if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT
             sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY);
           } else {
-            sendFlood(reply, SERVER_RESPONSE_DELAY);
+            sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
           }
         }
       }
@@ -647,8 +704,8 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
 
         mesh::Packet *ack = createAck(ack_hash);
         if (ack) {
-          if (client->out_path_len < 0) {
-            sendFlood(ack, TXT_ACK_DELAY);
+          if (client->out_path_len == OUT_PATH_UNKNOWN) {
+            sendFlood(ack, TXT_ACK_DELAY, packet->getPathHashSize());
           } else {
             sendDirect(ack, client->out_path, client->out_path_len, TXT_ACK_DELAY);
           }
@@ -675,8 +732,8 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
 
         auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, secret, temp, 5 + text_len);
         if (reply) {
-          if (client->out_path_len < 0) {
-            sendFlood(reply, CLI_REPLY_DELAY_MILLIS);
+          if (client->out_path_len == OUT_PATH_UNKNOWN) {
+            sendFlood(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize());
           } else {
             sendDirect(reply, client->out_path, client->out_path_len, CLI_REPLY_DELAY_MILLIS);
           }
@@ -697,7 +754,8 @@ bool MyMesh::onPeerPathRecv(mesh::Packet *packet, int sender_idx, const uint8_t
     MESH_DEBUG_PRINTLN("PATH to client, path_len=%d", (uint32_t)path_len);
     auto client = acl.getClientByIdx(i);
 
-    memcpy(client->out_path, path, client->out_path_len = path_len); // store a copy of path, for sendDirect()
+    // store a copy of path, for sendDirect()
+    client->out_path_len = mesh::Packet::copyPath(client->out_path, path, path_len);
     client->last_activity = getRTCClock()->getCurrentTime();
   } else {
     MESH_DEBUG_PRINTLN("onPeerPathRecv: invalid peer idx: %d", i);
@@ -738,6 +796,47 @@ void MyMesh::onControlDataRecv(mesh::Packet* packet) {
         sendZeroHop(resp, getRetransmitDelay(resp)*4);  // apply random delay (widened x4), as multiple nodes can respond to this
       }
     }
+  } else if (type == CTL_TYPE_NODE_DISCOVER_RESP && packet->payload_len >= 6) {
+    uint8_t node_type = packet->payload[0] & 0x0F;
+    if (node_type != ADV_TYPE_REPEATER) {
+      return;
+    }
+    if (packet->payload_len < 6 + PUB_KEY_SIZE) {
+      MESH_DEBUG_PRINTLN("onControlDataRecv: DISCOVER_RESP pubkey too short: %d", (uint32_t)packet->payload_len);
+      return;
+    }
+
+    if (pending_discover_tag == 0 || millisHasNowPassed(pending_discover_until)) {
+      pending_discover_tag = 0;
+      return;
+    }
+    uint32_t tag;
+    memcpy(&tag, &packet->payload[2], 4);
+    if (tag != pending_discover_tag) {
+      return;
+    }
+
+    mesh::Identity id(&packet->payload[6]);
+    if (id.matches(self_id)) {
+      return;
+    }
+    putNeighbour(id, rtc_clock.getCurrentTime(), packet->getSNR());
+  }
+}
+
+void MyMesh::sendNodeDiscoverReq() {
+  uint8_t data[10];
+  data[0] = CTL_TYPE_NODE_DISCOVER_REQ; // prefix_only=0
+  data[1] = (1 << ADV_TYPE_REPEATER);
+  getRNG()->random(&data[2], 4); // tag
+  memcpy(&pending_discover_tag, &data[2], 4);
+  pending_discover_until = futureMillis(60000);
+  uint32_t since = 0;
+  memcpy(&data[6], &since, 4);
+
+  auto pkt = createControlData(data, sizeof(data));
+  if (pkt) {
+    sendZeroHop(pkt);
   }
 }
 
@@ -768,10 +867,10 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;   // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base = 0.0f;   // turn off by default, was 10.0;
   _prefs.tx_delay_factor = 0.5f; // was 0.25f
-  _prefs.direct_tx_delay_factor = 0.2f; // was zero
+  _prefs.direct_tx_delay_factor = 0.3f; // was 0.2
   StrHelper::strncpy(_prefs.node_name, ADVERT_NAME, sizeof(_prefs.node_name));
   _prefs.node_lat = ADVERT_LAT;
   _prefs.node_lon = ADVERT_LON;
@@ -782,7 +881,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.cr = LORA_CR;
   _prefs.tx_power_dbm = LORA_TX_POWER;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
-  _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_interval = 0; // 12 hours
+  _prefs.flood_advert_base = 0.308f;
   _prefs.flood_max = 64;
   _prefs.interference_threshold = 0; // disabled
 
@@ -801,6 +901,9 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
 
   _prefs.adc_multiplier = 0.0f; // 0.0f means use default board multiplier
+
+  pending_discover_tag = 0;
+  pending_discover_until = 0;
 }
 
 void MyMesh::begin(FILESYSTEM *fs) {
@@ -858,7 +961,7 @@ void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet *pkt = createSelfAdvert();
   if (pkt) {
     if (flood) {
-      sendFlood(pkt, delay_millis);
+      sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
     } else {
       sendZeroHop(pkt, delay_millis);
     }
@@ -1168,6 +1271,15 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
     } else {
       strcpy(reply, "Err - ??");
     }
+  } else if (memcmp(command, "discover.neighbors", 18) == 0) {
+    const char* sub = command + 18;
+    while (*sub == ' ') sub++;
+    if (*sub != 0) {
+      strcpy(reply, "Err - discover.neighbors has no options");
+    } else {
+      sendNodeDiscoverReq();
+      strcpy(reply, "OK - Discover sent");
+    }
   } else{
     _cli.handleCommand(sender_timestamp, command, reply);  // common CLI commands
   }

examples/simple_repeater/MyMesh.h

@@ -69,11 +69,11 @@ struct NeighbourInfo {
 };
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
+  #define FIRMWARE_BUILD_DATE   "6 Mar 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.12.0"
+  #define FIRMWARE_VERSION   "v1.14.0"
 #endif
 
 #define FIRMWARE_ROLE "repeater"
@@ -92,11 +92,14 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
   uint8_t reply_path[MAX_PATH_SIZE];
   int8_t  reply_path_len;
+  uint8_t reply_path_hash_size;
   TransportKeyStore key_store;
   RegionMap region_map, temp_map;
   RegionEntry* load_stack[8];
   RegionEntry* recv_pkt_region;
   RateLimiter discover_limiter, anon_limiter;
+  uint32_t pending_discover_tag;
+  unsigned long pending_discover_until;
   bool region_load_active;
   unsigned long dirty_contacts_expiry;
 #if MAX_NEIGHBOURS
@@ -116,6 +119,7 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
 #endif
 
   void putNeighbour(const mesh::Identity& id, uint32_t timestamp, float snr);
+  void sendNodeDiscoverReq();
   uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood);
   uint8_t handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
   uint8_t handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
@@ -124,6 +128,7 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   mesh::Packet* createSelfAdvert();
 
   File openAppend(const char* fname);
+  bool isLooped(const mesh::Packet* packet, const uint8_t max_counters[]);
 
 protected:
   float getAirtimeBudgetFactor() const override {

examples/simple_room_server/MyMesh.cpp

@@ -73,13 +73,15 @@ void MyMesh::pushPostToClient(ClientInfo *client, PostInfo &post) {
 
   auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, client->shared_secret, reply_data, len);
   if (reply) {
-    if (client->out_path_len < 0) {
-      sendFlood(reply);
+    if (client->out_path_len == OUT_PATH_UNKNOWN) {
+      unsigned long delay_millis = 0;
+      sendFlood(reply, delay_millis, _prefs.path_hash_mode + 1);
       client->extra.room.ack_timeout = futureMillis(PUSH_ACK_TIMEOUT_FLOOD);
     } else {
       sendDirect(reply, client->out_path, client->out_path_len);
-      client->extra.room.ack_timeout =
-          futureMillis(PUSH_TIMEOUT_BASE + PUSH_ACK_TIMEOUT_FACTOR * (client->out_path_len + 1));
+
+      uint8_t path_hash_count = client->out_path_len & 63;
+      client->extra.room.ack_timeout = futureMillis(PUSH_TIMEOUT_BASE + PUSH_ACK_TIMEOUT_FACTOR * (path_hash_count + 1));
     }
     _num_post_pushes++; // stats
   } else {
@@ -264,17 +266,27 @@ const char *MyMesh::getLogDateTime() {
 }
 
 uint32_t MyMesh::getRetransmitDelay(const mesh::Packet *packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.tx_delay_factor);
   return getRNG()->nextInt(0, 5*t + 1);
 }
 uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
   return getRNG()->nextInt(0, 5*t + 1);
 }
 
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
   if (packet->isRouteFlood() && packet->path_len >= _prefs.flood_max) return false;
+
+  // Limit flood advert packet forwarding using a probabilistic reduction defined by P(h) = base^(hops-1)
+  // https://github.com/meshcore-dev/MeshCore/issues/1223
+  if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->isRouteFlood()) {
+    double roll_dice = (double)rand() / RAND_MAX;
+    double forw_prob = pow(_prefs.flood_advert_base, packet->path_len - 1);
+    if (roll_dice > forw_prob)
+      return false;
+  }
+
   return true;
 }
 
@@ -333,7 +345,7 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
     }
 
     if (packet->isRouteFlood()) {
-      client->out_path_len = -1;  // need to rediscover out_path
+      client->out_path_len = OUT_PATH_UNKNOWN;  // need to rediscover out_path
     }
 
     uint32_t now = getRTCClock()->getCurrentTimeUnique();
@@ -353,14 +365,14 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
       // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
       mesh::Packet *path = createPathReturn(sender, client->shared_secret, packet->path, packet->path_len,
                                             PAYLOAD_TYPE_RESPONSE, reply_data, 13);
-      if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+      if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     } else {
       mesh::Packet *reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, client->shared_secret, reply_data, 13);
       if (reply) {
-        if (client->out_path_len >= 0) { // we have an out_path, so send DIRECT
+        if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT
           sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY);
         } else {
-          sendFlood(reply, SERVER_RESPONSE_DELAY);
+          sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
         }
       }
     }
@@ -448,9 +460,9 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
 
       uint32_t delay_millis;
       if (send_ack) {
-        if (client->out_path_len < 0) {
+        if (client->out_path_len == OUT_PATH_UNKNOWN) {
           mesh::Packet *ack = createAck(ack_hash);
-          if (ack) sendFlood(ack, TXT_ACK_DELAY);
+          if (ack) sendFlood(ack, TXT_ACK_DELAY, packet->getPathHashSize());
           delay_millis = TXT_ACK_DELAY + REPLY_DELAY_MILLIS;
         } else {
           uint32_t d = TXT_ACK_DELAY;
@@ -482,8 +494,8 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
 
         auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, secret, temp, 5 + text_len);
         if (reply) {
-          if (client->out_path_len < 0) {
-            sendFlood(reply, delay_millis + SERVER_RESPONSE_DELAY);
+          if (client->out_path_len == OUT_PATH_UNKNOWN) {
+            sendFlood(reply, delay_millis + SERVER_RESPONSE_DELAY, packet->getPathHashSize());
           } else {
             sendDirect(reply, client->out_path, client->out_path_len, delay_millis + SERVER_RESPONSE_DELAY);
           }
@@ -521,7 +533,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
         // if client sends too quickly, evict()
 
         // RULE: only send keep_alive response DIRECT!
-        if (client->out_path_len >= 0) {
+        if (client->out_path_len != OUT_PATH_UNKNOWN) {
           uint32_t ack_hash; // calc ACK to prove to sender that we got request
           mesh::Utils::sha256((uint8_t *)&ack_hash, 4, data, 9, client->id.pub_key, PUB_KEY_SIZE);
 
@@ -538,14 +550,14 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
             // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
             mesh::Packet *path = createPathReturn(client->id, secret, packet->path, packet->path_len,
                                                   PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
-            if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+            if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
           } else {
             mesh::Packet *reply = createDatagram(PAYLOAD_TYPE_RESPONSE, client->id, secret, reply_data, reply_len);
             if (reply) {
-              if (client->out_path_len >= 0) { // we have an out_path, so send DIRECT
+              if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT
                 sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY);
               } else {
-                sendFlood(reply, SERVER_RESPONSE_DELAY);
+                sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
               }
             }
           }
@@ -563,7 +575,7 @@ bool MyMesh::onPeerPathRecv(mesh::Packet *packet, int sender_idx, const uint8_t
   if (i >= 0 && i < acl.getNumClients()) { // get from our known_clients table (sender SHOULD already be known in this context)
     MESH_DEBUG_PRINTLN("PATH to client, path_len=%d", (uint32_t)path_len);
     auto client = acl.getClientByIdx(i);
-    memcpy(client->out_path, path, client->out_path_len = path_len); // store a copy of path, for sendDirect()
+    client->out_path_len = mesh::Packet::copyPath(client->out_path, path, path_len); // store a copy of path, for sendDirect()
     client->last_activity = getRTCClock()->getCurrentTime();
   } else {
     MESH_DEBUG_PRINTLN("onPeerPathRecv: invalid peer idx: %d", i);
@@ -597,7 +609,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;   // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base = 0.0f;   // off by default, was 10.0
   _prefs.tx_delay_factor = 0.5f; // was 0.25f;
   _prefs.direct_tx_delay_factor = 0.2f; // was zero
@@ -613,6 +625,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.disable_fwd = 1;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
   _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_base = 0.308f;
   _prefs.flood_max = 64;
   _prefs.interference_threshold = 0; // disabled
 #ifdef ROOM_PASSWORD
@@ -679,7 +692,7 @@ void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet *pkt = createSelfAdvert();
   if (pkt) {
     if (flood) {
-      sendFlood(pkt, delay_millis);
+      sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
     } else {
       sendZeroHop(pkt, delay_millis);
     }

examples/simple_room_server/MyMesh.h

@@ -26,11 +26,11 @@
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
+  #define FIRMWARE_BUILD_DATE   "6 Mar 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.12.0"
+  #define FIRMWARE_VERSION   "v1.14.0"
 #endif
 
 #ifndef LORA_FREQ

examples/simple_secure_chat/main.cpp

@@ -213,7 +213,7 @@ protected:
   }
 
   void onContactPathUpdated(const ContactInfo& contact) override {
-    Serial.printf("PATH to: %s, path_len=%d\n", contact.name, (int32_t) contact.out_path_len);
+    Serial.printf("PATH to: %s, path_len=%d\n", contact.name, (uint32_t) contact.out_path_len);
     saveContacts();
   }
 
@@ -266,8 +266,9 @@ protected:
     return SEND_TIMEOUT_BASE_MILLIS + (FLOOD_SEND_TIMEOUT_FACTOR * pkt_airtime_millis);
   }
   uint32_t calcDirectTimeoutMillisFor(uint32_t pkt_airtime_millis, uint8_t path_len) const override {
+    uint8_t path_hash_count = path_len & 63;
     return SEND_TIMEOUT_BASE_MILLIS + 
-         ( (pkt_airtime_millis*DIRECT_SEND_PERHOP_FACTOR + DIRECT_SEND_PERHOP_EXTRA_MILLIS) * (path_len + 1));
+         ( (pkt_airtime_millis*DIRECT_SEND_PERHOP_FACTOR + DIRECT_SEND_PERHOP_EXTRA_MILLIS) * (path_hash_count + 1));
   }
 
   void onSendTimeout() override {
@@ -280,7 +281,7 @@ public:
   {
     // defaults
     memset(&_prefs, 0, sizeof(_prefs));
-    _prefs.airtime_factor = 2.0;    // one third
+    _prefs.airtime_factor = 1.0;
     strcpy(_prefs.node_name, "NONAME");
     _prefs.freq = LORA_FREQ;
     _prefs.tx_power_dbm = LORA_TX_POWER;

examples/simple_sensor/SensorMesh.cpp

@@ -258,10 +258,11 @@ void SensorMesh::sendAlert(const ClientInfo* c, Trigger* t) {
 
   auto pkt = createDatagram(PAYLOAD_TYPE_TXT_MSG, c->id, c->shared_secret, data, 5 + text_len);
   if (pkt) {
-    if (c->out_path_len >= 0) {  // we have an out_path, so send DIRECT
+    if (c->out_path_len != OUT_PATH_UNKNOWN) {  // we have an out_path, so send DIRECT
       sendDirect(pkt, c->out_path, c->out_path_len);
     } else {
-      sendFlood(pkt);
+      unsigned long delay_millis = 0;
+      sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
     }
   }
   t->send_expiry = futureMillis(ALERT_ACK_EXPIRY_MILLIS);
@@ -302,7 +303,7 @@ float SensorMesh::getAirtimeBudgetFactor() const {
 
 bool SensorMesh::allowPacketForward(const mesh::Packet* packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood() && packet->path_len >= _prefs.flood_max) return false;
+  if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
   return true;
 }
 
@@ -312,11 +313,11 @@ int SensorMesh::calcRxDelay(float score, uint32_t air_time) const {
 }
 
 uint32_t SensorMesh::getRetransmitDelay(const mesh::Packet* packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.tx_delay_factor);
   return getRNG()->nextInt(0, 6)*t;
 }
 uint32_t SensorMesh::getDirectRetransmitDelay(const mesh::Packet* packet) {
-  uint32_t t = (_radio->getEstAirtimeFor(packet->path_len + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
+  uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * _prefs.direct_tx_delay_factor);
   return getRNG()->nextInt(0, 6)*t;
 }
 int SensorMesh::getInterferenceThreshold() const {
@@ -360,7 +361,7 @@ uint8_t SensorMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t*
   }
 
   if (is_flood) {
-    client->out_path_len = -1;  // need to rediscover out_path
+    client->out_path_len = OUT_PATH_UNKNOWN;  // need to rediscover out_path
   }
 
   uint32_t now = getRTCClock()->getCurrentTimeUnique();
@@ -468,10 +469,10 @@ void SensorMesh::onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, con
       // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
       mesh::Packet* path = createPathReturn(sender, secret, packet->path, packet->path_len,
                                             PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
-      if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+      if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     } else {
       mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
-      if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY);
+      if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     }
   }
 }
@@ -496,10 +497,10 @@ void SensorMesh::getPeerSharedSecret(uint8_t* dest_secret, int peer_idx) {
   }
 }
 
-void SensorMesh::sendAckTo(const ClientInfo& dest, uint32_t ack_hash) {
-  if (dest.out_path_len < 0) {
+void SensorMesh::sendAckTo(const ClientInfo& dest, uint32_t ack_hash, uint8_t path_hash_size) {
+  if (dest.out_path_len == OUT_PATH_UNKNOWN) {
     mesh::Packet* ack = createAck(ack_hash);
-    if (ack) sendFlood(ack, TXT_ACK_DELAY);
+    if (ack) sendFlood(ack, TXT_ACK_DELAY, path_hash_size);
   } else {
     uint32_t d = TXT_ACK_DELAY;
     if (getExtraAckTransmitCount() > 0) {
@@ -537,14 +538,14 @@ void SensorMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_i
         // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
         mesh::Packet* path = createPathReturn(from->id, secret, packet->path, packet->path_len,
                                               PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
-        if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
+        if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
       } else {
         mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, from->id, secret, reply_data, reply_len);
         if (reply) {
-          if (from->out_path_len >= 0) {  // we have an out_path, so send DIRECT
+          if (from->out_path_len != OUT_PATH_UNKNOWN) {  // we have an out_path, so send DIRECT
             sendDirect(reply, from->out_path, from->out_path_len, SERVER_RESPONSE_DELAY);
           } else {
-            sendFlood(reply, SERVER_RESPONSE_DELAY);
+            sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
           }
         }
       }
@@ -567,9 +568,9 @@ void SensorMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_i
             // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the ACK
             mesh::Packet* path = createPathReturn(from->id, secret, packet->path, packet->path_len,
                                                   PAYLOAD_TYPE_ACK, (uint8_t *) &ack_hash, 4);
-            if (path) sendFlood(path, TXT_ACK_DELAY);
+            if (path) sendFlood(path, TXT_ACK_DELAY, packet->getPathHashSize());
           } else {
-            sendAckTo(*from, ack_hash);
+            sendAckTo(*from, ack_hash, packet->getPathHashSize());
           }
         }
       } else if (flags == TXT_TYPE_CLI_DATA) {  
@@ -596,8 +597,8 @@ void SensorMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_i
 
           auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, from->id, secret, temp, 5 + text_len);
           if (reply) {
-            if (from->out_path_len < 0) {
-              sendFlood(reply, CLI_REPLY_DELAY_MILLIS);
+            if (from->out_path_len == OUT_PATH_UNKNOWN) {
+              sendFlood(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize());
             } else {
               sendDirect(reply, from->out_path, from->out_path_len, CLI_REPLY_DELAY_MILLIS);
             }
@@ -666,7 +667,7 @@ bool SensorMesh::onPeerPathRecv(mesh::Packet* packet, int sender_idx, const uint
   MESH_DEBUG_PRINTLN("PATH to contact, path_len=%d", (uint32_t) path_len);
   // NOTE: for this impl, we just replace the current 'out_path' regardless, whenever sender sends us a new out_path.
   // FUTURE: could store multiple out_paths per contact, and try to find which is the 'best'(?)
-  memcpy(from->out_path, path, from->out_path_len = path_len);  // store a copy of path, for sendDirect()
+  from->out_path_len = mesh::Packet::copyPath(from->out_path, path, path_len);  // store a copy of path, for sendDirect()
   from->last_activity = getRTCClock()->getCurrentTime();
 
   // REVISIT: maybe make ALL out_paths non-persisted to minimise flash writes??
@@ -705,7 +706,7 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;    // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base =   0.0f;  // turn off by default, was 10.0;
   _prefs.tx_delay_factor = 0.5f;   // was 0.25f
   _prefs.direct_tx_delay_factor = 0.2f; // was zero
@@ -791,7 +792,7 @@ void SensorMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet* pkt = createSelfAdvert();
   if (pkt) {
     if (flood) {
-      sendFlood(pkt, delay_millis);
+      sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
     } else {
       sendZeroHop(pkt, delay_millis);
     }
@@ -868,7 +869,8 @@ void SensorMesh::loop() {
 
   if (next_flood_advert && millisHasNowPassed(next_flood_advert)) {
     mesh::Packet* pkt = createSelfAdvert();
-    if (pkt) sendFlood(pkt);
+    unsigned long delay_millis = 0;
+    if (pkt) sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
 
     updateFloodAdvertTimer();   // schedule next flood advert
     updateAdvertTimer();   // also schedule local advert (so they don't overlap)

examples/simple_sensor/SensorMesh.h

@@ -33,11 +33,11 @@
 #define PERM_RECV_ALERTS_HI    (1 << 7)   // high priority alerts
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
+  #define FIRMWARE_BUILD_DATE   "6 Mar 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.12.0"
+  #define FIRMWARE_VERSION   "v1.14.0"
 #endif
 
 #define FIRMWARE_ROLE "sensor"
@@ -128,7 +128,7 @@ protected:
   void onControlDataRecv(mesh::Packet* packet) override;
   void onAckRecv(mesh::Packet* packet, uint32_t ack_crc) override;
   virtual bool handleIncomingMsg(ClientInfo& from, uint32_t timestamp, uint8_t* data, uint8_t flags, size_t len);
-  void sendAckTo(const ClientInfo& dest, uint32_t ack_hash);
+  void sendAckTo(const ClientInfo& dest, uint32_t ack_hash, uint8_t path_hash_size=1);
 private:
   FILESYSTEM* _fs;
   unsigned long next_local_advert, next_flood_advert;

mkdocs.yml

@@ -0,0 +1,19 @@
+site_name: MeshCore Docs
+site_url: https://meshcore-dev.github.io/meshcore/
+site_description: Documentation for the open source MeshCore firmware
+
+repo_name: meshcore-dev/meshcore
+repo_url: https://github.com/meshcore-dev/meshcore/
+edit_uri: edit/main/docs/
+
+theme:
+  name: material
+  logo: _assets/meshcore_tm.svg
+  features:
+    - content.action.edit
+    - content.code.copy
+    - search.highlight
+    - search.suggest
+
+extra_css:
+  - _stylesheets/extra.css

platformio.ini

@@ -24,9 +24,9 @@ lib_deps =
   melopero/Melopero RV3028 @ ^1.1.0
   electroniccats/CayenneLPP @ 1.6.1
 build_flags = -w -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-  -D LORA_FREQ=869.525
-  -D LORA_BW=250
-  -D LORA_SF=11
+  -D LORA_FREQ=869.618
+  -D LORA_BW=62.5
+  -D LORA_SF=8
   -D ENABLE_ADVERT_ON_BOOT=1
   -D ENABLE_PRIVATE_KEY_IMPORT=1   ; NOTE: comment these out for more secure firmware
   -D ENABLE_PRIVATE_KEY_EXPORT=1
@@ -59,6 +59,7 @@ platform = platformio/espressif32@6.11.0
 monitor_filters = esp32_exception_decoder
 extra_scripts = merge-bin.py
 build_flags = ${arduino_base.build_flags}
+  -D ESP32_PLATFORM
 ;  -D ESP32_CPU_FREQ=80          ; change it to your need
 build_src_filter = ${arduino_base.build_src_filter}
 

src/Dispatcher.cpp

@@ -8,7 +8,9 @@
 
 namespace mesh {
 
-#define MAX_RX_DELAY_MILLIS   32000  // 32 seconds
+#define MAX_RX_DELAY_MILLIS        32000  // 32 seconds
+#define MIN_TX_BUDGET_RESERVE_MS   100    // min budget (ms) required before allowing next TX
+#define MIN_TX_BUDGET_AIRTIME_DIV  2      // require at least 1/N of estimated airtime as budget before TX
 
 #ifndef NOISE_FLOOR_CALIB_INTERVAL
   #define NOISE_FLOOR_CALIB_INTERVAL   2000     // 2 seconds
@@ -20,12 +22,34 @@ void Dispatcher::begin() {
   _err_flags = 0;
   radio_nonrx_start = _ms->getMillis();
 
+  duty_cycle_window_ms = getDutyCycleWindowMs();
+  float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+  tx_budget_ms = (unsigned long)(duty_cycle_window_ms * duty_cycle);
+  last_budget_update = _ms->getMillis();
+
   _radio->begin();
   prev_isrecv_mode = _radio->isInRecvMode();
 }
 
 float Dispatcher::getAirtimeBudgetFactor() const {
-  return 2.0;   // default, 33.3%  (1/3rd)
+  return 1.0;
+}
+
+void Dispatcher::updateTxBudget() {
+  unsigned long now = _ms->getMillis();
+  unsigned long elapsed = now - last_budget_update;
+
+  float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+  unsigned long max_budget = (unsigned long)(getDutyCycleWindowMs() * duty_cycle);
+  unsigned long refill = (unsigned long)(elapsed * duty_cycle);
+  
+  if (refill > 0) {
+    tx_budget_ms += refill;
+    if (tx_budget_ms > max_budget) {
+      tx_budget_ms = max_budget;
+    }
+    last_budget_update = now;
+  }
 }
 
 int Dispatcher::calcRxDelay(float score, uint32_t air_time) const {
@@ -61,14 +85,27 @@ void Dispatcher::loop() {
   if (outbound) {  // waiting for outbound send to be completed
     if (_radio->isSendComplete()) {
       long t = _ms->getMillis() - outbound_start;
-      total_air_time += t;  // keep track of how much air time we are using
+      total_air_time += t;
       //Serial.print("  airtime="); Serial.println(t);
 
-      // will need radio silence up to next_tx_time
-      next_tx_time = futureMillis(t * getAirtimeBudgetFactor());
+      updateTxBudget();
+
+      if (t > tx_budget_ms) {
+        tx_budget_ms = 0;
+      } else {
+        tx_budget_ms -= t;
+      }
+
+      if (tx_budget_ms < MIN_TX_BUDGET_RESERVE_MS) {
+        float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+        unsigned long needed = MIN_TX_BUDGET_RESERVE_MS - tx_budget_ms;
+        next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
+      } else {
+        next_tx_time = _ms->getMillis();
+      }
 
       _radio->onSendFinished();
-      logTx(outbound, 2 + outbound->path_len + outbound->payload_len);
+      logTx(outbound, 2 + outbound->getPathByteLen() + outbound->payload_len);
       if (outbound->isRouteFlood()) {
         n_sent_flood++;
       } else {
@@ -80,7 +117,7 @@ void Dispatcher::loop() {
       MESH_DEBUG_PRINTLN("%s Dispatcher::loop(): WARNING: outbound packed send timed out!", getLogDateTime());
 
       _radio->onSendFinished();
-      logTxFail(outbound, 2 + outbound->path_len + outbound->payload_len);
+      logTxFail(outbound, 2 + outbound->getPathByteLen() + outbound->payload_len);
 
       releasePacket(outbound);  // return to pool
       outbound = NULL;
@@ -108,6 +145,48 @@ void Dispatcher::loop() {
   checkSend();
 }
 
+bool Dispatcher::tryParsePacket(Packet* pkt, const uint8_t* raw, int len) {
+  int i = 0;
+
+  pkt->header = raw[i++];
+  if (pkt->getPayloadVer() > PAYLOAD_VER_1) {
+    MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): unsupported packet version", getLogDateTime());
+    return false;
+  }
+
+  if (pkt->hasTransportCodes()) {
+    memcpy(&pkt->transport_codes[0], &raw[i], 2); i += 2;
+    memcpy(&pkt->transport_codes[1], &raw[i], 2); i += 2;
+  } else {
+    pkt->transport_codes[0] = pkt->transport_codes[1] = 0;
+  }
+
+  pkt->path_len = raw[i++];
+  uint8_t path_mode = pkt->path_len >> 6;  // upper 2 bits (legacy firmware: 00)
+  if (path_mode == 3) {   // Reserved for future
+    MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): unsupported path mode: 3", getLogDateTime());
+    return false;
+  }
+
+  uint8_t path_byte_len = (pkt->path_len & 63) * pkt->getPathHashSize();
+  if (path_byte_len > MAX_PATH_SIZE || i + path_byte_len > len) {
+    MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): partial or corrupt packet received, len=%d", getLogDateTime(), len);
+    return false;
+  }
+
+  memcpy(pkt->path, &raw[i], path_byte_len); i += path_byte_len;
+
+  pkt->payload_len = len - i;  // payload is remainder
+  if (pkt->payload_len > sizeof(pkt->payload)) {
+    MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): packet payload too big, payload_len=%d", getLogDateTime(), (uint32_t)pkt->payload_len);
+    return false;
+  }
+
+  memcpy(pkt->payload, &raw[i], pkt->payload_len);
+
+  return true;  // success
+}
+
 void Dispatcher::checkRecv() {
   Packet* pkt;
   float score;
@@ -122,45 +201,14 @@ void Dispatcher::checkRecv() {
       if (pkt == NULL) {
         MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): WARNING: received data, no unused packets available!", getLogDateTime());
       } else {
-        int i = 0;
-#ifdef NODE_ID
-        uint8_t sender_id = raw[i++];
-        if (sender_id == NODE_ID - 1 || sender_id == NODE_ID + 1) {  // simulate that NODE_ID can only hear NODE_ID-1 or NODE_ID+1, eg. 3 can't hear 1
+        if (tryParsePacket(pkt, raw, len)) {
+          pkt->_snr = _radio->getLastSNR() * 4.0f;
+          score = _radio->packetScore(_radio->getLastSNR(), len);
+          air_time = _radio->getEstAirtimeFor(len);
+          rx_air_time += air_time;
         } else {
-          _mgr->free(pkt);  // put back into pool
-          return;
-        }
-#endif
-
-        pkt->header = raw[i++];
-        if (pkt->hasTransportCodes()) {
-          memcpy(&pkt->transport_codes[0], &raw[i], 2); i += 2;
-          memcpy(&pkt->transport_codes[1], &raw[i], 2); i += 2;
-        } else {
-          pkt->transport_codes[0] = pkt->transport_codes[1] = 0;
-        }
-        pkt->path_len = raw[i++];
-
-        if (pkt->path_len > MAX_PATH_SIZE || i + pkt->path_len > len) {
-          MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): partial or corrupt packet received, len=%d", getLogDateTime(), len);
           _mgr->free(pkt);  // put back into pool
           pkt = NULL;
-        } else {
-          memcpy(pkt->path, &raw[i], pkt->path_len); i += pkt->path_len;
-
-          pkt->payload_len = len - i;  // payload is remainder
-          if (pkt->payload_len > sizeof(pkt->payload)) {
-            MESH_DEBUG_PRINTLN("%s Dispatcher::checkRecv(): packet payload too big, payload_len=%d", getLogDateTime(), (uint32_t)pkt->payload_len);
-            _mgr->free(pkt);  // put back into pool
-            pkt = NULL;  
-          } else {
-            memcpy(pkt->payload, &raw[i], pkt->payload_len);
-
-            pkt->_snr = _radio->getLastSNR() * 4.0f;
-            score = _radio->packetScore(_radio->getLastSNR(), len);
-            air_time = _radio->getEstAirtimeFor(len);
-            rx_air_time += air_time;
-          }
         }
       }
     } else {
@@ -224,9 +272,20 @@ void Dispatcher::processRecvPacket(Packet* pkt) {
 }
 
 void Dispatcher::checkSend() {
-  if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return;  // nothing waiting to send
-  if (!millisHasNowPassed(next_tx_time)) return;   // still in 'radio silence' phase (from airtime budget setting)
-  if (_radio->isReceiving()) {   // LBT - check if radio is currently mid-receive, or if channel activity
+  if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return;
+  
+  updateTxBudget();
+  
+  uint32_t est_airtime = _radio->getEstAirtimeFor(MAX_TRANS_UNIT);
+  if (tx_budget_ms < est_airtime / MIN_TX_BUDGET_AIRTIME_DIV) {
+    float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+    unsigned long needed = est_airtime / MIN_TX_BUDGET_AIRTIME_DIV - tx_budget_ms;
+    next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
+    return;
+  }
+  
+  if (!millisHasNowPassed(next_tx_time)) return;
+  if (_radio->isReceiving()) {
     if (cad_busy_start == 0) {
       cad_busy_start = _ms->getMillis();   // record when CAD busy state started
     }
@@ -249,16 +308,13 @@ void Dispatcher::checkSend() {
     int len = 0;
     uint8_t raw[MAX_TRANS_UNIT];
 
-#ifdef NODE_ID
-    raw[len++] = NODE_ID;
-#endif
     raw[len++] = outbound->header;
     if (outbound->hasTransportCodes()) {
       memcpy(&raw[len], &outbound->transport_codes[0], 2); len += 2;
       memcpy(&raw[len], &outbound->transport_codes[1], 2); len += 2;
     }
     raw[len++] = outbound->path_len;
-    memcpy(&raw[len], outbound->path, outbound->path_len); len += outbound->path_len;
+    len += Packet::writePath(&raw[len], outbound->path, outbound->path_len);
 
     if (len + outbound->payload_len > MAX_TRANS_UNIT) {
       MESH_DEBUG_PRINTLN("%s Dispatcher::checkSend(): FATAL: Invalid packet queued... too long, len=%d", getLogDateTime(), len + outbound->payload_len);
@@ -312,7 +368,7 @@ void Dispatcher::releasePacket(Packet* packet) {
 }
 
 void Dispatcher::sendPacket(Packet* packet, uint8_t priority, uint32_t delay_millis) {
-  if (packet->path_len > MAX_PATH_SIZE || packet->payload_len > MAX_PACKET_PAYLOAD) {
+  if (!Packet::isValidPathLen(packet->path_len) || packet->payload_len > MAX_PACKET_PAYLOAD) {
     MESH_DEBUG_PRINTLN("%s Dispatcher::sendPacket(): ERROR: invalid packet... path_len=%d, payload_len=%d", getLogDateTime(), (uint32_t) packet->path_len, (uint32_t) packet->payload_len);
     _mgr->free(packet);
   } else {

src/Dispatcher.h

@@ -122,8 +122,12 @@ class Dispatcher {
   bool  prev_isrecv_mode;
   uint32_t n_sent_flood, n_sent_direct;
   uint32_t n_recv_flood, n_recv_direct;
+  unsigned long tx_budget_ms;
+  unsigned long last_budget_update;
+  unsigned long duty_cycle_window_ms;
 
   void processRecvPacket(Packet* pkt);
+  void updateTxBudget();
 
 protected:
   PacketManager* _mgr;
@@ -142,6 +146,9 @@ protected:
     _err_flags = 0;
     radio_nonrx_start = 0;
     prev_isrecv_mode = true;
+    tx_budget_ms = 0;
+    last_budget_update = 0;
+    duty_cycle_window_ms = 3600000;
   }
 
   virtual DispatcherAction onRecvPacket(Packet* pkt) = 0;
@@ -159,6 +166,7 @@ protected:
   virtual uint32_t getCADFailMaxDuration() const;
   virtual int getInterferenceThreshold() const { return 0; }    // disabled by default
   virtual int getAGCResetInterval() const { return 0; }    // disabled by default
+  virtual unsigned long getDutyCycleWindowMs() const { return 3600000; }
 
 public:
   void begin();
@@ -168,8 +176,9 @@ public:
   void releasePacket(Packet* packet);
   void sendPacket(Packet* packet, uint8_t priority, uint32_t delay_millis=0);
 
-  unsigned long getTotalAirTime() const { return total_air_time; }  // in milliseconds
+  unsigned long getTotalAirTime() const { return total_air_time; }
   unsigned long getReceiveAirTime() const {return rx_air_time; }
+  unsigned long getRemainingTxBudget() const { return tx_budget_ms; }
   uint32_t getNumSentFlood() const { return n_sent_flood; }
   uint32_t getNumSentDirect() const { return n_sent_direct; }
   uint32_t getNumRecvFlood() const { return n_recv_flood; }
@@ -184,6 +193,7 @@ public:
   unsigned long futureMillis(int millis_from_now) const;
 
 private:
+  bool tryParsePacket(Packet* pkt, const uint8_t* raw, int len);
   void checkRecv();
   void checkSend();
 };

src/Identity.h

@@ -20,6 +20,10 @@ public:
     memcpy(dest, pub_key, PATH_HASH_SIZE);    // hash is just prefix of pub_key
     return PATH_HASH_SIZE;
   }
+  int copyHashTo(uint8_t* dest, uint8_t len) const { 
+    memcpy(dest, pub_key, len);    // hash is just prefix of pub_key
+    return len;
+  }
   bool isHashMatch(const uint8_t* hash) const {
     return memcmp(hash, pub_key, PATH_HASH_SIZE) == 0;
   }

src/Mesh.cpp

@@ -39,11 +39,6 @@ int Mesh::searchChannelsByHash(const uint8_t* hash, GroupChannel channels[], int
 }
 
 DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
-  if (pkt->getPayloadVer() > PAYLOAD_VER_1) {  // not supported in this firmware version
-    MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): unsupported packet version", getLogDateTime());
-    return ACTION_RELEASE;
-  }
-
   if (pkt->isRouteDirect() && pkt->getPayloadType() == PAYLOAD_TYPE_TRACE) {
     if (pkt->path_len < MAX_PATH_SIZE) {
       uint8_t i = 0;
@@ -70,14 +65,14 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
   }
 
   if (pkt->isRouteDirect() && pkt->getPayloadType() == PAYLOAD_TYPE_CONTROL && (pkt->payload[0] & 0x80) != 0) {
-    if (pkt->path_len == 0) {
+    if (pkt->getPathHashCount() == 0) {
       onControlDataRecv(pkt);
     }
     // just zero-hop control packets allowed (for this subset of payloads)
     return ACTION_RELEASE;
   }
 
-  if (pkt->isRouteDirect() && pkt->path_len >= PATH_HASH_SIZE) {
+  if (pkt->isRouteDirect() && pkt->getPathHashCount() > 0) {
     // check for 'early received' ACK
     if (pkt->getPayloadType() == PAYLOAD_TYPE_ACK) {
       int i = 0;
@@ -88,7 +83,7 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
       }
     }
 
-    if (self_id.isHashMatch(pkt->path) && allowPacketForward(pkt)) {
+    if (self_id.isHashMatch(pkt->path, pkt->getPathHashSize()) && allowPacketForward(pkt)) {
       if (pkt->getPayloadType() == PAYLOAD_TYPE_MULTIPART) {
         return forwardMultipartDirect(pkt);
       } else if (pkt->getPayloadType() == PAYLOAD_TYPE_ACK) {
@@ -158,7 +153,9 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
               if (pkt->getPayloadType() == PAYLOAD_TYPE_PATH) {
                 int k = 0;
                 uint8_t path_len = data[k++];
-                uint8_t* path = &data[k]; k += path_len;
+                uint8_t hash_size = (path_len >> 6) + 1;
+                uint8_t hash_count = path_len & 63;
+                uint8_t* path = &data[k]; k += hash_size*hash_count;
                 uint8_t extra_type = data[k++] & 0x0F;   // upper 4 bits reserved for future use
                 uint8_t* extra = &data[k];
                 uint8_t extra_len = len - k;   // remainder of packet (may be padded with zeroes!)
@@ -293,8 +290,7 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
         if (type == PAYLOAD_TYPE_ACK && pkt->payload_len >= 5) {    // a multipart ACK
           Packet tmp;
           tmp.header = pkt->header;
-          tmp.path_len = pkt->path_len;
-          memcpy(tmp.path, pkt->path, pkt->path_len);
+          tmp.path_len = Packet::copyPath(tmp.path, pkt->path, pkt->path_len);
           tmp.payload_len = pkt->payload_len - 1;
           memcpy(tmp.payload, &pkt->payload[1], tmp.payload_len);
 
@@ -321,27 +317,25 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
 
 void Mesh::removeSelfFromPath(Packet* pkt) {
   // remove our hash from 'path'
-  pkt->path_len -= PATH_HASH_SIZE;
-#if 0
-  memcpy(pkt->path, &pkt->path[PATH_HASH_SIZE], pkt->path_len);
-#elif PATH_HASH_SIZE == 1
-  for (int k = 0; k < pkt->path_len; k++) {  // shuffle bytes by 1
-    pkt->path[k] = pkt->path[k + 1];
+  pkt->setPathHashCount(pkt->getPathHashCount() - 1);  // decrement the count
+
+  uint8_t sz = pkt->getPathHashSize();
+  for (int k = 0; k < pkt->getPathHashCount()*sz; k += sz) {  // shuffle path by 1 'entry'
+    memcpy(&pkt->path[k], &pkt->path[k + sz], sz);
   }
-#else
-  #error "need path remove impl"
-#endif
 }
 
 DispatcherAction Mesh::routeRecvPacket(Packet* packet) {
+  uint8_t n = packet->getPathHashCount();
   if (packet->isRouteFlood() && !packet->isMarkedDoNotRetransmit()
-    && packet->path_len + PATH_HASH_SIZE <= MAX_PATH_SIZE && allowPacketForward(packet)) {
+    && (n + 1)*packet->getPathHashSize() <= MAX_PATH_SIZE && allowPacketForward(packet)) {
     // append this node's hash to 'path'
-    packet->path_len += self_id.copyHashTo(&packet->path[packet->path_len]);
+    self_id.copyHashTo(&packet->path[n * packet->getPathHashSize()], packet->getPathHashSize());
+    packet->setPathHashCount(n + 1);
 
     uint32_t d = getRetransmitDelay(packet);
     // as this propagates outwards, give it lower and lower priority
-    return ACTION_RETRANSMIT_DELAYED(packet->path_len, d);   // give priority to closer sources, than ones further away
+    return ACTION_RETRANSMIT_DELAYED(packet->getPathHashCount(), d);   // give priority to closer sources, than ones further away
   }
   return ACTION_RELEASE;
 }
@@ -353,8 +347,7 @@ DispatcherAction Mesh::forwardMultipartDirect(Packet* pkt) {
   if (type == PAYLOAD_TYPE_ACK && pkt->payload_len >= 5) {    // a multipart ACK
     Packet tmp;
     tmp.header = pkt->header;
-    tmp.path_len = pkt->path_len;
-    memcpy(tmp.path, pkt->path, pkt->path_len);
+    tmp.path_len = Packet::copyPath(tmp.path, pkt->path, pkt->path_len);
     tmp.payload_len = pkt->payload_len - 1;
     memcpy(tmp.payload, &pkt->payload[1], tmp.payload_len);
 
@@ -376,7 +369,7 @@ void Mesh::routeDirectRecvAcks(Packet* packet, uint32_t delay_millis) {
       delay_millis += getDirectRetransmitDelay(packet) + 300;
       auto a1 = createMultiAck(crc, extra);
       if (a1) {
-        memcpy(a1->path, packet->path, a1->path_len = packet->path_len);
+        a1->path_len = Packet::copyPath(a1->path, packet->path, packet->path_len);
         a1->header &= ~PH_ROUTE_MASK;
         a1->header |= ROUTE_TYPE_DIRECT;
         sendPacket(a1, 0, delay_millis);
@@ -386,7 +379,7 @@ void Mesh::routeDirectRecvAcks(Packet* packet, uint32_t delay_millis) {
 
     auto a2 = createAck(crc);
     if (a2) {
-      memcpy(a2->path, packet->path, a2->path_len = packet->path_len);
+      a2->path_len = Packet::copyPath(a2->path, packet->path, packet->path_len);
       a2->header &= ~PH_ROUTE_MASK;
       a2->header |= ROUTE_TYPE_DIRECT;
       sendPacket(a2, 0, delay_millis);
@@ -439,7 +432,10 @@ Packet* Mesh::createPathReturn(const Identity& dest, const uint8_t* secret, cons
 }
 
 Packet* Mesh::createPathReturn(const uint8_t* dest_hash, const uint8_t* secret, const uint8_t* path, uint8_t path_len, uint8_t extra_type, const uint8_t*extra, size_t extra_len) {
-  if (path_len + extra_len + 5 > MAX_COMBINED_PATH) return NULL;  // too long!!
+  uint8_t path_hash_size = (path_len >> 6) + 1;
+  uint8_t path_hash_count = path_len & 63;
+
+  if (path_hash_count*path_hash_size + extra_len + 5 > MAX_COMBINED_PATH) return NULL;  // too long!!
 
   Packet* packet = obtainNewPacket();
   if (packet == NULL) {
@@ -457,7 +453,7 @@ Packet* Mesh::createPathReturn(const uint8_t* dest_hash, const uint8_t* secret,
     uint8_t data[MAX_PACKET_PAYLOAD];
 
     data[data_len++] = path_len;
-    memcpy(&data[data_len], path, path_len); data_len += path_len;
+    memcpy(&data[data_len], path, path_hash_count*path_hash_size); data_len += path_hash_count*path_hash_size;
     if (extra_len > 0) {
       data[data_len++] = extra_type;
       memcpy(&data[data_len], extra, extra_len); data_len += extra_len;
@@ -624,15 +620,19 @@ Packet* Mesh::createControlData(const uint8_t* data, size_t len) {
   return packet;
 }
 
-void Mesh::sendFlood(Packet* packet, uint32_t delay_millis) {
+void Mesh::sendFlood(Packet* packet, uint32_t delay_millis, uint8_t path_hash_size) {
   if (packet->getPayloadType() == PAYLOAD_TYPE_TRACE) {
     MESH_DEBUG_PRINTLN("%s Mesh::sendFlood(): TRACE type not suspported", getLogDateTime());
     return;
   }
+  if (path_hash_size == 0 || path_hash_size > 3) {
+    MESH_DEBUG_PRINTLN("%s Mesh::sendFlood(): invalid path_hash_size", getLogDateTime());
+    return;
+  }
 
   packet->header &= ~PH_ROUTE_MASK;
   packet->header |= ROUTE_TYPE_FLOOD;
-  packet->path_len = 0;
+  packet->setPathHashSizeAndCount(path_hash_size, 0);
 
   _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
 
@@ -647,17 +647,21 @@ void Mesh::sendFlood(Packet* packet, uint32_t delay_millis) {
   sendPacket(packet, pri, delay_millis);
 }
 
-void Mesh::sendFlood(Packet* packet, uint16_t* transport_codes, uint32_t delay_millis) {
+void Mesh::sendFlood(Packet* packet, uint16_t* transport_codes, uint32_t delay_millis, uint8_t path_hash_size) {
   if (packet->getPayloadType() == PAYLOAD_TYPE_TRACE) {
     MESH_DEBUG_PRINTLN("%s Mesh::sendFlood(): TRACE type not suspported", getLogDateTime());
     return;
   }
+  if (path_hash_size == 0 || path_hash_size > 3) {
+    MESH_DEBUG_PRINTLN("%s Mesh::sendFlood(): invalid path_hash_size", getLogDateTime());
+    return;
+  }
 
   packet->header &= ~PH_ROUTE_MASK;
   packet->header |= ROUTE_TYPE_TRANSPORT_FLOOD;
   packet->transport_codes[0] = transport_codes[0];
   packet->transport_codes[1] = transport_codes[1];
-  packet->path_len = 0;
+  packet->setPathHashSizeAndCount(path_hash_size, 0);
 
   _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
 
@@ -679,13 +683,13 @@ void Mesh::sendDirect(Packet* packet, const uint8_t* path, uint8_t path_len, uin
   uint8_t pri;
   if (packet->getPayloadType() == PAYLOAD_TYPE_TRACE) {   // TRACE packets are different
     // for TRACE packets, path is appended to end of PAYLOAD. (path is used for SNR's)
-    memcpy(&packet->payload[packet->payload_len], path, path_len);
+    memcpy(&packet->payload[packet->payload_len], path, path_len);  // NOTE: path_len here can be > 64, and NOT in the new scheme
     packet->payload_len += path_len;
 
     packet->path_len = 0;
     pri = 5;   // maybe make this configurable
   } else {
-    memcpy(packet->path, path, packet->path_len = path_len);
+    packet->path_len = Packet::copyPath(packet->path, path, path_len);
     if (packet->getPayloadType() == PAYLOAD_TYPE_PATH) {
       pri = 1;   // slightly less priority
     } else {

src/Mesh.h

@@ -196,13 +196,13 @@ public:
   /**
    * \brief  send a locally-generated Packet with flood routing
   */
-  void sendFlood(Packet* packet, uint32_t delay_millis=0);
+  void sendFlood(Packet* packet, uint32_t delay_millis=0, uint8_t path_hash_size=1);
 
   /**
    * \brief  send a locally-generated Packet with flood routing
    * \param transport_codes   array of 2 codes to attach to packet
   */
-  void sendFlood(Packet* packet, uint16_t* transport_codes, uint32_t delay_millis=0);
+  void sendFlood(Packet* packet, uint16_t* transport_codes, uint32_t delay_millis=0, uint8_t path_hash_size=1);
 
   /**
    * \brief  send a locally-generated Packet with Direct routing

src/MeshCore.h

@@ -55,6 +55,7 @@ public:
   virtual uint32_t getGpio() { return 0; }
   virtual void setGpio(uint32_t values) {}
   virtual uint8_t getStartupReason() const = 0;
+  virtual bool getBootloaderVersion(char* version, size_t max_len) { return false; }
   virtual bool startOTAUpdate(const char* id, char reply[]) { return false; }   // not supported
 
   // Power management interface (boards with power management override these)

src/Packet.cpp

@@ -10,8 +10,32 @@ Packet::Packet() {
   payload_len = 0;
 }
 
+bool Packet::isValidPathLen(uint8_t path_len) {
+  uint8_t hash_count = path_len & 63;
+  uint8_t hash_size = (path_len >> 6) + 1;
+  if (hash_size == 4) return false;  // Reserved for future
+  return hash_count*hash_size <= MAX_PATH_SIZE;
+}
+
+size_t Packet::writePath(uint8_t* dest, const uint8_t* src, uint8_t path_len) {
+  uint8_t hash_count = path_len & 63;
+  uint8_t hash_size = (path_len >> 6) + 1;
+  size_t len = hash_count*hash_size;
+  if (len > MAX_PATH_SIZE) {
+    MESH_DEBUG_PRINTLN("Packet::copyPath, invalid path_len=%d", (uint32_t)path_len);
+    return 0;   // Error
+  }
+  memcpy(dest, src, len);
+  return len;
+}
+
+uint8_t Packet::copyPath(uint8_t* dest, const uint8_t* src, uint8_t path_len) {
+  writePath(dest, src, path_len);
+  return path_len;
+}
+
 int Packet::getRawLength() const {
-  return 2 + path_len + payload_len + (hasTransportCodes() ? 4 : 0);
+  return 2 + getPathByteLen() + payload_len + (hasTransportCodes() ? 4 : 0);
 }
 
 void Packet::calculatePacketHash(uint8_t* hash) const {
@@ -33,7 +57,7 @@ uint8_t Packet::writeTo(uint8_t dest[]) const {
     memcpy(&dest[i], &transport_codes[1], 2); i += 2;
   }
   dest[i++] = path_len;
-  memcpy(&dest[i], path, path_len); i += path_len;
+  i += writePath(&dest[i], path, path_len);
   memcpy(&dest[i], payload, payload_len); i += payload_len;
   return i;
 }
@@ -48,8 +72,11 @@ bool Packet::readFrom(const uint8_t src[], uint8_t len) {
     transport_codes[0] = transport_codes[1] = 0;
   }
   path_len = src[i++];
-  if (path_len > sizeof(path)) return false;   // bad encoding
-  memcpy(path, &src[i], path_len); i += path_len;
+  if (!isValidPathLen(path_len)) return false;   // bad encoding
+
+  uint8_t bl = getPathByteLen();
+  memcpy(path, &src[i], bl); i += bl;
+
   if (i >= len) return false;   // bad encoding
   payload_len = len - i;
   if (payload_len > sizeof(payload)) return false;  // bad encoding

src/Packet.h

@@ -76,6 +76,16 @@ public:
    */
   uint8_t getPayloadVer() const { return (header >> PH_VER_SHIFT) & PH_VER_MASK; }
 
+  uint8_t getPathHashSize() const { return (path_len >> 6) + 1; }
+  uint8_t getPathHashCount() const { return path_len & 63; }
+  uint8_t getPathByteLen() const { return getPathHashCount() * getPathHashSize(); }
+  void setPathHashCount(uint8_t n) { path_len &= ~63; path_len |= n; }
+  void setPathHashSizeAndCount(uint8_t sz, uint8_t n) { path_len = ((sz - 1) << 6) | (n & 63); }
+
+  static uint8_t copyPath(uint8_t* dest, const uint8_t* src, uint8_t path_len);  // returns path_len
+  static size_t writePath(uint8_t* dest, const uint8_t* src, uint8_t path_len);  // returns byte length written
+  static bool isValidPathLen(uint8_t path_len);
+
   void markDoNotRetransmit() { header = 0xFF; }
   bool isMarkedDoNotRetransmit() const { return header == 0xFF; }
 

src/helpers/BaseChatMesh.cpp

@@ -39,7 +39,7 @@ mesh::Packet* BaseChatMesh::createSelfAdvert(const char* name, double lat, doubl
 }
 
 void BaseChatMesh::sendAckTo(const ContactInfo& dest, uint32_t ack_hash) {
-  if (dest.out_path_len < 0) {
+  if (dest.out_path_len == OUT_PATH_UNKNOWN) {
     mesh::Packet* ack = createAck(ack_hash);
     if (ack) sendFloodScoped(dest, ack, TXT_ACK_DELAY);
   } else {
@@ -92,7 +92,7 @@ ContactInfo* BaseChatMesh::allocateContactSlot() {
 void BaseChatMesh::populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp) {
   memset(&ci, 0, sizeof(ci));
   ci.id = id;
-  ci.out_path_len = -1;  // initially out_path is unknown
+  ci.out_path_len = OUT_PATH_UNKNOWN;
   StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
   ci.type = parser.getType();
   if (parser.hasLatLon()) {
@@ -141,6 +141,15 @@ void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id,
       return;
     }
 
+    // check hop limit for new contacts (0 = no limit, 1 = direct (0 hops), N = up to N-1 hops)
+    uint8_t max_hops = getAutoAddMaxHops();
+    if (max_hops > 0 && packet->getPathHashCount() >= max_hops) {
+      ContactInfo ci;
+      populateContactFromAdvert(ci, id, parser, timestamp);
+      onDiscoveredContact(ci, true, packet->path_len, packet->path);       // let UI know
+      return;
+    }
+
     from = allocateContactSlot();
     if (from == NULL) {
       ContactInfo ci;
@@ -263,7 +272,7 @@ void BaseChatMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender
       } else {
         mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, from.id, secret, temp_buf, reply_len);
         if (reply) {
-          if (from.out_path_len >= 0) {  // we have an out_path, so send DIRECT
+          if (from.out_path_len != OUT_PATH_UNKNOWN) {  // we have an out_path, so send DIRECT
             sendDirect(reply, from.out_path, from.out_path_len, SERVER_RESPONSE_DELAY);
           } else {
             sendFloodScoped(from, reply, SERVER_RESPONSE_DELAY);
@@ -273,7 +282,7 @@ void BaseChatMesh::onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender
     }
   } else if (type == PAYLOAD_TYPE_RESPONSE && len > 0) {
     onContactResponse(from, data, len);
-    if (packet->isRouteFlood() && from.out_path_len >= 0) {
+    if (packet->isRouteFlood() && from.out_path_len != OUT_PATH_UNKNOWN) {
       // we have direct path, but other node is still sending flood response, so maybe they didn't receive reciprocal path properly(?)
       handleReturnPathRetry(from, packet->path, packet->path_len);
     }
@@ -295,7 +304,7 @@ bool BaseChatMesh::onPeerPathRecv(mesh::Packet* packet, int sender_idx, const ui
 bool BaseChatMesh::onContactPathRecv(ContactInfo& from, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) {
   // NOTE: default impl, we just replace the current 'out_path' regardless, whenever sender sends us a new out_path.
   // FUTURE: could store multiple out_paths per contact, and try to find which is the 'best'(?)
-  memcpy(from.out_path, out_path, from.out_path_len = out_path_len);  // store a copy of path, for sendDirect()
+  from.out_path_len = mesh::Packet::copyPath(from.out_path, out_path, out_path_len);  // store a copy of path, for sendDirect()
   from.lastmod = getRTCClock()->getCurrentTime();
 
   onContactPathUpdated(from);
@@ -317,7 +326,7 @@ void BaseChatMesh::onAckRecv(mesh::Packet* packet, uint32_t ack_crc) {
     txt_send_timeout = 0;   // matched one we're waiting for, cancel timeout timer
     packet->markDoNotRetransmit();   // ACK was for this node, so don't retransmit
 
-    if (packet->isRouteFlood() && from->out_path_len >= 0) {
+    if (packet->isRouteFlood() && from->out_path_len != OUT_PATH_UNKNOWN) {
       // we have direct path, but other node is still sending flood, so maybe they didn't receive reciprocal path properly(?)
       handleReturnPathRetry(*from, packet->path, packet->path_len);
     }
@@ -386,7 +395,7 @@ int  BaseChatMesh::sendMessage(const ContactInfo& recipient, uint32_t timestamp,
   uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
 
   int rc;
-  if (recipient.out_path_len < 0) {
+  if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
     sendFloodScoped(recipient, pkt);
     txt_send_timeout = futureMillis(est_timeout = calcFloodTimeoutMillisFor(t));
     rc = MSG_SEND_SENT_FLOOD;
@@ -412,7 +421,7 @@ int  BaseChatMesh::sendCommandData(const ContactInfo& recipient, uint32_t timest
 
   uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
   int rc;
-  if (recipient.out_path_len < 0) {
+  if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
     sendFloodScoped(recipient, pkt);
     txt_send_timeout = futureMillis(est_timeout = calcFloodTimeoutMillisFor(t));
     rc = MSG_SEND_SENT_FLOOD;
@@ -500,7 +509,7 @@ int BaseChatMesh::sendLogin(const ContactInfo& recipient, const char* password,
   }
   if (pkt) {
     uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
-    if (recipient.out_path_len < 0) {
+    if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
       sendFloodScoped(recipient, pkt);
       est_timeout = calcFloodTimeoutMillisFor(t);
       return MSG_SEND_SENT_FLOOD;
@@ -525,7 +534,7 @@ int BaseChatMesh::sendAnonReq(const ContactInfo& recipient, const uint8_t* data,
   }
   if (pkt) {
     uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
-    if (recipient.out_path_len < 0) {
+    if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
       sendFloodScoped(recipient, pkt);
       est_timeout = calcFloodTimeoutMillisFor(t);
       return MSG_SEND_SENT_FLOOD;
@@ -552,7 +561,7 @@ int  BaseChatMesh::sendRequest(const ContactInfo& recipient, const uint8_t* req_
   }
   if (pkt) {
     uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
-    if (recipient.out_path_len < 0) {
+    if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
       sendFloodScoped(recipient, pkt);
       est_timeout = calcFloodTimeoutMillisFor(t);
       return MSG_SEND_SENT_FLOOD;
@@ -579,7 +588,7 @@ int  BaseChatMesh::sendRequest(const ContactInfo& recipient, uint8_t req_type, u
   }
   if (pkt) {
     uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
-    if (recipient.out_path_len < 0) {
+    if (recipient.out_path_len == OUT_PATH_UNKNOWN) {
       sendFloodScoped(recipient, pkt);
       est_timeout = calcFloodTimeoutMillisFor(t);
       return MSG_SEND_SENT_FLOOD;
@@ -683,7 +692,7 @@ void BaseChatMesh::checkConnections() {
         MESH_DEBUG_PRINTLN("checkConnections(): Keep_alive contact not found!");
         continue;
       }
-      if (contact->out_path_len < 0) {
+      if (contact->out_path_len == OUT_PATH_UNKNOWN) {
         MESH_DEBUG_PRINTLN("checkConnections(): Keep_alive contact, no out_path!");
         continue;
       }
@@ -710,7 +719,7 @@ void BaseChatMesh::checkConnections() {
 }
 
 void BaseChatMesh::resetPathTo(ContactInfo& recipient) {
-  recipient.out_path_len = -1;
+  recipient.out_path_len = OUT_PATH_UNKNOWN;
 }
 
 static ContactInfo* table;  // pass via global :-(

src/helpers/BaseChatMesh.h

@@ -98,6 +98,7 @@ protected:
   virtual bool shouldAutoAddContactType(uint8_t type) const { return true; }
   virtual void onContactsFull() {};
   virtual bool shouldOverwriteWhenFull() const { return false; }
+  virtual uint8_t getAutoAddMaxHops() const { return 0; }  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops
   virtual void onContactOverwrite(const uint8_t* pub_key) {};
   virtual void onDiscoveredContact(ContactInfo& contact, bool is_new, uint8_t path_len, const uint8_t* path) = 0;
   virtual ContactInfo* processAck(const uint8_t *data) = 0;

src/helpers/ClientACL.cpp

@@ -114,7 +114,7 @@ ClientInfo* ClientACL::putClient(const mesh::Identity& id, uint8_t init_perms) {
   memset(c, 0, sizeof(*c));
   c->permissions = init_perms;
   c->id = id;
-  c->out_path_len = -1;  // initially out_path is unknown
+  c->out_path_len = OUT_PATH_UNKNOWN;
   return c;
 }
 

src/helpers/ClientACL.h

@@ -10,10 +10,12 @@
 #define PERM_ACL_READ_WRITE    2
 #define PERM_ACL_ADMIN         3
 
+#define OUT_PATH_UNKNOWN  0xFF
+
 struct ClientInfo {
   mesh::Identity id;
   uint8_t permissions;
-  int8_t out_path_len;
+  uint8_t out_path_len;
   uint8_t out_path[MAX_PATH_SIZE];
   uint8_t shared_secret[PUB_KEY_SIZE];
   uint32_t last_timestamp;   // by THEIR clock  (transient)

src/helpers/CommonCLI.cpp

@@ -63,7 +63,9 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->multi_acks, sizeof(_prefs->multi_acks));                         // 115
     file.read((uint8_t *)&_prefs->bw, sizeof(_prefs->bw));                                         // 116
     file.read((uint8_t *)&_prefs->agc_reset_interval, sizeof(_prefs->agc_reset_interval));         // 120
-    file.read(pad, 3);                                                                             // 121
+    file.read((uint8_t *)&_prefs->path_hash_mode, sizeof(_prefs->path_hash_mode));                 // 121
+    file.read((uint8_t *)&_prefs->loop_detect, sizeof(_prefs->loop_detect));                       // 122
+    file.read(pad, 1);                                                                             // 123
     file.read((uint8_t *)&_prefs->flood_max, sizeof(_prefs->flood_max));                           // 124
     file.read((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.read((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
@@ -81,7 +83,9 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier)); // 166
     file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.read((uint8_t *)&_prefs->flood_advert_base, sizeof(_prefs->flood_advert_base));                 // 290
+
+    // 294
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -95,6 +99,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->tx_power_dbm = constrain(_prefs->tx_power_dbm, -9, 30);
     _prefs->multi_acks = constrain(_prefs->multi_acks, 0, 1);
     _prefs->adc_multiplier = constrain(_prefs->adc_multiplier, 0.0f, 10.0f);
+    _prefs->path_hash_mode = constrain(_prefs->path_hash_mode, 0, 2);   // NOTE: mode 3 reserved for future
 
     // sanitise bad bridge pref values
     _prefs->bridge_enabled = constrain(_prefs->bridge_enabled, 0, 1);
@@ -108,6 +113,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->gps_enabled = constrain(_prefs->gps_enabled, 0, 1);
     _prefs->advert_loc_policy = constrain(_prefs->advert_loc_policy, 0, 2);
 
+    _prefs->flood_advert_base = constrain(_prefs->flood_advert_base, 0, 1);
+
     file.close();
   }
 }
@@ -147,7 +154,9 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->multi_acks, sizeof(_prefs->multi_acks));                         // 115
     file.write((uint8_t *)&_prefs->bw, sizeof(_prefs->bw));                                         // 116
     file.write((uint8_t *)&_prefs->agc_reset_interval, sizeof(_prefs->agc_reset_interval));         // 120
-    file.write(pad, 3);                                                                             // 121
+    file.write((uint8_t *)&_prefs->path_hash_mode, sizeof(_prefs->path_hash_mode));                 // 121
+    file.write((uint8_t *)&_prefs->loop_detect, sizeof(_prefs->loop_detect));                       // 122
+    file.write(pad, 1);                                                                             // 123
     file.write((uint8_t *)&_prefs->flood_max, sizeof(_prefs->flood_max));                           // 124
     file.write((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.write((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
@@ -165,7 +174,9 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.write((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
     file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.write((uint8_t *)&_prefs->flood_advert_base, sizeof(_prefs->flood_advert_base));                 // 290
+
+    // 294
 
     file.close();
   }
@@ -200,6 +211,10 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       // Reset clock
       getRTCClock()->setCurrentTime(1715770351);  // 15 May 2024, 8:50pm
       _board->reboot();  // doesn't return
+     } else if (memcmp(command, "advert.zerohop", 14) == 0 && (command[14] == 0 || command[14] == ' ')) {
+      // send zerohop advert
+      _callbacks->sendSelfAdvertisement(1500, false);  // longer delay, give CLI response time to be sent first
+      strcpy(reply, "OK - zerohop advert sent");
     } else if (memcmp(command, "advert", 6) == 0) {
       // send flood advert
       _callbacks->sendSelfAdvertisement(1500, true);  // longer delay, give CLI response time to be sent first
@@ -325,6 +340,18 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
           sp++;
         }
         *reply = 0;  // set null terminator
+      } else if (memcmp(config, "path.hash.mode", 14) == 0) {
+        sprintf(reply, "> %d", (uint32_t)_prefs->path_hash_mode);
+      } else if (memcmp(config, "loop.detect", 11) == 0) {
+        if (_prefs->loop_detect == LOOP_DETECT_OFF) {
+          strcpy(reply, "> off");
+        } else if (_prefs->loop_detect == LOOP_DETECT_MINIMAL) {
+          strcpy(reply, "> minimal");
+        } else if (_prefs->loop_detect == LOOP_DETECT_MODERATE) {
+          strcpy(reply, "> moderate");
+        } else {
+          strcpy(reply, "> strict");
+        }
       } else if (memcmp(config, "tx", 2) == 0 && (config[2] == 0 || config[2] == ' ')) {
         sprintf(reply, "> %d", (int32_t) _prefs->tx_power_dbm);
       } else if (memcmp(config, "freq", 4) == 0) {
@@ -362,6 +389,17 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       } else if (memcmp(config, "bridge.secret", 13) == 0) {
         sprintf(reply, "> %s", _prefs->bridge_secret);
 #endif
+      } else if (memcmp(config, "bootloader.ver", 14) == 0) {
+      #ifdef NRF52_PLATFORM
+          char ver[32];
+          if (_board->getBootloaderVersion(ver, sizeof(ver))) {
+              sprintf(reply, "> %s", ver);
+          } else {
+              strcpy(reply, "> unknown");
+          }
+      #else
+          strcpy(reply, "ERROR: unsupported");
+      #endif
       } else if (memcmp(config, "adc.multiplier", 14) == 0) {
         float adc_mult = _board->getAdcMultiplier();
         if (adc_mult == 0.0f) {
@@ -369,6 +407,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         } else {
           sprintf(reply, "> %.3f", adc_mult);
         }
+      } else if (memcmp(config, "flood.advert.base", 17) == 0) {
+          sprintf(reply, "> %s", StrHelper::ftoa(_prefs->flood_advert_base));
       // Power management commands
       } else if (memcmp(config, "pwrmgt.support", 14) == 0) {
 #ifdef NRF52_POWER_MANAGEMENT
@@ -545,6 +585,36 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         *dp = 0;
         savePrefs();
         strcpy(reply, "OK");
+      } else if (memcmp(config, "path.hash.mode ", 15) == 0) {
+        config += 15;
+        uint8_t mode = atoi(config);
+        if (mode < 3) {
+          _prefs->path_hash_mode = mode;
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error, must be 0,1, or 2");
+        }
+      } else if (memcmp(config, "loop.detect ", 12) == 0) {
+        config += 12;
+        uint8_t mode;
+        if (memcmp(config, "off", 3) == 0) {
+          mode = LOOP_DETECT_OFF;
+        } else if (memcmp(config, "minimal", 7) == 0) {
+          mode = LOOP_DETECT_MINIMAL;
+        } else if (memcmp(config, "moderate", 8) == 0) {
+          mode = LOOP_DETECT_MODERATE;
+        } else if (memcmp(config, "strict", 6) == 0) {
+          mode = LOOP_DETECT_STRICT;
+        } else {
+          mode = 0xFF;
+          strcpy(reply, "Error, must be: off, minimal, moderate, or strict");
+        }
+        if (mode != 0xFF) {
+          _prefs->loop_detect = mode;
+          savePrefs();
+          strcpy(reply, "OK");
+        }
       } else if (memcmp(config, "tx ", 3) == 0) {
         _prefs->tx_power_dbm = atoi(&config[3]);
         savePrefs();
@@ -616,6 +686,15 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
           _prefs->adc_multiplier = 0.0f;
           strcpy(reply, "Error: unsupported by this board");
         };
+      } else if (memcmp(config, "flood.advert.base ", 18) == 0) {
+        float f = atof(&config[18]);
+        if(f >= 0 && f <= 1) {
+          _prefs->flood_advert_base = f;
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error: base must be between 0 and 1");
+      }        
       } else {
         sprintf(reply, "unknown config: %s", config);
       }
@@ -691,6 +770,9 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       LocationProvider * l = _sensors->getLocationProvider();
       if (l != NULL) {
         l->syncTime();
+        strcpy(reply, "ok");
+      } else {
+        strcpy(reply, "gps provider not found");
       }
     } else if (memcmp(command, "gps setloc", 10) == 0) {
       _prefs->node_lat = _sensors->node_lat;
@@ -720,7 +802,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         _prefs->advert_loc_policy = ADVERT_LOC_SHARE;
         savePrefs();
         strcpy(reply, "ok");
-      } else if (memcmp(command+11, "prefs", 4) == 0) {
+      } else if (memcmp(command+11, "prefs", 5) == 0) {
         _prefs->advert_loc_policy = ADVERT_LOC_PREFS;
         savePrefs();
         strcpy(reply, "ok");

src/helpers/CommonCLI.h

@@ -13,6 +13,11 @@
 #define ADVERT_LOC_SHARE      1
 #define ADVERT_LOC_PREFS      2
 
+#define LOOP_DETECT_OFF       0
+#define LOOP_DETECT_MINIMAL   1
+#define LOOP_DETECT_MODERATE  2
+#define LOOP_DETECT_STRICT    3
+
 struct NodePrefs { // persisted to file
   float airtime_factor;
   char node_name[32];
@@ -36,6 +41,7 @@ struct NodePrefs { // persisted to file
   uint8_t flood_max;
   uint8_t interference_threshold;
   uint8_t agc_reset_interval; // secs / 4
+  float flood_advert_base;
   // Bridge settings
   uint8_t bridge_enabled; // boolean
   uint16_t bridge_delay;  // milliseconds (default 500 ms)
@@ -52,6 +58,8 @@ struct NodePrefs { // persisted to file
   uint32_t discovery_mod_timestamp;
   float adc_multiplier;
   char owner_info[120];
+  uint8_t path_hash_mode;   // which path mode to use when sending
+  uint8_t loop_detect;
 };
 
 class CommonCLICallbacks {

src/helpers/ContactInfo.h

@@ -3,12 +3,14 @@
 #include <Arduino.h>
 #include <Mesh.h>
 
+#define OUT_PATH_UNKNOWN   0xFF
+
 struct ContactInfo {
   mesh::Identity id;
   char name[32];
   uint8_t type;   // on of ADV_TYPE_*
   uint8_t flags;
-  int8_t out_path_len;
+  uint8_t out_path_len;
   mutable bool shared_secret_valid; // flag to indicate if shared_secret has been calculated
   uint8_t out_path[MAX_PATH_SIZE];
   uint32_t last_advert_timestamp;   // by THEIR clock

src/helpers/NRF52Board.cpp

@@ -297,6 +297,25 @@ float NRF52Board::getMCUTemperature() {
   return temp * 0.25f; // Convert to *C
 }
 
+bool NRF52Board::getBootloaderVersion(char* out, size_t max_len) {
+    static const char BOOTLOADER_MARKER[] = "UF2 Bootloader ";
+    const uint8_t* flash = (const uint8_t*)0x000FB000; // earliest known info.txt location is 0xFB90B, latest is 0xFCC4B
+
+    for (uint32_t i = 0; i < 0x3000 - (sizeof(BOOTLOADER_MARKER) - 1); i++) {
+        if (memcmp(&flash[i], BOOTLOADER_MARKER, sizeof(BOOTLOADER_MARKER) - 1) == 0) {
+            const char* ver = (const char*)&flash[i + sizeof(BOOTLOADER_MARKER) - 1];
+            size_t len = 0;
+            while (len < max_len - 1 && ver[len] != '\0' && ver[len] != ' ' && ver[len] != '\n' && ver[len] != '\r') {
+                out[len] = ver[len];
+                len++;
+            }
+            out[len] = '\0';
+            return len > 0; // bootloader string is non-empty
+        }
+    }
+    return false;
+}
+
 bool NRF52Board::startOTAUpdate(const char *id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice

src/helpers/NRF52Board.h

@@ -50,6 +50,7 @@ public:
   virtual uint8_t getStartupReason() const override { return startup_reason; }
   virtual float getMCUTemperature() override;
   virtual void reboot() override { NVIC_SystemReset(); }
+  virtual bool getBootloaderVersion(char* version, size_t max_len) override;
   virtual bool startOTAUpdate(const char *id, char reply[]) override;
   virtual void sleep(uint32_t secs) override;
 

src/helpers/RefCountedDigitalPin.h

@@ -20,7 +20,10 @@ public:
       digitalWrite(_pin, _active);
     }
   }
+
   void release() {
+    if (_claims == 0) return; // avoid negative _claims
+
     _claims--;
     if (_claims == 0) {
       digitalWrite(_pin, !_active);

src/helpers/StaticPoolPacketManager.cpp

@@ -11,7 +11,7 @@ PacketQueue::PacketQueue(int max_entries) {
 int PacketQueue::countBefore(uint32_t now) const {
   int n = 0;
   for (int j = 0; j < _num; j++) {
-    if (_schedule_table[j] > now) continue;   // scheduled for future... ignore for now
+    if ((int32_t)(_schedule_table[j] - now) > 0) continue;   // scheduled for future... ignore for now
     n++;
   }
   return n;
@@ -21,7 +21,7 @@ mesh::Packet* PacketQueue::get(uint32_t now) {
   uint8_t min_pri = 0xFF;
   int best_idx = -1;
   for (int j = 0; j < _num; j++) {
-    if (_schedule_table[j] > now) continue;   // scheduled for future... ignore for now
+    if ((int32_t)(_schedule_table[j] - now) > 0) continue;   // scheduled for future... ignore for now
     if (_pri_table[j] < min_pri) {  // select most important priority amongst non-future entries
       min_pri = _pri_table[j];
       best_idx = j;
@@ -55,15 +55,15 @@ mesh::Packet* PacketQueue::removeByIdx(int i) {
   return item;
 }
 
-void PacketQueue::add(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for) {
+bool PacketQueue::add(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for) {
   if (_num == _size) {
-    // TODO: log "FATAL: queue is full!"
-    return;
+    return false;
   }
   _table[_num] = packet;
   _pri_table[_num] = priority;
   _schedule_table[_num] = scheduled_for;
   _num++;
+  return true;
 }
 
 StaticPoolPacketManager::StaticPoolPacketManager(int pool_size): unused(pool_size), send_queue(pool_size), rx_queue(pool_size) {
@@ -82,7 +82,10 @@ void StaticPoolPacketManager::free(mesh::Packet* packet) {
 }
 
 void StaticPoolPacketManager::queueOutbound(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for) {
-  send_queue.add(packet, priority, scheduled_for);
+  if (!send_queue.add(packet, priority, scheduled_for)) {
+    MESH_DEBUG_PRINTLN("queueOutbound: send queue full, dropping packet");
+    free(packet);
+  }
 }
 
 mesh::Packet* StaticPoolPacketManager::getNextOutbound(uint32_t now) {
@@ -106,7 +109,10 @@ mesh::Packet* StaticPoolPacketManager::removeOutboundByIdx(int i) {
 }
 
 void StaticPoolPacketManager::queueInbound(mesh::Packet* packet, uint32_t scheduled_for) {
-  rx_queue.add(packet, 0, scheduled_for);
+  if (!rx_queue.add(packet, 0, scheduled_for)) {
+    MESH_DEBUG_PRINTLN("queueInbound: rx queue full, dropping packet");
+    free(packet);
+  }
 }
 mesh::Packet* StaticPoolPacketManager::getNextInbound(uint32_t now) {
   return rx_queue.get(now);

src/helpers/StaticPoolPacketManager.h

@@ -11,7 +11,7 @@ class PacketQueue {
 public:
   PacketQueue(int max_entries);
   mesh::Packet* get(uint32_t now);
-  void add(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for);
+  bool add(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for);
   int count() const { return _num; }
   int countBefore(uint32_t now) const;
   mesh::Packet* itemAt(int i) const { return _table[i]; }

src/helpers/esp32/SerialBLEInterface.cpp

@@ -1,4 +1,5 @@
 #include "SerialBLEInterface.h"
+#include "esp_mac.h"
 
 // See the following for generating UUIDs:
 // https://www.uuidgenerator.net/

src/helpers/radiolib/CustomLLCC68Wrapper.h

@@ -2,6 +2,7 @@
 
 #include "CustomLLCC68.h"
 #include "RadioLibWrappers.h"
+#include "SX126xReset.h"
 
 class CustomLLCC68Wrapper : public RadioLibWrapper {
 public:
@@ -19,4 +20,6 @@ public:
     int sf = ((CustomLLCC68 *)_radio)->spreadingFactor;
     return packetScoreInt(snr, sf, packet_len);
   }
+
+  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }
 };

src/helpers/radiolib/CustomLR1110.h

@@ -20,6 +20,8 @@ class CustomLR1110 : public LR1110 {
       return len;
     }
     
+    float getFreqMHz() const { return freqMHz; }
+
     bool isReceiving() {
       uint16_t irq = getIrqStatus();
       bool detected = ((irq & RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID) || (irq & RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED));

src/helpers/radiolib/CustomLR1110Wrapper.h

@@ -2,11 +2,13 @@
 
 #include "CustomLR1110.h"
 #include "RadioLibWrappers.h"
+#include "LR11x0Reset.h"
 
 class CustomLR1110Wrapper : public RadioLibWrapper {
 public:
   CustomLR1110Wrapper(CustomLR1110& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
-  bool isReceivingPacket() override { 
+  void doResetAGC() override { lr11x0ResetAGC((LR11x0 *)_radio, ((CustomLR1110 *)_radio)->getFreqMHz()); }
+  bool isReceivingPacket() override {
     return ((CustomLR1110 *)_radio)->isReceiving();
   }
   float getCurrentRSSI() override {

src/helpers/radiolib/CustomSTM32WLxWrapper.h

@@ -2,6 +2,7 @@
 
 #include "CustomSTM32WLx.h"
 #include "RadioLibWrappers.h"
+#include "SX126xReset.h"
 #include <math.h>
 
 class CustomSTM32WLxWrapper : public RadioLibWrapper {
@@ -20,4 +21,6 @@ public:
     int sf = ((CustomSTM32WLx *)_radio)->spreadingFactor;
     return packetScoreInt(snr, sf, packet_len);
   }
+
+  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }
 };

src/helpers/radiolib/CustomSX1262Wrapper.h

@@ -2,6 +2,7 @@
 
 #include "CustomSX1262.h"
 #include "RadioLibWrappers.h"
+#include "SX126xReset.h"
 
 class CustomSX1262Wrapper : public RadioLibWrapper {
 public:
@@ -22,4 +23,6 @@ public:
   virtual void powerOff() override {
     ((CustomSX1262 *)_radio)->sleep(false);
   }
+
+  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }
 };

src/helpers/radiolib/CustomSX1268Wrapper.h

@@ -2,6 +2,7 @@
 
 #include "CustomSX1268.h"
 #include "RadioLibWrappers.h"
+#include "SX126xReset.h"
 
 class CustomSX1268Wrapper : public RadioLibWrapper {
 public:
@@ -19,4 +20,6 @@ public:
     int sf = ((CustomSX1268 *)_radio)->spreadingFactor;
     return packetScoreInt(snr, sf, packet_len);
   }
+
+  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }
 };

src/helpers/radiolib/LR11x0Reset.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include <RadioLib.h>
+
+// Full receiver reset for LR11x0-family chips (LR1110, LR1120, LR1121).
+// Warm sleep powers down analog, calibrate(0x3F) refreshes all calibration blocks,
+// then re-applies RX settings that calibration may reset.
+inline void lr11x0ResetAGC(LR11x0* radio, float freqMHz) {
+  radio->sleep(true, 0);
+  radio->standby(RADIOLIB_LR11X0_STANDBY_RC, true);
+
+  radio->calibrate(RADIOLIB_LR11X0_CALIBRATE_ALL);
+
+  // calibrate(0x3F) defaults image calibration to 902-928MHz band.
+  // Re-calibrate for the actual operating frequency (band=4MHz matches RadioLib default).
+  radio->calibrateImageRejection(freqMHz - 4.0f, freqMHz + 4.0f);
+
+#ifdef RX_BOOSTED_GAIN
+  radio->setRxBoostedGainMode(RX_BOOSTED_GAIN);
+#endif
+}

src/helpers/radiolib/RadioLibWrappers.cpp

@@ -53,13 +53,24 @@ void RadioLibWrapper::triggerNoiseFloorCalibrate(int threshold) {
   }
 }
 
+void RadioLibWrapper::doResetAGC() {
+  _radio->sleep();  // warm sleep to reset analog frontend
+}
+
 void RadioLibWrapper::resetAGC() {
   // make sure we're not mid-receive of packet!
   if ((state & STATE_INT_READY) != 0 || isReceivingPacket()) return;
 
-  // NOTE: according to higher powers, just issuing RadioLib's startReceive() will reset the AGC.
-  //      revisit this if a better impl is discovered.
+  doResetAGC();
   state = STATE_IDLE;   // trigger a startReceive()
+
+  // Reset noise floor sampling so it reconverges from scratch.
+  // Without this, a stuck _noise_floor of -120 makes the sampling threshold
+  // too low (-106) to accept normal samples (~-105), self-reinforcing the
+  // stuck value even after the receiver has recovered.
+  _noise_floor = 0;
+  _num_floor_samples = 0;
+  _floor_sample_sum = 0;
 }
 
 void RadioLibWrapper::loop() {

src/helpers/radiolib/RadioLibWrappers.h

@@ -16,6 +16,7 @@ protected:
   void startRecv();
   float packetScoreInt(float snr, int sf, int packet_len);
   virtual bool isReceivingPacket() =0;
+  virtual void doResetAGC();
 
 public:
   RadioLibWrapper(PhysicalLayer& radio, mesh::MainBoard& board) : _radio(&radio), _board(&board) { n_recv = n_sent = 0; }

src/helpers/radiolib/SX126xReset.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#include <RadioLib.h>
+
+// Full receiver reset for all SX126x-family chips (SX1262, SX1268, LLCC68, STM32WLx).
+// Warm sleep powers down analog, Calibrate(0x7F) refreshes ADC/PLL/image calibration,
+// then re-applies RX settings that calibration may reset.
+inline void sx126xResetAGC(SX126x* radio) {
+  radio->sleep(true);
+  radio->standby(RADIOLIB_SX126X_STANDBY_RC, true);
+
+  uint8_t calData = RADIOLIB_SX126X_CALIBRATE_ALL;
+  radio->mod->SPIwriteStream(RADIOLIB_SX126X_CMD_CALIBRATE, &calData, 1, true, false);
+  radio->mod->hal->delay(5);
+  uint32_t start = millis();
+  while (radio->mod->hal->digitalRead(radio->mod->getGpio())) {
+    if (millis() - start > 50) break;
+    radio->mod->hal->yield();
+  }
+
+  // Calibrate(0x7F) defaults image calibration to 902-928MHz band.
+  // Re-calibrate for the actual operating frequency.
+  radio->calibrateImage(radio->freqMHz);
+
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio->setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio->setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+#ifdef SX126X_REGISTER_PATCH
+  uint8_t r_data = 0;
+  radio->readRegister(0x8B5, &r_data, 1);
+  r_data |= 0x01;
+  radio->writeRegister(0x8B5, &r_data, 1);
+#endif
+}

src/helpers/sensors/EnvironmentSensorManager.cpp

@@ -683,7 +683,7 @@ void EnvironmentSensorManager::start_gps() {
   _location->begin();
   _location->reset();
 
-#ifndef PIN_GPS_RESET
+#ifndef PIN_GPS_EN
   MESH_DEBUG_PRINTLN("Start GPS is N/A on this board. Actual GPS state unchanged");
 #endif
 }
@@ -707,7 +707,9 @@ void EnvironmentSensorManager::loop() {
   static long next_gps_update = 0;
 
   #if ENV_INCLUDE_GPS
-  _location->loop();
+  if (gps_active) {
+    _location->loop();
+  }
   if (millis() > next_gps_update) {
 
     if(gps_active){

src/helpers/sensors/MicroNMEALocationProvider.h

@@ -79,7 +79,10 @@ public :
         if (_pin_en != -1) {
             digitalWrite(_pin_en, !PIN_GPS_EN_ACTIVE);
         }
-        if (_peripher_power) _peripher_power->release();  
+        if (_pin_reset != -1) {
+            digitalWrite(_pin_reset, GPS_RESET_FORCE);
+        }
+        if (_peripher_power) _peripher_power->release();
     }
 
     bool isEnabled() override {

variants/heltec_tracker/platformio.ini

@@ -32,6 +32,11 @@ build_flags =
   -D PIN_TFT_LEDA_CTL=21     ; LEDK (switches on/off via mosfet to create the ground)
   -D PIN_GPS_RX=33
   -D PIN_GPS_TX=34
+  -D PIN_GPS_EN=35              ; N-ch MOSFET Q2 drives P-ch high-side switch → active HIGH (default)
+  -D PIN_GPS_RESET=36
+  -D PIN_GPS_RESET_ACTIVE=LOW
+  -D GPS_BAUD_RATE=115200
+  -D ENV_INCLUDE_GPS=1
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
@@ -43,6 +48,31 @@ lib_deps =
   stevemarple/MicroNMEA @ ^2.0.6
   adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
 
+[env:Heltec_Wireless_Tracker_companion_radio_usb]
+extends = Heltec_tracker_base
+build_flags =
+  ${Heltec_tracker_base.build_flags}
+  -I src/helpers/ui
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_ROTATION=1
+  -D DISPLAY_CLASS=ST7735Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+; -D BLE_PIN_CODE=123456 ; HWT will use display for pin
+; -D OFFLINE_QUEUE_SIZE=256
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_tracker_base.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+  +<helpers/ui/ST7735Display.cpp>
+lib_deps =
+  ${Heltec_tracker_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
 [env:Heltec_Wireless_Tracker_companion_radio_ble]
 extends = Heltec_tracker_base
 build_flags =

variants/heltec_tracker/target.cpp

@@ -16,7 +16,8 @@ WRAPPER_CLASS radio_driver(radio, board);
 
 ESP32RTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+// GPS_EN (GPIO35) drives N-ch MOSFET → P-ch high-side switch; GPS_RESET (GPIO36) active LOW
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN, &board.periph_power);
 HWTSensorManager sensors = HWTSensorManager(nmea);
 
 #ifdef DISPLAY_CLASS
@@ -58,18 +59,16 @@ mesh::LocalIdentity radio_new_identity() {
 
 void HWTSensorManager::start_gps() {
   if (!gps_active) {
-    board.periph_power.claim();
-
+    _location->begin();  // Claims periph_power via RefCountedDigitalPin
     gps_active = true;
-    Serial1.println("$CFGSYS,h35155*68");
+    Serial1.println("$CFGSYS,h35155*68");  // Configure GPS for all constellations
   }
 }
 
 void HWTSensorManager::stop_gps() {
   if (gps_active) {
     gps_active = false;
-
-    board.periph_power.release();
+    _location->stop();  // Releases periph_power via RefCountedDigitalPin
   }
 }
 

variants/heltec_tracker/target.h

@@ -28,6 +28,7 @@ public:
   const char* getSettingName(int i) const override;
   const char* getSettingValue(int i) const override;
   bool setSettingValue(const char* name, const char* value) override;
+  LocationProvider* getLocationProvider() override { return _location; }
 };
 
 extern HeltecV3Board board;

variants/heltec_tracker_v2/HeltecTrackerV2Board.cpp

@@ -6,18 +6,26 @@ void HeltecTrackerV2Board::begin() {
     pinMode(PIN_ADC_CTRL, OUTPUT);
     digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive
 
+    // Set up digital GPIO registers before releasing RTC hold. The hold latches
+    // the pad state including function select, so register writes accumulate
+    // without affecting the pad. On hold release, all changes apply atomically
+    // (IO MUX switches to digital GPIO with output already HIGH — no glitch).
     pinMode(P_LORA_PA_POWER, OUTPUT);
     digitalWrite(P_LORA_PA_POWER,HIGH);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
 
-    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
     pinMode(P_LORA_PA_EN, OUTPUT);
     digitalWrite(P_LORA_PA_EN,HIGH);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
     pinMode(P_LORA_PA_TX_EN, OUTPUT);
     digitalWrite(P_LORA_PA_TX_EN,LOW);
 
-    periph_power.begin();
-
     esp_reset_reason_t reason = esp_reset_reason();
+    if (reason != ESP_RST_DEEPSLEEP) {
+      delay(1);  // GC1109 startup time after cold power-on
+    }
+
+    periph_power.begin();
     if (reason == ESP_RST_DEEPSLEEP) {
       long wakeup_source = esp_sleep_get_ext1_wakeup_status();
       if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
@@ -48,7 +56,9 @@ void HeltecTrackerV2Board::begin() {
 
     rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
 
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN); //It also needs to be enabled in receive mode
+    // Hold GC1109 FEM pins during sleep to keep LNA active for RX wake
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN);
 
     if (pin_wake_btn < 0) {
       esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet

variants/heltec_tracker_v2/platformio.ini

@@ -17,15 +17,16 @@ build_flags =
   -D P_LORA_SCLK=9
   -D P_LORA_MISO=11
   -D P_LORA_MOSI=10
-  -D P_LORA_PA_POWER=7 ;power en
-  -D P_LORA_PA_EN=4
-  -D P_LORA_PA_TX_EN=46  ;enable tx
-  -D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
-  -D MAX_LORA_TX_POWER=22 ;Max SX1262 output
+  -D P_LORA_PA_POWER=7   ; VFEM_Ctrl - GC1109 LDO power enable
+  -D P_LORA_PA_EN=4      ; CSD - GC1109 chip enable (HIGH=on)
+  -D P_LORA_PA_TX_EN=46  ; CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
+  -D LORA_TX_POWER=10    ; 10dBm + ~11dB GC1109 gain = ~21dBm output
+  -D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D SX126X_REGISTER_PATCH=1
   -D PIN_BOARD_SDA=5
   -D PIN_BOARD_SCL=6
   -D PIN_USER_BTN=0

variants/heltec_v4/HeltecV4Board.cpp

@@ -7,19 +7,26 @@ void HeltecV4Board::begin() {
     pinMode(PIN_ADC_CTRL, OUTPUT);
     digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive
 
+    // Set up digital GPIO registers before releasing RTC hold. The hold latches
+    // the pad state including function select, so register writes accumulate
+    // without affecting the pad. On hold release, all changes apply atomically
+    // (IO MUX switches to digital GPIO with output already HIGH — no glitch).
     pinMode(P_LORA_PA_POWER, OUTPUT);
     digitalWrite(P_LORA_PA_POWER,HIGH);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
 
-    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
     pinMode(P_LORA_PA_EN, OUTPUT);
     digitalWrite(P_LORA_PA_EN,HIGH);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
     pinMode(P_LORA_PA_TX_EN, OUTPUT);
     digitalWrite(P_LORA_PA_TX_EN,LOW);
 
+    esp_reset_reason_t reason = esp_reset_reason();
+    if (reason != ESP_RST_DEEPSLEEP) {
+      delay(1);  // GC1109 startup time after cold power-on
+    }
 
     periph_power.begin();
-
-    esp_reset_reason_t reason = esp_reset_reason();
     if (reason == ESP_RST_DEEPSLEEP) {
       long wakeup_source = esp_sleep_get_ext1_wakeup_status();
       if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
@@ -50,7 +57,9 @@ void HeltecV4Board::begin() {
 
     rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
 
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN); //It also needs to be enabled in receive mode
+    // Hold GC1109 FEM pins during sleep to keep LNA active for RX wake
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN);
 
     if (pin_wake_btn < 0) {
       esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet

variants/heltec_v4/platformio.ini

@@ -22,7 +22,7 @@ build_flags =
   -D P_LORA_PA_TX_EN=46  ; PA CPS - GC1109 TX PA full(High) / bypass(Low)
   -D PIN_USER_BTN=0
   -D PIN_VEXT_EN=36
-  -D PIN_VEXT_EN_ACTIVE=LOW
+  -D PIN_VEXT_EN_ACTIVE=HIGH
   -D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
   -D MAX_LORA_TX_POWER=22 ; Max SX1262 output
   -D SX126X_REGISTER_PATCH=1       ; Patch register 0x8B5 for improved RX
@@ -54,8 +54,6 @@ build_flags =
   -D PIN_BOARD_SDA=17
   -D PIN_BOARD_SCL=18
   -D PIN_OLED_RESET=21
-  -D ENV_PIN_SDA=4
-  -D ENV_PIN_SCL=3
 build_src_filter= ${Heltec_lora32_v4.build_src_filter}
 lib_deps = ${Heltec_lora32_v4.lib_deps}
 

variants/heltec_v4/target.cpp

@@ -24,7 +24,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #endif
 
 #ifdef DISPLAY_CLASS
-  DISPLAY_CLASS display(&(board.periph_power));
+  DISPLAY_CLASS display(NULL);
   MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif
 

variants/ikoka_handheld_nrf/platformio.ini

@@ -1,5 +1,7 @@
 [ikoka_handheld_nrf]
 extends = nrf52_base
+board = seeed-xiao-afruitnrf52-nrf52840
+board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52_base.build_flags}
   ${sensor_base.build_flags}
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
@@ -48,7 +50,8 @@ build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
   +<../examples/companion_radio/*.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_ble]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
+board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D BLE_PIN_CODE=123456
   -D LORA_TX_POWER=20
@@ -56,7 +59,8 @@ build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_ble]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
+board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D BLE_PIN_CODE=123456
   -D LORA_TX_POWER=20
@@ -65,20 +69,22 @@ build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_usb]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
+board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D LORA_TX_POWER=20
 build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_usb]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
+board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D LORA_TX_POWER=20
   -D DISPLAY_ROTATION=2
 build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
 
 [env:ikoka_handheld_nrf_e22_30dbm_repeater]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
 build_flags =
   ${ikoka_handheld_nrf.build_flags}
   -D ADVERT_NAME='"ikoka_handheld Repeater"'
@@ -91,7 +97,7 @@ build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_room_server]
-extends = ikoka_nrf52
+extends = ikoka_handheld_nrf
 build_flags =
   ${ikoka_handheld_nrf.build_flags}
   -D ADVERT_NAME='"ikoka_handheld Room"'

variants/lilygo_tbeam_supreme_SX1262/platformio.ini

@@ -26,7 +26,9 @@ build_src_filter = ${esp32_base.build_src_filter}
   +<helpers/ui/SH1106Display.cpp>
   +<helpers/esp32/TBeamBoard.cpp>
   +<helpers/sensors>
-board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
+board_build.partitions = default_8MB.csv
+board_upload.flash_size = 8MB
+board_upload.maximum_size = 8388608
 lib_deps =
   ${esp32_base.lib_deps}
   lewisxhe/XPowersLib @ ^0.2.7
@@ -131,3 +133,27 @@ build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter}
 lib_deps =
   ${T_Beam_S3_Supreme_SX1262.lib_deps}
   densaugeo/base64 @ ~1.4.0
+
+[env:T_Beam_S3_Supreme_SX1262_companion_radio_wifi]
+extends = T_Beam_S3_Supreme_SX1262
+build_flags =
+  ${T_Beam_S3_Supreme_SX1262.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=256
+  -D WIFI_SSID='"WIFI_SSID"'
+  -D WIFI_PWD='"Password"'
+;  -D WIFI_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=8
+;  -D MESH_DEBUG=1
+;  -D ARDUHAL_LOG_LEVEL=4
+;  -D CORE_DEBUG_LEVEL=4
+build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${T_Beam_S3_Supreme_SX1262.lib_deps}
+  densaugeo/base64 @ ~1.4.0

variants/lilygo_tlora_v2_1/platformio.ini

@@ -18,7 +18,7 @@ build_flags =
   -D P_LORA_SCLK=5      ; SPI clock
   -D P_LORA_MISO=19     ; SPI MISO
   -D P_LORA_MOSI=27     ; SPI MOSI
-  -D P_LORA_TX_LED=2    ; LED pin for TX indication
+  -D P_LORA_TX_LED=25    ; LED pin for TX indication
   -D PIN_BOARD_SDA=21
   -D PIN_BOARD_SCL=22
   -D PIN_VBAT_READ=35   ; Battery voltage reading (analog pin)
@@ -65,7 +65,7 @@ build_flags =
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter}
-  +<../examples/simple_repeater>
+  +<../examples/simple_secure_chat/main.cpp>
 lib_deps =
   ${LilyGo_TLora_V2_1_1_6.lib_deps}
   densaugeo/base64 @ ~1.4.0
@@ -191,4 +191,4 @@ build_flags =
 ;  -D CORE_DEBUG_LEVEL=3
 lib_deps =
   ${LilyGo_TLora_V2_1_1_6.lib_deps}
-  ${esp32_ota.lib_deps}
+  ${esp32_ota.lib_deps}

variants/m5stack_unit_c6l/platformio.ini

@@ -5,7 +5,7 @@ board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 build_flags =
   ${esp32c6_base.build_flags}
   ${sensor_base.build_flags}
-  -I variants/M5Stack_Unit_C6L
+  -I variants/m5stack_unit_c6l
   -D P_LORA_TX_LED=15
   -D P_LORA_SCLK=20
   -D P_LORA_MISO=22
@@ -94,6 +94,8 @@ build_flags = ${M5Stack_Unit_C6L.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D OFFLINE_QUEUE_SIZE=256
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D ARDUINO_USB_MODE=1
 build_src_filter = ${M5Stack_Unit_C6L.build_src_filter}
   +<helpers/esp32/*.cpp>
   -<helpers/esp32/ESPNOWRadio.cpp>

variants/rak3112/platformio.ini

@@ -7,6 +7,7 @@ build_flags =
   -I variants/rak3112
   -D RAK_3112=1
   -D ESP32_CPU_FREQ=80
+  -D ARDUINO_USB_CDC_ON_BOOT=1
   -D P_LORA_DIO_1=47
   -D P_LORA_NSS=7
   -D P_LORA_RESET=8
@@ -131,14 +132,14 @@ lib_deps =
 extends = rak3112
 build_flags =
   ${rak3112.build_flags}
-  -I examples/companion_radio/ui-new
+  -I examples/companion_radio/ui-orig
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
 build_src_filter = ${rak3112.build_src_filter}
   +<../examples/companion_radio/*.cpp>
-  +<../examples/companion_radio/ui-new/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
 lib_deps =
   ${rak3112.lib_deps}
   densaugeo/base64 @ ~1.4.0
@@ -147,7 +148,7 @@ lib_deps =
 extends = rak3112
 build_flags =
   ${rak3112.build_flags}
-  -I examples/companion_radio/ui-new
+  -I examples/companion_radio/ui-orig
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D BLE_PIN_CODE=123456   ; dynamic, random PIN
@@ -159,7 +160,7 @@ build_flags =
 build_src_filter = ${rak3112.build_src_filter}
   +<helpers/esp32/*.cpp>
   +<../examples/companion_radio/*.cpp>
-  +<../examples/companion_radio/ui-new/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
 lib_deps =
   ${rak3112.lib_deps}
   densaugeo/base64 @ ~1.4.0
@@ -168,7 +169,7 @@ lib_deps =
 extends = rak3112
 build_flags =
   ${rak3112.build_flags}
-  -I examples/companion_radio/ui-new
+  -I examples/companion_radio/ui-orig
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D WIFI_DEBUG_LOGGING=1
@@ -180,7 +181,7 @@ build_flags =
 build_src_filter = ${rak3112.build_src_filter}
   +<helpers/esp32/*.cpp>
   +<../examples/companion_radio/*.cpp>
-  +<../examples/companion_radio/ui-new/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
 lib_deps =
   ${rak3112.lib_deps}
   densaugeo/base64 @ ~1.4.0

variants/rak3401/RAK3401Board.cpp

@@ -20,13 +20,29 @@ void RAK3401Board::begin() {
 
   Wire.begin();
 
+  // PIN_3V3_EN (WB_IO2, P0.34) controls the 3V3_S switched peripheral rail
+  // AND the 5V boost regulator (U5) on the RAK13302 that powers the SKY66122 PA.
+  // Must stay HIGH during radio operation — do not toggle for power saving.
   pinMode(PIN_3V3_EN, OUTPUT);
   digitalWrite(PIN_3V3_EN, HIGH);
 
-#ifdef P_LORA_PA_EN
-  // Initialize RAK13302 1W LoRa transceiver module PA control pin
-  pinMode(P_LORA_PA_EN, OUTPUT);
-  digitalWrite(P_LORA_PA_EN, LOW);  // Start with PA disabled
-  delay(10);  // Allow PA module to initialize
+  // Enable SKY66122-11 FEM on the RAK13302 module.
+  // CSD and CPS are tied together on the RAK13302 PCB, routed to IO3 (P0.21).
+  // HIGH = FEM active (LNA for RX, PA path available for TX).
+  // TX/RX switching (CTX) is handled by SX1262 DIO2 via SetDIO2AsRfSwitchCtrl.
+  pinMode(SX126X_POWER_EN, OUTPUT);
+  digitalWrite(SX126X_POWER_EN, HIGH);
+  delay(1);  // SKY66122 turn-on settling time (tON = 3us typ)
+}
+
+#ifdef NRF52_POWER_MANAGEMENT
+void RAK3401Board::initiateShutdown(uint8_t reason) {
+  // Disable SKY66122 FEM (CSD+CPS LOW = shutdown, <1 uA)
+  digitalWrite(SX126X_POWER_EN, LOW);
+
+  // Disable 3V3 switched peripherals and 5V boost
+  digitalWrite(PIN_3V3_EN, LOW);
+
+  enterSystemOff(reason);
+}
 #endif
-}

variants/rak3401/RAK3401Board.h

@@ -38,13 +38,6 @@ public:
     return "RAK 3401";
   }
 
-#ifdef P_LORA_PA_EN
-  void onBeforeTransmit() override {
-    digitalWrite(P_LORA_PA_EN, HIGH);  // Enable PA before transmission
-  }
-
-  void onAfterTransmit() override {
-    digitalWrite(P_LORA_PA_EN, LOW);   // Disable PA after transmission to save power
-  }
-#endif
+  // TX/RX switching is handled by SX1262 DIO2 -> SKY66122 CTX (hardware-timed).
+  // No onBeforeTransmit/onAfterTransmit overrides needed.
 };

variants/rak3401/platformio.ini

@@ -11,6 +11,7 @@ build_flags = ${nrf52_base.build_flags}
   -D LORA_TX_POWER=22
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D SX126X_REGISTER_PATCH=1       ; Patch register 0x8B5 for improved RX with SKY66122 FEM
 build_src_filter = ${nrf52_base.build_src_filter}
   +<../variants/rak3401>
   +<helpers/sensors>

variants/rak3401/variant.h

@@ -147,8 +147,15 @@ static const uint8_t AREF = PIN_AREF;
 #define SX126X_BUSY (9)
 #define SX126X_RESET (4)
 
-#define SX126X_POWER_EN (21)
-// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+// SKY66122-11 FEM control on the RAK13302 module:
+//   CSD + CPS are tied together on the PCB, routed to WisBlock IO3 (P0.21).
+//   Setting IO3 HIGH enables the FEM (LNA for RX, PA path for TX).
+//   CTX is connected to SX1262 DIO2 — the radio handles TX/RX switching
+//   in hardware via SetDIO2AsRfSwitchCtrl (microsecond-accurate, no GPIO needed).
+//   The 5V boost for the PA is enabled by WB_IO2 (P0.34 = PIN_3V3_EN).
+#define SX126X_POWER_EN (21)        // P0.21 = IO3 -> SKY66122 CSD+CPS (FEM enable)
+
+// CTX is driven by SX1262 DIO2, not a GPIO
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
@@ -159,7 +166,6 @@ static const uint8_t AREF = PIN_AREF;
 #define P_LORA_DIO_1 SX126X_DIO1
 #define P_LORA_BUSY SX126X_BUSY
 #define P_LORA_RESET SX126X_RESET
-#define P_LORA_PA_EN  31
 
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings

variants/rak4631/variant.h

@@ -106,7 +106,7 @@ extern "C"
 
 // Power management boot protection threshold (millivolts)
 // Set to 0 to disable boot protection
-#define PWRMGT_VOLTAGE_BOOTLOCK 3300   // Won't boot below this voltage (mV)
+#define PWRMGT_VOLTAGE_BOOTLOCK 0   // Won't boot below this voltage (mV)
 // LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
 // AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
 #define PWRMGT_LPCOMP_AIN 3

variants/wio-tracker-l1/platformio.ini

@@ -96,6 +96,8 @@ build_flags = ${WioTrackerL1.build_flags}
   -D PIN_BUZZER=12
   -D QSPIFLASH=1
   -D ADVERT_NAME='"@@MAC"'
+  -D ENV_PIN_SDA=PIN_WIRE1_SDA
+  -D ENV_PIN_SCL=PIN_WIRE1_SCL
   ; -D MESH_PACKET_LOGGING=1
   ; -D MESH_DEBUG=1
 build_src_filter = ${WioTrackerL1.build_src_filter}