rak4631, Xiao NRf, T114: set lockout voltage to 0V

set default: disable flood adverts
Integration of upstrem PR #1810
2026-03-08 10:10:02 +01:00 · 2026-03-08 10:10:02 +01:00 · 2026-03-08 10:10:02 +01:00 · 2026-03-08 10:10:01 +01:00 · 2026-03-08 10:09:59 +01:00 · 2026-03-08 01:54:26 +13:00
57 changed files with 192 additions and 94 deletions
--- a/.devcontainer/devcontainer.json
+++ b/.devcontainer/devcontainer.json
@@ -2,6 +2,7 @@
 	"name": "MeshCore",
 	"image": "mcr.microsoft.com/devcontainers/python:3-bookworm",
 	"features": {
+		"ghcr.io/devcontainers-extra/features/bun:1": {},
 		"ghcr.io/rocker-org/devcontainer-features/apt-packages:1": {
 			"packages": [
 				"sudo"
@@ -11,14 +12,15 @@
 	"runArgs": [
 		"--privileged",
 		"--network=host",
-		"--volume=/dev/bus/usb:/dev/bus/usb:ro",
-		// arch tty* is owned by uucp (986)
+		"--device=/dev/bus/usb",
+		// arch linux tty* is owned by uucp (986)
+		"--group-add=986",
 		// debian tty* is owned by dialout (20)
-		"--group-add=20",
-		"--group-add=986"
+		"--group-add=20"
 	],
 	"postCreateCommand": {
-		"platformio": "pipx install platformio"
+		"platformio": "pipx install platformio",
+		"opencode": "curl -fsSL https://opencode.ai/install | bash"
 	},
 	"customizations": {
 		"vscode": {
--- a/boards/heltec_mesh_pocket.json
+++ b/boards/heltec_mesh_pocket.json
@@ -39,7 +39,7 @@
    "frameworks": ["arduino"],
    "name": "Heltec nrf (Adafruit BSP)",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
--- a/boards/heltec_mesh_solar.json
+++ b/boards/heltec_mesh_solar.json
@@ -42,7 +42,7 @@
  ],
  "name": "Heltec Mesh Solar Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
--- a/boards/heltec_t114.json
+++ b/boards/heltec_t114.json
@@ -42,7 +42,7 @@
  ],
  "name": "Heltec T114 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
--- a/boards/keepteen_lt1.json
+++ b/boards/keepteen_lt1.json
@@ -60,7 +60,7 @@
    ],
    "name": "Keepteen LT1",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
--- a/boards/meshtiny.json
+++ b/boards/meshtiny.json
@@ -55,7 +55,7 @@
  ],
  "name": "Meshtiny",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
--- a/boards/minewsemi_me25ls01.json
+++ b/boards/minewsemi_me25ls01.json
@@ -38,8 +38,8 @@
  "frameworks": ["arduino"],
  "name": "Minewsemi ME25LS01",
  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
    "speed": 115200,
    "protocol": "nrfutil",
    "protocols": [
--- a/boards/nano-g2-ultra.json
+++ b/boards/nano-g2-ultra.json
@@ -54,7 +54,7 @@
    ],
    "name": "BQ nRF52840",
    "upload": {
-        "maximum_ram_size": 248832,
+        "maximum_ram_size": 235520,
        "maximum_size": 815104,
        "speed": 115200,
        "protocol": "nrfutil",
--- a/boards/promicro_nrf52840.json
+++ b/boards/promicro_nrf52840.json
@@ -60,7 +60,7 @@
    ],
    "name": "ProMicro NRF52840",
    "upload": {
-      "maximum_ram_size": 248832,
+      "maximum_ram_size": 235520,
      "maximum_size": 815104,
      "speed": 115200,
      "protocol": "nrfutil",
--- a/boards/rak3401.json
+++ b/boards/rak3401.json
@@ -53,7 +53,7 @@
  ],
  "name": "WisCore RAK3401 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
--- a/boards/rak4631.json
+++ b/boards/rak4631.json
@@ -53,7 +53,7 @@
  ],
  "name": "WisCore RAK4631 Board",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
--- a/boards/seeed-wio-tracker-l1.json
+++ b/boards/seeed-wio-tracker-l1.json
@@ -40,7 +40,7 @@
  ],
  "name": "Seeed Wio Tracker L1",
  "upload": {
-    "maximum_ram_size": 237568,
+    "maximum_ram_size": 235520,
    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
--- a/boards/seeed-xiao-afruitnrf52-nrf52840.json
+++ b/boards/seeed-xiao-afruitnrf52-nrf52840.json
@@ -40,7 +40,7 @@
  ],
  "name": "Seeed Studio XIAO nRF52840",
  "upload": {
-    "maximum_ram_size": 237568,
+    "maximum_ram_size": 235520,
    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
--- a/boards/seeed_sensecap_solar.json
+++ b/boards/seeed_sensecap_solar.json
@@ -39,8 +39,8 @@
  ],
  "name": "Seeed Studio XIAO nRF52840",
  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
    "protocol": "nrfutil",
    "speed": 115200,
    "protocols": [
--- a/boards/t-echo.json
+++ b/boards/t-echo.json
@@ -45,7 +45,7 @@
  ],
  "name": "LilyGo T-ECHO",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "require_upload_port": true,
    "speed": 115200,
--- a/boards/thinknode_m1.json
+++ b/boards/thinknode_m1.json
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow eink",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
--- a/boards/thinknode_m3.json
+++ b/boards/thinknode_m3.json
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow nrf",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
--- a/boards/thinknode_m6.json
+++ b/boards/thinknode_m6.json
@@ -53,7 +53,7 @@
  ],
  "name": "elecrow solar",
  "upload": {
-    "maximum_ram_size": 248832,
+    "maximum_ram_size": 235520,
    "maximum_size": 815104,
    "speed": 115200,
    "use_1200bps_touch": true,
--- a/boards/tracker-t1000-e.json
+++ b/boards/tracker-t1000-e.json
@@ -38,8 +38,8 @@
  "frameworks": ["arduino"],
  "name": "Seeed T1000-E",
  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
    "speed": 115200,
    "protocol": "nrfutil",
    "protocols": [
--- a/examples/companion_radio/MyMesh.cpp
+++ b/examples/companion_radio/MyMesh.cpp
@@ -1716,7 +1716,7 @@ void MyMesh::handleCmdFrame(size_t len) {
      out_frame[i++] = STATS_TYPE_CORE;
      uint16_t battery_mv = board.getBattMilliVolts();
      uint32_t uptime_secs = _ms->getMillis() / 1000;
-      uint8_t queue_len = (uint8_t)_mgr->getOutboundCount(0xFFFFFFFF);
+      uint8_t queue_len = (uint8_t)_mgr->getOutboundTotal();
      memcpy(&out_frame[i], &battery_mv, 2); i += 2;
      memcpy(&out_frame[i], &uptime_secs, 4); i += 4;
      memcpy(&out_frame[i], &_err_flags, 2); i += 2;
--- a/examples/simple_repeater/MyMesh.cpp
+++ b/examples/simple_repeater/MyMesh.cpp
@@ -219,7 +219,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
  if (payload[0] == REQ_TYPE_GET_STATUS) {  // guests can also access this now
    RepeaterStats stats;
    stats.batt_milli_volts = board.getBattMilliVolts();
-    stats.curr_tx_queue_len = _mgr->getOutboundCount(0xFFFFFFFF);
+    stats.curr_tx_queue_len = _mgr->getOutboundTotal();
    stats.noise_floor = (int16_t)_radio->getNoiseFloor();
    stats.last_rssi = (int16_t)radio_driver.getLastRSSI();
    stats.n_packets_recv = radio_driver.getPacketsRecv();
@@ -1334,5 +1334,5 @@ bool MyMesh::hasPendingWork() const {
 #if defined(WITH_BRIDGE)
  if (bridge.isRunning()) return true;  // bridge needs WiFi radio, can't sleep
 #endif
-  return _mgr->getOutboundCount(0xFFFFFFFF) > 0;
+  return _mgr->getOutboundTotal() > 0;
 }
--- a/examples/simple_room_server/MyMesh.cpp
+++ b/examples/simple_room_server/MyMesh.cpp
@@ -140,7 +140,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
  if (payload[0] == REQ_TYPE_GET_STATUS) {
    ServerStats stats;
    stats.batt_milli_volts = board.getBattMilliVolts();
-    stats.curr_tx_queue_len = _mgr->getOutboundCount(0xFFFFFFFF);
+    stats.curr_tx_queue_len = _mgr->getOutboundTotal();
    stats.noise_floor = (int16_t)_radio->getNoiseFloor();
    stats.last_rssi = (int16_t)radio_driver.getLastRSSI();
    stats.n_packets_recv = radio_driver.getPacketsRecv();
--- a/src/Dispatcher.h
+++ b/src/Dispatcher.h
@@ -90,6 +90,7 @@ public:
  virtual void queueOutbound(Packet* packet, uint8_t priority, uint32_t scheduled_for) = 0;
  virtual Packet* getNextOutbound(uint32_t now) = 0;    // by priority
  virtual int getOutboundCount(uint32_t now) const = 0;
+  virtual int getOutboundTotal() const = 0;
  virtual int getFreeCount() const = 0;
  virtual Packet* getOutboundByIdx(int i) = 0;
  virtual Packet* removeOutboundByIdx(int i) = 0;
--- a/src/helpers/StaticPoolPacketManager.cpp
+++ b/src/helpers/StaticPoolPacketManager.cpp
@@ -9,6 +9,8 @@ PacketQueue::PacketQueue(int max_entries) {
 }

 int PacketQueue::countBefore(uint32_t now) const {
+  if (now == 0xFFFFFFFF) return _num;  // sentinel: count all entries regardless of schedule
+
  int n = 0;
  for (int j = 0; j < _num; j++) {
    if ((int32_t)(_schedule_table[j] - now) > 0) continue;   // scheduled for future... ignore for now
@@ -97,6 +99,10 @@ int  StaticPoolPacketManager::getOutboundCount(uint32_t now) const {
  return send_queue.countBefore(now);
 }

+int  StaticPoolPacketManager::getOutboundTotal() const {
+  return send_queue.count();
+}
+
 int StaticPoolPacketManager::getFreeCount() const {
  return unused.count();
 }
--- a/src/helpers/StaticPoolPacketManager.h
+++ b/src/helpers/StaticPoolPacketManager.h
@@ -29,6 +29,7 @@ public:
  void queueOutbound(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for) override;
  mesh::Packet* getNextOutbound(uint32_t now) override;
  int getOutboundCount(uint32_t now) const override;
+  int getOutboundTotal() const override;
  int getFreeCount() const override;
  mesh::Packet* getOutboundByIdx(int i) override;
  mesh::Packet* removeOutboundByIdx(int i) override;
--- a/src/helpers/StatsFormatHelper.h
+++ b/src/helpers/StatsFormatHelper.h
@@ -14,7 +14,7 @@ public:
      board.getBattMilliVolts(),
      ms.getMillis() / 1000,
      err_flags,
-      mgr->getOutboundCount(0xFFFFFFFF)
+      mgr->getOutboundTotal()
    );
  }

--- a/src/helpers/sensors/MicroNMEALocationProvider.h
+++ b/src/helpers/sensors/MicroNMEALocationProvider.h
@@ -39,10 +39,13 @@ class MicroNMEALocationProvider : public LocationProvider {
    mesh::RTCClock* _clock;
    Stream* _gps_serial;
    RefCountedDigitalPin* _peripher_power;
+    int8_t _claims = 0;
    int _pin_reset;
    int _pin_en;
    long next_check = 0;
    long time_valid = 0;
+    unsigned long _last_time_sync = 0;
+    static const unsigned long TIME_SYNC_INTERVAL = 1800000; // Re-sync every 30 minutes

 public :
    MicroNMEALocationProvider(Stream& ser, mesh::RTCClock* clock = NULL, int pin_reset = GPS_RESET, int pin_en = GPS_EN,RefCountedDigitalPin* peripher_power=NULL) :
@@ -57,8 +60,21 @@ public :
        }
    }

+    void claim() {
+        _claims++;
+        if (_claims > 0) {
+            if (_peripher_power) _peripher_power->claim();
+        }
+    }
+
+    void release() {
+        if (_claims == 0) return; // avoid negative _claims
+        _claims--;
+        if (_peripher_power) _peripher_power->release();
+    }
+
    void begin() override {
-        if (_peripher_power) _peripher_power->claim();
+        claim();
        if (_pin_en != -1) {
            digitalWrite(_pin_en, PIN_GPS_EN_ACTIVE);
        }
@@ -82,7 +98,7 @@ public :
        if (_pin_reset != -1) {
            digitalWrite(_pin_reset, GPS_RESET_FORCE);
        }
-        if (_peripher_power) _peripher_power->release();
+        release();
    }

    bool isEnabled() override {
@@ -129,10 +145,15 @@ public :

        if (millis() > next_check) {
            next_check = millis() + 1000;
+            // Re-enable time sync periodically when GPS has valid fix
+            if (!_time_sync_needed && _clock != NULL && (millis() - _last_time_sync) > TIME_SYNC_INTERVAL) {
+                _time_sync_needed = true;
+            }
            if (_time_sync_needed && time_valid > 2) {
                if (_clock != NULL) {
                    _clock->setCurrentTime(getTimestamp());
                    _time_sync_needed = false;
+                    _last_time_sync = millis();
                }
            }
            if (isValid()) {
--- a/variants/heltec_mesh_solar/target.cpp
+++ b/variants/heltec_mesh_solar/target.cpp
@@ -11,7 +11,7 @@ WRAPPER_CLASS radio_driver(radio, board);

 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 SolarSensorManager sensors = SolarSensorManager(nmea);

 #ifdef DISPLAY_CLASS
--- a/variants/heltec_t114/variant.h
+++ b/variants/heltec_t114/variant.h
@@ -32,7 +32,7 @@

 // Power management boot protection threshold (millivolts)
 // Set to 0 to disable boot protection
-#define PWRMGT_VOLTAGE_BOOTLOCK 3300   // Won't boot below this voltage (mV)
+#define PWRMGT_VOLTAGE_BOOTLOCK 0   // Won't boot below this voltage (mV)
 // LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
 // AIN2 = P0.04 = BATTERY_PIN / PIN_VBAT_READ
 #define PWRMGT_LPCOMP_AIN 2
--- a/variants/heltec_tracker_v2/HeltecTrackerV2Board.cpp
+++ b/variants/heltec_tracker_v2/HeltecTrackerV2Board.cpp
@@ -6,19 +6,7 @@ void HeltecTrackerV2Board::begin() {
    pinMode(PIN_ADC_CTRL, OUTPUT);
    digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive

-    // Set up digital GPIO registers before releasing RTC hold. The hold latches
-    // the pad state including function select, so register writes accumulate
-    // without affecting the pad. On hold release, all changes apply atomically
-    // (IO MUX switches to digital GPIO with output already HIGH — no glitch).
-    pinMode(P_LORA_PA_POWER, OUTPUT);
-    digitalWrite(P_LORA_PA_POWER,HIGH);
-    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
-
-    pinMode(P_LORA_PA_EN, OUTPUT);
-    digitalWrite(P_LORA_PA_EN,HIGH);
-    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
-    pinMode(P_LORA_PA_TX_EN, OUTPUT);
-    digitalWrite(P_LORA_PA_TX_EN,LOW);
+    loRaFEMControl.init();

    esp_reset_reason_t reason = esp_reset_reason();
    if (reason != ESP_RST_DEEPSLEEP) {
@@ -39,12 +27,12 @@ void HeltecTrackerV2Board::begin() {

  void HeltecTrackerV2Board::onBeforeTransmit(void) {
    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
-    digitalWrite(P_LORA_PA_TX_EN,HIGH);
+    loRaFEMControl.setTxModeEnable();
  }

  void HeltecTrackerV2Board::onAfterTransmit(void) {
    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
-    digitalWrite(P_LORA_PA_TX_EN,LOW);
+    loRaFEMControl.setRxModeEnable();
  }

  void HeltecTrackerV2Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
@@ -56,9 +44,7 @@ void HeltecTrackerV2Board::begin() {

    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);

-    // Hold GC1109 FEM pins during sleep to keep LNA active for RX wake
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN);
+    loRaFEMControl.setRxModeEnableWhenMCUSleep();//It also needs to be enabled in receive mode

    if (pin_wake_btn < 0) {
      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
--- a/variants/heltec_tracker_v2/HeltecTrackerV2Board.h
+++ b/variants/heltec_tracker_v2/HeltecTrackerV2Board.h
@@ -4,11 +4,13 @@
 #include <helpers/RefCountedDigitalPin.h>
 #include <helpers/ESP32Board.h>
 #include <driver/rtc_io.h>
+#include "LoRaFEMControl.h"

 class HeltecTrackerV2Board : public ESP32Board {

 public:
  RefCountedDigitalPin periph_power;
+  LoRaFEMControl loRaFEMControl;

  HeltecTrackerV2Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }

--- a/variants/heltec_tracker_v2/LoRaFEMControl.cpp
+++ b/variants/heltec_tracker_v2/LoRaFEMControl.cpp
@@ -0,0 +1,58 @@
+#include "LoRaFEMControl.h"
+#include <driver/rtc_io.h>
+#include <esp_sleep.h>
+#include <Arduino.h>
+
+void LoRaFEMControl::init(void)
+{
+    pinMode(P_LORA_PA_POWER, OUTPUT);
+    digitalWrite(P_LORA_PA_POWER, HIGH);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_KCT8103L_PA_CSD);
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_KCT8103L_PA_CTX);
+    delay(1);
+    pinMode(P_LORA_KCT8103L_PA_CSD, OUTPUT);
+    digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
+    pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT);
+    digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
+    setLnaCanControl(true);
+}
+
+void LoRaFEMControl::setSleepModeEnable(void)
+{
+    // shutdown the PA
+    digitalWrite(P_LORA_KCT8103L_PA_CSD, LOW);
+}
+
+void LoRaFEMControl::setTxModeEnable(void)
+{
+    digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
+    digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
+}
+
+void LoRaFEMControl::setRxModeEnable(void)
+{
+    digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
+    if (lna_enabled) {
+        digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW);
+    } else {
+        digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
+    }
+}
+
+void LoRaFEMControl::setRxModeEnableWhenMCUSleep(void)
+{
+    digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CSD);
+    if (lna_enabled) {
+        digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW);
+    } else {
+        digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
+    }
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CTX);
+}
+
+void LoRaFEMControl::setLNAEnable(bool enabled)
+{
+    lna_enabled = enabled;
+}
--- a/variants/heltec_tracker_v2/LoRaFEMControl.h
+++ b/variants/heltec_tracker_v2/LoRaFEMControl.h
@@ -0,0 +1,21 @@
+#pragma once
+#include <stdint.h>
+
+class LoRaFEMControl
+{
+  public:
+    LoRaFEMControl() {}
+    virtual ~LoRaFEMControl() {}
+    void init(void);
+    void setSleepModeEnable(void);
+    void setTxModeEnable(void);
+    void setRxModeEnable(void);
+    void setRxModeEnableWhenMCUSleep(void);
+    void setLNAEnable(bool enabled);
+    bool isLnaCanControl(void) { return lna_can_control; }
+    void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
+
+  private:
+    bool lna_enabled = false;
+    bool lna_can_control = false;
+};
--- a/variants/heltec_tracker_v2/platformio.ini
+++ b/variants/heltec_tracker_v2/platformio.ini
@@ -17,18 +17,18 @@ build_flags =
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
-  -D P_LORA_PA_POWER=7   ; VFEM_Ctrl - GC1109 LDO power enable
-  -D P_LORA_PA_EN=4      ; CSD - GC1109 chip enable (HIGH=on)
-  -D P_LORA_PA_TX_EN=46  ; CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-  -D LORA_TX_POWER=10    ; 10dBm + ~11dB GC1109 gain = ~21dBm output
+  -D P_LORA_PA_POWER=7  ;VFEM_Ctrl -LDO power enable
+  -D P_LORA_KCT8103L_PA_CSD=4
+  -D P_LORA_KCT8103L_PA_CTX=5
+  -D LORA_TX_POWER=9    ; 9dBm + ~13dB KCT8103L gain = ~22dBm output
  -D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D SX126X_REGISTER_PATCH=1
-  -D PIN_BOARD_SDA=5
-  -D PIN_BOARD_SCL=6
+  -D PIN_BOARD_SDA=6
+  -D PIN_BOARD_SCL=17
  -D PIN_USER_BTN=0
  -D PIN_TFT_SDA=42   ; SDIN
  -D PIN_TFT_SCL=41   ; SCLK
@@ -207,8 +207,6 @@ build_flags =
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
-  -D ENV_PIN_SDA=3
-  -D ENV_PIN_SCL=4
  -D DISPLAY_CLASS=ST7735Display
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
--- a/variants/heltec_tracker_v2/target.cpp
+++ b/variants/heltec_tracker_v2/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, NULL, GPS_RESET, GPS_EN, &board.periph_power);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN, &board.periph_power);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/heltec_v3/target.cpp
+++ b/variants/heltec_v3/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/heltec_v4/target.cpp
+++ b/variants/heltec_v4/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/keepteen_lt1/target.cpp
+++ b/variants/keepteen_lt1/target.cpp
@@ -12,7 +12,7 @@ VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/lilygo_tbeam_1w/target.cpp
+++ b/variants/lilygo_tbeam_1w/target.cpp
@@ -19,7 +19,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/lilygo_tbeam_SX1262/target.cpp
+++ b/variants/lilygo_tbeam_SX1262/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/lilygo_tbeam_SX1276/target.cpp
+++ b/variants/lilygo_tbeam_SX1276/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/lilygo_tbeam_supreme_SX1262/target.cpp
+++ b/variants/lilygo_tbeam_supreme_SX1262/target.cpp
@@ -19,7 +19,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/meshadventurer/target.cpp
+++ b/variants/meshadventurer/target.cpp
@@ -11,7 +11,7 @@ WRAPPER_CLASS radio_driver(radio, board);

 ESP32RTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 MASensorManager sensors = MASensorManager(nmea);

 #ifdef DISPLAY_CLASS
--- a/variants/nano_g2_ultra/target.cpp
+++ b/variants/nano_g2_ultra/target.cpp
@@ -12,7 +12,7 @@ WRAPPER_CLASS radio_driver(radio, board);

 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 NanoG2UltraSensorManager sensors = NanoG2UltraSensorManager(nmea);

 #ifdef DISPLAY_CLASS
--- a/variants/promicro/target.cpp
+++ b/variants/promicro/target.cpp
@@ -12,7 +12,7 @@ VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/rak3112/target.cpp
+++ b/variants/rak3112/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/rak3401/target.cpp
+++ b/variants/rak3401/target.cpp
@@ -26,7 +26,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/rak4631/target.cpp
+++ b/variants/rak4631/target.cpp
@@ -26,7 +26,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/rak_wismesh_tag/target.cpp
+++ b/variants/rak_wismesh_tag/target.cpp
@@ -22,7 +22,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/sensecap_solar/platformio.ini
+++ b/variants/sensecap_solar/platformio.ini
@@ -8,7 +8,6 @@ build_flags = ${nrf52_base.build_flags}
  -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
  -I variants/sensecap_solar
  -I src/helpers/nrf52
-  -UENV_INCLUDE_GPS
  -D NRF52_PLATFORM=1
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
@@ -24,6 +23,7 @@ build_flags = ${nrf52_base.build_flags}
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
+  -D ENV_INCLUDE_GPS=1
 build_src_filter = ${nrf52_base.build_src_filter}
  +<helpers/*.cpp>
  +<helpers/sensors>
--- a/variants/sensecap_solar/target.cpp
+++ b/variants/sensecap_solar/target.cpp
@@ -1,7 +1,9 @@
 #include <Arduino.h>
 #include "target.h"
 #include <helpers/ArduinoHelpers.h>
-
+#ifdef ENV_INCLUDE_GPS
+#include <helpers/sensors/MicroNMEALocationProvider.h>
+#endif
 SenseCapSolarBoard board;

 RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
@@ -10,7 +12,12 @@ WRAPPER_CLASS radio_driver(radio, board);

 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-EnvironmentSensorManager sensors;
+#ifdef ENV_INCLUDE_GPS
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+EnvironmentSensorManager sensors = EnvironmentSensorManager();
+#endif

 bool radio_init() {
    rtc_clock.begin(Wire);
--- a/variants/sensecap_solar/variant.cpp
+++ b/variants/sensecap_solar/variant.cpp
@@ -18,8 +18,8 @@ const uint32_t g_ADigitalPinMap[] = {
    47, // D10 P1.15 (SPI_MOSI) LORA_MOSI

    // D11-D12 - LED outputs
-    15, // D11 P0.15 User LED
-    19, // D12 P0.19 Breathing LED
+    15, // D11 P0.15 User LED (White LED)
+    19, // D12 P0.19 Breathing LED (Blue LED - LoRa TX)

    // D13 - User input
    33, // D13 P1.01 User Button
@@ -58,14 +58,9 @@ void initVariant() {
    pinMode(PIN_QSPI_CS, OUTPUT);
    digitalWrite(PIN_QSPI_CS, HIGH);

-    pinMode(LED_GREEN, OUTPUT);
-    digitalWrite(LED_GREEN, LOW);
+    pinMode(LED_WHITE, OUTPUT);
+    digitalWrite(LED_WHITE, LOW);

    pinMode(LED_BLUE, OUTPUT);
    digitalWrite(LED_BLUE, LOW);
-
-    /* disable gps until we actually support it.
-    pinMode(GPS_EN, OUTPUT);
-    digitalWrite(GPS_EN, HIGH);
-    */
 }
--- a/variants/sensecap_solar/variant.h
+++ b/variants/sensecap_solar/variant.h
@@ -24,8 +24,8 @@
 #define LED_BUILTIN             (PIN_LED)

 #define LED_RED                 (PINS_COUNT)
-#define LED_GREEN               (12)
-#define LED_BLUE                (11)
+#define LED_WHITE               (11)
+#define LED_BLUE                (12)    // LoRa TX indicator

 #define LED_STATE_ON            (1)     // State when LED is litted

--- a/variants/t1000-e/t1000e_sensors.cpp
+++ b/variants/t1000-e/t1000e_sensors.cpp
@@ -21,7 +21,7 @@ static unsigned int ntc_res2[136] = {
  1081,   1053,   1026,   999,   974,   949,   925,   902,   880,   858,
 };

-static char ntc_temp2[136] = {
+static int8_t ntc_temp2[136] = {
  -30, -29, -28, -27, -26, -25, -24, -23, -22, -21, -20, -19, -18, -17, -16, -15, -14, -13, -12, -11,
  -10, -9,  -8,  -7,  -6,  -5,  -4,  -3,  -2,  -1,  0,   1,   2,   3,   4,   5,   6,   7,   8,   9,
  10,  11,  12,  13,  14,  15,  16,  17,  18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,
--- a/variants/thinknode_m3/target.cpp
+++ b/variants/thinknode_m3/target.cpp
@@ -11,7 +11,7 @@ WRAPPER_CLASS radio_driver(radio, board);
 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #ifdef ENV_INCLUDE_GPS
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
 EnvironmentSensorManager sensors = EnvironmentSensorManager();
--- a/variants/xiao_c3/target.cpp
+++ b/variants/xiao_c3/target.cpp
@@ -17,7 +17,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
-  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
  EnvironmentSensorManager sensors;
--- a/variants/xiao_nrf52/variant.h
+++ b/variants/xiao_nrf52/variant.h
@@ -77,7 +77,7 @@ static const uint8_t D10 = 10;

 // Power management boot protection threshold (millivolts)
 // Set to 0 to disable boot protection
-#define PWRMGT_VOLTAGE_BOOTLOCK    3300   // Won't boot below this voltage
+#define PWRMGT_VOLTAGE_BOOTLOCK    0   // Won't boot below this voltage

 // LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
 #define PWRMGT_LPCOMP_AIN           7     // AIN7 = P0.31 = PIN_VBAT
Author	SHA1	Message	Date
Matthias Wientapper	e9f4b4abd2	rak4631, Xiao NRf, T114: set lockout voltage to 0V	2026-03-08 10:10:02 +01:00
Matthias Wientapper	4326069ba2	set default: disable flood adverts	2026-03-08 10:10:02 +01:00
Matthias Wientapper	97aaa51cf3	Integration of upstrem PR #1810	2026-03-08 10:10:02 +01:00
Matthias Wientapper	8d0a4b944c	Integration of upstrem PR #1338	2026-03-08 10:10:01 +01:00
Matthias Wientapper	6b781b1e9c	Integration of upstrem PR #1297	2026-03-08 10:09:59 +01:00
Liam Cottle	c8e003f88d	Merge pull request #1960 from jbrazio/2026/devcontainer Update devcontainer config	2026-03-08 01:54:26 +13:00
João Brázio	88f2e35faa	devcontainer: add bun feature and update postCreateCommand	2026-03-07 12:49:25 +00:00
Liam Cottle	5ac8ab2a62	Merge pull request #1689 from aXistem-dev/feature/sensecap-led-fix sensecap_solar: Fixing LED definitions	2026-03-07 23:55:09 +13:00
Confi	5188221584	sensecap_solar: fix LED definitions (white=11, blue=12)	2026-03-07 09:59:30 +01:00
Liam Cottle	76524c703f	Merge pull request #1589 from marnick-hartgers/gps_sencecap_solar_p1 Added gps support for Sensecap p1 solar	2026-03-07 21:31:38 +13:00
ripplebiz	29be7e293c	Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression Fix countBefore regression: replace sentinel with getOutboundTotal()	2026-03-07 18:48:02 +11:00
Liam Cottle	aad56bb334	Merge pull request #1936 from Quency-D/dev-heltec-tracker-v2 Update Heltec Tracker v2 to version KCT8103L.	2026-03-07 17:59:19 +13:00
Liam Cottle	5dddb8a3a1	Merge pull request #1350 from weebl2000/sync-gps-time-30min Sync gps time every 30min	2026-03-07 17:11:07 +13:00
Liam Cottle	2a6325d8f8	Merge pull request #1915 from weebl2000/fix-incorrect-ram-flash-maximums Fix incorrect ram flash maximums (supersedes #765)	2026-03-07 16:52:39 +13:00
Liam Cottle	bd47d8d86b	Merge pull request #1391 from R6DJO/fix_t1000-e_temp T1000-E: Negative temperature values incorrectly displayed due to char signedness	2026-03-07 16:49:54 +13:00
Liam Cottle	ca476488bb	Merge pull request #1364 from weebl2000/pass-rtc_clock-to-locationprovider Pass rtc_clock to MicroNMEALocationProvider in all variants	2026-03-07 16:41:29 +13:00
Quency-D	7a8370fa69	Fixed a bug in the LORA_TX_POWER comment.	2026-03-06 16:04:47 +08:00
Quency-D	cdca79540f	Update Heltec Tracker v2 to version KCT8103L.	2026-03-06 14:19:07 +08:00
Quency-D	14db7d43cc	Merge pull request #7 from meshcore-dev/dev merge Dev	2026-03-06 11:27:47 +08:00
Wessel Nieboer	60b76f56d9	update PR #765	2026-03-04 03:38:35 +01:00
Wessel Nieboer	801ed6bb0a	Merge remote-tracking branch 'origin/dev' into fix-incorrect-ram-flash-maximums	2026-03-04 03:37:01 +01:00
Wessel Nieboer	67d22401b1	Pass rtc_clock to all MicroNMEALocationProvider instances Enable GPS time synchronization across all variants by passing &rtc_clock to MicroNMEALocationProvider. When GPS gets a valid fix, the RTC clock is now updated automatically every 30 minutes. Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag, lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1, lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3, promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.	2026-03-03 15:45:07 +01:00
Wessel Nieboer	10f2fecd45	Sync time with GPS every 30 minutes Unless your GPS is being spoofed there isn't really a downside to syncing more often with GPS. I understand the RTC is very stable, but especially with powersaving now clock drift is worse, we should sync more often.	2026-03-03 15:44:55 +01:00
Daniel Novak	0d87dcc989	Also fix countBefore(0xFFFFFFFF) to return _num The signed comparison in countBefore breaks for the max uint32_t value. Even though callers now use getOutboundTotal(), the function itself should be correct for all inputs.	2026-03-01 07:41:50 +01:00
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	2026-02-28 17:19:04 +01:00
Daniel Novak	c436bd42c5	Fix countBefore sentinel regression from millis wraparound fix PR #1795 changed PacketQueue::countBefore() to use signed 2's complement arithmetic for millis wraparound safety. However, this broke the 0xFFFFFFFF sentinel pattern used by callers to mean "count all packets regardless of schedule". With the signed comparison, countBefore(0xFFFFFFFF) always returns 0, causing hasPendingWork() to report false and repeaters to sleep with packets still queued. Stats reporting also shows queue_len as 0. Add an early-return for the sentinel value before the loop, and document the sentinel convention on the virtual interface and implementation.	2026-02-28 16:22:58 +01:00
Marnick Hartgers	0a66dee990	fixed build without ENV_INCLUDE_GPS	2026-02-06 00:12:22 +01:00
Marnick Hartgers	5120f9927a	Merge remote-tracking branch 'origin/dev' into gps_sencecap_solar_p1	2026-02-04 09:50:40 +01:00
Marnick Hartgers	46012f89e7	gps for sensecap p1 solar	2026-02-03 23:06:00 +01:00
Alexander aka R6DJO	0084d92239	Fix T1000-E negative temperature display bug The ntc_temp2 lookup table was declared as 'char', which can be unsigned on some platforms, causing negative temperature values (-30°C to -1°C) to be incorrectly interpreted. Changed to int8_t to ensure proper signed integer handling of negative temperatures. Fixes #1389 Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>	2026-01-14 09:30:20 +03:00
taco	119b8f29e6	add rak4631 board json	2025-09-10 00:05:14 +10:00
taco	52de2096ab	fix incorrect ram and flash sizes in board jsons	2025-09-09 17:38:10 +10:00