p_reichart
6599c53507
Some checks failed
Build and deploy Docs site to GitHub Pages / github-pages (push) Has been cancelled
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
15 lines
521 B
Markdown
15 lines
521 B
Markdown
# Meshcore EVO - AOI Edition
|
|
|
|
Diese Firmware wurde verändert:
|
|
|
|
* Modifikation der Sensor-Firmware
|
|
* Gestestet mit Heltec V4
|
|
* Sollte theoretisch mit allen ESP-Boards funktionieren
|
|
|
|
### Neue Befehle:
|
|
|
|
* "io" gibt den zustand aller 32 GPIO-Pins als Hexcode aus. (Die originale FW gibt eine festcodierte 0 aus.)
|
|
* "bin" gibt den zustand aller 32 GPIO-Pins als Binärcode aus
|
|
* "readpin <pin>" gibt den zustand eines Pins als ON/OFF aus
|
|
* GPIO15 ist als Pullup-Eingang definiert (Offen: ON, Nach Masse kurzgeschlossen: OFF)
|