163 lines
5.7 KiB
Markdown
163 lines
5.7 KiB
Markdown
# MeshCore KISS Modem Protocol
|
||
|
||
Serial protocol for the KISS modem firmware. Enables sending/receiving MeshCore packets over LoRa and cryptographic operations using the modem's identity.
|
||
|
||
## Serial Configuration
|
||
|
||
115200 baud, 8N1, no flow control.
|
||
|
||
## Frame Format
|
||
|
||
Standard KISS framing with byte stuffing.
|
||
|
||
| Byte | Name | Description |
|
||
|------|------|-------------|
|
||
| `0xC0` | FEND | Frame delimiter |
|
||
| `0xDB` | FESC | Escape character |
|
||
| `0xDC` | TFEND | Escaped FEND (FESC + TFEND = 0xC0) |
|
||
| `0xDD` | TFESC | Escaped FESC (FESC + TFESC = 0xDB) |
|
||
|
||
```
|
||
┌──────┬─────────┬──────────────┬──────┐
|
||
│ FEND │ Command │ Data (escaped)│ FEND │
|
||
│ 0xC0 │ 1 byte │ 0-510 bytes │ 0xC0 │
|
||
└──────┴─────────┴──────────────┴──────┘
|
||
```
|
||
|
||
Maximum unescaped frame size: 512 bytes.
|
||
|
||
## Commands
|
||
|
||
### Request Commands (Host → Modem)
|
||
|
||
| Command | Value | Data |
|
||
|---------|-------|------|
|
||
| `CMD_DATA` | `0x00` | Packet (2-255 bytes) |
|
||
| `CMD_GET_IDENTITY` | `0x01` | - |
|
||
| `CMD_GET_RANDOM` | `0x02` | Length (1 byte, 1-64) |
|
||
| `CMD_VERIFY_SIGNATURE` | `0x03` | PubKey (32) + Signature (64) + Data |
|
||
| `CMD_SIGN_DATA` | `0x04` | Data to sign |
|
||
| `CMD_ENCRYPT_DATA` | `0x05` | Key (32) + Plaintext |
|
||
| `CMD_DECRYPT_DATA` | `0x06` | Key (32) + MAC (2) + Ciphertext |
|
||
| `CMD_KEY_EXCHANGE` | `0x07` | Remote PubKey (32) |
|
||
| `CMD_HASH` | `0x08` | Data to hash |
|
||
| `CMD_SET_RADIO` | `0x09` | Freq (4) + BW (4) + SF (1) + CR (1) |
|
||
| `CMD_SET_TX_POWER` | `0x0A` | Power dBm (1) |
|
||
| *reserved* | `0x0B` | *(not implemented)* |
|
||
| `CMD_GET_RADIO` | `0x0C` | - |
|
||
| `CMD_GET_TX_POWER` | `0x0D` | - |
|
||
| *reserved* | `0x0E` | *(not implemented)* |
|
||
| `CMD_GET_VERSION` | `0x0F` | - |
|
||
| `CMD_GET_CURRENT_RSSI` | `0x10` | - |
|
||
| `CMD_IS_CHANNEL_BUSY` | `0x11` | - |
|
||
| `CMD_GET_AIRTIME` | `0x12` | Packet length (1) |
|
||
| `CMD_GET_NOISE_FLOOR` | `0x13` | - |
|
||
| `CMD_GET_STATS` | `0x14` | - |
|
||
| `CMD_GET_BATTERY` | `0x15` | - |
|
||
| `CMD_PING` | `0x16` | - |
|
||
| `CMD_GET_SENSORS` | `0x17` | Permissions (1) |
|
||
|
||
### Response Commands (Modem → Host)
|
||
|
||
| Command | Value | Data |
|
||
|---------|-------|------|
|
||
| `CMD_DATA` | `0x00` | SNR (1) + RSSI (1) + Packet |
|
||
| `RESP_IDENTITY` | `0x21` | PubKey (32) |
|
||
| `RESP_RANDOM` | `0x22` | Random bytes (1-64) |
|
||
| `RESP_VERIFY` | `0x23` | Result (1): 0x00=invalid, 0x01=valid |
|
||
| `RESP_SIGNATURE` | `0x24` | Signature (64) |
|
||
| `RESP_ENCRYPTED` | `0x25` | MAC (2) + Ciphertext |
|
||
| `RESP_DECRYPTED` | `0x26` | Plaintext |
|
||
| `RESP_SHARED_SECRET` | `0x27` | Shared secret (32) |
|
||
| `RESP_HASH` | `0x28` | SHA-256 hash (32) |
|
||
| `RESP_OK` | `0x29` | - |
|
||
| `RESP_RADIO` | `0x2A` | Freq (4) + BW (4) + SF (1) + CR (1) |
|
||
| `RESP_TX_POWER` | `0x2B` | Power dBm (1) |
|
||
| *reserved* | `0x2C` | *(not implemented)* |
|
||
| `RESP_VERSION` | `0x2D` | Version (1) + Reserved (1) |
|
||
| `RESP_ERROR` | `0x2E` | Error code (1) |
|
||
| `RESP_TX_DONE` | `0x2F` | Result (1): 0x00=failed, 0x01=success |
|
||
| `RESP_CURRENT_RSSI` | `0x30` | RSSI dBm (1, signed) |
|
||
| `RESP_CHANNEL_BUSY` | `0x31` | Result (1): 0x00=clear, 0x01=busy |
|
||
| `RESP_AIRTIME` | `0x32` | Milliseconds (4) |
|
||
| `RESP_NOISE_FLOOR` | `0x33` | dBm (2, signed) |
|
||
| `RESP_STATS` | `0x34` | RX (4) + TX (4) + Errors (4) |
|
||
| `RESP_BATTERY` | `0x35` | Millivolts (2) |
|
||
| `RESP_PONG` | `0x36` | - |
|
||
| `RESP_SENSORS` | `0x37` | CayenneLPP payload |
|
||
|
||
## Error Codes
|
||
|
||
| Code | Value | Description |
|
||
|------|-------|-------------|
|
||
| `ERR_INVALID_LENGTH` | `0x01` | Request data too short |
|
||
| `ERR_INVALID_PARAM` | `0x02` | Invalid parameter value |
|
||
| `ERR_NO_CALLBACK` | `0x03` | Feature not available |
|
||
| `ERR_MAC_FAILED` | `0x04` | MAC verification failed |
|
||
| `ERR_UNKNOWN_CMD` | `0x05` | Unknown command |
|
||
| `ERR_ENCRYPT_FAILED` | `0x06` | Encryption failed |
|
||
| `ERR_TX_PENDING` | `0x07` | TX already pending |
|
||
|
||
## Data Formats
|
||
|
||
### Radio Parameters (CMD_SET_RADIO / RESP_RADIO)
|
||
|
||
All values little-endian.
|
||
|
||
| Field | Size | Description |
|
||
|-------|------|-------------|
|
||
| Frequency | 4 bytes | Hz (e.g., 869618000) |
|
||
| Bandwidth | 4 bytes | Hz (e.g., 62500) |
|
||
| SF | 1 byte | Spreading factor (5-12) |
|
||
| CR | 1 byte | Coding rate (5-8) |
|
||
|
||
### Received Packet (CMD_DATA response)
|
||
|
||
| Field | Size | Description |
|
||
|-------|------|-------------|
|
||
| SNR | 1 byte | Signal-to-noise × 4, signed |
|
||
| RSSI | 1 byte | Signal strength dBm, signed |
|
||
| Packet | variable | Raw MeshCore packet |
|
||
|
||
### Noise Floor (RESP_NOISE_FLOOR)
|
||
|
||
Response to `CMD_GET_NOISE_FLOOR` (0x13). Little-endian.
|
||
|
||
| Field | Size | Description |
|
||
|--------------|------|--------------------------------|
|
||
| Noise floor | 2 | int16_t, dBm (signed), e.g. -120 |
|
||
|
||
The modem recalibrates the noise floor every two seconds with an AGC reset every 30 seconds.
|
||
|
||
### Stats (RESP_STATS)
|
||
|
||
Response to `CMD_GET_STATS` (0x14). All values little-endian.
|
||
|
||
| Field | Size | Description |
|
||
|-------|------|-------------|
|
||
| RX | 4 bytes | Packets received |
|
||
| TX | 4 bytes | Packets transmitted |
|
||
| Errors | 4 bytes | Receive errors |
|
||
|
||
### Sensor Permissions (CMD_GET_SENSORS)
|
||
|
||
| Bit | Value | Description |
|
||
|-----|-------|-------------|
|
||
| 0 | `0x01` | Base (battery) |
|
||
| 1 | `0x02` | Location (GPS) |
|
||
| 2 | `0x04` | Environment (temp, humidity, pressure) |
|
||
|
||
Use `0x07` for all permissions.
|
||
|
||
### Sensor Data (RESP_SENSORS)
|
||
|
||
Data returned in CayenneLPP format. See [CayenneLPP documentation](https://docs.mydevices.com/docs/lorawan/cayenne-lpp) for parsing.
|
||
|
||
## Notes
|
||
|
||
- Modem generates identity on first boot (stored in flash)
|
||
- SNR values multiplied by 4 for 0.25 dB precision
|
||
- Wait for `RESP_TX_DONE` before sending next packet
|
||
- Sending `CMD_DATA` while TX is pending returns `ERR_TX_PENDING`
|
||
- See [packet_structure.md](./packet_structure.md) for packet format
|