Files
MeshCore-Solo/examples/companion_radio/NodePrefs.h

183 lines
9.5 KiB
C
Raw Normal View History

2025-06-01 09:25:17 -07:00
#pragma once
#include <cstdint>
#include <stdio.h>
#define TELEM_MODE_DENY 0
#define TELEM_MODE_ALLOW_FLAGS 1 // use contact.flags
#define TELEM_MODE_ALLOW_ALL 2
#define ADVERT_LOC_NONE 0
#define ADVERT_LOC_SHARE 1
struct NodePrefs { // persisted to file
float airtime_factor;
char node_name[32];
float freq;
uint8_t sf;
uint8_t cr;
uint8_t multi_acks;
uint8_t manual_add_contacts;
float bw;
int8_t tx_power_dbm;
uint8_t telemetry_mode_base;
uint8_t telemetry_mode_loc;
uint8_t telemetry_mode_env;
float rx_delay_base;
uint32_t ble_pin;
uint8_t advert_loc_policy;
uint8_t buzzer_quiet;
uint8_t buzzer_volume; // 0=min..4=max, default 4
uint8_t gps_enabled; // GPS enabled flag (0=disabled, 1=enabled)
uint32_t gps_interval; // GPS read interval in seconds
uint8_t autoadd_config; // bitmask for auto-add contacts config
uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
2026-02-14 15:50:06 +11:00
uint8_t client_repeat;
uint8_t path_hash_mode; // which path mode to use when sending
uint8_t autoadd_max_hops; // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
char default_scope_name[31];
uint8_t default_scope_key[16];
uint8_t display_brightness; // 0=min..4=max, default 2 (medium)
uint16_t auto_off_secs; // display auto-off: 0=never, else seconds (default 15)
uint8_t auto_lock; // 0=disabled, 1=lock screen when display turns off
int8_t tz_offset_hours; // timezone offset from UTC, -12..+14 (default 0)
uint16_t low_batt_mv; // auto-shutdown threshold: 0=disabled, 3000-3500 mV
uint8_t batt_display_mode; // 0=icon, 1=percent, 2=voltage
char custom_msgs[10][140]; // user-defined quick messages (supports {loc}, {time})
uint64_t ch_notif_override; // bitmask: bit i = channel i has explicit notification setting
uint64_t ch_notif_muted; // bitmask: bit i = channel i muted (only if override bit set)
uint8_t dm_show_all; // 0=favourites only (default), 1=all chat contacts
uint8_t room_fav_only; // 0=all room servers (default), 1=favourites only
uint8_t ringtone_bpm_idx; // index into {60,90,120,150,180}
uint8_t ringtone_len; // number of notes in custom ringtone (0 = use default)
uint8_t ringtone_notes[32]; // packed: bits0-2=pitch, bits3-4=octave-4, bits5-6=dur_idx
uint16_t home_pages_mask; // bitmask of visible home pages (bit0=Clock..bit8=Shutdown); 0=all visible
uint8_t bot_enabled; // 0=disabled, 1=DM bot active (responds to all DMs)
uint8_t bot_channel_enabled; // 0=disabled, 1=channel bot active for bot_channel_idx
uint8_t bot_channel_idx; // channel index for channel bot
char bot_trigger[64]; // trigger phrase (case-insensitive contains match)
char bot_reply_dm[140]; // auto-reply text for DM
char bot_reply_ch[140]; // auto-reply text for channel
uint8_t clock_hide_seconds; // 0=show HH:MM:SS/refresh 1s (default), 1=hide/refresh 60s
uint8_t clock_12h; // 0=24h (default), 1=12h with AM/PM
uint8_t buzzer_auto; // 0=manual (default), 1=auto-mute when BT connected
struct DmNotifEntry { uint8_t prefix[4]; uint8_t state; }; // state: 0=default,1=muted,2=force-on
static const int DM_NOTIF_TABLE_MAX = 16;
DmNotifEntry dm_notif[DM_NOTIF_TABLE_MAX]; // 16*5 = 80 bytes
uint8_t dashboard_fields[3]; // 0=None,1=Batt V,2=Temp,3=Hum,4=Pres,5=GPS,6=Alt,7=Lux,8=CO2,9=Nodes,10=Msgs,11=Batt %
uint32_t advert_auto_interval_sec; // periodic 0-hop advert with GPS: 0=off, else seconds
// Second melody slot (same packing as ringtone_*)
uint8_t ringtone2_bpm_idx;
uint8_t ringtone2_len;
uint8_t ringtone2_notes[32];
// Global melody for notifications: 0=built-in, 1=melody1, 2=melody2
uint8_t notif_melody_dm;
uint8_t notif_melody_ch;
// Per-channel melody override (2 bitmasks, 1 bit per channel)
uint64_t ch_notif_melody_set; // bit i = channel i has explicit melody
uint64_t ch_notif_melody_2; // bit i = use melody 2 (else melody 1, when set bit is set)
// Per-DM melody table
struct DmMelodyEntry { uint8_t prefix[4]; uint8_t slot; }; // slot: 0=global,1=melody1,2=melody2
static const int DM_MELODY_TABLE_MAX = 16;
DmMelodyEntry dm_melody[DM_MELODY_TABLE_MAX];
uint8_t use_lemon_font; // 0=default Adafruit font, 1=Lemon font (Unicode, pixel-accurate wrap)
uint8_t display_rotation; // 0-3; only used on e-ink displays
// Home screen page order: each byte = HomePageBit + 1. 0 terminates the list.
// Validity gated by page_order_set magic (see below) — not by entry value range,
// so a junk byte in 1..HPB_COUNT cannot trigger custom-order mode.
// (Array length = HPB_COUNT, declared as literal so the field offset is stable
// across builds that add new HomePageBit entries.)
uint8_t page_order[11];
uint8_t joystick_rotation; // 0-3 steps CW; independent of display_rotation
uint8_t eink_full_refresh_every; // index into {0,5,10,20,30}: full refresh every N partials (0=off)
uint8_t page_order_set; // 0xA5 = page_order is user-configured; anything else = use default
static const uint8_t PAGE_ORDER_MAGIC = 0xA5;
feat(ui): Favourites home page (phase 1: storage + read-only grid) New home page rendering 6 pinned-contact slots. Grid transposes to orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to page navigation. Selected tile inverts via drawSelectionRow, filled tile shows contact name + unread badge, empty tile shows "+". Storage: - NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot, all-zero = empty; collision probability with a real key is 2^-48) - HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new HP_FAVOURITES mask bit so the page is toggleable in Settings - New PAGE_ORDER_LEN constant decouples the persisted array length (11) from the page-type count; loops over page_order now use it, value-range checks still use HPB_COUNT - homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly treated as toggleable - Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the fallback "missing pages" append (still reachable, lands at end) Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and savePrefs read/write the new field. Older saves leave the field zero-initialised (all slots empty), which is the natural starting state. Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot mini picker) wire interactions; this commit handles render + nav only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-24 23:00:27 +02:00
// Favourites dial: 6 pinned contacts, stored as first 6 bytes of pub_key per slot.
// All-zero = empty slot (probability a real pub_key starts with 6 zero bytes is 2^-48).
// Layout transposes between landscape (3×2) and portrait (2×3).
static const uint8_t FAVOURITES_COUNT = 6;
static const uint8_t FAVOURITE_PREFIX_LEN = 6;
uint8_t favourite_contacts[FAVOURITES_COUNT][FAVOURITE_PREFIX_LEN];
// GPS trail cadence. Logging on/off is a runtime state (Tools Trail),
// not a persisted preference.
uint8_t trail_interval_idx; // reserved — sampling cadence is now fixed at TrailStore::SAMPLING_SECS
uint8_t trail_min_delta_idx; // indexes TrailStore::minDeltaMeters (5/10/25/100 m)
uint8_t trail_units_idx; // indexes TrailStore::unitLabel (km/h, mph, min/km, min/mi)
2026-05-25 08:22:12 +02:00
uint64_t ch_fav_bitmask; // bit i = channel i is marked as favourite
uint8_t ch_fav_only; // 0=show all channels (default), 1=show favourites only
// Tail sentinel written at the end of /new_prefs. Bump the low byte when
// adding/removing/reordering fields in DataStore::savePrefs/loadPrefsInt so
// older saves are detected on load and skipped (zero-init defaults kept).
// High 24 bits identify the file format; low byte is the schema revision.
static const uint32_t SCHEMA_SENTINEL = 0xC0DE0005;
// Bit-index for each home page. Used by page_order (entries store bit+1) and
// by home_pages_mask. Single source of truth — both HomeScreen::pageBit/bitToPage
// and SettingsScreen::homePageBitIndex route their per-enum lookups through these.
enum HomePageBit : uint8_t {
feat(ui): Favourites home page (phase 1: storage + read-only grid) New home page rendering 6 pinned-contact slots. Grid transposes to orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to page navigation. Selected tile inverts via drawSelectionRow, filled tile shows contact name + unread badge, empty tile shows "+". Storage: - NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot, all-zero = empty; collision probability with a real key is 2^-48) - HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new HP_FAVOURITES mask bit so the page is toggleable in Settings - New PAGE_ORDER_LEN constant decouples the persisted array length (11) from the page-type count; loops over page_order now use it, value-range checks still use HPB_COUNT - homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly treated as toggleable - Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the fallback "missing pages" append (still reachable, lands at end) Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and savePrefs read/write the new field. Older saves leave the field zero-initialised (all slots empty), which is the natural starting state. Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot mini picker) wire interactions; this commit handles render + nav only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-24 23:00:27 +02:00
HPB_CLOCK = 0,
HPB_RECENT = 1,
HPB_RADIO = 2,
HPB_BLUETOOTH = 3,
HPB_ADVERT = 4,
HPB_GPS = 5,
HPB_SENSORS = 6,
HPB_TOOLS = 7,
HPB_SHUTDOWN = 8,
HPB_SETTINGS = 9,
HPB_QUICK_MSG = 10,
HPB_FAVOURITES = 11,
HPB_COUNT = 12,
};
feat(ui): Favourites home page (phase 1: storage + read-only grid) New home page rendering 6 pinned-contact slots. Grid transposes to orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to page navigation. Selected tile inverts via drawSelectionRow, filled tile shows contact name + unread badge, empty tile shows "+". Storage: - NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot, all-zero = empty; collision probability with a real key is 2^-48) - HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new HP_FAVOURITES mask bit so the page is toggleable in Settings - New PAGE_ORDER_LEN constant decouples the persisted array length (11) from the page-type count; loops over page_order now use it, value-range checks still use HPB_COUNT - homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly treated as toggleable - Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the fallback "missing pages" append (still reachable, lands at end) Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and savePrefs read/write the new field. Older saves leave the field zero-initialised (all slots empty), which is the natural starting state. Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot mini picker) wire interactions; this commit handles render + nav only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-24 23:00:27 +02:00
// Length of the persisted page_order[] array. Stable across firmware versions
// (don't grow without a schema migration). When HPB_COUNT exceeds this, extra
// visible pages are appended at navigation time via buildVisibleOrder fallback.
static const uint8_t PAGE_ORDER_LEN = 11;
// Bitmasks for home_pages_mask (bit=1 → page visible; 0 field = all visible).
// SETTINGS and QUICK_MSG have no mask bit — they're always visible.
feat(ui): Favourites home page (phase 1: storage + read-only grid) New home page rendering 6 pinned-contact slots. Grid transposes to orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to page navigation. Selected tile inverts via drawSelectionRow, filled tile shows contact name + unread badge, empty tile shows "+". Storage: - NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot, all-zero = empty; collision probability with a real key is 2^-48) - HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new HP_FAVOURITES mask bit so the page is toggleable in Settings - New PAGE_ORDER_LEN constant decouples the persisted array length (11) from the page-type count; loops over page_order now use it, value-range checks still use HPB_COUNT - homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly treated as toggleable - Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the fallback "missing pages" append (still reachable, lands at end) Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and savePrefs read/write the new field. Older saves leave the field zero-initialised (all slots empty), which is the natural starting state. Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot mini picker) wire interactions; this commit handles render + nav only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-24 23:00:27 +02:00
static const uint16_t HP_CLOCK = 1 << HPB_CLOCK;
static const uint16_t HP_RECENT = 1 << HPB_RECENT;
static const uint16_t HP_RADIO = 1 << HPB_RADIO;
static const uint16_t HP_BLUETOOTH = 1 << HPB_BLUETOOTH;
static const uint16_t HP_ADVERT = 1 << HPB_ADVERT;
static const uint16_t HP_GPS = 1 << HPB_GPS;
static const uint16_t HP_SENSORS = 1 << HPB_SENSORS;
static const uint16_t HP_TOOLS = 1 << HPB_TOOLS;
static const uint16_t HP_SHUTDOWN = 1 << HPB_SHUTDOWN;
static const uint16_t HP_FAVOURITES = 1 << HPB_FAVOURITES;
static const uint16_t HP_ALL = 0x01FF | HP_FAVOURITES;
// Label for home page by bit-index; returns "" for out-of-range.
// Array indices match HomePageBit values.
static const char* homePageLabel(uint8_t bit) {
static const char* labels[HPB_COUNT] = {
"Clock", "Recent", "Radio", "Bluetooth", "Advert",
feat(ui): Favourites home page (phase 1: storage + read-only grid) New home page rendering 6 pinned-contact slots. Grid transposes to orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to page navigation. Selected tile inverts via drawSelectionRow, filled tile shows contact name + unread badge, empty tile shows "+". Storage: - NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot, all-zero = empty; collision probability with a real key is 2^-48) - HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new HP_FAVOURITES mask bit so the page is toggleable in Settings - New PAGE_ORDER_LEN constant decouples the persisted array length (11) from the page-type count; loops over page_order now use it, value-range checks still use HPB_COUNT - homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly treated as toggleable - Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the fallback "missing pages" append (still reachable, lands at end) Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and savePrefs read/write the new field. Older saves leave the field zero-initialised (all slots empty), which is the natural starting state. Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot mini picker) wire interactions; this commit handles render + nav only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-24 23:00:27 +02:00
"GPS", "Sensors", "Tools", "Shutdown", "Settings", "Messages", "Favourites"
};
return (bit < HPB_COUNT) ? labels[bit] : "";
}
static void buildRTTTLString(const uint8_t* notes, uint8_t len, uint8_t bpm_idx,
char* buf, int size) {
static const uint16_t BPM_OPTS[] = { 60, 90, 120, 150, 180 };
static const uint8_t DUR_VALS[] = { 4, 8, 16, 32 };
static const char PITCHES[] = { 'p', 'c', 'd', 'e', 'f', 'g', 'a', 'b' };
if (len == 0) { buf[0] = '\0'; return; }
uint16_t bpm = BPM_OPTS[bpm_idx < 5 ? bpm_idx : 2];
int pos = snprintf(buf, size, "Ring:d=8,o=5,b=%u:", bpm);
for (int i = 0; i < len && pos < size - 8; i++) {
if (i > 0 && pos < size - 1) buf[pos++] = ',';
uint8_t pitch = notes[i] & 0x07;
uint8_t octave = ((notes[i] >> 3) & 0x03) + 4;
uint8_t dur_val = DUR_VALS[(notes[i] >> 5) & 0x03];
if (pitch == 0) pos += snprintf(buf + pos, size - pos, "%dp", dur_val);
else pos += snprintf(buf + pos, size - pos, "%d%c%d", dur_val, PITCHES[pitch], octave);
}
if (pos < size) buf[pos] = '\0';
}
2025-06-01 09:25:17 -07:00
};