Root cause of "settings don't survive a reboot": every screen that edits
NodePrefs (Settings, Bot, Trail, Locator, GPS sharing, etc.) only persisted
via its own savePrefsIfDirty(_dirty) call on its own Cancel/exit path.
UITask::shutdown() -- the one function behind every real power-off/reboot,
including the low-battery auto-shutdown that fires directly from
UITask::loop() regardless of which screen is on-screen -- never called
the_mesh.savePrefs() at all. A user who changed a setting and then hit any
of those paths without first explicitly backing out of the screen (e.g.
display auto-off mid-edit, then a low-battery auto-shutdown) silently lost
the change.
Also closes two direct board.reboot() bypasses that skipped shutdown()
entirely: the phone-app CMD_REBOOT command and the serial CLI "reboot"
command. The factory-reset reboot path is deliberately left alone -- it's
supposed to wipe everything.
Verified with a real regression test (not just "it compiles"): set a pref
in memory without flushing it, cross the real low_batt_mv threshold to
trigger the actual production low-battery-shutdown code path, then a real
page.reload(), then confirm behaviourally (does an incoming message wake
the screen or not) whether the setting survived. Temporarily reverted the
fix and re-ran to confirm the test actually fails without it (screen woke,
setting lost) before restoring it and confirming it passes.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two independent changes, requested together:
1. Settings > Sound > "Msg wake" (NodePrefs::msg_wake_screen_off,
0xC0DE002A) lets a user disable UITask::newMsg()'s existing behaviour
of turning the display on for an incoming message when it was off and
no companion app is connected. Stored inverted so both a fresh device
and an existing saved-prefs file default to "on" (today's behaviour).
New sim_test_set_msg_wake_disabled() hook verifies it without scripting
Settings navigation -- confirmed end to end via a real A<->R<->B mesh
in Playwright: message delivered while B's screen is off either wakes
it (enabled) or doesn't (disabled), checked via real canvas pixels.
2. A brand-new or factory-reset device now shows ALL home pages by
default instead of a curated 5-page carousel (MyMesh.cpp used to seed
home_pages_mask = HP_DEFAULT; now seeds 0, which every other read site
already treated as "all visible" -- HP_DEFAULT is now unused, removed).
Existing users' saved masks are untouched. New sim_test_get_home_pages_mask()
getter confirms a fresh instance reads back 0.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
(cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
network
- teach build_as_lib.py where SerialWifiInterface moved
arduino-pico's WiFi.begin() blocks for up to 2x its 15s timeout, which
stalled the mesh loop on every reconnect attempt; use beginNoBlock().
Log the IP when the link comes up, and the status code when retrying.
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
This commit aligns the clock to the left side of the screen and shows the title bar, excluding the node name (intentionally - I think it's a good idea to make a node harder to identify when locked ;) ).
TODO: I'm not sure if this clock alignment works on all display types, I only have a Wio Tracker L1 Pro OLED to test right now.
This commit
- adds LOCK to the HomePage enum
- moves the lock page code from loop() to the selected page handler
- adds a forward declaration for formatDashVal to make it callable from within the selected page handler
- adds a syncLockToHome function that triggers a (un)lock page switch
sim_buzzer_toggle_quiet()/sim_buzzer_get_quiet() (UITask.cpp) call the
literal UITask::toggleBuzzer() the real on-device Settings > Buzzer mute
toggle already calls -- persists into NodePrefs.buzzer_quiet, clears
buzzer_auto, saves prefs, shows the real "Buzzer: ON/OFF" alert. Not a
re-implementation, not a host-side Web Audio mute layered on top.
Every simple_repeater instance advertised the literal ADVERT_NAME
("repeater") -- across meshcore-solo-site's cross-visitor relay bridge
every hop in every path/relay list was an indistinguishable wall of
"repeater"s. A SIM_PLATFORM/__EMSCRIPTEN__-only default now picks a
random "<adjective> <geographic feature>" pair from
sim_instance_entropy() (real crypto.getRandomValues()-sourced entropy,
already used for RNG seeding) at first boot -- matches the real,
common ham-radio convention of naming a repeater after the hill it
sits on. Persists normally across reboots via the existing prefs
load/save path, same as a real operator-set name would.
sim_repeater_get_name() added alongside the existing
sim_repeater_get_relay_count() for host-page/test access to the
result.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.
Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
advert_interval defaulted to 1 (the field is minutes/2, so 2 minutes) --
too chatty for a repeater sitting on a desk being demoed/deployed. Field
only stores even minute counts, so 6 (value 3) is the closest step down
from "beeps too often" without landing under-target at 4.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
BaseChatMesh::bootstrapRTCfromContacts() called setCurrentTime(latest+1)
unconditionally. The newest contact's lastmod proves the clock must be at
*least* that late -- it says nothing about it being any earlier -- so on
any node that already has a better time source (a board with a real RTC,
or the Emscripten sim whose SimRTCClock is backed by the host's wall
clock) this dragged a correct clock backwards to whatever timestamp
happened to be persisted alongside the contact list. Measured in the
sim: ~9s behind real time after every reboot, growing with how long the
previous session ran.
Also adds sim_test_sync_time(epoch_secs) next to the other
SIM_PLATFORM/__EMSCRIPTEN__ test hooks, so a host page can re-anchor the
RTC on every (re)boot. The clock is live state the real mesh writes to at
runtime -- a peer whose own clock runs ahead pushes ours forward, which
is right on a node with no better source and, with meshcore-solo-site's
cross-visitor relay, means one skewed visitor can drag everyone. On a
demo running on someone's computer, "reset the device" should also mean
"the clock is correct again".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
meshcore-solo-site's new cross-visitor relay bridge (Phase 3) needs a way
to read a sim instance's live freq/bw/sf/cr so a WebSocket relay server
can fan traffic out only to other visitors tuned to the same params,
mirroring real LoRa channel isolation. Added sim_radio_get_params()
(examples/companion_radio/main.cpp), reading NodePrefs directly -- the
real live source of truth, since SimRadio::setParams() has always been a
complete no-op (accepts and discards its arguments). Out-params via
pointer, same buffer-pointer idiom sim_radio_poll_tx() already uses;
build_wasm.sh needed HEAPF32/HEAP32 added to EXPORTED_RUNTIME_METHODS so
JS can read them back.
While testing the relay bridge with two independent browser contexts, hit
a real bug: sim_instance_salt() (SimInstance.h) is a pure function of the
simInstanceTag STRING ('hero'/'B'/'R'), so it's only useful for telling
apart same-tab instances -- it's identical for two genuinely different
visitors who both boot a 'hero' instance. Combined with SimRNG::begin()'s
other seed ingredients -- time(NULL) (1-second resolution) and a WASM
heap pointer (no ASLR inside the sandbox, so it's fully deterministic
across independent boots of the same binary) -- two different visitors
landing on the same wall-clock second reliably generated byte-identical
Ed25519 identities (confirmed: two fresh browser contexts launched
together produced provably identical advert packets end to end).
Fixed by mixing in real crypto.getRandomValues()-sourced entropy from the
host page (new sim_instance_entropy(), read the same way simInstanceTag
already is) into both SimRNG::begin() and the twin seeding pattern in
SimRadio::getRngSeed(). Applies to every sim instance uniformly (hero/B/R
all get proper per-session entropy now), not just the new relay path --
strictly an improvement with no compatibility concern, since identity
generation only ever runs once per fresh/empty IDBFS.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
- Turn on ENV_INCLUDE_GPS/UI_SENSORS_PAGE for the sim build (both were
compiled out entirely, so the GPS and Sensors home-page carousel
entries didn't exist regardless of home_pages_mask) -- SimSensorManager
already fed a real JS-settable GPS fix and a temperature/battery
channel with nothing to display them.
- Add sim_test_advert_flood() to the repeater build too, mirroring
companion_radio's hook: MyMesh::updateAdvertTimer() otherwise leaves
the repeater's first self-advert 2 minutes out, so a host page
couldn't make it discoverable as a contact (needed for admin login)
right away.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
NodePrefs::auto_off_secs defaults to 15 -- real power-saving behaviour a
battery-powered board needs (screen off, optionally locked, 15s after
the last input). UITask::autoOffMillis() treats 0 as "never" and skips
that whole branch in UITask::loop() entirely, so there's no separate
flag to touch. A demo running on a visitor's screen has no battery to
save and no reason to go dark while they're reading it.
sim_test_disable_screen_timeout() is a new sim-only hook, same shape as
the other sim_test_* boot-time hooks: meshcore-solo-site calls it once
after boot.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
NodePrefs::tz_offset_hours defaults to 0 (UTC) -- correct for real
hardware, which has no other way to know the visitor's timezone besides
Settings > System > Timezone. SimRTCClock (see 718dbdbe) is already
correct live UTC (time(NULL)), but without a timezone applied, a demo
instance's Clock screen displayed correct-but-UTC time, which just reads
as "wrong" to a visitor who never opened Settings -- e.g. 20:40 shown
while it was really 22:40 CEST. This is the other half of the site's
"would be nice if the time was synced with the computer" ask; 718dbdbe
only fixed the stale-IDBFS-restore half.
sim_test_set_timezone_hours(int) is a new sim-only hook, same shape as
sim_test_show_all_home_pages(): meshcore-solo-site calls it once after
boot with the browser's own timezone offset. Whole hours only
(tz_offset_hours is an int8_t) -- same limit a real device's own
Settings field has.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
A Reset control on a host page (meshcore-solo-site's RESET button,
mesh.html's own Reset buttons) re-invokes the MODULARIZE factory for the
same simInstanceTag to simulate a device restart, since board.reboot()
just exit()s the wasm process (inert / freezes the tab under
-sEXIT_RUNTIME=0). Nothing ever tore down the OLD instance's own
emscripten_set_main_loop() callback, so it keeps ticking forever after
being "replaced" -- and keeps drawing onto the same simInstanceTag-keyed
<canvas> the new instance draws onto too. Two visible symptoms this
caused on meshcore-solo-site: flicker/reversion after resetting the same
device more than once (multiple orphaned instances competing for one
canvas), and -- together with the HomeScreen::poll() fix in 5fbfd7c5 --
would have still left a residual single-old-instance repaint race even
after that fix alone.
sim_stop_main_loop() wraps emscripten_cancel_main_loop() so a host page
can explicitly stop the OLD Module reference right before discarding it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
_shutdown_init (set true once KEY_ENTER is pressed on the Shutdown home
page) was never cleared, so this branch kept calling _task->shutdown()
on every single poll() tick indefinitely once triggered.
Invisible on real hardware: _board->powerOff() halts the MCU in the
non-restart path, so there's no next tick to matter. But
SimMainBoard::powerOff() is a deliberate no-op (no real hardware to
power off), so a sim instance keeps running after "shutdown" -- and each
repeated shutdown() call re-fires _display->turnOff(), which blacks out
its <canvas> (keyed by simInstanceTag) again on every frame.
This is what made meshcore-solo-site's RESET button unusable after a
device had been shut down: the still-running old instance kept
re-blacking the very canvas a freshly reset instance (same tag, same
canvas element) was trying to render its own boot splash onto -- visible
as a black screen, with the new instance's splash winning a single frame
every so often before being painted over again.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
DataStore::restoreRTCTime() runs on every boot and, if a prior save
exists, overwrites RTCClock with that stale timestamp. Correct on real
hardware (no other way to know the time before a GPS fix or a phone/CLI
sync), but SimRTCClock is already backed by the real host wall clock from
construction -- overwriting it with an old IDBFS-persisted save made a
returning meshcore-solo-site visitor's on-screen clock drift away from
their own real time instead of just showing it. Guarded behind #ifndef
SIM_PLATFORM.
sim_test_show_all_home_pages() is a new sim-only test hook, same shape as
the existing sim_test_* hooks in this file: real hardware ships with a
curated 5-page Home carousel (NodePrefs::HP_DEFAULT) so a first-time user
isn't handed 13 pages to joystick through, with the rest opt-in via
Settings > Home Pages. meshcore-solo-site calls this once after boot to
show the whole feature set instead, without touching the real-hardware
default.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
UITask::shutdown() busy-waits on buzzer.isPlaying() for up to 2.5s before
powering off. On real hardware that's a real (if crude) wait; in the
Emscripten sim it's a synchronous block on the browser's single JS/wasm
thread, which freezes the whole page for the duration -- reported as the
site "zacinanie się" (stuttering) whenever hibernate/shutdown triggers.
Guards it with #ifdef SIM_PLATFORM, mirroring the identical pattern
already used a few lines below for the low-battery pre-shutdown pause.
Verified empirically (not just by reading the diff): measured real
requestAnimationFrame throughput on meshcore-solo-site while triggering
hibernate for real (Home -> Shutdown page -> Enter). Before: 135 frames
in 3.5s (607ms max stall). After: 633 frames in the same window (110ms
max) -- confirmed with a real stash/rebuild before-after control.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
Code-review pass over the buzzer/sim commits turned up several real bugs,
plus two issues found afterward from manual browser testing:
Rendering (SimDisplayDriverCanvas, variants/sim/SimDisplayDriver.h + target.cpp):
- getTextWidth() measured UTF-8 BYTES (strlen()*6), not codepoints. Since
b067e95b stopped stripping accents, any accented string now measures
double its real width -- mis-centred titles, premature ellipsis/marquee,
badges pushed off-screen. Now uses the real MiscFixedRenderer measurement
(miscFixedTextWidth()), same as SH1106Display/SSD1306Display.
- Added the matching getCodepointWidth() override (O(1) single-glyph
advance), same pattern as SSD1306Display.
- isSingleFont() was left at the base class's `false`, though this backend
only ever renders MiscFixed -- UITask.cpp's status-bar indicator height
keys off this (`lh-2` vs `lh`), so the sim drew it 2px taller than a real
board.
- print() blitted the full 128x64 canvas on every call (dozens per frame,
60fps) -- now tracks a dirty bounding box and only clears/blits the
region actually touched.
Web Audio (buzzer bridge, index.html + mesh.html):
- No AudioContext.resume() -- a context created (or later suspended) in the
'suspended' state (Safari/Firefox, or any browser backgrounding the tab)
stayed silent forever. Now resumed on every gesture.
- linearRampToValueAtTime with no anchoring setValueAtTime interpolates
from the LAST scheduled event, not "now" -- so the anti-click ramps could
effectively snap instead of fading. Fixed with cancelScheduledValues +
setValueAtTime(current) before each ramp.
- mesh.html: a gesture only armed the clicked instance's audio. Click A,
send A->B, and B (the one actually meant to beep on receipt) stayed
silent. Now any gesture arms both A and B.
- RTTTL rests (freq=0, still "playing") now explicitly hold pitch and drop
gain instead of it happening to work by coincidence.
Misc: sim_test_get_num_contacts() was missing the g_sim_ready gate every
other sim_test_* hook has, so it could return a bogus negative count before
setup() finishes seeding num_contacts.
Splash screen missing "Solo <version>" bar: variants/sim never defined
FIRMWARE_SOLO_BUILD (every real Solo board does), so SplashScreen silently
skipped that whole line -- the sim looked like a plain non-Solo companion
build. Added -D FIRMWARE_SOLO_BUILD=1 to platformio.ini and build_wasm.sh.
Verified on a real canvas screenshot: "MESHCORE 1.17.1 / 19 Aug 2026 /
Solo v1.27".
Wasm-fetch error message: "failed to start: RuntimeError: Aborted(both
async and sync fetching of the wasm failed)" is Emscripten's own opaque
message for the single most common real cause -- the page opened via
file://...index.html instead of served over http(s) (fetch() on a local
file is blocked by CORS in both Chrome and Safari, confirmed by reproducing
the exact same error/stack via file://). Both harnesses now detect
location.protocol === 'file:' and show an actionable message with the
one-line fix instead of the raw stack trace.
Battery-set latency: SimMainBoard's battery value is an exact, instantaneous
JS-set integer (see sim_battery_set_mv()), but UITask's battery-check code
polls it every 8s and runs it through an EMA (alpha=0.2) meant to smooth a
REAL board's noisy ADC -- so a value typed into the demo UI could take tens
of seconds to visibly settle. SIM_PLATFORM now checks every 250ms and skips
the EMA (nothing to smooth), since the reading is already clean. Measured
on real canvas pixels: indicator update now lands within one screen-refresh
cycle instead of up to 8s+.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
genericBuzzer (src/helpers/ui/buzzer.h/.cpp) gets a third platform branch,
#elif defined(SIM_PLATFORM), alongside the existing NRF52 (direct PWM) and
NonBlockingRtttl paths -- purely additive, no changes to either real-hardware
branch. It reuses the NRF52 branch's already hardware-free RTTTL parser
(_parseHeader/_parseNext/_noteFreq, now shared via a widened guard) but
tracks (current frequency, note-end-time) instead of touching real PWM/timer
registers, advancing on plain millis() polling from loop() -- same
non-blocking shape UITask already drives every tick.
Wired into the sim build the same way every real board sets its buzzer pin
(-D PIN_BUZZER=<n> in build_flags/DEFINES; here it's a dummy sentinel since
there's no real pin, just something to activate the existing #ifdef
PIN_BUZZER guards in UITask.h/.cpp/SoundNotifier.h unchanged), plus two new
small UITask accessors (isBuzzerPlaying/buzzerFreqHz/buzzerVolume) and three
EMSCRIPTEN_KEEPALIVE exports so a host page can poll the buzzer's state.
Browser side: one Web Audio oscillator+gain per companion instance (index.html
single-instance; mesh.html per A/B, not R which is headless), created lazily
on the first real user gesture (AudioContext autoplay policy), polled every
20ms and mapped to the oscillator frequency/gain -- so every notification
sound, ringtone, alarm, and volume-blip that already worked on real hardware
now actually produces audio in the browser, unchanged at the call-site level.
Verified end-to-end with real RTTTL playback traces (not just "no errors"):
the startup jingle's exact note frequencies (C6/E6/G6) and a real DM-received
notification triggering the receiving instance's Web Audio gain node from 0
to its mapped volume and back, matching the actual "MsgRcv3" melody's notes.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
getContactByIdx() indexes the raw contacts[] table directly, whose first
MAX_ANON_CONTACTS (8) slots are reserved for anon requests -- getNumContacts()
already excludes them from its count, so real contacts start at index
MAX_ANON_CONTACTS, not 0 (NearbyScreen.h's own contact scan already applies
this offset; its comment documents why).
MessagesScreen.h's buildContactList() didn't, so its loop only ever read
the reserved anon slots (empty name, type 0) for any total at or under
MAX_ANON_CONTACTS -- e.g. a device with exactly one known contact would
show "SELECT CONTACT" / "No favourites" with an empty list forever,
regardless of the dm_show_all/fav_only setting or that contact's own
favourite flag. Reproduced live in the browser sim: a fresh companion_radio
instance with one real ADV_TYPE_CHAT contact showed nothing until this fix.
Also fixed _sorted[]'s stored index (was the bare loop counter, needed to
be the raw table index every other call site in the file already assumes)
and the same missing-offset bug in BotScreen.h's room-contact counter and
MessageHistory.h's pub_key-prefix contact lookup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Rounds out the browser sim harness with the rest of the physical board's
interactions: a reset button (JS-driven, since board.reboot() is inert
under -sEXIT_RUNTIME=0), GPS input wired into a real LocationProvider via
new SimSensorManager, JS-settable battery/environment telemetry, an
admin/repeater-login test hook (sendRoomLogin against the default
"password"), and full physical-keyboard text entry (printable ASCII
passthrough into the existing KeyboardWidget, Tab->KEY_KB_ENTER submit).
Also fixes three real bugs found while exercising all of this in a real
browser:
- UITask.cpp's native-only stdin poll branch had no __EMSCRIPTEN__
exclusion, so it also compiled into the wasm build and called a real,
blocking window.prompt() on nearly every frame -- the actual cause of
the reported time/controls jumping. Now gated to native only.
- 'n'/'p' were mapped as Next/Prev keyboard shortcuts, colliding with
typing those literal letters. Removed the shortcuts; added explicit
Next/Prev buttons to mesh.html (previously relied solely on them).
- Buttons grabbed native browser keyboard focus on click, so a later
stray Enter/Space could silently re-trigger a previously-clicked button
(e.g. Reset). mousedown now calls preventDefault() on all buttons.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two more real-vs-sim mismatches, found after seeing the rendered UI:
1. The Clock screen's big time display (setTextSize(2)) rendered at size 1
-- SimDisplayDriverCanvas ignored setTextSize() entirely (a leftover
no-op from the old system-font renderer) and never overrode
getCharWidth()/getLineHeight(), so the big-digit layout math in
UITask.cpp's drawBig() came out wrong even once print() itself gained
real font support. Track _text_sz, scale both metrics by it (matching
SSD1306Display's own getCharWidth()==6*_text_sz pattern), and pass it
through to miscFixedPrint() in target.cpp instead of a hardcoded 1.
2. The Home carousel's "<PRESS_LABEL> to open" hint said "long press to
open" -- true only for touchscreen-only boards with no dedicated Enter
button (PRESS_LABEL's #if UI_HAS_JOYSTICK / #else split in
examples/companion_radio/ui-new/UITask.cpp). The sim's D-pad + OK key
behaves like a joystick board (a SHORT Enter press opens each page;
holding it separately reaches the real context menu via
handleLongPress()), so showing the touchscreen wording was both
inaccurate and different from what a real joystick board like Heltec V3
displays. Added SIM_PLATFORM to that #if alongside UI_HAS_JOYSTICK --
UI_HAS_JOYSTICK itself stays unset, since its other two gates
(begin()-ing/polling real joystick MomentaryButton objects) need
hardware the sim's target.cpp doesn't declare.
Verified in real Chromium: Clock screen shows "08:11:10" at real double
size above the normal-size date line; Home carousel now says "press Enter
to open". Full regression clean: 3 native envs, wasm companion_radio, the
2-instance+repeater mesh demo, and the long-press context-menu test.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two prototype polish fixes ahead of the website embed work:
1. Holding Enter (the sim's main way into "the rest of the options") did
nothing -- the JS bridge's sim_enqueue_key() went straight to
enqueueKey(), bypassing UITask::handleLongPress() entirely, so
KEY_CONTEXT_MENU could never be reached. Add injectSimKeyLongPress()/
sim_enqueue_key_longpress(), which does route through the real
handleLongPress() (same code a real MomentaryButton(pin, 1000, ...)
reaches), and wire up press-and-hold (buttons + Enter/Space key) in both
web harnesses with the same 1000ms threshold real hardware uses.
2. SimDisplayDriverCanvas::print() drew text with the browser's own system
font (ctx.fillText, '8px monospace') instead of the real bitmap font a
MeshCore-Solo board renders with OLED_MISC_FIXED_FONT=1 (see
solo/heltec_v3/platformio.ini). Vendor the real Adafruit_GFX (unmodified,
from the same PlatformIO registry package a real board build pulls) into
variants/sim/thirdparty/gfx/, and render print() through the real,
shared src/helpers/ui/MiscFixedRenderer.h + MiscFixedFont.h -- byte-
identical glyphs to real hardware, not a look-alike.
Verified in a real Chromium (Playwright): short Enter -> "CLOCK TOOLS",
held Enter -> "CLOCK FIELDS" (gotoDashboardConfig(), proving
KEY_CONTEXT_MENU is really reached); font renders as hard square pixels,
inverse/selected-row text still punches correctly through a filled bar.
Full regression re-run clean: all 3 native envs, wasm companion_radio, and
the two-instance + repeater mesh demo (relay routing, DM delivery).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Mirrors the simple_repeater sim port exactly: headless (no DISPLAY_CLASS,
UITask.cpp excluded from the build), new sim_simple_room_server native env
plus build_wasm_room_server.sh, own SimFS root ./sim_data_room so its
identity storage can't collide with the companion or repeater instances on
the same page/cwd.
Verified beyond "it compiles": ran the native binary and confirmed a real
_main.id identity file gets persisted through the actual SimFS/IdentityStore
path, same as the other two sim targets.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Scott Powell
JakubandClaude Sonnet 5
liamcottle
Michael Graff
3urobeat
Rastislav Vysoky
João Brázio