Wessel Nieboer
32bd6d48d6
Fix T-beam Supreme S3 display
2026-08-10 13:39:16 +02:00
Wessel Nieboer
4605d3b6ce
fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers
2026-07-09 16:31:28 +02:00
Wessel Nieboer
7c8e092457
Have CAD be a separate toggle (set cad on/off)
2026-06-14 15:20:58 +02:00
Wessel Nieboer
4f9a091671
Use hardware channel activity detection for checking interference
2026-06-14 15:19:18 +02:00
Wessel Nieboer
3bde089bdb
Gate PIN_GPS_EN
...
Do not reference it unconditionally
2026-05-07 00:31:15 +02:00
Wessel Nieboer
c5bf23f4b1
bump simple_sensor version to v1.15.0
2026-04-30 11:12:31 +02:00
Wessel Nieboer
66fe9ac2db
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
...
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
Wessel Nieboer and Wessel Nieboer
057542625b
Fix T1000E press=high
2026-04-04 13:19:13 +02:00
Wessel Nieboer and Wessel Nieboer
0a13ac7fc7
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Wessel Nieboer and Wessel Nieboer
a5ae89aac0
Fix RAK4631 SX1262 hardware pin config
2026-04-04 13:18:17 +02:00
Wessel Nieboer and ViezeVingertjes
741392889d
Fix memcp compare length off by one
...
Co-authored-by: ViezeVingertjes <michael.overhorst@gmail.com >
2026-03-23 14:31:08 +01:00
Wessel Nieboer
7829c51898
Bump to RadioLib 7.6.0
2026-03-23 14:26:56 +01:00
Wessel Nieboer and ViezeVingertjes
3c0d186569
Fix memcp compare length off by one
...
Co-authored-by: ViezeVingertjes <michael.overhorst@gmail.com >
2026-03-11 20:08:47 +01:00
Wessel Nieboer
bcfe001370
Have our github PR sanity check also run against main and dev for every merge
...
This will pick up any easy to spot build failures on dev/main
2026-03-11 16:51:09 +01:00
Wessel Nieboer
e3afbf975e
Prevent auto-restarting BLE when disabling it on nRF52
...
If client is still connected, client would automatically reconnect
immediately thus keeping BLE on
fixes #1933
2026-03-10 14:31:58 +01:00
Wessel Nieboer
60b76f56d9
update PR #765
2026-03-04 03:38:35 +01:00
Wessel Nieboer
801ed6bb0a
Merge remote-tracking branch 'origin/dev' into fix-incorrect-ram-flash-maximums
2026-03-04 03:37:01 +01:00
Wessel Nieboer
1ab8a6f6da
Address review comments
2026-03-04 03:13:53 +01:00
Wessel Nieboer
c0c9c17cf5
and buildscript
2026-03-03 15:37:33 +01:00
Wessel Nieboer
780720c117
and board!
2026-03-03 15:37:33 +01:00
Wessel Nieboer
90fcd1043f
Fix ikoka handheld build
...
The extends was wrong.
2026-03-03 15:37:32 +01:00
Wessel Nieboer
14f066bed0
Fix sleep
2026-03-02 11:34:42 +01:00
Wessel Nieboer
8b7fed65de
default lna_enabled=true
2026-03-02 11:34:12 +01:00
Wessel Nieboer and Wessel Nieboer
8a9a0dca5f
Fix GPS +8mA power leak when disabled (nRF52)
...
On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN.
MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3
rail) but stop() never set it back LOW, leaving the GPS module powered
even when disabled.
Assert reset pin in stop() to mirror begin(), and guard
_location->loop() behind gps_active check.
Fixes meshcore-dev/MeshCore#1628
2026-02-28 19:13:42 +01:00
Wessel Nieboer and Wessel Nieboer
b2032e11b6
make it more dry
2026-02-28 19:09:25 +01:00
Wessel Nieboer and Wessel Nieboer
9106ab46e1
reset noise_floor sampling after agc reset
2026-02-28 19:09:25 +01:00
Wessel Nieboer and Wessel Nieboer
a2dc2eb50c
when doing AGC reset, call Calibrate(0x7F)
...
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
2026-02-28 19:09:25 +01:00
Wessel Nieboer and Wessel Nieboer
f81ec4b14c
fix agc reset
2026-02-28 19:09:25 +01:00
Wessel Nieboer and Wessel Nieboer
5a5568ed56
Drive CTX low first
2026-02-28 19:09:06 +01:00
Wessel Nieboer and Wessel Nieboer
d9e67222f5
prefs is 5 char length :nerd:
2026-02-28 19:07:38 +01:00
Wessel Nieboer and Wessel Nieboer
2bb6f636a4
Add 1ms delay after powering PA (cold-boot)
2026-02-28 19:05:31 +01:00
Wessel Nieboer and Wessel Nieboer
329e408197
Hold GC1109 PA_POWER during deep sleep for LNA RX wake
...
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.
Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.
Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
Wessel Nieboer
ffc9815e9a
Fix packet pool leak when rx queue is full
...
PacketQueue::add() silently dropped packets when the queue was at
capacity. The packet pointer was lost — never enqueued, never returned
to the unused pool. Each occurrence permanently shrank the 32-packet
pool until allocNew() returned NULL and the node went deaf. Return bool
from add() and free the packet back to the pool on failure.
2026-02-17 23:54:33 +01:00
Wessel Nieboer
e8646f5ede
Parse as signed int
2026-02-07 16:58:06 +01:00
Wessel Nieboer
23b4baa066
Enable register patch heltec tracker v2
2026-02-07 16:04:01 +01:00
Wessel Nieboer
c4c287d01b
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
Wessel Nieboer
0b1fd580f1
Fix double claim, eliminate dead code at compile time
2026-02-06 11:35:05 +01:00
Wessel Nieboer
