- UITaskBase holds what both UIs' shutdown() and low-battery check share:
the saves before the goodbye sound, the power-down (GPS through its
provider) and the battery EMA and threshold.
- L2 SD archive: a channel's file is keyed by its secret only, so renaming
keeps the history; old files are renamed once at boot.
- L2 fetch: abandoning a request and the task finishing it are one critical
section (it could stay DONE for good); TileCache gets the read-side barrier.
- Text from a repeater or sensor no longer rings on the device (nothing to
open); a settings switch reads any non-zero value as on; the message
toast never cuts a letter in half; ui-new's GPS helpers ask UiCore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pure move: each section now sits in its own header, included where its
code was, so the order of definitions is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings schema gains Privacy (position in adverts, who can ask for
status / location / sensors), Adding contacts (all or by type, max
hops, replace oldest) and Advanced radio (path hash size, double ACK,
listen before talk, interference threshold, RX boost, RX delay,
airtime factor); both UIs build their rows from it
- Auto-advert carries position only when Position in adverts is on
- ui-new accordion holds 16 sections and 128 rows
- docs: settings, tools, feature matrix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new: Status › System, Enter shows it full screen. L2: Settings › About.
One precomputed 25 x 25 matrix (ui-core/SiteQr.h) for both, so no QR
library; the URL in upper case keeps it at version 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new's messagesInView() and ui-lvgl's threadInView() hold the
lit-and-unlocked test the viewing checks repeated; the keyboard's three
copies of the backspace call deleteBeforeCursor(). A stale comment on the
cursor-mode hint goes, onDisplayOn() sits after the view helpers it calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A conversation left open under the lock screen or a dark display no longer
counts as read: the counters and the lock screen's tally go up, and on
waking (L2: on unlocking) the conversation reopens on its first unread
under the "New" line, a typed draft kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Contacts and paths are saved a while after the change and never while the
user is active, so a send no longer stutters on the 53 KB contact rewrite
(a path that came back unchanged isn't written at all). The clock is saved
every 30 minutes and restored no earlier than the firmware's build day.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A pending DM shows a dot per send, as on the L1. The thread is read from
the SD archive, which a resend never updated: it does now, and the
thread's signature and patch state count the attempt.
- Nearby redraws when a node goes live, changes type or the units change;
the scan popup when a name or the remote SNR arrives.
- The user LED is active high: it was lit all the time and went dark
while transmitting.
- Sim hooks "dm" and "send" for testing a DM thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display > Message alert: Normal keeps the sliding banner; Compact shows an
envelope with the unread count beside the battery (in the header line where
there's no status row), blinking for 2 s; Off shows nothing. The blink only
ever brings the next frame earlier, so it no longer holds back the UI's
animations while it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit is what the send leaves of MAX_TEXT_LEN: a channel post carries
"<node name>: ", a direct message resent more than three times keeps two
bytes spare, and placeholders count as they expand (msgtext::limit/sentLen).
Bytes, not characters. The path and packet header sit outside the payload;
static_asserts keep a full message within the radio frame on the longest path.
From 40 bytes left the count shows: on the L2 as a tag on the field's top
edge, on OLED/e-ink at the right of the preview's last line with the text
wrapped short of it. Input stops at the limit; a send still over (a
placeholder grew) is held. Sim hooks to open a compose with text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tab a screenful: the sky plot beside the fix; the bars with a fixed
dB-Hz scale and the constellations; and Details with whatever else the
receiver reports (correction, locator, course, DOPs with their rating,
signal averages, NMEA counts). Sim: sim_open("gps").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Chart.h draws Diagnostics > History, the noise sweep and the trail's height
profile: round values up the left, labels along the bottom, a solid fill
(no transparency) and, under a finger, the sample's value and when / where.
Sim: sim_open("histdemo") / ("profdemo") fill them with made-up data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home and the lock screen draw HH:MM in ui-core/Lettering.h's block digits,
the seconds smaller on the same baseline, leaning smoothly per screen row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACCENT_DIM (the accent mixed toward black) came out brown on selected
tabs, chips, segments and own bubbles. They take the accent with dark
text now, as primary actions and the quick panel tiles do:
styleSelected() sets the fill, the pressed shade and every label under
it. Own bubbles: dark text, age and delivery mark (green or red can't be
read on amber); the melody editor's selected note is outlined, the
sounding one filled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/prefs holds a header (magic, format version, size, CRC-32), the node's
position and NodePrefs as it is in memory, in place of /new_prefs' two
hand-kept field lists and 0xC0DE00xx schema bumps. A new field goes at the
end of the struct; moving one bumps PREFS_VERSION. sanitize() keeps every
value in range.
The first boot after an update from before 2.0 imports only the first
block of the old file, laid out the same in upstream MeshCore and Solo
(name, position, radio, BLE PIN, scope), then deletes it; everything else
starts from the defaults. Contacts, channels, scopes, waypoints and trails
are untouched.
Gone: the page-order and GPS-interval migrations, the unused
trail_interval_idx / trail_units_idx / repeat_extra_scopes; fav_sort_off
and msg_wake_screen_off become fav_sort and msg_wake (on by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node detail: a card with a compass rose and the hop chain over the info;
the bar keeps Message / Admin / Add, Ping and Navigate, the rest goes to a
"More" group under the info (favourite toggled in place, delete by a second
tap). Nodes: an arrow by each distance. A trail's height profile in Map
tools and a saved trail's popup. Diagnostics > History: battery, noise,
SNR and traffic charts. Clock > Calendar: today, the weekend and alarm days.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Big / Compact lock look is ui-new's; the shared schema row did nothing
on the L2's slide-to-unlock card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-core: Diagnostics::systemLines, NearbyModel::typeShort,
rptctl::currentPresetName, RoomSessions::pendingKey, settings::isSwitch,
UiCore::reconcileDMUnread.
- ui-new: the retired Recent page, fmtAlt, the battMvToPercent wrapper,
setFavouriteChannelSlot, AccordionList onHeader/visibleCount, drawBoxedIcon
and seven unused icons; info::row folded into info::valueRow.
- ui-lvgl: onOpenNav, TileDownloader::withTrails; the trail header size is
one constant (TRAIL_HDR) for live and saved trails.
- Home quick panels save prefs only when a value changed.
- Comments brought in line with the code (status bar reserve, settings rows,
page order, SH1106 frame skip, UiCore header).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Battery curve: NodePrefs batt_curve_mv[11] (voltage at 0..100 %, all
zeros = built-in LiPo curve, sentinel 0xC0DE0032). ui-core/Battery.h
uses it for every percentage. L1: Settings > System > Batt curve list
(Left/Right 10 mV, Reset); L2: Settings > Power > Battery curve chart
with draggable points and a line at the cell's voltage.
- L2: the Nodes map is the full navigation map plus the nodes, Back
returns to Nodes; the favourite button is lit while it is one; pinning
to the Home dial uses a thumbtack (fonts regenerated); minimap dots
follow the accent; arranging tiles shows where they land while dragging;
emoji row in Diagnostics > Font.
- Sim hooks: sim_open nodesmap / accent@N / homeedit / battcurve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New message, Nodes (and its Scan popup), Admin and Messages show their
items through one virtual list: a screenful of rows, handed to the next
item as one scrolls out, the scroll extent from the items' heights. 256
contacts: 522 objects and ~950 ms of filling in (frames up to 96 ms)
before, 19 objects at once now; a scrolled frame 28.5 -> 11.7 ms. Nodes
257 -> 49 objects. A new message rewrites Messages' rows in place
(46 -> 20 ms) instead of building the screen again; it's rebuilt only
when "Read all" comes or goes. A held row keeps what it shows until let
go. Perf tools: -D PERF_LISTS, -D PERF_LIST_MUL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rows still to build wait while a screen slides in, so its frames aren't
a fill budget apart (Nodes: 12 frames of 24 ms instead of 7 of 33, up to
65). The crash dump in flash is read at boot, not on the first
Diagnostics (build 54 -> 20 ms). The perf tools time Nodes too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel takes each 24-line band by DMA while LVGL draws the next one
into the other buffer (two 15 KB buffers in internal RAM; LovyanGFX's
4092-byte DMA descriptors leave PSRAM unaligned for the S3's DMA, which
showed as shifted and smeared bands). LVGL draws in the panel's byte
order, and so do map tiles and the frozen screen under a popup, so
nothing is swapped on the way out. Full frames ~10-25% faster (page1
19.9 -> 14.7 ms, Home 21.4 -> 18.2 ms). Without the internal RAM the
screen is sent as before. The arduino2 env keeps the old way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A popup over a still screen is frozen and dimmed as it opens, so the
panel's rise redraws only the panel: 6-8 frames of 19-25 ms instead of
3-4 of 45-65 ms. Picker options are one label each (time zone list
97 -> 52 ms to build). The bottom popup no longer animates a dim of 0.
Repeater updates its hint in place (130 ms rebuild gone); Auto power,
Imperial units and Relay on rebuild the screen after the knob has
moved (rebuildSoon). -D PERF_CONTROLS times every control on the
settings screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 404/503 answer (OpenTopoMap renders on demand) went to an immediate
2 s retry and counted as network loss, so each tile then waited up to
60 s. Answered errors now go straight to the retry list; long pauses
only when there is no answer at all. Three retry rounds (20/60/120 s)
for the tiles still missing, transfers cut after 30 s, failures logged
on serial.
Download popup tidied: title + floating close, percentage instead of
tile counts (also on the map pill), no dead zoom row, no finish toast
after Stop or while the popup shows the result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A group row's text column (and an info row's key) grows into what the
controls on its right leave, and LVGL lays out children before their
parent, so its labels were first measured 1 px wide; LVGL also works out a
new label's height at its old width (0) before the real one. Each height
that changed then took another pass up the screen: 4-6 passes per screen.
rowsFit(), run before a frame's layout (LV_EVENT_REFR_START) and by
layoutNow() in place of every explicit lv_obj_update_layout(), gives each
new row's growing child the width the flex will give it, worked out from
the other children's styles and text, and labelFit() measures wrapping
labels at their real width up front. The grow stays, so a control that
can't be sized ahead only falls back to the old passes.
Layout on the device: Display page 34 -> 24 ms, Bot 33 -> 18, Quick
37 -> 22, Radio 26 -> 18, Diagnostics 20 -> 12. Sim screenshots of 26
screens unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An infinite lv_roller measures its whole option text (repeated three
times) on every style change, layout pass and frame. The hand-drawn wheel
draws only the visible rows, with the same look, drag, throw, tap and
wrap-around. Clock first frame 99 -> 54 ms (layout 42 -> 12 ms).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
UiCore::setGpsEnabled() wrote the prefs to flash at once, which stalled
the loop mid-animation. It takes save = false now (default true, the L1
unchanged); the L2 marks the prefs changed and writes them on leaving
the screen, as its other switches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found by counting flushes on idle screens in the sim:
- The compose field's cursor blinked (a redraw every 400 ms) as soon as
a conversation opened, the keyboard hidden: lv_keyboard_set_textarea()
focuses the field, and LVGL only stops a blink when the cursor moves.
fieldFocus() sets the state and nudges the blink; also used for the
WiFi and channel fields, which left theirs running.
- lv_obj_align_to() restyles on every call, so the status bar's icons
redrew every second; placeLeftOf() moves them only when they move.
- Text colours set every second (nav bar, GPS status, Diag errors) go
through setTextColor(), which skips an unchanged colour.
- A LV_LABEL_LONG_DOT label writes its "..." into its own text, so
setText() never matched and rewrote it every refresh (the nav bar's
hint); labelShows() reads past the dots.
- The map area, the area-outline, trail and vector-label layers were
invalidated on every map refresh (every 3 s, a full-map redraw); now
only when the view or what they draw changed.
Idle map: 17 -> 1 flush in 5 s; list and settings screens: 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The editor has its own 80 % dim layer, not a popupOpen() one, so every
key press redrew the list under it and blended the dim over it. It now
freezes the screen like the popups (freeze::now); the frozen image takes
the dim layer's own level instead of assuming 60 %.
Keyboard redraw 38.7 -> 29.7 ms, full frame 46.3 -> 39.7 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The map screen's own fill is only painted where the map area doesn't
cover it (the strip it uncovers as it drifts in); the area and the
opaque status bar hide the rest. ~2 ms a frame.
- With every visible cell holding a tile, the map area drops its fill and
grid, which lie under the tiles anyway, and still reports that it
covers what's below (coversOwnArea, shared with the frozen popup
image). The Home minimap drops them the same way. ~5 ms a frame.
Full map frame ~50 -> 46-48 ms on the L2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Kept for the optimisation pass before a release:
- perfDrawProfile(): a full redraw timed per object (its own drawing),
totals by kind and the costliest listed -- on settings pages, Contacts,
Home, the map and under a frozen popup; the screen's entrance frames too.
- Per screen: build, layout, first draw and redraw apart.
- A popup over Home: a full frame dimmed live and frozen.
- The reset reason and a core dump summary at start.
- -D PERF_WRAP_TEXT with -Wl,--wrap= of lv_text_get_size_attributes,
lv_layout_apply, lv_obj_get_style_prop_internal and lv_obj_send_event:
text measured, flex runs, style reads and events per screen.
- -D PERF_KEEP_USB leaves the USB popup up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Once a popup's dim is up, the screen below is drawn once into an image
(LV_USE_SNAPSHOT), darkened as the dim layer darkens it, and shown opaque
over the screen with the dim layer cleared. LVGL then starts drawing from
that image; an lv_image with no background never reports that it covers,
so it answers the cover check itself. A full frame under a popup: 45.7 ->
32.6 ms; freezing costs ~29 ms once, as the popup settles.
One popup at a time (a second one dims live), a strip keeps the status
bar dimmed under top-layer popups, the image goes with its popup, and the
popup dims live again if its screen goes first. POP_BOTTOM (over a live
map) isn't frozen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LVGL lays out children before their parent, and a new box's size is only
known after a pass, so every level sized in % of the one above cost a whole
extra layout pass over the screen. innerW() works the width out from the
styles instead; fillWidth() sets it on infoCard, infoLine (every row),
noteLabel and scrollList, and the screen body is px-wide.
Display & power page: 101 -> 76 flex runs, layout 68 -> 54 ms, first
frame 161 -> 146 ms; the other settings pages and Radio / Bot / Quick
alike. Four passes remain: a row's text column grows beside its control,
so its width is only known after the row's own layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Measured on the L2 (steady full frames): Settings page 37.7 -> 31.4 ms,
Display 41.5 -> 37.9, Contacts 34.6 -> 32.9, Home 37.3 -> 32.4.
- styleSurface() leaves boxes in the page colour unpainted; styleOpaque()
for the screen and the status bar, which things slide under.
- group() cards clip their corners only while a row is held
(rowPressable(), shared by the tappable rows).
- rowSlider(): the track an opaque tint (theme::mix(), also behind
ACCENT_DIM) instead of 20 % accent blended every frame.
- Map buttons, pills, scale, nav bar and the Home minimap labels opaque.
- Screens drift in without the fading cover: its full-screen blend was in
every entrance frame (page 39 -> 29 ms).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The list fill becomes a small job queue (fill/then/fillStart, fillTick with a
25 ms budget per pass). Settings pages build section by section in
schemaRows, with the trailing extras (melodies, prune, quick messages) queued
after them so the order stays; Radio and Repeater build by group, Admin's
repeater pick like the contact list, Diag's Live tab by section. Rebuilds
that restore the scroll flush the queue first. Screens went from 220-360 ms
to 80-175 ms (build + first frame).
Diag's crash line read the core dump in flash every second (~44 ms each);
it is read once now. The perf run times every page and dismisses the USB
popup, which had covered all earlier measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A widget costs ~1 ms on the L2, so Nodes with 48 rows held the screen for
~600 ms and a full contact list for over a second. fillStart() builds the
first screenful at once and fillTick() adds the rest ~25 ms a pass.
- Nodes: 6 rows first; the 2 s refresh rewrites built rows in place
- New message: contacts filled the same way
- Settings: a group at a time (all at once when coming back scrolled)
- Nodes 671 -> ~200 ms, Settings 376 -> ~190 ms longest UI stall
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- TileCache: request() hands z/x/y to a task on core 0, which renders into
a spare buffer; poll() swaps it into the LRU slot (stale results dropped
after drop()/invalidate()); the sim runs the job at once
- MapScreen / Home map place finished tiles as they arrive; the longest
UI stall with the map opening goes from ~340 to ~170 ms
- LVGL allocates from the PSRAM heap (lv_mem_psram.h), safe from both
tasks; LVGL's own pool is gone
- lv_conf: notes why LV_OS_FREERTOS with two draw units stays off
(measured slower: drawing is bound by PSRAM bandwidth)
- UI_PERF_TEST: the map (tile read/decode, pan, redraw), build time and
the longest loop pass per screen
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trail on the L2: 32768 points every 5 m, no simplification, no point
spacing setting; copied to the card every minute and restored at power-on.
The line keeps up with the position dot (incremental sync, pending point).
Map: a tap's finger jitter no longer turns follow off; the GPS button
shows when the map follows. The trail is drawn as one polyline with
breaks and off-view chunks skipped (an lv_line queued a draw task per
point).
Fewer rebuilds: conversation bubbles patched (new messages, delivery
marks), home mini-map dots reused, Nearby rows rewritten in place,
history read in runs and each file opened once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CMD_GET_SCREENSHOT on colour screens: display type 2 (RGB565 LE),
32-bit payload size; ui-lvgl captureFrame() shared with the SD BMP
- ENABLE_SCREENSHOT in the L2 build; tools/screenshot.py decodes type 2
- docs and READMEs point to solo.marekzegarek.com/#pc-tools
- USB popup: "Keep card" instead of "Charge only" (only the card is lent;
charging and USB serial work either way)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5