CONTACT_FLAG_ROUTE_PINNED was bit 4 (0x10) of ContactInfo::flags, which
upstream 1.18 made isRemoteCLIAllowed(): keeping a route to a contact let it
run any CLI command on the device remotely (radio, name, PIN, reboot,
wifi.pwd), and a contact the app allowed CLI had its route held. The kept
route moves to bit 7 (0x80). Not in any release (the route editor came
after rc3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every packet heard runs from its origin through the repeaters with a
position to this device; a packet sent is a ring. ui-core/PacketFlow.h
resolves them (UiCore::flow, MyMesh logRx/logTx -> Listener). ui-lvgl
draws them on the map's marker layer and repaints only their area while
they move; ui-new draws the last minute on the Nodes map ("Flow" in its
options). Setting: Map options > On the map > Packet flow, CLI map.flow.
Off by default. Sim-checked only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor results are links (node k hearing k-1 and back); toNode()
off traces only the repeaters (a companion answers only with repeat on);
probe() traces to each repeater in turn after no reply; failures carry a
reason; an empty list saves "direct". PingEngine takes over a slot left past
its timeout. A kept route: the dropped heard path isn't announced to the app
nor bumps lastmod; an app update keeps the flag only if it leaves the route.
Marker boxes sized for every dot and name (overflow).
ui-lvgl Route: one line per node with out / back dB coloured by quality, tap
a hop to move / remove, tap the node to include it, Keep in the header, Find
where beside a no-reply status. ui-new Path: To node / Find break rows,
result alerts, cursor kept on its action.
Channels: ui-new re-sorts the list on entering it, cursor on the same channel.
Docs: Path and trace, Channel order. Sim hooks: open route, add channel,
open messages.
Checked in the browser sim (L2 + ui-new peer + repeater); not on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor (UiCore::route) loads, edits, traces and saves the route to
a contact; MyMesh::sendTrace over an explicit route with per-hop SNRs,
setContactPath / setContactPinned. A route can be kept
(CONTACT_FLAG_ROUTE_PINNED, ContactInfo::flags bit 4): a path heard from the
node doesn't replace it and the last DM resend doesn't drop it.
ui-lvgl: Route screen (node detail), repeater picker by distance, picking
hops by tapping the nodes map (numbered badges, line, Undo / Done). The
map's markers are one drawn layer with hit-testing and name decluttering
instead of three objects per node.
ui-new: Path / trace view in the Nodes action menu; Add reuses the list
filtered to repeaters.
First cut: built for L2 LVGL, L1 OLED and L1 e-ink, tried on L2 only.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Home pages as they are now (Status, quick panels, Map page), the Status
screen's tabs instead of Diagnostics / GPS / Sensors, lock clock Big /
Compact and the hint on a key press, battery curve on L1 and L2, "+ Send"
and a failed send, trail pin, vector map behind -D MAP_VECTOR.
- Developer guide: drawScreenHeader, soft frames, InfoKit, TabBar, a status
bar without blinking, toast and millis() rules; ui-core status; build
flags (GPS_SKYVIEW, MAP_VECTOR, HIST_ARCHIVE added, ui-tiny-only ones out).
- New simulator screenshots: the clock page and the Status page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Short pages by feature (getting started, messages, contacts, navigation,
tools, settings, lock, hardware) instead of one page per OLED screen, with
Wio Tracker L2 differences as notes; facts checked against the code
(keyboard scripts vs. hold-for-accents, {batt}/{dist}, L2 limits and
settings layout). Developer guides and build flags under docs/solo/developer.
Old docs/solo_features and its ~50 screenshots removed; a hero banner and
three simulator screenshots added; links updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5