release-notes.md's v1.25 section already documents "Updated upstream
base to companion-v1.17.1", and that merge (68527e7b) is confirmed in
main's history -- but every MESHCORE_VERSION string, including
UITask.cpp's fallback default for boards that don't set it explicitly
(Heltec v3/v4, ThinkNode, Mesh Pocket, T-Echo), was still hardcoded to
the pre-bump "1.17". Bumped every occurrence to "1.17.1" to match what
actually shipped.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
pollHallSensor() acted on the raw pin reading immediately, unlike every other
physical-input path in this file (MomentaryButton, pollCardKB()'s own
last-raw edge check). A cheap mechanical reed switch -- one of the two
sensor types the docs explicitly recommend wiring here, alongside a
solid-state Hall IC -- can chatter for a few ms while the magnet crosses the
trigger distance, so a poll every loop() tick during that window could flip
_locked and fire _display->turnOff()/turnOn() repeatedly in that short span:
wasted work on any panel, and a real cost on e-ink where each is a slow
full-panel operation.
A raw reading now has to hold steady for HALL_DEBOUNCE_MS (25ms, same
threshold as MomentaryButton's ISR_DEBOUNCE_MS) before it replaces
_hall_magnet_present and triggers the lock/unlock actions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
No board in this repo has one built in, and no default pin is assumed
anywhere -- whoever wires a Hall-effect or reed sensor to a free GPIO sets
PIN_HALL_SENSOR (and HALL_ACTIVE_HIGH, for a sensor that pulls the pin high
rather than low on presence) as a build_flag on their own env. Entirely
opt-in and a no-op elsewhere, same pattern as PIN_GPIO1..4/ADC_MULTIPLIER/
CARDKB_ENABLE.
Level-triggered polling (like pollCardKB()) rather than an edge interrupt --
a magnet held near the sensor reads the same way every tick, so the new
pollHallSensor() only acts on the two transitions. Closing locks and blanks
the display with no wake grace (the cover is physically over the screen, so
there's nothing to show); opening unlocks and wakes it, with no key combo
either way. Both are independent of the Auto-lock setting, which is a
timeout, not a physical event.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Home key toggles the keyboard backlight but wasn't going through
checkDisplayOn() like every other TCA8418 key, so it couldn't wake a
sleeping display or extend the auto-off timer.
Also: removed a no-op #elif branch in ST7789Display.cpp (same values as
the #else it duplicated), and ENABLE_SCREENSHOT on the Cardputer ADV
solo env, which does nothing since ST7789Display has no getBuffer().
These views run the same live bearing/distance readout as Compass/Nearby's
navigate mode, which already held GPS awake -- these three didn't, so
duty-cycling could leave them stuck on a stale fix until the next scheduled
wake (up to the configured sleep interval).
Two races between the new GPS duty-cycle scheduler and code that changes
GPS state independently of it:
- gpsDutyCycleLoop() capped every "GPS on" phase at a fixed 60s and would
stop_gps() as soon as a fix went valid, with no awareness of an
in-flight "!gps fix" bot request -- so a fix's own up-to-300s acquire
window (and its 10s averaging phase) could get cut short by the
scheduler shutting GPS off mid-request. MyMesh::isGpsFixPending() now
feeds into UITask's existing "is anything live using GPS right now"
hold, alongside trail/live-share/locator/nearby.
- setSettingValue("gps", ...) (Settings toggle, bot !gps on/off, CLI)
starts/stops GPS directly without resetting the scheduler's own phase
timer, so a manual toggle could land on a stale, already-expired
deadline left over from before -- immediately re-stopping GPS a tick
after turning it on. The phase timer now resets on every external
change, so the next duty-cycle tick re-arms fresh.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
formatDashVal(), the locked-screen counterpart to the unlocked clock's
dashboard rendering, never learned about DASH_MSGS and fell through to
an empty string for it, so Messages was the one CLOCK FIELDS choice
that showed nothing at all once the screen locked.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New M5Stack Cardputer ADV variant (ESP32-S3, ST7789 TFT, built-in TCA8418
QWERTY keyboard, PI4IOE5V6408 LoRa-cap IO-expander autodetect), and a
KeyShield accessory variant for the existing LilyGO T-Echo Lite (external
TCA8418 T9 keypad + AW21009 backlight driver). Both keyboards share one
ENV_USE_TCA8418 polling block in UITask.cpp::loop(), coexisting with the
unrelated CardKB support (different chip/address/flag).
Fixes carried in from the contributed T-Echo Lite code: swapped GPS RX/TX
pins, TX-LED hooks, TCXO voltage, missing GxEPD2_122_T61 panel include.
Fixed during integration: I2C bus was probed for an RTC before Wire.begin()
configured its pins on Cardputer ADV (silent RTC autodetect failure).
Added dedicated *_solo_dual release envs for both boards (auto-picked up by
the solo-firmware release workflow). Gave the T-Echo Lite KeyShield solo
build -Os/-Ofast-unflag like every other nRF52 solo build (was missing,
cut flash usage from 90.7% to 61.4%).
Ported the shared misc-fixed 6x9 font (full Latin/Greek/Cyrillic, opt-in via
OLED_MISC_FIXED_FONT) to ST7789Display for the Cardputer's on-screen
keyboard. ST7789Spi isn't Adafruit_GFX-based like the other single-font
drivers, and this panel's logical->physical scale is non-integer, so glyphs
are re-packed to XBM and blitted through the existing drawXbm(), which
already does correct fractional-scale boundary math, rather than
duplicating that logic.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three power-saving additions, prompted by comparing this fork's existing
RX duty-cycle support against IoTThinks/EasySkyMesh:
- RX duty-cycle watchdog: the SX126x's hardware RX<->sleep sequencer runs
with no MCU polling, so a desync (a known failure mode) previously had
nothing watching for it. A new watchdog samples the BUSY pin every tick;
no transition for too long triggers a soft re-arm, then a full chip
reset (with cached radio params reapplied, since std_init() resets to
compiled firmware defaults) if that doesn't clear it. Soft/hard recovery
counts surface on Tools > Diagnostics > Live as "RXPS wd s/h".
- Noise-floor recalibration during power-save: sampling was previously
skipped entirely while duty-cycling, freezing int.thresh interference
detection at whatever the floor was when power-save turned on. Now
borrows a brief continuous-RX window once a minute to take a fresh
reading before re-arming duty-cycle.
- GPS duty-cycling (Settings > System > "GPS pwr"): cycles GPS off between
fixes instead of running it continuously. Each wake waits for a fix
(capped at 60s) before sleeping again for the configured interval.
Repurposes the long-dead NodePrefs::gps_interval byte rather than adding
a new persisted field. A "is anything live using GPS right now" hold in
UITask keeps GPS continuously on whenever trail recording, live-share,
an armed Locator, or the Compass/Nearby-navigate view actually need a
live fix, so none of those features degrade. Locator crossing-state is
reset on each wake so a still-settling first fix can't read as a false
geofence crossing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Port the Wio Tracker L1 solo firmware (full on-device UI, dual BLE/USB
companion transport) to Heltec V3 and V4 OLED boards. Neither board has
a joystick or CardKB on-board, so each new env wires up both as optional
peripherals with default pins from what the board leaves free, gated
behind the existing UI_HAS_JOYSTICK/ENV_PIN_SDA+SCL flags.
DUAL_SERIAL was nRF52-only; added an ESP32 helpers/esp32/DualSerialInterface.h
counterpart so the flag isn't silently ignored on these boards. On V4's
native USB CDC, isClientConnected() also honours (bool)Serial (real DTR),
same as the nRF52 version; V3 has no native CDC so it stays BLE-only there.
Screen (SDA 17/SCL 18) and CardKB (SDA 3/SCL 4) confirmed working on real
V4 hardware.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The text preview was the last part of the keyboard still working in bytes
rather than codepoints. cpl is how many characters physically fit on a
line, so dividing byte offsets by it counted every 2-byte Cyrillic/Greek/
accented character as two: lines held half the text they had room for, and
a break could land inside a codepoint. Both display drivers are
permanently single-font, so translateUTF8ToBlocks() passes UTF-8 straight
through -- the truncated sequence reached print() and drew as garbage on
both sides of the break. Line boundaries now walk the buffer with the same
kbUtf8*() helpers insertion/backspace/T9 already use, and the per-line
buffers are sized for a full line of 2-byte characters.
Caps-lock also gets an underline on the shift key: it sets caps too, so
the highlight alone made a one-shot Shift and a held lock indistinguishable
despite capitalising one letter vs. every following one.
Drops UITask::applyFont() -- setSingleFont() is a no-op on both drivers
since they were pinned to misc-fixed, so it did nothing, and use_lemon_font
has had no Settings row for a while. The pref itself stays: it's part of
the on-disk layout. Retires the matching stale rationale on scriptHint().
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Compact mode (Settings > Keyboard's "Ext. KB" row) is meant to guarantee
operation with no joystick at all, but it was still half-tied to the
on-screen grid it hides:
- arrows now move the text cursor directly instead of a grid selection
nobody can see, and Tab opens the placeholder picker directly instead of
the row/col-dependent Hold-Enter dispatch
- plain Enter submits the field (there's no grid cell to have deliberately
landed on), same as Fn+Enter
- Fn+letter's accent popup no longer gates on the grid's script/T9
settings -- CardKB always types plain Latin regardless of them, so the
gate only made the gesture silently stop working
- the whole status line is gone: nothing it showed (script, T9-vs-ABC,
caps) is actionable from an external keyboard. The freed height goes to
message-preview lines, floored at the smallest grid's footprint so
cursor mode's own hint block still fits
- the accent popup gets a fixed slot instead of anchoring on a `row` that
is never deliberately navigated to in this mode
Also fixes a text-corrupting invariant break: moveCursorDirect() and
openPlaceholders() move the cursor without finalizing a pending T9
multi-tap cycle, so a later tap on the same cell within the timeout
overwrote an unrelated character. Every other cursor-moving path already
cleared it.
Fn+Tab is dropped as a separate shortcut -- plain Tab already covered
every case it did. Fn+Enter no longer reads as a dead key in cursor mode.
Direct typing moves into insertTyped(), one translation point documenting
what a future relabelled-keycap layout (Cyrillic/Greek) would need.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- DM/room unread badges could claim messages the ring no longer held
(same class as the channel fix in 6470afaf, not covered by it):
getDMUnread()/getDMUnreadTotal() now clamp to dmHistCountForContact(),
and a new reconcileDMUnread() (called once per loop()) frees any
_dm_unread_table slot whose ring occupancy has dropped to 0, so a
17th sender isn't starved by stale entries. onContactRemoved() now
also clears _dm_unread_table -- the one per-contact table it was
missing.
- Shift didn't capitalise ł/ń/ź/ż (+ĺ/ľ/ň/ž): the Latin Extended-A
case-pairing rule assumed a single parity for the whole block, but it
flips around the unpaired codepoints ĸ/ʼn/Ÿ. Fixed with four
sub-ranges, verified exhaustively over U+0100-U+017F.
- Triple-click could still toggle the buzzer while locked on
PIN_USER_BTN/PIN_USER_BTN_ANA boards (joystick path already guarded
this).
- millis() wraparound: 4 absolute comparisons in UITask.cpp (battery
poll, auto-off, lock-wake, backlight) converted to the existing
(int32_t)(millis()-deadline)>=0 idiom; MyMeshBot.h's DM-throttle
eviction now picks the oldest slot by elapsed time instead of raw
t_ms, which picked the wrong slot right after a rollover.
- Long-press bypassed checkDisplayOn() on all 5 call sites -- neither
woke the display nor extended auto-off, and could deliver
KEY_CONTEXT_MENU to the invisible screen. Moved the gate inside
handleLongPress() itself instead of patching each site.
- CardKB's backspace/printable-insert branches didn't reset t9_cell,
so typing right after a T9 cycle tap could get silently overwritten
by a same-cell re-tap within the T9 timeout.
- buildContactList()'s counts[MAX_CONTACTS] was a 1400 B int array on
the 4 KB loop() stack; values are bounded by DM_HIST_MAX (32), so
now uint8_t.
- ACK table treated ack==0 as a wildcard: isAckPending(0) matched any
free slot, and processAck() with an all-zero ACK matched the first
free slot and returned its stale contact pointer. Both now skip/reject
ack==0, and the matched slot's contact pointer is cleared alongside
its ack hash.
- ensurePageOrderInit() could write one byte past page_order[13] when
migrating a saved order with all 13 slots full and CLOCK last --
guarded on insert_at < PAGE_ORDER_LEN.
Two findings from the same review were resolved as no-op decisions,
not code changes: !buzz over DM ignoring quiet hours is intentional
(the pull exemption is meant to cover the buzzer), and the offline
queue's full-queue drop-newest behaviour is upstream code, left alone.
Build-verified green on WioTrackerL1_companion_solo_dual (RAM 71.1%,
Flash 66.6%) and WioTrackerL1Eink_companion_solo_dual (RAM 73.0%,
Flash 67.9%).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Post-review cleanups, no behaviour change:
- botScanCommands() parsed the command name and its two args with three
near-identical read-token loops; extracted a single readToken() lambda.
- Fn+Esc lock branch turned the display on twice (the unlock arm repeated
what the branch head already did); dropped the redundant call.
- setGpioMode()'s comment said "Cycle" (cycling lives in GpioScreen); now
describes what it actually does — set a specific mode + persist.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Bot Actions (!buzz/!gps/!advert/!gpio1-4) ran their side effect
immediately during botScanCommands(), before quiet-hours/cooldown/
per-contact throttle were checked -- those gates only suppressed the
reply text, not the actual buzz/GPS toggle/advert/pin write. botCommandReply()
now only records what was requested; applyPendingBotActions() runs the
deferred effects once a wrapper's throttle checks pass and the ack sent,
mirroring the existing _locfix_requested pattern. resetPendingBotActions()
clears everything on every throttled/aborted path.
- CardKB's Fn+<letter> accent-popup shortcut bypassed the locked-input gate
(it called into KeyboardWidget directly instead of through the
enqueueKey()/dequeue path every other key uses, so it wasn't discarded
while _locked). Now checks _locked itself.
- Since a locked device now correctly ignores CardKB entirely, Fn+Esc
(single press) is added as CardKB's own lock/unlock gesture -- otherwise
a CardKB-only setup had no way to unlock. Esc rather than the adjacent
Fn+Backspace, to avoid an accidental press.
- botScanCommands() now parses up to two arguments per command instead of
one. Used by "!gps fix [seconds]" to override the default 90s timeout
(clamped 15-300s) for a poor sky view where 90s isn't always enough to
reach isLocFixReady()'s HDOP/satellite bar.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
CardKB is level-triggered (repeats the held byte every poll) and its Enter
key collided with the on-screen keyboard grid's own commit action, causing
duplicate characters and accidental message sends. Debounce polling and use
the CardKB v1.1 Fn modifier (confirmed working on real hardware) instead of
tracking navigation state: plain Enter now behaves like the physical centre
button, Fn+Enter submits, Fn+Tab opens the Hold-Enter equivalent, and
Fn+<letter> opens that letter's accent popup directly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-detected at boot on Wire1/Grove (addr 0x5F) -- no setting to flip, and a
no-op on boards without that bus or with nothing attached. This UI's key
codes (KEY_LEFT/UP/DOWN/RIGHT/ENTER/CANCEL) already match CardKB's own byte
protocol, so most input needs zero translation and flows through the same
key queue as physical buttons.
Two bytes get remapped in UITask::pollCardKB():
- Enter, only when the on-screen keyboard's plain grid state is active (no
placeholder/accent popup, not in cursor-mode), becomes a new KEY_KB_ENTER
sentinel meaning "submit the field" -- reusing plain KEY_ENTER there would
insert a stray character, since a CardKB typist's row/col never reflect an
intentional grid selection. Everywhere else Enter is untouched, so
selecting a placeholder or committing an accent still works normally.
- Tab (otherwise unused) becomes KEY_CONTEXT_MENU, standing in for the
"Hold-Enter" long-press gesture CardKB has no way to produce -- without it,
~30 context menus across the UI (message reply/navigate, Bot/Admin/
Repeater, ...) would be unreachable from the keyboard alone.
KeyboardWidget gains a direct-typing path: printable ASCII inserts straight
at the cursor bypassing the grid, Backspace deletes, KEY_KB_ENTER submits.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean; also
smoke-tested Heltec_mesh_solar_companion_radio_ble (no ENV_PIN_SDA/SCL) to
confirm zero regression on boards without the feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
UITask::newMsg() (fired for every incoming DM/channel message) triggers a
3s "Msg: <sender>" overlay drawn on top of whatever screen is current --
including the shared KeyboardWidget when it's occupying the full screen
for text entry (message compose, room/repeater password, channel name,
device name, admin custom command, ...). A message arriving mid-typing
blanked out the letter grid for the full 3s with no way to see what was
being typed.
KeyboardWidget now tracks whether it was actually rendered this frame
(_visible, set at the top of render(), cleared by the new beginFrame()).
UITask's render loop calls _kb.beginFrame() before curr->render() and
skips the alert overlay when the keyboard turned out to be what got
drawn -- covers every screen that shares _kb, not just message compose.
The alert itself is unaffected (still fires, still expires after 3s) --
it just doesn't draw over the keyboard.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Renamed the vestigial Lemon/default font-switch naming (setLemonFont/
isLemonFont/drawLemonChar/lemonXAdvance/_use_lemon -> setSingleFont/
isSingleFont/drawGlyph/glyphXAdvance/_single_font) across DisplayDriver.h
and both concrete drivers -- both have been permanently single-font for
several commits, so the old names invited a future reader to think a
real switch still existed. Pure identifier rename, no logic changed.
Also extracted the byte-identical "SenderName: " prefix-splitting in
MyMeshBot.h's tryBotReplyChannel()/tryBotChannelCommand() into a shared
botChannelSenderSplit(), mirroring the existing botRoomSenderName().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- GxEPDDisplay now uses the same single misc-fixed 6x9 font as the OLED
driver (Lemon retired there too), with baseline math updated for the
new ascent.
- Clock Tools' Alarm screen: Repeat and Armed now respond to LEFT/RIGHT
like every other multi-value/toggle field in Settings, not Enter-only;
Hour/Minute merged into one Time row edited with a hand-rolled HH:MM
digit cursor (like the Timer's), replacing the two-row DigitEditor
popups; Repeat's "Off" label now matches the codebase-wide ON/OFF
casing.
- Top status bar: battery icon now shares the same box height as the
other status icons (Bluetooth/mute/etc.) instead of standing 2px
taller, and its charge nub is properly vertically centred instead of
drifting off-centre at non-multiple-of-4 box heights.
- Small settings-gear icon glyph tweak; wio-tracker-l1 screenshot build
variant now enables DUAL_SERIAL.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
renderBatteryIndicator() drew the secondary icons in a fixed sequence, so a busy
bar (many background modes on) shrank the node-name area to a couple of ellipsised
characters. Rework it into a priority-ordered list laid out right->left with a
reserved minimum name width: once an icon won't fit above the reserve, every
lower-priority icon after it is dropped too.
Priority: BT > GPS fix > alarm > mute > auto-advert > trail > live-share > repeater
(battery stays rightmost). Blinking icons still reserve their slot while off, so
the name width doesn't flicker with the blink. Also -39 lines (eight if-blocks
collapse to one table + loop).
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Recent adverts carousel page was a read-only name+age list of recently-heard
nodes — now covered by the Nodes screen (which folds getRecentlyHeard() non-contacts
into its list). Remove it from the UX:
- isPageVisible() hard-hides HomePage::RECENT, so it drops out of the carousel for
everyone (default and custom page orders, existing users included).
- Delete the dead RECENT render block, the nav "Recent adverts" alert and the unused
AdvertPath recent[] member.
- Drop HOME_RECENT from Settings > Home Pages so there's no dead toggle.
HPB_RECENT bit index is left intact, so persisted page_order / home_pages_mask stay
valid (a stored RECENT entry is simply skipped) — no migration, no schema bump.
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
UI-polish trio from CODE_REVIEW (biggest "feels finished" gain per line):
- Pill unread badges: new DisplayDriver::drawUnreadBadge()/unreadBadgeWidth()
draw a filled capsule with the count knocked out (corners knocked back for a
rounded look; inverts on a selected row). Replaces the bare right-aligned
digits in MODE_SELECT, the contact/channel pickers and favourites tiles.
No <stdio.h> in the header — fmtBadgeCount formats manually, clamps to 99+.
- Unified DM/CH history headers: DM_HIST and CHANNEL_HIST drew their titles by
hand (drawTextCentered + fillRect at lh+1), a different height/separator than
every other screen. Both now route through drawCenteredHeader().
- Trimmed default home carousel: new NodePrefs::HP_DEFAULT (Clock, Tools,
Shutdown, Favourites, Map; Messages + Settings always visible = 7 pages).
applyDefaults() seeds it instead of HP_ALL. Recent/Radio/BT/Advert/GPS/Sensors
are opt-in via Settings > Home Pages. Existing users keep their saved mask —
factory default only; no migration, no schema bump.
Both solo envs build green (OLED RAM 69.9%/Flash 62.8%; e-ink SUCCESS).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A full (non-partial) refresh on every screen change (638eea7b) turned out to be
far too aggressive on real e-ink hardware: every navigation black-flashes,
which is worse than the ghosting it was clearing. Remove the whole mechanism —
DisplayDriver::forceFullRefresh() virtual, GxEPDDisplay's _force_full flag and
override, the endFrame() branch, and the setCurrScreen() call. E-ink is back to
interval-only full refreshes (Settings > Full refresh interval).
The favourites "(gone)"-tile prune that shipped in the same commit is kept.
Builds green: WioTrackerL1Eink_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two duplications surfaced by a framework-consistency pass:
- KeyboardWidget applied the a-z shift-uppercase at five draw/commit sites
with an inline `if (caps && ch >= 'a' && ch <= 'z')`. Fold them into one
`kbApplyCaps(ch, caps)` helper.
- The favourites grid drew the empty "+" tile from two branches (the gone-slot
prune and the always-empty slot). Route both through a single `has_contact`
flag so the "+" and the trailing selection-colour reset each live at one site.
No behaviour change. Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The favourites render already continues on !found (gone-slot prune), so the
badge block only runs when found is true. The if(found) guard around the
unread-badge lookup was always true — remove it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UI quick wins from the 2026-07-05 review:
- E-ink: force a full (non-partial) refresh on the first frame of a new
screen. Inter-screen ghosting was the most visible cheap win — the
N-partials interval alone doesn't catch navigation. New
DisplayDriver::forceFullRefresh() (no-op on OLED), set in setCurrScreen()
and consumed by GxEPDDisplay::endFrame().
- Favourites: clear a stale "(gone)" tile at render time so it reverts to an
empty "+" slot. Happens when prefs outlive the contact list (e.g. a wiped
/contacts3); onContactRemoved only catches a live delete. Pruned slots are
persisted once per pass (self-healing — an emptied slot can't re-fire).
Builds green: WioTrackerL1_companion_solo_dual (OLED),
WioTrackerL1Eink_companion_solo_dual (e-ink).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Losing the whole route on a low-battery auto-shutdown was the worst solo-mode
failure. New NodePrefs::trail_autosave_lowbatt toggle (Tools > Trail >
Settings > Auto-save, default OFF): UITask::shutdown() writes the live trail
to /trail when the toggle is on and _trail.count() > 0. The count guard stops
an empty trail from wiping a previously saved one; it overwrites the same
/trail file the manual Trail > Save uses.
Schema bumped 0xC0DE001A -> 0xC0DE001B: append-only tail field with a load
clamp, so pre-0x1B saves default to off. sizeof(NodePrefs) is unchanged (the
byte fits existing padding after keyboard_type), so the tripwire assert stays
2496.
Builds green: WioTrackerL1_companion_solo_dual (RAM 69.9%, Flash 62.8%).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- locked device: a ringing alarm/timer was invisible — wakeForAlarm() now
holds the lock wake window for the whole ring, the lock screen draws the
alert overlay, and a key-dismissed ring falls back to a 5 s glance
- status bar: A / live-share / trail / repeater icons no longer vanish when
Bluetooth is off (moved outside the isSerialEnabled() gate)
- alert overlay: long text wraps to up to 3 lines inside the box instead of
overflowing the border (new UITask::renderAlertOverlay, shared with lock)
- MyMesh: force NUL on contact.name copied from an app frame (unterminated
name could overrun the AdvertPath strcpy)
- clock tools: ring/timer deadline compares now wrap-safe (signed diff),
matching the trail/loc-share timers
- messages: channel context menu freezes its target channel at open; fav
toggle no longer retargets the menu when the fav-only filter drops the row
All three solo envs build green (WioTrackerL1 OLED/Eink, GAT562-30S).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
JakubandClaude Sonnet 5
tchellow
MarekZegare4
liamcottle
Scott Powell
Florent
Quency-D
Kevin Le
Marcin MarczykandGitHub