Continuing the consistency review: sweep for the same three defect shapes
elsewhere in ui-new/ (own read pass plus two parallel research agents),
verified against source before acting.
Three destructive actions fired on a single Enter with no way back, unlike
contact-delete's existing confirm-defaulted-to-Cancel popup: Trail's "Reset
trail" (wipes the whole recorded route, no undo short of a prior manual
Save -- reuses Trail's own multi-level menu machinery, alongside its
GPS-off confirm), Messages' channel Delete, and RadioPresetPicker's saved-
preset delete (shared by Settings > Radio and Tools > Repeater, so one fix
covers both). All three now confirm the same way, defaulting to Cancel.
KeyboardWidget was the one place Hold-Enter still doubled as Cancel: Shift,
Backspace and a Latin letter's accent popup already have real, kept
meanings under a hold, but every other special-row cell (Space, OK/Done,
the {} placeholder) fell through to a bare CANCELLED, closing the keyboard
exactly like the real Cancel key. Now a no-op there too, matching the "only
Back closes it" rule already applied to popups and screens.
MessagesScreen defined the same two label arrays (Notif states, melody
slots) four times over, once per context-menu handler. Hoisted to one
pair of static class members -- constexpr wasn't enough to get the linker
to emit them on this toolchain, so they follow the same declare-in-class/
define-out-of-class shape NearbyScreen::FILTER_LABELS already uses.
Alert text: "Advert sent!"/"Advert failed.." and "Sent!" were the only
toasts anywhere with trailing punctuation; normalized to the plain style
every other confirmation uses. Unpinning from the Favourites Dial reported
the freed slot number from the Messages screens but not from Nodes or the
dial's own tile menu; now consistent everywhere pinning already was.
DiagnosticsScreen's Live/System/Font tab renderers hand-rolled the same
scroll-clamp/loop/indicator skeleton drawList() already bundles; switched
both to drawList (passing the screen's own _scroll as its `sel` too, since
neither tab has a row cursor -- makes drawList's internal clamp a no-op and
leaves clampScroll() as the only thing bounding it, unchanged). Pure
internal tidy, no behavior change.
Follow-up review of f589b9b2 -- five defects in that commit's own changes.
- repeat_scope_only + repeat_extra_scopes were read/written in the MIDDLE of
the prefs stream, beside their repeat_* siblings. loadPrefsInt()'s rd() is a
plain sequential reader gated only on file.available(), with no per-field
versioning, so on any pre-existing file those 25 bytes were taken from the
fields that follow, shifting EVERY later field: repeater profile (incl. a
float freq), track_shared_loc, all of loc_share_*, trail, bot, GPIO modes.
Moved to the struct/file tail, sentinel bumped to 0xC0DE0027 with 0xC0DE0026
marked burned. sizeof stays 2752 (confirmed by build); the tripwire procedure
now spells out the append-only rule that "in struct order" left implicit.
- rebuildRepeatScopes() called getAutoKeyFor() with id 0 for every entry, but
that cache is keyed on the id alone and ignores the name on a hit -- so every
extra scope after the first silently got the first one's key, making the
comma-separated list do nothing. Distinct id per scope now.
- interference_threshold had no load clamp, so an upgrader read 0x23 (35) out
of the old file's sentinel tail instead of 0.
- CMD_SET_DEFAULT_FLOOD_SCOPE wrote default_scope_key without rebuilding the
relay filter, so setting or clearing the scope from the app left the repeater
filtering on the previous key until reboot. The on-device path already did.
- The keyboard preview derived the cursor's row a second time from byte
offsets, disagreeing with the cursor_line the scroll window already computes:
it pinned the cursor to the end of a full line (drawing '_' one character
past the display width) at every wrap boundary. Use cursor_line directly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Settings > Radio > Scope: type a community/region name on-device (derives
the shared key the same "#name" -> SHA256 way as DEFAULT_FLOOD_SCOPE_NAME),
previously only settable from a connected app.
- Tools > Repeater > Scope only + Extra scopes: only relay flood traffic
matching the device's own scope or a comma-separated list of additional
scopes, without changing what scope the device's own messages send under.
No-op while unconfigured.
- getCADEnabled()/getInterferenceThreshold() were hardcoded off on
companion_radio; CAD now auto-enables whenever RX power-save (duty-cycle)
is active, since the noise floor isn't kept fresh during duty-cycle sleep.
- Message truncation to fit the send frame could split a multi-byte UTF-8
character in half; now stops at the last complete character.
- The default "Public" channel was unconditionally re-added at every boot
before the saved channel list was loaded, so deleting it never stuck.
Only seeded now on a genuinely fresh device (no channel file yet).
- Tools > Nodes read contacts from the wrong starting offset, landing on
internally-reserved bookkeeping slots instead of real contacts -- showed
as blank "Unknown" rows and silently dropped that many real contacts off
the end of the list.
- resetContacts() only cleared the first few reserved slots, not the whole
contact table, contrary to its own comment; only reachable today via
private-key import, fixed to match stated intent regardless.
- Keyboard's multi-line text preview could render the cursor on an empty
line below short typed text instead of right after it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The text preview was the last part of the keyboard still working in bytes
rather than codepoints. cpl is how many characters physically fit on a
line, so dividing byte offsets by it counted every 2-byte Cyrillic/Greek/
accented character as two: lines held half the text they had room for, and
a break could land inside a codepoint. Both display drivers are
permanently single-font, so translateUTF8ToBlocks() passes UTF-8 straight
through -- the truncated sequence reached print() and drew as garbage on
both sides of the break. Line boundaries now walk the buffer with the same
kbUtf8*() helpers insertion/backspace/T9 already use, and the per-line
buffers are sized for a full line of 2-byte characters.
Caps-lock also gets an underline on the shift key: it sets caps too, so
the highlight alone made a one-shot Shift and a held lock indistinguishable
despite capitalising one letter vs. every following one.
Drops UITask::applyFont() -- setSingleFont() is a no-op on both drivers
since they were pinned to misc-fixed, so it did nothing, and use_lemon_font
has had no Settings row for a while. The pref itself stays: it's part of
the on-disk layout. Retires the matching stale rationale on scriptHint().
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Compact mode (Settings > Keyboard's "Ext. KB" row) is meant to guarantee
operation with no joystick at all, but it was still half-tied to the
on-screen grid it hides:
- arrows now move the text cursor directly instead of a grid selection
nobody can see, and Tab opens the placeholder picker directly instead of
the row/col-dependent Hold-Enter dispatch
- plain Enter submits the field (there's no grid cell to have deliberately
landed on), same as Fn+Enter
- Fn+letter's accent popup no longer gates on the grid's script/T9
settings -- CardKB always types plain Latin regardless of them, so the
gate only made the gesture silently stop working
- the whole status line is gone: nothing it showed (script, T9-vs-ABC,
caps) is actionable from an external keyboard. The freed height goes to
message-preview lines, floored at the smallest grid's footprint so
cursor mode's own hint block still fits
- the accent popup gets a fixed slot instead of anchoring on a `row` that
is never deliberately navigated to in this mode
Also fixes a text-corrupting invariant break: moveCursorDirect() and
openPlaceholders() move the cursor without finalizing a pending T9
multi-tap cycle, so a later tap on the same cell within the timeout
overwrote an unrelated character. Every other cursor-moving path already
cleared it.
Fn+Tab is dropped as a separate shortcut -- plain Tab already covered
every case it did. Fn+Enter no longer reads as a dead key in cursor mode.
Direct typing moves into insertTyped(), one translation point documenting
what a future relabelled-keycap layout (Cyrillic/Greek) would need.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- DM/room unread badges could claim messages the ring no longer held
(same class as the channel fix in 6470afaf, not covered by it):
getDMUnread()/getDMUnreadTotal() now clamp to dmHistCountForContact(),
and a new reconcileDMUnread() (called once per loop()) frees any
_dm_unread_table slot whose ring occupancy has dropped to 0, so a
17th sender isn't starved by stale entries. onContactRemoved() now
also clears _dm_unread_table -- the one per-contact table it was
missing.
- Shift didn't capitalise ł/ń/ź/ż (+ĺ/ľ/ň/ž): the Latin Extended-A
case-pairing rule assumed a single parity for the whole block, but it
flips around the unpaired codepoints ĸ/ʼn/Ÿ. Fixed with four
sub-ranges, verified exhaustively over U+0100-U+017F.
- Triple-click could still toggle the buzzer while locked on
PIN_USER_BTN/PIN_USER_BTN_ANA boards (joystick path already guarded
this).
- millis() wraparound: 4 absolute comparisons in UITask.cpp (battery
poll, auto-off, lock-wake, backlight) converted to the existing
(int32_t)(millis()-deadline)>=0 idiom; MyMeshBot.h's DM-throttle
eviction now picks the oldest slot by elapsed time instead of raw
t_ms, which picked the wrong slot right after a rollover.
- Long-press bypassed checkDisplayOn() on all 5 call sites -- neither
woke the display nor extended auto-off, and could deliver
KEY_CONTEXT_MENU to the invisible screen. Moved the gate inside
handleLongPress() itself instead of patching each site.
- CardKB's backspace/printable-insert branches didn't reset t9_cell,
so typing right after a T9 cycle tap could get silently overwritten
by a same-cell re-tap within the T9 timeout.
- buildContactList()'s counts[MAX_CONTACTS] was a 1400 B int array on
the 4 KB loop() stack; values are bounded by DM_HIST_MAX (32), so
now uint8_t.
- ACK table treated ack==0 as a wildcard: isAckPending(0) matched any
free slot, and processAck() with an all-zero ACK matched the first
free slot and returned its stale contact pointer. Both now skip/reject
ack==0, and the matched slot's contact pointer is cleared alongside
its ack hash.
- ensurePageOrderInit() could write one byte past page_order[13] when
migrating a saved order with all 13 slots full and CLOCK last --
guarded on insert_at < PAGE_ORDER_LEN.
Two findings from the same review were resolved as no-op decisions,
not code changes: !buzz over DM ignoring quiet hours is intentional
(the pull exemption is meant to cover the buzzer), and the offline
queue's full-queue drop-newest behaviour is upstream code, left alone.
Build-verified green on WioTrackerL1_companion_solo_dual (RAM 71.1%,
Flash 66.6%) and WioTrackerL1Eink_companion_solo_dual (RAM 73.0%,
Flash 67.9%).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add Settings > Keyboard "Ext. KB" row (boards with a CardKB-capable I2C
bus only): switching it to Compact hides the letter grid and special-row
icons in favour of a one-line status (script/page, caps) plus a Fn-shortcut
reminder, since an external-keyboard typist never looks at the on-screen
grid. Accent/placeholder popups still render as before. Off by default.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
CardKB is level-triggered (repeats the held byte every poll) and its Enter
key collided with the on-screen keyboard grid's own commit action, causing
duplicate characters and accidental message sends. Debounce polling and use
the CardKB v1.1 Fn modifier (confirmed working on real hardware) instead of
tracking navigation state: plain Enter now behaves like the physical centre
button, Fn+Enter submits, Fn+Tab opens the Hold-Enter equivalent, and
Fn+<letter> opens that letter's accent popup directly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-detected at boot on Wire1/Grove (addr 0x5F) -- no setting to flip, and a
no-op on boards without that bus or with nothing attached. This UI's key
codes (KEY_LEFT/UP/DOWN/RIGHT/ENTER/CANCEL) already match CardKB's own byte
protocol, so most input needs zero translation and flows through the same
key queue as physical buttons.
Two bytes get remapped in UITask::pollCardKB():
- Enter, only when the on-screen keyboard's plain grid state is active (no
placeholder/accent popup, not in cursor-mode), becomes a new KEY_KB_ENTER
sentinel meaning "submit the field" -- reusing plain KEY_ENTER there would
insert a stray character, since a CardKB typist's row/col never reflect an
intentional grid selection. Everywhere else Enter is untouched, so
selecting a placeholder or committing an accent still works normally.
- Tab (otherwise unused) becomes KEY_CONTEXT_MENU, standing in for the
"Hold-Enter" long-press gesture CardKB has no way to produce -- without it,
~30 context menus across the UI (message reply/navigate, Bot/Admin/
Repeater, ...) would be unreachable from the keyboard alone.
KeyboardWidget gains a direct-typing path: printable ASCII inserts straight
at the cursor bypassing the grid, Backspace deletes, KEY_KB_ENTER submits.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean; also
smoke-tested Heltec_mesh_solar_companion_radio_ble (no ENV_PIN_SDA/SCL) to
confirm zero regression on boards without the feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
UITask::newMsg() (fired for every incoming DM/channel message) triggers a
3s "Msg: <sender>" overlay drawn on top of whatever screen is current --
including the shared KeyboardWidget when it's occupying the full screen
for text entry (message compose, room/repeater password, channel name,
device name, admin custom command, ...). A message arriving mid-typing
blanked out the letter grid for the full 3s with no way to see what was
being typed.
KeyboardWidget now tracks whether it was actually rendered this frame
(_visible, set at the top of render(), cleared by the new beginFrame()).
UITask's render loop calls _kb.beginFrame() before curr->render() and
skips the alert overlay when the keyboard turned out to be what got
drawn -- covers every screen that shares _kb, not just message compose.
The alert itself is unaffected (still fires, still expires after 3s) --
it just doesn't draw over the keyboard.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Page 0 was hardcoded to Latin -- Cyrillic/Greek could only ever be the
second, cycled-to page. Settings > Keyboard's Alphabet row splits into
Main (which script the keyboard opens on by default) and Additional
(the second one reached via #@/abc), so a Cyrillic/Greek typist can make
their own script the default instead of always landing on Latin first.
Setting Additional equal to Main collapses back to a 2-page cycle (that
script + Symbols), same rule the old Latin-hardcoded design already used
implicitly.
KeyboardWidget.h: cellStr()/t9GroupStr() now dispatch through
scriptCellStr()/scriptT9GroupStr(), treating Latin as an ordinary peer of
Cyrillic/Greek instead of a special case; scriptHint() replaces
altAlphabetHint() so the #@/abc key's "next page" hint is correct
regardless of which script that lands on; the accent popup's gating
checks the current page's actual script instead of assuming page 0 is
always Latin. Removed the now-dead pageIsAltAlphabet().
NodePrefs gains keyboard_main_alphabet (schema sentinel 0xC0DE001F ->
0xC0DE0020, same append-at-tail/clamp-on-load pattern as every prior
schema growth this file uses). Verified via a real build that the new
field lands in existing tail padding -- sizeof(NodePrefs) is unchanged
at 2712.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the 8 separate Latin-diacritic alt-alphabet pages (Polish, Czech,
Slovak, German, French, Spanish, Portuguese, Nordic) with one popup: Hold
Enter on a Latin letter that has accented variants (a c d e i l n o r s
t u y z) opens a floating horizontal strip of that letter's accents,
anchored over its own row so the grid stays visible underneath (LEFT/
RIGHT picks, Enter inserts via a new shared insertGlyph() helper, Cancel
dismisses). Holding a letter with no variants is a no-op. Cyrillic/Greek
remain full alt-alphabet pages; NodePrefs::keyboard_alt_alphabet shrinks
from 11 to 3 values accordingly -- an old saved Polish..Nordic value just
clamps to Latin via DataStore.cpp's existing range check, no migration
code needed.
Freeing Hold-Enter on letter cells required moving cursor-mode's own
trigger: UP from the top letter row now enters it instead of wrapping to
the special row. To keep that wrap reachable, cursor mode's UP/DOWN
(Home/End) continue the wrap once already at that boundary -- UP again
lands on the special row, DOWN again back on the letter grid -- reusing
the same proportional column mapping the old direct wrap used.
Diagnostics' font-coverage sample swaps its 8 per-language lines for one
line sampling the new accent table. Docs (message_screen, settings_screen,
solo_ui_framework) and release-notes updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- MessagesScreen: shrink message boxes to fit content and anchor them
right (outgoing) / left (incoming), like typical messengers; move
the [+ send] compose button to the right edge to match; fix its
frame margins (no descenders in the label made the symmetric padding
look uneven) and reclaim the freed 2px for the message list.
- KeyboardWidget: add Hold-Enter cursor-positioning mode (LEFT/RIGHT
move, UP/DOWN jump to start/end, Enter/Cancel exit) with a visual
"CURSOR MODE" indicator, so edits and inserts can target any point
in the typed text instead of always the end.
Message history (DM + channel) now stacks bubbles upward from the compose
row instead of the header, so the newest message sits at the bottom like
a typical messenger, with older messages progressively above. UP/DOWN and
the scrollbar direction are swapped to match; the newest bubble now keeps
the same breathing-room gap against the compose row as it does against
another bubble, instead of touching it.
Keyboard: Shift is one-shot by default (capitalises just the next
letter, then reverts), with Hold-Enter on Shift toggling a persistent
caps-lock for the old sticky behavior. Hold-Enter on Backspace clears
the whole field in one action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replace the Lemon/default font-switch with a single misc-fixed 6x9 font
(full Latin/Greek/Cyrillic coverage), generated via a new tools/bdf2gfx.py
BDF-to-GFX converter. Removes the keyboard's per-render font-switch
workarounds now that one font fits its cell cleanly.
DiagnosticsScreen becomes a circular tab carousel (Live / System / Font),
adding a firmware+device+radio info tab and a per-alphabet rendering test
card covering every keyboard language.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
Two duplications surfaced by a framework-consistency pass:
- KeyboardWidget applied the a-z shift-uppercase at five draw/commit sites
with an inline `if (caps && ch >= 'a' && ch <= 'z')`. Fold them into one
`kbApplyCaps(ch, caps)` helper.
- The favourites grid drew the empty "+" tile from two branches (the gone-slot
prune and the always-empty slot). Route both through a single `has_contact`
flag so the "+" and the trailing selection-colour reset each live at one site.
No behaviour change. Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
T9 keys now read like a phone keypad — each cell is labelled <digit><group>
(e.g. 2abc), with the digit matching what the multi-tap cycle lands on after
the letters. No separator space: the widest group (".,!?'-") plus the digit
already fills a narrow 128px OLED cell at 3 columns.
Also fills in the v1.22 release notes (T9 keyboard, trail auto-save, Clock
Tools in Tools, Map/Shutdown reorderable, battery-read fix, the UI-audit fix
batch, discover-dedup, favourites self-heal, preset-name placeholder, OLED
frame-skip, e-ink full-refresh) and syncs the solo-feature docs: new Keyboard
settings section, Trail Auto-save row, and Clock Tools reachable from Tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The on-screen keyboard grid has been a-b-c...z alphabetical order since
it was first introduced, never an actual QWERTY row layout. The
"QWERTY" name only appeared with the T9 option (needed something to
contrast it against) and was inaccurate from the start.
Trail map dots/diamonds/cross/start markers and the north indicator were
drawn as raw unscaled pixels, so they shrank to near-invisible specks on
landscape e-ink's larger font scale; they now route through the mini-icon
framework (icons.h) like the rest of the UI, and the grid intersection dots
scale with it too. The keyboard's preview/grid separator had the same bug
(hardcoded 1px) and now uses display.sepH().
Also makes UP/DOWN (and the keyboard's LEFT/RIGHT/UP/DOWN) wrap top<->bottom
across every list, menu and form selector, matching the behavior PopupMenu
already had.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Unify on the shared keyboard: WaypointsView drives UITask::keyboard()
instead of its own instance; openKb() clears {loc}/{time} for literal
fields (labels, coordinates). Reclaims the duplicate widget from the heap.
- Icon glyphs on the special row: caps ⇧, space ⎵ (two halves), delete ⌫,
OK ✓ (reuses ICON_CHECK); {} and the page toggle stay text.
- Second character page (symbols), toggled by a "#@"/"abc" key. Tidy the
letters page: drop the duplicate grid space, add the comma, group
punctuation as . , ! ?
- Harden the preview buffers (KB_PREVIEW_CAP) against very wide displays.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After widening the history buffers, the compose side was still the
bottleneck: the keyboard capped input at 139 bytes and the quick-message
expand buffers were 140. Raise KB_MAX_LEN to 160 (MeshCore's MAX_TEXT_LEN)
and size the expand/compose buffers to MSG_TEXT_BUF, so a message can be
typed, expanded, sent, stored and displayed at the full protocol length on
every path.
The custom-message editor now passes an explicit max bound to its 140-byte
store, so the wider keyboard buffer can't overflow it; the bot editor
already passed per-field maxima.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Eight screens repeated the same if/else block to invert the row
background for selected items. Add DisplayDriver::drawSelectionRow that
sets LIGHT, optionally fills the rect, and leaves the colour as DARK
when sel (so the caller's text renders inverted). 61 lines removed
across SettingsScreen, KeyboardWidget (cells + special row), ToolsScreen,
DashboardConfigScreen, BotScreen, RingtoneEditorScreen (note slots +
menu), NearbyScreen, QuickMsgScreen (4 list views).
Card-style rows (QuickMsg hist, NearbyScreen discover, RingtoneEditor
notes display) keep their original drawRect/partial-fill outline for
unselected — they don't match the simple-invert pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
KeyboardWidget printed the text preview directly via display.print()
without calling translateUTF8ToBlocks first. When a reply prefix
contained a UTF-8 sender name (e.g. Cyrillic), raw multi-byte sequences
reached the display driver on non-Lemon renders.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- GxEPDDisplay: fontAscender only applies to sz=1 with Lemon; sz=2 (NULL font)
was incorrectly getting a 16px cursor offset, causing clock text to render
16px lower than expected and overlap the date line
- KeyboardWidget: compute cell_h from available screen height instead of lh+1;
tighten sep_y to lh so the grid fits within 122px even with Lemon font (lh=20)
- SettingsScreen renderBar: constrain box size to available width so the 5th
buzzer-volume square doesn't overflow past the right edge with Lemon font
- NearbyScreen discover detail: manually truncate b64 public key by charWidth
to guarantee one-line rendering; use dynamic step = (height-hdr)/5 so
Status line doesn't fall off the bottom of the screen
- NearbyScreen contacts detail: merge dist+az into one line and use dynamic
step to fit 5 lines within the display; removes the off-screen Seen: row
- AutoAdvertScreen: replace lineStep() gap before hints with 4px fixed gap
so both hint lines fit within the display with large fonts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- KeyboardWidget: replace inline placeholder overlay with PopupMenu
- UITask QuickMsgScreen: replace inline CONTACT_PICK/CHANNEL_PICK context
menus with PopupMenu; notif label stored in _ctx_notif_item at open time
- BotScreen: clear placeholder list for trigger field (expansion tokens
would never match incoming literal text)
- MsgExpand: fix APPEND macro off-by-one (oi+_l < out_len-1 → < out_len)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
expandMsg now expands {temp}, {hum}, {pres}, {batt}, {alt}, {lux}, {dist},
{co2} from live sensor readings. The [{}] picker in the on-screen keyboard
shows only sensors currently detected by SensorManager and scrolls when
more than 3 items fit the overlay.
New SensorPlaceholders.h helper keeps sensor-to-keyboard wiring out of
UITask.cpp. MsgExpand.h handles all expansion logic centrally; MyMeshBot
and QuickMsgScreen pass &sensors and batt_volts to each call.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard instances (Settings, QuickMsg, Bot) now show plain
text + cursor without any field-name prefix. Removes the label field
from KeyboardWidget entirely — the screen title already indicates context.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- preview[] increased from 32 to 40 bytes to safely fit max label (15 chars)
+ 20 chars text + cursor + null without snprintf truncation
- KEY_CONTEXT_MENU (long-press ENTER) now treated as CANCEL in keyboard
input handler, restoring BotScreen behavior lost in the refactor
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard implementations (SettingsScreen, QuickMsgScreen, BotScreen)
now share a single KeyboardWidget struct defined in KeyboardWidget.h, eliminating
~480 lines of duplicated render/input logic. Also fixes the SettingsScreen bug
where navigation keys were checked before the placeholder overlay, causing cursor
movement when the overlay was open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Jakub
marcin
MarekZegare4andClaude Opus 4.8