- Move "A" (auto-advert) indicator left of BT "B" in status bar
- Ellipsize node name to fit available width instead of overflowing
- Shrink A and B background rectangles by 1px right, 2px bottom
- Change A blink to 2s on / 2s off at 1000ms refresh rate
- Auto-advert sends GPS position directly via createSelfAdvert/sendZeroHop
- Align Settings and Tools home page titles to y=22, same as Messages
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BT indicator and mute icon were at y=1 (1px below text baseline).
Battery icon height reduced 10→8px to match text height.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Changed ~ to " A" (space + capital A, no inverted background)
- Blink: on 500ms / off 1500ms (once per 2s)
- Home screen refresh rate drops to 500ms when auto-advert is active
so the blink is actually visible
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Blinks at 4Hz (250ms toggle) with inverted background so it's clearly
visible without being distracting.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace getAvailableLPPTypes() (hardware-detected) with a live querySensors()
call so only placeholders for sensors currently returning values appear in
the picker.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Scan does not discover others — it announces our own presence.
Updated labels: "Scan for nodes"→"Send my advert", "SCANNING..."→"ADVERTISING...", "[M]=Scan"→"[M]=Advert".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Detail view now shows "Seen: Xs/Xm/Xh ago" using ContactInfo.lastmod
- Periodic detail refresh exits back to list view if the contact is no
longer in the filtered list (e.g. removed from favourites)
- Rearranged detail layout to fit 6 rows within 64px display
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add "Fav" as first filter category (contacts with flags & 1)
- Show distance and bearing on separate lines in detail view
- Add cardinal direction to bearing: "Az: 245d (SW)"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ping sent empty messages appearing in target's chat history, and RTT
measurement never worked for direct sendMessage() calls. Removed all
ping state machinery and registerExpectedAck(); detail view now shows
node info only (lat/lon/dist/bearing/type).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Direct sendMessage() calls bypass the BT serial handler that populates
expected_ack_table; add registerExpectedAck() to MyMesh and call it from
NearbyScreen so isAckPending() can actually track the outstanding ping.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove gps_lat/lon == 0 filter: screen now shows all contacts
reachable by radio; distance column shows ?GPS when coords unavailable
- Guard haversine: only compute distance when both own AND remote GPS
are valid (prevents bogus distance to 0 N 0 E)
- Fix sort: nodes without GPS (-1) sort to end instead of front
- Rename Chat filter label to Comp, type display to Companion
- Update empty list message to "No contacts found"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stale _ping_ack_seen=true from a previous ping attempt could cause an
immediate PING_OK (with wrong RTT) on the next ping if the new ACK entry
hadn't appeared in the table yet. Reset the flag everywhere _ping_state
is set to PING_IDLE.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Ping: add _ping_ack_seen flag; RTT is measured only after ACK entry
was first confirmed present in the table, preventing false 0ms when
isAckPending() returns false before the entry is registered
- NearbyScreen: replace unsupported degree symbol \xb0 with 'd'
in bearing format ("Dist:1.5km 45d")
- Clock page: hide page indicator dots (already hides node name/battery);
eliminates overlap with size-2 clock text drawn at y=0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BotScreen and DashboardConfigScreen were calling savePrefs() on every
exit regardless of whether any setting changed. Add _dirty flag set only
on actual value changes (toggle, channel select, keyboard confirm,
field cycle), reset on enter().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The #define was inside the private section, after isAckPending() which
references it — preprocessor hadn't seen the symbol yet at that point.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add NearbyScreen: GPS contact list with haversine distance sort,
type filter (ALL/Chat/Rpt/Room/Snsr), detail view with ping (RTT via
ACK poll), node scan via advert(), context menu
- Add DashboardConfigScreen: configure up to 3 data fields on the clock
page (Battery, Temp, Humidity, Pressure, GPS, Altitude, Lux, CO2,
Contacts); entered via long-press ENTER on clock page
- Rework HP_CLOCK layout: full-screen clock (size 2 at y=0), date at
y=19, separator at y=28, three data field rows at y=31/41/51;
hide node name/battery indicator on clock page
- Persist dashboard_fields[3] in NodePrefs and DataStore
- Add isAckPending() to MyMesh for NearbyScreen ping detection
- Wire NearbyScreen into ToolsScreen and UITask
- Reduce NearbyScreen entry buffer from MAX_CONTACTS(100) to 32,
saving ~3.3 KB RAM
- Switch haversine/bearing math from double to float (sinf/cosf/atan2f),
eliminating double libm and saving ~5-10 KB flash
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- KeyboardWidget: replace inline placeholder overlay with PopupMenu
- UITask QuickMsgScreen: replace inline CONTACT_PICK/CHANNEL_PICK context
menus with PopupMenu; notif label stored in _ctx_notif_item at open time
- BotScreen: clear placeholder list for trigger field (expansion tokens
would never match incoming literal text)
- MsgExpand: fix APPEND macro off-by-one (oi+_l < out_len-1 → < out_len)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add PopupMenu.h: generic scrollable overlay with wrap-around nav (up from
first wraps to last, down from last wraps to first), closes on ENTER or
CANCEL/CONTEXT_MENU. Default constructor ensures active=false on creation.
- KeyboardWidget: replace inline placeholder overlay (~50 lines) with PopupMenu
- UITask QuickMsgScreen: replace inline context menus in CONTACT_PICK and
CHANNEL_PICK with PopupMenu; notif label stored in _ctx_notif_item at open time
- BotScreen: clear placeholder list for trigger field (placeholders are
expansion tokens that would never match incoming literal text)
- MsgExpand: fix APPEND macro off-by-one (oi+_l < out_len-1 → < out_len)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
expandMsg now expands {temp}, {hum}, {pres}, {batt}, {alt}, {lux}, {dist},
{co2} from live sensor readings. The [{}] picker in the on-screen keyboard
shows only sensors currently detected by SensorManager and scrolls when
more than 3 items fit the overlay.
New SensorPlaceholders.h helper keeps sensor-to-keyboard wiring out of
UITask.cpp. MsgExpand.h handles all expansion logic centrally; MyMeshBot
and QuickMsgScreen pass &sensors and batt_volts to each call.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Shared struct handles rendering and input for both DM and channel fullscreen
views, replacing ~80 lines of duplicated inline code. Fixes navigation arrow
indicators being swapped in channel fullscreen.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pressing ENTER on a selected DM message now opens a fullscreen view
(matching channel history behavior) instead of going directly to compose.
Fullscreen supports UP/DOWN scrolling for long messages, LEFT/RIGHT to
navigate between messages, and ENTER/CANCEL to return to the list.
Compose is still accessible via [+ send] (ENTER when nothing selected).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard instances (Settings, QuickMsg, Bot) now show plain
text + cursor without any field-name prefix. Removes the label field
from KeyboardWidget entirely — the screen title already indicates context.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- preview[] increased from 32 to 40 bytes to safely fit max label (15 chars)
+ 20 chars text + cursor + null without snprintf truncation
- KEY_CONTEXT_MENU (long-press ENTER) now treated as CANCEL in keyboard
input handler, restoring BotScreen behavior lost in the refactor
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard implementations (SettingsScreen, QuickMsgScreen, BotScreen)
now share a single KeyboardWidget struct defined in KeyboardWidget.h, eliminating
~480 lines of duplicated render/input logic. Also fixes the SettingsScreen bug
where navigation keys were checked before the placeholder overlay, causing cursor
movement when the overlay was open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-press ENTER in the DM contact list opens a context menu with:
- "Mark as read": clears unread counter for that contact
- "Notif: default/OFF/ON": cycles notification state (same as channels)
Notification state is persisted in NodePrefs (dm_notif[16] table,
keyed by 4-byte pub_key prefix). When muted, the buzzer is silenced
for that contact's messages; when force-on, buzzer plays even in
quiet mode. Default follows the global buzzer setting.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When companion app finishes syncing all messages (msgRead(0)),
clear both _dm_unread_table and _ch_unread so indicators match
the app's read state.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add DM_HIST phase in QuickMsgScreen: 32-entry ring buffer tracks incoming
and outgoing DMs per contact; selecting a contact now opens history view
before compose
- Per-contact DM unread badge in contact list (replaces hop count display)
- Bot replies (DM and channel) stored in history so they appear on-screen
- Fix contact index truncation: _sorted was uint8_t (max 255), causing
contacts at indices 256-349 to map to wrong entries; changed to uint16_t
- Add addDMMsg() virtual to AbstractUITask; wire through MyMesh.cpp
- Incoming chat DMs call addDMMsg(); outgoing after successful send too
- msgRead(0) from companion app clears per-contact unread table
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Bot redesign: DM bot active for all private messages (no pubkey filter),
channel bot optional with separate enable flag; both can run simultaneously
- Bot: one shared trigger, separate reply texts for DM and channel
- Buzzer: add Auto mode (mutes when BT connected, unmutes on disconnect);
per-channel force-on overrides still work as intended
- Settings: defer flash writes to menu exit (only when dirty)
- Settings: add Seconds toggle (hide clock seconds, refresh drops 1s→60s)
- Fullscreen msg preview: fix truncation (fmsg buf 79→140 chars)
- RingtoneEditor: fix melody playback cut after first note (RTTTL lib holds
pointer — moved play buffer to member variable)
- BotScreen: remove key hint footer
- .gitattributes: protect README.md from upstream merge conflicts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without the check, a DM-mode bot (bot_target_type==1) would also reply
to channel messages whenever the trigger phrase and channel index happened
to match.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move tryBotReplyDM() and tryBotReplyChannel() implementations to
MyMeshBot.h (included at end of MyMesh.cpp). onMessageRecv and
onChannelMessageRecv now contain only a single-line call each,
minimising the diff against upstream in those methods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move three custom screens out of UITask.cpp into their own .h files
(RingtoneEditorScreen.h, BotScreen.h, ToolsScreen.h) and replace them
with three #include lines. UITask.cpp now only contains screens that
overlap with upstream (SplashScreen, SettingsScreen, QuickMsgScreen,
HomeScreen), making future upstream merges easier — custom screens live
in files that upstream will never touch.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace BotScreen's custom embedded keyboard with the shared global
keyboard layout (KB_* constants): char rows at KB_CHARS_Y, special row
at KB_SPECIAL_Y=48 with 5 buttons ([^][Sp][Del][{}][OK]), fixing the
previous layout that rendered below the 64 px display boundary.
Proportional column scaling between char rows (10 cols) and special row
(5 cols). [{}] opens the placeholder picker overlay.
- Add MsgExpand.h: standalone inline expandMsg() with no framework
dependencies, expanding {loc} and {time} placeholders. Used by both
MyMesh (bot channel/DM replies) and QuickMsgScreen, replacing the
duplicate expandBotMsg() static and the inline expandMsg() method.
- Bump FIRMWARE_VERSION to v1.15.3.
- ToolsScreen: remove key-hint footer line.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ToolsScreen now follows the same rendering convention as QuickMsgScreen
and SettingsScreen: START_Y=12, '>' prefix on selected item, explicit
setColor per item (light fill → dark text for selection).
Bot DM contact picker now filters to favourites-only (flags & 0x01),
consistent with the DM contact list behaviour elsewhere in the UI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The bot can now reply to a specific DM contact instead of a channel.
UI (BotScreen): item 1 cycles through all channels followed by all DM
contacts (ADV_TYPE_CHAT). The label switches between "Channel" / "Contact"
and the value shows the channel or contact name. Left/right/enter navigate
the combined list.
Logic (MyMesh::onMessageRecv): when bot_target_type==1, match the trigger
against incoming DM text and reply via sendMessage(). A 4-byte pubkey
prefix identifies the target; all-zero prefix matches any DM sender.
Persistence: bot_target_type and bot_dm_pubkey[4] appended to prefs with
backward-compat read guard (old firmware defaults to channel mode).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- BotScreen keyboard: add explicit null-terminator after strncpy when
trigger/reply text reaches max length (strncpy skips it in that case)
- BotScreen keyboard: clamp _kb_col to 3 when moving DOWN to special row,
so the cursor doesn't become invisible (col > 3 has no special-row item)
- MyMesh: initialise _bot_last_reply_ms = 0 in constructor (was relying on
BSS zero-init, which is technically UB for a non-trivial class member)
- RingtoneEditor: exit via CANCEL/Save/Discard goes to ToolsScreen instead
of HomeScreen — consistent with BotScreen and expected navigation flow
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New 'Tools' page on the home screen carousel with Ringtone Editor and Auto-Reply Bot items
- Bot settings: enable/disable toggle, channel picker, trigger phrase, reply text (keyboard with pre-fill)
- Bot logic in MyMesh: case-insensitive substring match, 10 s cooldown to prevent reply loops
- Settings: Home Pages visibility control (which carousel pages are shown; Settings and Messages always visible)
- DataStore: persist home_pages_mask and bot fields with backward-compat guards on read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The hardcoded offset numbers were inaccurate from the start (e.g.
autoadd_config listed as //87 but actually at //90) and drifted further
with each new field. The read/write is sequential with no seeks, so the
numbers add no value and only mislead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove mask==0 guard from isPageVisible/homePageVisible/toggle:
mask=0 now correctly means "all optional pages hidden" instead of
silently reverting to all-visible. Initialization always sets 0x01FF
before loadPrefs so 0 only occurs if user explicitly hides everything.
- Simplify toggle handler: direct XOR on home_pages_mask.
- HomeScreen: use navPage(+1) as fallback when current page becomes
hidden, instead of always jumping to i=0.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New "Home Pages" section in Settings lets the user toggle which pages
appear in the home screen carousel. Settings and Messages are always
shown; Clock, Recent, Radio, Bluetooth, Advert, GPS, Sensors, Tools
and Shutdown can each be hidden individually.
- NodePrefs: home_pages_mask uint16_t (bit per page, 0=all visible)
- HomeScreen: isPageVisible/navPage skip hidden pages; dots indicator
counts only visible pages; enforces visible page on re-entry
- SettingsScreen: SECTION_HOME_PAGES with per-page ON/OFF toggles
- DataStore: persisted at offset 1598
- Default: all pages visible (0x01FF)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When UP/DOWN changes pitch or ENTER cycles octave, a short 1/16-note
preview (BPM 240) is played immediately so the user hears the current
note while composing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- RingtoneEditorScreen: 32-note step sequencer accessible via new Tools page on home screen. U/D=pitch, ENTER=octave cycle, L/R=cursor, MENU=options (play, duration, BPM, insert/delete, save). Notes stored packed in NodePrefs and persisted via DataStore.
- ToolsScreen: new "Tools" home page entry launching the editor
- Buzzer volume: 0-4 bar control in Settings > Sound, persisted to prefs
- Buzzer notifications: fixed notify() firing inside wrong serial-guard branch and before addChannelMsg set the channel index
- Unread counter: fixed newest-first index direction; watermark formula now correct
- OLED brightness: wider range via pre-charge register 0xD9 combined with contrast
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- NodePrefs: add buzzer_volume field (0=min..4=max, default 4)
- DataStore: persist buzzer_volume at end of prefs file (backward-compat)
- buzzer: setVolume()/getVolume(); applyVolume() sets PWM duty cycle via
analogWrite() after each rtttl::play() call to control output amplitude
- Settings UI: new BzrVol bar item in Sound section (left/right to adjust)
- UITask: apply saved volume on startup alongside brightness
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- MyMesh: notify() now always fires for channel/contact messages regardless
of serial connection; called after addChannelMsg so channel index is set
- ChannelHist: fix unread watermark direction (histEntry is newest-first,
index 0=newest); counter now decrements correctly as user reads messages
- ChannelHist: reset unread to 0 after sending (user is active in channel)
- SH1106Display: add pre-charge register (0xD9) to setBrightness for wider
dimming range; re-apply contrast+precharge in turnOn(); tune curve
- UITask: remove MsgPreviewScreen dead code (~180 lines, never shown)
- UITask: fix strcpy→snprintf in showAlert()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
JakubandClaude Sonnet 4.6