Auto-detected at boot on Wire1/Grove (addr 0x5F) -- no setting to flip, and a
no-op on boards without that bus or with nothing attached. This UI's key
codes (KEY_LEFT/UP/DOWN/RIGHT/ENTER/CANCEL) already match CardKB's own byte
protocol, so most input needs zero translation and flows through the same
key queue as physical buttons.
Two bytes get remapped in UITask::pollCardKB():
- Enter, only when the on-screen keyboard's plain grid state is active (no
placeholder/accent popup, not in cursor-mode), becomes a new KEY_KB_ENTER
sentinel meaning "submit the field" -- reusing plain KEY_ENTER there would
insert a stray character, since a CardKB typist's row/col never reflect an
intentional grid selection. Everywhere else Enter is untouched, so
selecting a placeholder or committing an accent still works normally.
- Tab (otherwise unused) becomes KEY_CONTEXT_MENU, standing in for the
"Hold-Enter" long-press gesture CardKB has no way to produce -- without it,
~30 context menus across the UI (message reply/navigate, Bot/Admin/
Repeater, ...) would be unreachable from the keyboard alone.
KeyboardWidget gains a direct-typing path: printable ASCII inserts straight
at the cursor bypassing the grid, Backspace deletes, KEY_KB_ENTER submits.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean; also
smoke-tested Heltec_mesh_solar_companion_radio_ble (no ENV_PIN_SDA/SCL) to
confirm zero regression on boards without the feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The bot outgrew "auto-reply" once it gained Actions (!buzz/!gps/!advert/
!gpio1-4) that control device hardware remotely, not just answer messages.
Renames the Tools screen entry and all doc cross-references; already-shipped
release notes (v1.23) are left as-is to match what actually shipped under
that name.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
"+ Add channel" jumped straight into a generic Name+Secret form, so the
"hashtag channel" convention documented in docs/companion_protocol.md
(secret = first 16 bytes of sha256("#topic")) was only reachable by
already knowing to type a literal "#topic" into the passphrase field --
nothing in the UI surfaced it. The phone app instead shows an explicit
channel-type picker; this adds the same on-device.
"+ Add channel" now asks Public / Hashtag / Private first:
- Public commits immediately with the well-known default channel's name
and secret (8b3387e9c5cdea6ac9e5edbaa115cd72, confirmed to match
MyMesh.cpp's PUBLIC_GROUP_PSK and the docs' published key) -- useful
to restore it if deleted.
- Hashtag shows a single Topic field; Save synthesizes name="#topic" and
derives the secret via the existing SHA-256 passphrase path -- same
underlying mechanism Private already had, just discoverable without
knowing the "#" convention.
- Private is today's manual Name+Secret form, unchanged.
Editing an existing channel skips the picker (no ambiguity to resolve
there). Extracted hexToSecret() out of deriveSecret()'s hex-mode branch
so Public's fixed key parses through the same code instead of a second
hand-rolled loop. No other file needed changes -- openAdd()/openEdit()/
active()/render()/handleInput() keep their existing signatures.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
UITask::newMsg() (fired for every incoming DM/channel message) triggers a
3s "Msg: <sender>" overlay drawn on top of whatever screen is current --
including the shared KeyboardWidget when it's occupying the full screen
for text entry (message compose, room/repeater password, channel name,
device name, admin custom command, ...). A message arriving mid-typing
blanked out the letter grid for the full 3s with no way to see what was
being typed.
KeyboardWidget now tracks whether it was actually rendered this frame
(_visible, set at the top of render(), cleared by the new beginFrame()).
UITask's render loop calls _kb.beginFrame() before curr->render() and
skips the alert overlay when the keyboard turned out to be what got
drawn -- covers every screen that shares _kb, not just message compose.
The alert itself is unaffected (still fires, still expires after 3s) --
it just doesn't draw over the keyboard.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Renamed the vestigial Lemon/default font-switch naming (setLemonFont/
isLemonFont/drawLemonChar/lemonXAdvance/_use_lemon -> setSingleFont/
isSingleFont/drawGlyph/glyphXAdvance/_single_font) across DisplayDriver.h
and both concrete drivers -- both have been permanently single-font for
several commits, so the old names invited a future reader to think a
real switch still existed. Pure identifier rename, no logic changed.
Also extracted the byte-identical "SenderName: " prefix-splitting in
MyMeshBot.h's tryBotReplyChannel()/tryBotChannelCommand() into a shared
botChannelSenderSplit(), mirroring the existing botRoomSenderName().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
drawLemonChar()'s "y" is the top of the current text row on SH1106 (real
glyphs render at y + 7 + yo + row), unlike GxEPDDisplay's version, where
y IS the baseline. The undefined-glyph fallback box copied GxEPD's
y - 7*sz formula verbatim during the font-unification pass, sending it
7px above the row's top edge -- into the previous line's space. Drawing
it at plain y (already baseline minus the font's 7px ascent) lands it in
the same relative position GxEPD's version occupies, within its own row.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Page 0 was hardcoded to Latin -- Cyrillic/Greek could only ever be the
second, cycled-to page. Settings > Keyboard's Alphabet row splits into
Main (which script the keyboard opens on by default) and Additional
(the second one reached via #@/abc), so a Cyrillic/Greek typist can make
their own script the default instead of always landing on Latin first.
Setting Additional equal to Main collapses back to a 2-page cycle (that
script + Symbols), same rule the old Latin-hardcoded design already used
implicitly.
KeyboardWidget.h: cellStr()/t9GroupStr() now dispatch through
scriptCellStr()/scriptT9GroupStr(), treating Latin as an ordinary peer of
Cyrillic/Greek instead of a special case; scriptHint() replaces
altAlphabetHint() so the #@/abc key's "next page" hint is correct
regardless of which script that lands on; the accent popup's gating
checks the current page's actual script instead of assuming page 0 is
always Latin. Removed the now-dead pageIsAltAlphabet().
NodePrefs gains keyboard_main_alphabet (schema sentinel 0xC0DE001F ->
0xC0DE0020, same append-at-tail/clamp-on-load pattern as every prior
schema growth this file uses). Verified via a real build that the new
field lands in existing tail padding -- sizeof(NodePrefs) is unchanged
at 2712.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the 8 separate Latin-diacritic alt-alphabet pages (Polish, Czech,
Slovak, German, French, Spanish, Portuguese, Nordic) with one popup: Hold
Enter on a Latin letter that has accented variants (a c d e i l n o r s
t u y z) opens a floating horizontal strip of that letter's accents,
anchored over its own row so the grid stays visible underneath (LEFT/
RIGHT picks, Enter inserts via a new shared insertGlyph() helper, Cancel
dismisses). Holding a letter with no variants is a no-op. Cyrillic/Greek
remain full alt-alphabet pages; NodePrefs::keyboard_alt_alphabet shrinks
from 11 to 3 values accordingly -- an old saved Polish..Nordic value just
clamps to Latin via DataStore.cpp's existing range check, no migration
code needed.
Freeing Hold-Enter on letter cells required moving cursor-mode's own
trigger: UP from the top letter row now enters it instead of wrapping to
the special row. To keep that wrap reachable, cursor mode's UP/DOWN
(Home/End) continue the wrap once already at that boundary -- UP again
lands on the special row, DOWN again back on the letter grid -- reusing
the same proportional column mapping the old direct wrap used.
Diagnostics' font-coverage sample swaps its 8 per-language lines for one
line sampling the new accent table. Docs (message_screen, settings_screen,
solo_ui_framework) and release-notes updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Long field labels ("Flood advert interval (h)", "Frequency (MHz)") were
ellipsized to nearly the full row width with no reserve for the value
column, so a label could run under/through the value or digit editor on
the row currently being edited. Only rows showing an inline value now
reserve room before valCol(); other rows keep the full width as before.
Separately, the Frequency digit editor (4 int + 3 dec digits, needed for
Admin's wider 150-2500 MHz range vs Repeater's 3-digit range) drew all 8
digits flush to the screen edge, landing the thousandths digit exactly
under a visible scrollbar's reserve column. Shifted left by that reserve,
matching the plain-value branch's existing scrollbar-aware positioning.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- MessagesScreen: shrink message boxes to fit content and anchor them
right (outgoing) / left (incoming), like typical messengers; move
the [+ send] compose button to the right edge to match; fix its
frame margins (no descenders in the label made the symmetric padding
look uneven) and reclaim the freed 2px for the message list.
- KeyboardWidget: add Hold-Enter cursor-positioning mode (LEFT/RIGHT
move, UP/DOWN jump to start/end, Enter/Cancel exit) with a visual
"CURSOR MODE" indicator, so edits and inserts can target any point
in the typed text instead of always the end.
Message history (DM + channel) now stacks bubbles upward from the compose
row instead of the header, so the newest message sits at the bottom like
a typical messenger, with older messages progressively above. UP/DOWN and
the scrollbar direction are swapped to match; the newest bubble now keeps
the same breathing-room gap against the compose row as it does against
another bubble, instead of touching it.
Keyboard: Shift is one-shot by default (capitalises just the next
letter, then reverts), with Hold-Enter on Shift toggling a persistent
caps-lock for the old sticky behavior. Hold-Enter on Backspace clears
the whole field in one action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- GxEPDDisplay now uses the same single misc-fixed 6x9 font as the OLED
driver (Lemon retired there too), with baseline math updated for the
new ascent.
- Clock Tools' Alarm screen: Repeat and Armed now respond to LEFT/RIGHT
like every other multi-value/toggle field in Settings, not Enter-only;
Hour/Minute merged into one Time row edited with a hand-rolled HH:MM
digit cursor (like the Timer's), replacing the two-row DigitEditor
popups; Repeat's "Off" label now matches the codebase-wide ON/OFF
casing.
- Top status bar: battery icon now shares the same box height as the
other status icons (Bluetooth/mute/etc.) instead of standing 2px
taller, and its charge nub is properly vertically centred instead of
drifting off-centre at non-multiple-of-4 box heights.
- Small settings-gear icon glyph tweak; wio-tracker-l1 screenshot build
variant now enables DUAL_SERIAL.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replace the Lemon/default font-switch with a single misc-fixed 6x9 font
(full Latin/Greek/Cyrillic coverage), generated via a new tools/bdf2gfx.py
BDF-to-GFX converter. Removes the keyboard's per-render font-switch
workarounds now that one font fits its cell cleanly.
DiagnosticsScreen becomes a circular tab carousel (Live / System / Font),
adding a firmware+device+radio info tab and a per-alphabet rendering test
card covering every keyboard language.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reordered BotScreen's carousel to Channel / Room / Direct / Other and
made Channel the default opening tab, per feedback that the screen
should start from the first tab shown. Docs updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
- Context menus (PopupMenu, Nearby/QuickMsg call sites) go back to centring on
screen; the header's discoverable-menu glyph stays, but dropping the popup
out of its corner looked bad on some screens.
- Unread pill badge digit wasn't centred: Adafruit_GFX's classic built-in font
(SH1106/SSD1306) always pads a measured string by one trailing advance
column regardless of the glyph drawn, so centring on the raw width left 1px
more slack on the right than the left. New DisplayDriver::
textWidthTrailingGap() (0 by default) corrects for it on those two backends.
- On-device room Logout: mirrors the app's CMD_LOGOUT (drops keep-alive
tracking, forgets the saved password) so a room can be deliberately signed
out of from the Room options menu, not just re-logged-in.
Not build-verified — no PlatformIO toolchain available this session.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Hold-Enter context menus were invisible. Add a menu affordance to every screen
that has one:
- A small ≡ glyph in the header's top-right, via new DisplayDriver::
drawContextMenuHint() and an optional menu_hint arg on drawCenteredHeader() /
drawInvertedHeader() (reserves the corner so the title never runs under it).
- The glyph highlights (corner cell filled, bars knocked out) while the menu is
open, tying the hint to the popup it spawned — driven by a menu_open flag the
screens pass from their live popup state.
- The context menu now drops out of that corner: PopupMenu gains an opt-in
top-right anchor (begin(..., anchor_top_right)); it right-aligns under the
header instead of centring, so the menu reads as emerging from the ≡. Default
stays centred, so non-context popups (Tools/Settings/etc.) are untouched.
Enabled on Nodes (list/scan/detail) and Messages (mode select, contact/room and
channel pickers, DM and channel history).
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
renderBatteryIndicator() drew the secondary icons in a fixed sequence, so a busy
bar (many background modes on) shrank the node-name area to a couple of ellipsised
characters. Rework it into a priority-ordered list laid out right->left with a
reserved minimum name width: once an icon won't fit above the reserve, every
lower-priority icon after it is dropped too.
Priority: BT > GPS fix > alarm > mute > auto-advert > trail > live-share > repeater
(battery stays rightmost). Blinking icons still reserve their slot while off, so
the name width doesn't flicker with the blink. Also -39 lines (eight if-blocks
collapse to one table + loop).
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Recent adverts carousel page was a read-only name+age list of recently-heard
nodes — now covered by the Nodes screen (which folds getRecentlyHeard() non-contacts
into its list). Remove it from the UX:
- isPageVisible() hard-hides HomePage::RECENT, so it drops out of the carousel for
everyone (default and custom page orders, existing users included).
- Delete the dead RECENT render block, the nav "Recent adverts" alert and the unused
AdvertPath recent[] member.
- Drop HOME_RECENT from Settings > Home Pages so there's no dead toggle.
HPB_RECENT bit index is left intact, so persisted page_order / home_pages_mask stay
valid (a stored RECENT entry is simply skipped) — no migration, no schema bump.
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Turn Nearby Nodes into the single node hub and make its navigation legible.
Node management (no phone app needed):
- MyMesh gains addDiscoveredContact() and deleteContactByKey(); CMD_REMOVE_CONTACT
now reuses deleteContactByKey() (one delete path: contact + blob + room password
+ UI cleanup + lazy write).
- Action menu (Hold Enter) gains Add contact (a new scanned node), Favourite /
Unfavourite (pin to the first free dial slot), and Delete contact (confirm first,
defaults to Cancel). Actions are offered contextually per row.
- A pinned contact shows a star in the list row, next to any live-share diamond.
Absorb passively-heard adverts: refreshStored() folds getRecentlyHeard() nodes that
aren't already listed as name+age rows (All filter only — AdvertPath has no type),
so "recently heard" no longer needs its own page.
Legible filter navigation: the filter (LEFT/RIGHT) is now a visible tab strip — the
active filter is a centred inverted pill, neighbours fan out and wrap around
(circular, first<->last). Only whole tabs are drawn so labels never wrap a line.
Rename Tools > "Nearby Nodes" to "Nodes".
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
UI-polish trio from CODE_REVIEW (biggest "feels finished" gain per line):
- Pill unread badges: new DisplayDriver::drawUnreadBadge()/unreadBadgeWidth()
draw a filled capsule with the count knocked out (corners knocked back for a
rounded look; inverts on a selected row). Replaces the bare right-aligned
digits in MODE_SELECT, the contact/channel pickers and favourites tiles.
No <stdio.h> in the header — fmtBadgeCount formats manually, clamps to 99+.
- Unified DM/CH history headers: DM_HIST and CHANNEL_HIST drew their titles by
hand (drawTextCentered + fillRect at lh+1), a different height/separator than
every other screen. Both now route through drawCenteredHeader().
- Trimmed default home carousel: new NodePrefs::HP_DEFAULT (Clock, Tools,
Shutdown, Favourites, Map; Messages + Settings always visible = 7 pages).
applyDefaults() seeds it instead of HP_ALL. Recent/Radio/BT/Advert/GPS/Sensors
are opt-in via Settings > Home Pages. Existing users keep their saved mask —
factory default only; no migration, no schema bump.
Both solo envs build green (OLED RAM 69.9%/Flash 62.8%; e-ink SUCCESS).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A full (non-partial) refresh on every screen change (638eea7b) turned out to be
far too aggressive on real e-ink hardware: every navigation black-flashes,
which is worse than the ghosting it was clearing. Remove the whole mechanism —
DisplayDriver::forceFullRefresh() virtual, GxEPDDisplay's _force_full flag and
override, the endFrame() branch, and the setCurrScreen() call. E-ink is back to
interval-only full refreshes (Settings > Full refresh interval).
The favourites "(gone)"-tile prune that shipped in the same commit is kept.
Builds green: WioTrackerL1Eink_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Logging in to a room server (first-time prompt or a remembered password) used
to leave the user on the room list, needing a second Enter to open the chat.
onRoomLoginResult() now opens the room history on success via a shared
openDmHistory() helper (extracted from the Enter-on-contact path).
The login result is async, so the auto-enter is gated on the user still being
on that room in the picker: phase CONTACT_PICK, room mode, no context menu /
share / pick-target sub-flow active, and the result pubkey matching the
selected contact. Otherwise it stays put (no yanking the user into a screen
they navigated away from).
Resolves the "auto-enter after login" code-review item. Builds green:
WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The shared keyboard seeds {loc}/{time} on begin() for message composition, but
a room/repeater login password is not a message — a placeholder token there is
nonsensical and a footgun (picking one inserts literal "{time}" into the
password). Clear them right after opening the keyboard in both room-login paths
(context-menu Login… and the Enter-on-room prompt), matching the same fix
already applied to preset names and waypoint labels.
Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two duplications surfaced by a framework-consistency pass:
- KeyboardWidget applied the a-z shift-uppercase at five draw/commit sites
with an inline `if (caps && ch >= 'a' && ch <= 'z')`. Fold them into one
`kbApplyCaps(ch, caps)` helper.
- The favourites grid drew the empty "+" tile from two branches (the gone-slot
prune and the always-empty slot). Route both through a single `has_contact`
flag so the "+" and the trailing selection-colour reset each live at one site.
No behaviour change. Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
T9 keys now read like a phone keypad — each cell is labelled <digit><group>
(e.g. 2abc), with the digit matching what the multi-tap cycle lands on after
the letters. No separator space: the widest group (".,!?'-") plus the digit
already fills a narrow 128px OLED cell at 3 columns.
Also fills in the v1.22 release notes (T9 keyboard, trail auto-save, Clock
Tools in Tools, Map/Shutdown reorderable, battery-read fix, the UI-audit fix
batch, discover-dedup, favourites self-heal, preset-name placeholder, OLED
frame-skip, e-ink full-refresh) and syncs the solo-feature docs: new Keyboard
settings section, Trail Auto-save row, and Clock Tools reachable from Tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The favourites render already continues on !found (gone-slot prune), so the
badge block only runs when found is true. The if(found) guard around the
unread-badge lookup was always true — remove it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UI quick wins from the 2026-07-05 review:
- E-ink: force a full (non-partial) refresh on the first frame of a new
screen. Inter-screen ghosting was the most visible cheap win — the
N-partials interval alone doesn't catch navigation. New
DisplayDriver::forceFullRefresh() (no-op on OLED), set in setCurrScreen()
and consumed by GxEPDDisplay::endFrame().
- Favourites: clear a stale "(gone)" tile at render time so it reverts to an
empty "+" slot. Happens when prefs outlive the contact list (e.g. a wiped
/contacts3); onContactRemoved only catches a live delete. Pruned slots are
persisted once per pass (self-healing — an emptied slot can't re-fire).
Builds green: WioTrackerL1_companion_solo_dual (OLED),
WioTrackerL1Eink_companion_solo_dual (e-ink).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The SH1106 path always pushed the full 1 KB buffer over I2C every endFrame,
even on static screens (clock, home) that don't change between updates. Hash
the GFX buffer (FNV-1a, no external dep — the CRC32 lib is only wired into
e-ink builds) and skip display.display() when it matches the last frame
pushed. _force_redraw forces a flush on the first frame and after
turnOn()/clear() so a post-wake or post-clear frame can't be wrongly skipped.
Mirrors the existing e-ink CRC-skip. Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Losing the whole route on a low-battery auto-shutdown was the worst solo-mode
failure. New NodePrefs::trail_autosave_lowbatt toggle (Tools > Trail >
Settings > Auto-save, default OFF): UITask::shutdown() writes the live trail
to /trail when the toggle is on and _trail.count() > 0. The count guard stops
an empty trail from wiping a previously saved one; it overwrites the same
/trail file the manual Trail > Save uses.
Schema bumped 0xC0DE001A -> 0xC0DE001B: append-only tail field with a load
clamp, so pre-0x1B saves default to off. sizeof(NodePrefs) is unchanged (the
byte fits existing padding after keyboard_type), so the tripwire assert stays
2496.
Builds green: WioTrackerL1_companion_solo_dual (RAM 69.9%, Flash 62.8%).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "(N)" origin readout printed the raw wire path_len. That byte packs the
path hash-size mode in its top 2 bits and the hop count in the low 6, so with
path_hash_mode >= 1 (2-byte hashes) it over-reported — e.g. "(66)" for a
2-hop message. Mask & 63 (getPathHashCount) so it shows the real hop count.
Affects the ui-orig variants only (ui-new/ui-tiny ignore the arg).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A discover response often arrives twice — the zero-hop direct copy and a
re-flooded copy relayed by another repeater carry different packet hashes,
so the mesh duplicate filter passes both. The standalone scan appended the
same node twice and app-driven discover forwarded both copies, so one
repeater showed up as two.
Track (tag, responder pubkey) for a short window in isDupDiscoverResp() and
drop the second copy in both the standalone and app-forward paths.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- locked device: a ringing alarm/timer was invisible — wakeForAlarm() now
holds the lock wake window for the whole ring, the lock screen draws the
alert overlay, and a key-dismissed ring falls back to a 5 s glance
- status bar: A / live-share / trail / repeater icons no longer vanish when
Bluetooth is off (moved outside the isSerialEnabled() gate)
- alert overlay: long text wraps to up to 3 lines inside the box instead of
overflowing the border (new UITask::renderAlertOverlay, shared with lock)
- MyMesh: force NUL on contact.name copied from an app frame (unterminated
name could overrun the AdvertPath strcpy)
- clock tools: ring/timer deadline compares now wrap-safe (signed diff),
matching the trail/loc-share timers
- messages: channel context menu freezes its target channel at open; fav
toggle no longer retargets the menu when the fav-only filter drops the row
All three solo envs build green (WioTrackerL1 OLED/Eink, GAT562-30S).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Surfaces the Alarm/Timer/Stopwatch screen (previously reachable only
from the home Clock page) as a System tool, via the existing
UITask::gotoClockTools() and ICON_ALARM.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The shared on-screen keyboard seeds {loc}/{time} placeholders on begin()
for message composition, but they make no sense in a radio-preset name.
Clear them right after opening the keyboard from the "+ Save current..."
flow in both Settings > Radio and Tools > Repeater; the message-slot
editor still keeps them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
