handleScreenshotRequest() reinterpret-cast every DisplayDriver* first to
SH1106Display* then to SSD1306Display*; both casts always produce a
non-null pointer, so the SSD1306 fallback was unreachable and on any
SSD1306 build we called SH1106::getBuffer() on a SSD1306 object — UB
that only happened to work because both backing classes share an
Adafruit_GFX layout at offset zero.
Replace the cast hack with virtual getBuffer()/getBufferSize() on
DisplayDriver, overridden in SH1106Display and SSD1306Display. MyMesh
no longer needs to know about either concrete type. const-correct the
buffer pointer and widen bufferSize to uint16_t while passing through.
Also fix the matching Python decoder: it sanity-checked length before
dispatching on resp_code, so a 2-byte RESP_CODE_ERR frame was reported
as "Frame too short" instead of the actual device error. Move the
length check after the resp_code dispatch and log the error code byte.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Adds the possibility to capture the device screen and save it as a PNG
image
- Wrap the code behind ENABLE_SCREENSHOT build flag, as per instructions
in README
Single-slot persistence as agreed. Action popup grows three entries
(conditional on what makes sense for the current state):
- "Save trail" — writes the current RAM ring to /trail in LittleFS.
- "Load trail" — only shown when /trail exists; replaces the live ring
with the snapshot (any active session ends first).
- "Export GPX" — dumps the trail as a minimal GPX 1.1 document over
Serial so the user can capture it from a USB host.
Plumbing:
- TrailStore gains writeTo / readFrom (template on the file handle, so
the platform-specific File flavour stays out of Trail.h) plus
exportGpx(Stream&) for the GPX serializer. Header carries magic
"TRAL", a version byte, point count, and the accumulated active time
so elapsed survives the round trip.
- DataStore::openWrite is exposed publicly so callers outside DataStore
don't have to duplicate the platform open-mode dance.
- MyMesh gains a public getDataStore() accessor.
After Load, _pending_seg_break is set so any subsequent Start opens a
new segment instead of joining the loaded last point.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces "Type: Repeater" line with the node's full public key encoded
as base64 (44 chars). drawTextEllipsized clips it with ... to fit the
128px wide display. Type is already visible in the inverted header.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each discovered node now renders as a boxed 2-line card (same style as
message history):
┌──────────────────────────────┐
│ NodeName (or [Sensor]) Type │ ← inverted header
│ RSSI:-87 SNR:7 Rem:5 │ ← signal stats
└──────────────────────────────┘
Add snr_x4 and remote_snr_x4 to DiscoverResult:
snr_x4 = _radio->getLastSNR()*4 (how well we heard the response)
remote_snr_x4 = payload[1] (how well responder heard our request)
2 items visible at a time; UP/DOWN scroll through results.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add rssi field to DiscoverResult, captured from _radio->getLastRSSI()
when the discover response is received.
Display format in the right column:
known node → "Rpt-87" / "Snsr-92" (type + dBm)
new node → "*-87" (asterisk + dBm; type already visible in "[Rpt]" label)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the inline advert scan in the nearby list with a proper
CTL_TYPE_NODE_DISCOVER_RESP-based sub-screen accessible via the context menu.
- DiscoveredEntry → DiscoverResult: adds name[32] and is_known flag so
both known contacts and unknown nodes are shown with useful labels
- getDiscoveredNodes → getDiscoverResults, capacity 8 → 16
- onControlDataRecv populates name from contacts for known nodes and
records all respondents (not just unknowns)
- NearbyScreen gains _discover_mode sub-screen: 8-second scan window,
live result polling each render cycle, UP/DOWN scroll, CANCEL to
return, ENTER/M to re-scan; known nodes show actual name + "known",
unknown nodes show "[Type]" + "NEW"
- List view is clean: no discovered nodes mixed in, no scanning banner
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NearbyScreen now sends CTL_TYPE_NODE_DISCOVER_REQ (same protocol as the
companion app) instead of a plain self-advert. Nearby repeaters, sensors
and room servers respond with their pub_key and type. Known contacts get
their lastmod refreshed; unknown nodes appear as temporary entries (e.g.
"Repeater") in the list until their advert is received.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Single shared _bot_last_reply_ms caused a DM reply to block the
channel bot for 10s and vice versa. Split into _bot_last_dm_reply_ms
and _bot_last_ch_reply_ms so each cooldown is independent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ping sent empty messages appearing in target's chat history, and RTT
measurement never worked for direct sendMessage() calls. Removed all
ping state machinery and registerExpectedAck(); detail view now shows
node info only (lat/lon/dist/bearing/type).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Direct sendMessage() calls bypass the BT serial handler that populates
expected_ack_table; add registerExpectedAck() to MyMesh and call it from
NearbyScreen so isAckPending() can actually track the outstanding ping.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The #define was inside the private section, after isAckPending() which
references it — preprocessor hadn't seen the symbol yet at that point.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add NearbyScreen: GPS contact list with haversine distance sort,
type filter (ALL/Chat/Rpt/Room/Snsr), detail view with ping (RTT via
ACK poll), node scan via advert(), context menu
- Add DashboardConfigScreen: configure up to 3 data fields on the clock
page (Battery, Temp, Humidity, Pressure, GPS, Altitude, Lux, CO2,
Contacts); entered via long-press ENTER on clock page
- Rework HP_CLOCK layout: full-screen clock (size 2 at y=0), date at
y=19, separator at y=28, three data field rows at y=31/41/51;
hide node name/battery indicator on clock page
- Persist dashboard_fields[3] in NodePrefs and DataStore
- Add isAckPending() to MyMesh for NearbyScreen ping detection
- Wire NearbyScreen into ToolsScreen and UITask
- Reduce NearbyScreen entry buffer from MAX_CONTACTS(100) to 32,
saving ~3.3 KB RAM
- Switch haversine/bearing math from double to float (sinf/cosf/atan2f),
eliminating double libm and saving ~5-10 KB flash
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move tryBotReplyDM() and tryBotReplyChannel() implementations to
MyMeshBot.h (included at end of MyMesh.cpp). onMessageRecv and
onChannelMessageRecv now contain only a single-line call each,
minimising the diff against upstream in those methods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace BotScreen's custom embedded keyboard with the shared global
keyboard layout (KB_* constants): char rows at KB_CHARS_Y, special row
at KB_SPECIAL_Y=48 with 5 buttons ([^][Sp][Del][{}][OK]), fixing the
previous layout that rendered below the 64 px display boundary.
Proportional column scaling between char rows (10 cols) and special row
(5 cols). [{}] opens the placeholder picker overlay.
- Add MsgExpand.h: standalone inline expandMsg() with no framework
dependencies, expanding {loc} and {time} placeholders. Used by both
MyMesh (bot channel/DM replies) and QuickMsgScreen, replacing the
duplicate expandBotMsg() static and the inline expandMsg() method.
- Bump FIRMWARE_VERSION to v1.15.3.
- ToolsScreen: remove key-hint footer line.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New 'Tools' page on the home screen carousel with Ringtone Editor and Auto-Reply Bot items
- Bot settings: enable/disable toggle, channel picker, trigger phrase, reply text (keyboard with pre-fill)
- Bot logic in MyMesh: case-insensitive substring match, 10 s cooldown to prevent reply loops
- Settings: Home Pages visibility control (which carousel pages are shown; Settings and Messages always visible)
- DataStore: persist home_pages_mask and bot fields with backward-compat guards on read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix placeholder picker colors: dark box + white border, light fill
for selected item (consistent with rest of UI)
- Fix placeholders not expanded when sending from keyboard (expandMsg
was only called in MSG_PICK path, not KEYBOARD path)
- Fix sent messages incrementing unread counter: set _phase=CHANNEL_HIST
before addChannelMsg so viewing=true
- Fix keyboard column inverse mapping on UP from special row
- Remove old_row dead code from QuickMsgScreen keyboard handler
- Alert banner shown only on home screen, suppressed in settings/messages
- Bump FIRMWARE_VERSION to v1.15.1
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.
Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
