- DisplayDriver takes ColorVal; each driver's .cpp defines the UIColor roles
(window_bkg, primary_txt, ...) in its own values. ui-new draws in two:
window_bkg and primary_txt. OLED and e-ink look as before (sim screens
pixel-identical).
- E213, E290, LGFX, Null, ST7735, ST7789LCD, U8g2 taken whole from upstream
(with them the rewritten ST7735 driver and the Heltec V4 R8 TFT display).
- SH1106, SSD1306, ST7789, EinkGfxDisplay and the sim drivers converted.
- ui-orig, ui-tiny, simple_* get upstream's colour roles; the repeater's UI
taken from upstream (its power-off screen).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Bluetooth + USB (+ WiFi/Ethernet/UART per build) in one interface_manager,
as upstream; frames go to every enabled link, USB is read while BT is
connected. DUAL_SERIAL now means ENABLE_USB_INTERFACE.
- WiFi interface with upstream's wifi_* prefs and set/get wifi.* CLI.
- isClientConnected moved into ArduinoSerialInterface (DTR on nRF52 and
ESP32 native CDC).
- UI uses isBluetoothEnabled/enableBluetooth/disableBluetooth; turning BT
off leaves USB and the other links on.
- DualSerialInterface removed.
- Sim build gains DynamicConfigSerializer.cpp (broken since bd64c203).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes and features from upstream: MACThenDecrypt / command buffer
overflow fixes, ACK forwarding delay, transport code 0 as unscoped,
hidden nodes don't answer DISCOVER, LR2021/LR1121 fixes, GPS cold-start
detection and waitFor()/drain(), NMEA fix-age counters, ESP32 RTC after a
crash, remote CLI by text message (TXT_TYPE_CLI_COMMAND),
PUSH_CODE_BINARY_RESPONSE, board.loop(), new boards (Wio Tracker L1 1W,
ThinkNode M4/M8, Muzi Base, Waveshare LR1121, Pico W).
Kept ours: NodePrefs, main.cpp, every UI, GxEPDDisplay. The companion CLI
stays MyMeshCli.h's handleCliCommand(); upstream's handleCommand() calls
it. The board's FEM gains go through attachDynamicPrefs() with an adapter
over our NodePrefs fields. Upstream's JSON prefs and MultiSerialInterface
come as their own stages.
Also: the display defaults were inside RADIO_FEM_TXGAIN's #else (a
missing #endif).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every packet heard runs from its origin through the repeaters with a
position to this device; a packet sent is a ring. ui-core/PacketFlow.h
resolves them (UiCore::flow, MyMesh logRx/logTx -> Listener). ui-lvgl
draws them on the map's marker layer and repaints only their area while
they move; ui-new draws the last minute on the Nodes map ("Flow" in its
options). Setting: Map options > On the map > Packet flow, CLI map.flow.
Off by default. Sim-checked only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor results are links (node k hearing k-1 and back); toNode()
off traces only the repeaters (a companion answers only with repeat on);
probe() traces to each repeater in turn after no reply; failures carry a
reason; an empty list saves "direct". PingEngine takes over a slot left past
its timeout. A kept route: the dropped heard path isn't announced to the app
nor bumps lastmod; an app update keeps the flag only if it leaves the route.
Marker boxes sized for every dot and name (overflow).
ui-lvgl Route: one line per node with out / back dB coloured by quality, tap
a hop to move / remove, tap the node to include it, Keep in the header, Find
where beside a no-reply status. ui-new Path: To node / Find break rows,
result alerts, cursor kept on its action.
Channels: ui-new re-sorts the list on entering it, cursor on the same channel.
Docs: Path and trace, Channel order. Sim hooks: open route, add channel,
open messages.
Checked in the browser sim (L2 + ui-new peer + repeater); not on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/prefs holds a header (magic, format version, size, CRC-32), the node's
position and NodePrefs as it is in memory, in place of /new_prefs' two
hand-kept field lists and 0xC0DE00xx schema bumps. A new field goes at the
end of the struct; moving one bumps PREFS_VERSION. sanitize() keeps every
value in range.
The first boot after an update from before 2.0 imports only the first
block of the old file, laid out the same in upstream MeshCore and Solo
(name, position, radio, BLE PIN, scope), then deletes it; everything else
starts from the defaults. Contacts, channels, scopes, waypoints and trails
are untouched.
Gone: the page-order and GPS-interval migrations, the unused
trail_interval_idx / trail_units_idx / repeat_extra_scopes; fav_sort_off
and msg_wake_screen_off become fav_sort and msg_wake (on by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The OLED gets the arrows towards nodes in Nodes and the Path row with its
hop rings in a stored node's detail (its position on one line to make the
room); no compass rose. Trail gets a height-profile view on both. The
Status history, trail profile and calendar come from ui-core. A sim hook
turns on the advert's position for tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-core: Diagnostics::systemLines, NearbyModel::typeShort,
rptctl::currentPresetName, RoomSessions::pendingKey, settings::isSwitch,
UiCore::reconcileDMUnread.
- ui-new: the retired Recent page, fmtAlt, the battMvToPercent wrapper,
setFavouriteChannelSlot, AccordionList onHeader/visibleCount, drawBoxedIcon
and seven unused icons; info::row folded into info::valueRow.
- ui-lvgl: onOpenNav, TileDownloader::withTrails; the trail header size is
one constant (TRAIL_HDR) for live and saved trails.
- Home quick panels save prefs only when a value changed.
- Comments brought in line with the code (status bar reserve, settings rows,
page order, SH1106 frame skip, UiCore header).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- build-solo-sim.yml clones LVGL at the version pinned in
solo/wio-tracker-l2/platformio.ini and builds the SIM_UI=lvgl sim into
wasm/lvgl/ of solo-sim-wasm.zip, for the site's device switch.
- build_wasm.sh: LVGL_DIR can be overridden (CI has no .pio libdeps).
- sim_test_set_node_name(): names a sim node, for site screenshots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
helpers/esp32/InternalFS.h picks the filesystem: -D ESP32_LITTLEFS mounts
LittleFS on the same "spiffs" partition, otherwise SPIFFS as before. Only the
L2 LVGL envs set it; every other ESP32 board is unchanged. A settings save
drops from ~0.5 s to ~80 ms and the files survive power loss mid-write.
No migration: the first boot formats the partition (fresh identity).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The map's download button fetches the visible area (overview levels up to
a chosen zoom) into /sdcard/maps from OpenTopoMap or maps/source.txt,
skipping tiles already on the card and rejecting placeholder answers.
Settings > WiFi stores the network in NVS (with scan); WiFi is on only
while a download runs. HTTP runs on a worker task on core 0; the popup
shows link, internal heap and the last TLS/HTTP error.
Internal RAM was the blocker (~13 KB free with WiFi + Bluedroid): the L2
LVGL env now allocates the_mesh in PSRAM (MESH_IN_PSRAM, static RAM
210 -> 87 KB) and mbedTLS allocates from PSRAM. Confirmed on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Simulator: SIM_UI=lvgl variants/sim/build_wasm.sh builds ui-lvgl for the
browser. SimLcdDisplay blits LVGL's RGB565 flush to a 320x240 canvas and
LvglPort.h's sim branch feeds the mouse in as touch; LVGL comes from the
L2 env's libdeps, its objects cached in web/build/obj_lvgl/. web/lvgl.html
runs it beside a ui-new peer on a direct link, with a window.sim API for
headless checks. New hooks: sim_lcd_touch, sim_lcd_button,
sim_test_send_channel_msg.
Compose: the theme's padding left less than one line in the field, so it
scrolled vertically and text jumped; pad it to fit exactly one line. The
cursor is drawn only while FOCUSED, now set while the keyboard is up.
With the keyboard up the screen header hides so the conversation keeps a
message in view; the accent popup stays inside the keyboard, clear of the
field; channel bubbles put the age next to the sender (one line shorter);
the thread scrollbar shows only while scrolling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new hands MyMesh the UI Core (UITaskBase::meshListener()). The Core
applies the display filter, labels room posts, files history, keeps DM /
channel / room unread and the queue count, and reports incoming messages
and adverts as MessageArrived / AdvertHeard events. UITask now derives
UITaskBase + UiCoreHost: it answers "is this conversation on screen" and
keeps the selection after an insert, forwards not-yet-extracted parts
(room login / admin, bot device actions, removal cleanup, shutdown), and
turns events into alert / wake / sound, drained at the start and end of
its loop(). Mesh callbacks no longer touch the display or buzzer.
AbstractUITask is split into UITaskBase (lifecycle, link state, helpers)
and the Listener glue ui-orig / ui-tiny keep using unchanged. Screenshot
handler reaches ui_task directly instead of casting the Listener.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ports upstream's "Abstract UI overhaul" (PR #3431 + follow-ups) with
identical names/signatures. MyMesh talks to the UI only through
MyMesh::Listener (setListener()); a second block holds Solo extensions
(own-send mirroring, relay echoes, room login/admin replies, [LOC] shares,
contact/channel removal, bot device actions, requestShutdown), all no-op
by default.
AbstractUITask becomes the Listener and carries the glue MyMesh used to
run for the UI (display filter, room-post labels, notifications,
connection polling). BLE PIN randomisation moves to main.cpp as upstream.
Also fixes ui-orig's stale advertReceived event on buzzer boards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GxEPD2 polls the panel's BUSY pin for the whole refresh (up to ~1-2s),
stalling the main loop. A TX finishing in that window left the SX126x in
standby -- deaf -- until the refresh ended; packets received meanwhile could
be lost (only the latest is readable, and a later CRC failure rejects a good
one still pending). Hook GxEPD2's busy callback to finish TX / drain RX into
a small staging queue and re-arm right away, without touching dispatch/UI.
Wired only where the display driver supports it (GxEPD2: the two e-ink Solo
boards); OLED and sim builds are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Today if a user builds firmware with an incorrect WiFi SSID or password,
they get a generic `WiFi disconnected.` error message.
Extend logging to descirbe the reason that WiFi was disconnected.
I gathered the updated logs for the 3 scenarios below.
```
WiFi: Attempting manual WiFi reconnect...
WiFi: WiFi disconnected (reason=ASSOC_LEAVE). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
```
```
WiFi: WiFi disconnected (reason=NO_AP_FOUND). Flagging for reconnect...
```
```
WiFi: WiFi connected successfully!
WiFi: Got connection
```
loadPrefsInt()'s "sentinel mismatch" block had accumulated ~62 lines of
one-shot backfills tied to specific old NodePrefs::SCHEMA_SENTINEL values
(favourites/map home-page bits, split bot-command toggles, trail_units_idx,
bot_trigger_ch seed, scope mask/index zeroing). Reduce it to just the
sentinel read + mismatch log line -- an upgrade from a version old enough
to hit any of these now lands on today's plain defaults for that field
instead of a silently-seeded value, same outcome a fresh device already
gets. The ongoing per-field range clamps (defensive against any corrupt or
out-of-range byte, not version-specific) are untouched.
Same treatment for DataStore::loadScopeList()'s one-time synthesis of a
scope-list entry from the old single default_scope_name/key field: removed,
along with the scope_migrated_legacy plumbing in MyMesh::begin() that only
ran once that migration had just fired. loadScopeList() drops its now-
unused NodePrefs parameter and bool return.
Also trimmed ~25 per-field comments that over-specified which exact old
sentinel produced which stray byte, down to what the clamp actually
defends against -- except where the hex value explained a genuinely
non-obvious byte-aliasing interaction, which stays. One comment (scope
mask/index) was flagged and rewritten because it described the very
zeroing logic this change removes.
Drive-by: two comments still said Settings > Sound > "Msg wake" -- it's
been under Settings > Display for a while, per the enum's section grouping
in SettingsScreen.h.
Verified: sim_companion_radio and WioTrackerL1_companion_solo_dual build
clean, RAM/Flash usage unchanged (pure logic removal, no schema/layout
change).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two independent changes, requested together:
1. Settings > Sound > "Msg wake" (NodePrefs::msg_wake_screen_off,
0xC0DE002A) lets a user disable UITask::newMsg()'s existing behaviour
of turning the display on for an incoming message when it was off and
no companion app is connected. Stored inverted so both a fresh device
and an existing saved-prefs file default to "on" (today's behaviour).
New sim_test_set_msg_wake_disabled() hook verifies it without scripting
Settings navigation -- confirmed end to end via a real A<->R<->B mesh
in Playwright: message delivered while B's screen is off either wakes
it (enabled) or doesn't (disabled), checked via real canvas pixels.
2. A brand-new or factory-reset device now shows ALL home pages by
default instead of a curated 5-page carousel (MyMesh.cpp used to seed
home_pages_mask = HP_DEFAULT; now seeds 0, which every other read site
already treated as "all visible" -- HP_DEFAULT is now unused, removed).
Existing users' saved masks are untouched. New sim_test_get_home_pages_mask()
getter confirms a fresh instance reads back 0.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
(cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
network
- teach build_as_lib.py where SerialWifiInterface moved
arduino-pico's WiFi.begin() blocks for up to 2x its 15s timeout, which
stalled the mesh loop on every reconnect attempt; use beginNoBlock().
Log the IP when the link comes up, and the status code when retrying.
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
BaseChatMesh::bootstrapRTCfromContacts() called setCurrentTime(latest+1)
unconditionally. The newest contact's lastmod proves the clock must be at
*least* that late -- it says nothing about it being any earlier -- so on
any node that already has a better time source (a board with a real RTC,
or the Emscripten sim whose SimRTCClock is backed by the host's wall
clock) this dragged a correct clock backwards to whatever timestamp
happened to be persisted alongside the contact list. Measured in the
sim: ~9s behind real time after every reboot, growing with how long the
previous session ran.
Also adds sim_test_sync_time(epoch_secs) next to the other
SIM_PLATFORM/__EMSCRIPTEN__ test hooks, so a host page can re-anchor the
RTC on every (re)boot. The clock is live state the real mesh writes to at
runtime -- a peer whose own clock runs ahead pushes ours forward, which
is right on a node with no better source and, with meshcore-solo-site's
cross-visitor relay, means one skewed visitor can drag everyone. On a
demo running on someone's computer, "reset the device" should also mean
"the clock is correct again".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
meshcore-solo-site's new cross-visitor relay bridge (Phase 3) needs a way
to read a sim instance's live freq/bw/sf/cr so a WebSocket relay server
can fan traffic out only to other visitors tuned to the same params,
mirroring real LoRa channel isolation. Added sim_radio_get_params()
(examples/companion_radio/main.cpp), reading NodePrefs directly -- the
real live source of truth, since SimRadio::setParams() has always been a
complete no-op (accepts and discards its arguments). Out-params via
pointer, same buffer-pointer idiom sim_radio_poll_tx() already uses;
build_wasm.sh needed HEAPF32/HEAP32 added to EXPORTED_RUNTIME_METHODS so
JS can read them back.
While testing the relay bridge with two independent browser contexts, hit
a real bug: sim_instance_salt() (SimInstance.h) is a pure function of the
simInstanceTag STRING ('hero'/'B'/'R'), so it's only useful for telling
apart same-tab instances -- it's identical for two genuinely different
visitors who both boot a 'hero' instance. Combined with SimRNG::begin()'s
other seed ingredients -- time(NULL) (1-second resolution) and a WASM
heap pointer (no ASLR inside the sandbox, so it's fully deterministic
across independent boots of the same binary) -- two different visitors
landing on the same wall-clock second reliably generated byte-identical
Ed25519 identities (confirmed: two fresh browser contexts launched
together produced provably identical advert packets end to end).
Fixed by mixing in real crypto.getRandomValues()-sourced entropy from the
host page (new sim_instance_entropy(), read the same way simInstanceTag
already is) into both SimRNG::begin() and the twin seeding pattern in
SimRadio::getRngSeed(). Applies to every sim instance uniformly (hero/B/R
all get proper per-session entropy now), not just the new relay path --
strictly an improvement with no compatibility concern, since identity
generation only ever runs once per fresh/empty IDBFS.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
NodePrefs::auto_off_secs defaults to 15 -- real power-saving behaviour a
battery-powered board needs (screen off, optionally locked, 15s after
the last input). UITask::autoOffMillis() treats 0 as "never" and skips
that whole branch in UITask::loop() entirely, so there's no separate
flag to touch. A demo running on a visitor's screen has no battery to
save and no reason to go dark while they're reading it.
sim_test_disable_screen_timeout() is a new sim-only hook, same shape as
the other sim_test_* boot-time hooks: meshcore-solo-site calls it once
after boot.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
NodePrefs::tz_offset_hours defaults to 0 (UTC) -- correct for real
hardware, which has no other way to know the visitor's timezone besides
Settings > System > Timezone. SimRTCClock (see 718dbdbe) is already
correct live UTC (time(NULL)), but without a timezone applied, a demo
instance's Clock screen displayed correct-but-UTC time, which just reads
as "wrong" to a visitor who never opened Settings -- e.g. 20:40 shown
while it was really 22:40 CEST. This is the other half of the site's
"would be nice if the time was synced with the computer" ask; 718dbdbe
only fixed the stale-IDBFS-restore half.
sim_test_set_timezone_hours(int) is a new sim-only hook, same shape as
sim_test_show_all_home_pages(): meshcore-solo-site calls it once after
boot with the browser's own timezone offset. Whole hours only
(tz_offset_hours is an int8_t) -- same limit a real device's own
Settings field has.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
A Reset control on a host page (meshcore-solo-site's RESET button,
mesh.html's own Reset buttons) re-invokes the MODULARIZE factory for the
same simInstanceTag to simulate a device restart, since board.reboot()
just exit()s the wasm process (inert / freezes the tab under
-sEXIT_RUNTIME=0). Nothing ever tore down the OLD instance's own
emscripten_set_main_loop() callback, so it keeps ticking forever after
being "replaced" -- and keeps drawing onto the same simInstanceTag-keyed
<canvas> the new instance draws onto too. Two visible symptoms this
caused on meshcore-solo-site: flicker/reversion after resetting the same
device more than once (multiple orphaned instances competing for one
canvas), and -- together with the HomeScreen::poll() fix in 5fbfd7c5 --
would have still left a residual single-old-instance repaint race even
after that fix alone.
sim_stop_main_loop() wraps emscripten_cancel_main_loop() so a host page
can explicitly stop the OLD Module reference right before discarding it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
DataStore::restoreRTCTime() runs on every boot and, if a prior save
exists, overwrites RTCClock with that stale timestamp. Correct on real
hardware (no other way to know the time before a GPS fix or a phone/CLI
sync), but SimRTCClock is already backed by the real host wall clock from
construction -- overwriting it with an old IDBFS-persisted save made a
returning meshcore-solo-site visitor's on-screen clock drift away from
their own real time instead of just showing it. Guarded behind #ifndef
SIM_PLATFORM.
sim_test_show_all_home_pages() is a new sim-only test hook, same shape as
the existing sim_test_* hooks in this file: real hardware ships with a
curated 5-page Home carousel (NodePrefs::HP_DEFAULT) so a first-time user
isn't handed 13 pages to joystick through, with the rest opt-in via
Settings > Home Pages. meshcore-solo-site calls this once after boot to
show the whole feature set instead, without touching the real-hardware
default.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
Code-review pass over the buzzer/sim commits turned up several real bugs,
plus two issues found afterward from manual browser testing:
Rendering (SimDisplayDriverCanvas, variants/sim/SimDisplayDriver.h + target.cpp):
- getTextWidth() measured UTF-8 BYTES (strlen()*6), not codepoints. Since
b067e95b stopped stripping accents, any accented string now measures
double its real width -- mis-centred titles, premature ellipsis/marquee,
badges pushed off-screen. Now uses the real MiscFixedRenderer measurement
(miscFixedTextWidth()), same as SH1106Display/SSD1306Display.
- Added the matching getCodepointWidth() override (O(1) single-glyph
advance), same pattern as SSD1306Display.
- isSingleFont() was left at the base class's `false`, though this backend
only ever renders MiscFixed -- UITask.cpp's status-bar indicator height
keys off this (`lh-2` vs `lh`), so the sim drew it 2px taller than a real
board.
- print() blitted the full 128x64 canvas on every call (dozens per frame,
60fps) -- now tracks a dirty bounding box and only clears/blits the
region actually touched.
Web Audio (buzzer bridge, index.html + mesh.html):
- No AudioContext.resume() -- a context created (or later suspended) in the
'suspended' state (Safari/Firefox, or any browser backgrounding the tab)
stayed silent forever. Now resumed on every gesture.
- linearRampToValueAtTime with no anchoring setValueAtTime interpolates
from the LAST scheduled event, not "now" -- so the anti-click ramps could
effectively snap instead of fading. Fixed with cancelScheduledValues +
setValueAtTime(current) before each ramp.
- mesh.html: a gesture only armed the clicked instance's audio. Click A,
send A->B, and B (the one actually meant to beep on receipt) stayed
silent. Now any gesture arms both A and B.
- RTTTL rests (freq=0, still "playing") now explicitly hold pitch and drop
gain instead of it happening to work by coincidence.
Misc: sim_test_get_num_contacts() was missing the g_sim_ready gate every
other sim_test_* hook has, so it could return a bogus negative count before
setup() finishes seeding num_contacts.
Splash screen missing "Solo <version>" bar: variants/sim never defined
FIRMWARE_SOLO_BUILD (every real Solo board does), so SplashScreen silently
skipped that whole line -- the sim looked like a plain non-Solo companion
build. Added -D FIRMWARE_SOLO_BUILD=1 to platformio.ini and build_wasm.sh.
Verified on a real canvas screenshot: "MESHCORE 1.17.1 / 19 Aug 2026 /
Solo v1.27".
Wasm-fetch error message: "failed to start: RuntimeError: Aborted(both
async and sync fetching of the wasm failed)" is Emscripten's own opaque
message for the single most common real cause -- the page opened via
file://...index.html instead of served over http(s) (fetch() on a local
file is blocked by CORS in both Chrome and Safari, confirmed by reproducing
the exact same error/stack via file://). Both harnesses now detect
location.protocol === 'file:' and show an actionable message with the
one-line fix instead of the raw stack trace.
Battery-set latency: SimMainBoard's battery value is an exact, instantaneous
JS-set integer (see sim_battery_set_mv()), but UITask's battery-check code
polls it every 8s and runs it through an EMA (alpha=0.2) meant to smooth a
REAL board's noisy ADC -- so a value typed into the demo UI could take tens
of seconds to visibly settle. SIM_PLATFORM now checks every 250ms and skips
the EMA (nothing to smooth), since the reading is already clean. Measured
on real canvas pixels: indicator update now lands within one screen-refresh
cycle instead of up to 8s+.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Rounds out the browser sim harness with the rest of the physical board's
interactions: a reset button (JS-driven, since board.reboot() is inert
under -sEXIT_RUNTIME=0), GPS input wired into a real LocationProvider via
new SimSensorManager, JS-settable battery/environment telemetry, an
admin/repeater-login test hook (sendRoomLogin against the default
"password"), and full physical-keyboard text entry (printable ASCII
passthrough into the existing KeyboardWidget, Tab->KEY_KB_ENTER submit).
Also fixes three real bugs found while exercising all of this in a real
browser:
- UITask.cpp's native-only stdin poll branch had no __EMSCRIPTEN__
exclusion, so it also compiled into the wasm build and called a real,
blocking window.prompt() on nearly every frame -- the actual cause of
the reported time/controls jumping. Now gated to native only.
- 'n'/'p' were mapped as Next/Prev keyboard shortcuts, colliding with
typing those literal letters. Removed the shortcuts; added explicit
Next/Prev buttons to mesh.html (previously relied solely on them).
- Buttons grabbed native browser keyboard focus on click, so a later
stray Enter/Space could silently re-trigger a previously-clicked button
(e.g. Reset). mousedown now calls preventDefault() on all buttons.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ports examples/simple_repeater to variants/sim/ (new sim_simple_repeater
native env + build_wasm_repeater.sh) and adds a JS "ether"
(variants/sim/web/mesh.html) that bridges two real companion_radio WASM
instances through a real simple_repeater instance in a strict A<->R<->B
topology (no direct A-B link), proving genuine relay routing rather than
a shortcut.
Also fixes multi-instance issues Phase 2's single-instance design never
surfaced: SimDisplayDriver's canvas context/id caching was keyed on a
single global instead of per-instance, and both wasm builds were missing
_malloc/_free/HEAPU8 runtime exports needed for the ether to poke bytes
into an instance's memory.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New board variant compiling the unmodified MyMesh/UITask/DataStore app
logic against real mesh::Radio/MainBoard/RTCClock/RNG interfaces, for
running the actual firmware outside embedded hardware:
- Native (plain g++, platform = native): ASCII-art display over stdout,
stdin-driven input, local-disk-backed DataStore/IdentityStore.
- Emscripten/WASM (variants/sim/build_wasm.sh, since PlatformIO's native
platform force-overrides any CC/CXX toolchain override back to system
clang++): canvas-backed display, IDBFS-backed persistence across page
reloads, JS-callable input via sim_enqueue_key(), emscripten_set_main_loop.
Real rweather/Crypto (AES128/SHA256/Ed25519) vendored unmodified and
proven working on both targets. variants/sim/web/index.html is a bare
verification harness, not the polished website embed.
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Port the Wio Tracker L1 solo firmware (full on-device UI, dual BLE/USB
companion transport) to Heltec V3 and V4 OLED boards. Neither board has
a joystick or CardKB on-board, so each new env wires up both as optional
peripherals with default pins from what the board leaves free, gated
behind the existing UI_HAS_JOYSTICK/ENV_PIN_SDA+SCL flags.
DUAL_SERIAL was nRF52-only; added an ESP32 helpers/esp32/DualSerialInterface.h
counterpart so the flag isn't silently ignored on these boards. On V4's
native USB CDC, isClientConnected() also honours (bool)Serial (real DTR),
same as the nRF52 version; V3 has no native CDC so it stays BLE-only there.
Screen (SDA 17/SCL 18) and CardKB (SDA 3/SCL 4) confirmed working on real
V4 hardware.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
JakubandClaude Opus 5.5
Scott Powell
Blake Latchford
liamcottle
Michael Graff