Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The solo release job only attached *.uf2 and *.zip, which covered every solo
board back when they were all nRF52. The Heltec V3/V4 .bin images were built
and then silently dropped, so tagging a release produced nothing downloadable
for those two boards.
Releases now carry a single -merged.bin per ESP32 board (bootloader +
partition table + app at 0x0). build.sh also writes an app-only .bin, but
that one needs offset 0x10000 and a bootloader already on the chip, so it's
deleted before upload rather than shipped next to the merged image — flashing
it at 0x0 looks exactly like a bricked device.
Also adds -D ENABLE_SCREENSHOT to both Heltec solo envs. Every other solo env
already had it, so Solo Tools couldn't capture these two boards' displays and
the README's "no special build flags required" was untrue for them. Both envs
rebuilt clean (V3: RAM 58.8%, Flash 43.2%).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The new test_kiss_modem suite needs KissModem headers and sources that
only native_kiss_modem provides. Scope native to test_utils and run both
envs in the unit test workflow.
The solo build already copies firmware.zip (the adafruit-nrfutil DFU package
used for OTA / BLE-DFU updates) into out/, so it was present in the Actions
artifact but never in the tagged GitHub Release. Give it a friendly name
(solo-<ver>-<device>-ota.zip) and include out/*.zip in the release files.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add build-solo-firmwares.yml: auto-detects all _solo_dual envs from platformio.ini, builds in parallel, publishes uf2 files to draft release
- Remove build-wio-tracker-l1-firmwares.yml (replaced by solo workflow)
- Add WioTrackerL1_companion_solo_dual and WioTrackerL1Eink_companion_solo_dual envs
- Wire build-solo-firmwares command in build.sh using _solo_dual suffix
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
README:
- Fix typo "offical" → "official"
- File names in Firmware Variants table now match workflow output
(solo-<version>-oled.uf2 / solo-<version>-eink.uf2)
- Un-comment the E-ink Display section (now fully supported)
- Clock Screen: "sensor values" → "data fields" (covers Batt%, Nodes, Msgs)
- Tools Screen: mention nearby nodes and auto-advert in the highlight
- Promote Screenshot Tool to its own top-level section (was buried under
Contributing); fix `uv run tools/screenshot.py` invocation path
Docs:
- favourites_dial: document the 3rd pin-picker tier (all chat contacts
fallback) added in 0e0e5b93
- clock_screen: Altitude source clarified — onboard sensor (GPS or
barometric), not always GPS
- message_screen: blank lines around image tables that were inlined
Code:
- UITask.cpp: rename leftover plus_y/plus_label locals to solo_y/solo_label
in the splash-screen Solo banner
Workflow:
- workflow_dispatch builds previously labelled firmware with the branch
name (GITHUB_REF_NAME). Resolve BUILD_VERSION to the tag when run on a
tag push, else dev-<short-sha> so manual runs produce
solo-dev-abc1234-oled.uf2 etc.
Cleanup:
- remove stray docs/solo_features/settings_screen/set_scr_1_eink copy.png
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
setup-build-environment was using v${TAG#*-v} which prepended an extra
"v" when the tag already starts with "v" (e.g. v1.11 -> vv1.11).
Now uses the tag name directly for v* tags; strips name-v prefix only
for compound tags like room-server-v1.2.3.
Remove redundant Extract Version steps from the wio firmware workflow
since setup-build-environment already handles this.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add MESHCORE_VERSION build flag ("1.15") to companion base configs.
Splash screen now shows MESHCORE_VERSION in the large text and the
plus firmware version (stripped of commit hash) in the Plus bar,
e.g. "1.15" large + "Plus v1.11 for Wio" below.
Change CI tag pattern to v* and simplify version extraction so tag
v1.11 maps directly to FIRMWARE_VERSION=v1.11.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Trigger workflow on tags matching plus_* instead of wio-tracker-v*.
Extract version as v<x.y> from plus_<x.y> tag format.
Also update firmware filenames in README to match renamed env names.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Rename WioTrackerL1_companion_radio_dual_settings → WioTrackerL1_companion_dual
and WioTrackerL1Eink_companion_radio_dual → WioTrackerL1Eink_companion_dual.
Fix CI workflow: remove hardcoded branch refs so both build jobs check out
the tagged commit; add version extraction to each build job (previously
GIT_TAG_VERSION was only set in the release job, leaving FIRMWARE_VERSION
empty during builds); update build commands to use new env names.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Split the single build job into two independent jobs:
- build-oled: checks out wio-tracker-l1-improvements, builds WioTrackerL1_companion_radio_dual_settings
- build-eink: checks out eink-ui, builds WioTrackerL1Eink_companion_radio_dual
Both artifacts are merged into a single draft release.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Font-switcher is now part of wio-tracker-l1-improvements, so there is
no longer a separate branch to check out. Drop the build-font-switcher
job and its download step in release; a single build produces the
combined dual-BLE/USB + font-switcher firmware.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Build firmware from the font-switcher branch instead of font-lemon.
The font-switcher build includes both Adafruit and Lemon fonts in one
binary with a runtime toggle in Settings > Display.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add build-lemon-font job that checks out the font-experiments branch and
builds with FIRMWARE_VERSION suffixed with -lemon-font, producing files
like WioTrackerL1_*-v1.15-plus.1.7-lemon-font-SHA.uf2. A separate
release job collects artifacts from both builds into one draft release.
Tag pattern narrowed from wio-tracker-* to wio-tracker-v* to avoid
triggering on wio-tracker-lemon-* tags.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
##*- strips to the last hyphen, so wio-tracker-v1.15-plus.1.3 yielded
"plus.1.3" instead of "v1.15-plus.1.3". Switch to #*-v (shortest prefix
ending with -v) which preserves hyphens inside the version string.
Also remove the -Plus suffix appended in build_wio_tracker_l1_firmwares()
since the version scheme already encodes "plus" in the tag/version string,
making the suffix redundant and producing doubled output like "plus.1.3-Plus".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Builds and releases only the _settings companion firmware variants
(USB and BLE) which contain the settings screen with display brightness,
buzzer, TX power, auto-off, GPS interval, timezone, low battery threshold,
and battery display mode.
Triggers on tags matching 'wio-tracker-*' (e.g. wio-tracker-v1.0.0)
or manually via workflow_dispatch. Creates a draft GitHub release.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Resolve conflicts: keep both Ethernet CLI and SenseCAP power-off
button code in repeater, keep both Ethernet docs and power management
CLI docs.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.
- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
JakubandClaude Sonnet 5
Liam CottleandGitHub
ViezeVingertjes
Ryan Gregg
MarekZegare4
Scott Powell
Sefinek
Michael Lynch
Wessel Nieboer
Wessel Nieboer
Ryan Gregg
Scott Powell