ToolsScreen now follows the same rendering convention as QuickMsgScreen
and SettingsScreen: START_Y=12, '>' prefix on selected item, explicit
setColor per item (light fill → dark text for selection).
Bot DM contact picker now filters to favourites-only (flags & 0x01),
consistent with the DM contact list behaviour elsewhere in the UI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The bot can now reply to a specific DM contact instead of a channel.
UI (BotScreen): item 1 cycles through all channels followed by all DM
contacts (ADV_TYPE_CHAT). The label switches between "Channel" / "Contact"
and the value shows the channel or contact name. Left/right/enter navigate
the combined list.
Logic (MyMesh::onMessageRecv): when bot_target_type==1, match the trigger
against incoming DM text and reply via sendMessage(). A 4-byte pubkey
prefix identifies the target; all-zero prefix matches any DM sender.
Persistence: bot_target_type and bot_dm_pubkey[4] appended to prefs with
backward-compat read guard (old firmware defaults to channel mode).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- BotScreen keyboard: add explicit null-terminator after strncpy when
trigger/reply text reaches max length (strncpy skips it in that case)
- BotScreen keyboard: clamp _kb_col to 3 when moving DOWN to special row,
so the cursor doesn't become invisible (col > 3 has no special-row item)
- MyMesh: initialise _bot_last_reply_ms = 0 in constructor (was relying on
BSS zero-init, which is technically UB for a non-trivial class member)
- RingtoneEditor: exit via CANCEL/Save/Discard goes to ToolsScreen instead
of HomeScreen — consistent with BotScreen and expected navigation flow
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New 'Tools' page on the home screen carousel with Ringtone Editor and Auto-Reply Bot items
- Bot settings: enable/disable toggle, channel picker, trigger phrase, reply text (keyboard with pre-fill)
- Bot logic in MyMesh: case-insensitive substring match, 10 s cooldown to prevent reply loops
- Settings: Home Pages visibility control (which carousel pages are shown; Settings and Messages always visible)
- DataStore: persist home_pages_mask and bot fields with backward-compat guards on read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The hardcoded offset numbers were inaccurate from the start (e.g.
autoadd_config listed as //87 but actually at //90) and drifted further
with each new field. The read/write is sequential with no seeks, so the
numbers add no value and only mislead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove mask==0 guard from isPageVisible/homePageVisible/toggle:
mask=0 now correctly means "all optional pages hidden" instead of
silently reverting to all-visible. Initialization always sets 0x01FF
before loadPrefs so 0 only occurs if user explicitly hides everything.
- Simplify toggle handler: direct XOR on home_pages_mask.
- HomeScreen: use navPage(+1) as fallback when current page becomes
hidden, instead of always jumping to i=0.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New "Home Pages" section in Settings lets the user toggle which pages
appear in the home screen carousel. Settings and Messages are always
shown; Clock, Recent, Radio, Bluetooth, Advert, GPS, Sensors, Tools
and Shutdown can each be hidden individually.
- NodePrefs: home_pages_mask uint16_t (bit per page, 0=all visible)
- HomeScreen: isPageVisible/navPage skip hidden pages; dots indicator
counts only visible pages; enforces visible page on re-entry
- SettingsScreen: SECTION_HOME_PAGES with per-page ON/OFF toggles
- DataStore: persisted at offset 1598
- Default: all pages visible (0x01FF)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When UP/DOWN changes pitch or ENTER cycles octave, a short 1/16-note
preview (BPM 240) is played immediately so the user hears the current
note while composing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- RingtoneEditorScreen: 32-note step sequencer accessible via new Tools page on home screen. U/D=pitch, ENTER=octave cycle, L/R=cursor, MENU=options (play, duration, BPM, insert/delete, save). Notes stored packed in NodePrefs and persisted via DataStore.
- ToolsScreen: new "Tools" home page entry launching the editor
- Buzzer volume: 0-4 bar control in Settings > Sound, persisted to prefs
- Buzzer notifications: fixed notify() firing inside wrong serial-guard branch and before addChannelMsg set the channel index
- Unread counter: fixed newest-first index direction; watermark formula now correct
- OLED brightness: wider range via pre-charge register 0xD9 combined with contrast
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- NodePrefs: add buzzer_volume field (0=min..4=max, default 4)
- DataStore: persist buzzer_volume at end of prefs file (backward-compat)
- buzzer: setVolume()/getVolume(); applyVolume() sets PWM duty cycle via
analogWrite() after each rtttl::play() call to control output amplitude
- Settings UI: new BzrVol bar item in Sound section (left/right to adjust)
- UITask: apply saved volume on startup alongside brightness
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- MyMesh: notify() now always fires for channel/contact messages regardless
of serial connection; called after addChannelMsg so channel index is set
- ChannelHist: fix unread watermark direction (histEntry is newest-first,
index 0=newest); counter now decrements correctly as user reads messages
- ChannelHist: reset unread to 0 after sending (user is active in channel)
- SH1106Display: add pre-charge register (0xD9) to setBrightness for wider
dimming range; re-apply contrast+precharge in turnOn(); tune curve
- UITask: remove MsgPreviewScreen dead code (~180 lines, never shown)
- UITask: fix strcpy→snprintf in showAlert()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- SensorManager::getAvailableLPPTypes() reports which LPP types will be
present based on initialized sensor flags (temp, humidity, pressure, etc.)
- Sensors page renders one row per available type; shows "--" for any sensor
that hasn't produced a reading yet instead of hiding the row entirely
- LPPReader: add readLuminosity, readPercentage, readConcentration, readDistance
- All known LPP types now have proper names and units in the sensor display
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
buzzer.play() was returning early when _is_quiet=true, so channels with
explicit notification=ON were silent even though the logic correctly set
play=true. playForced() bypasses the quiet check for these overrides.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Unread badge now clears gradually as the user navigates through messages
instead of instantly on channel entry; counter tracks the highest-seen
message watermark so navigating back doesn't re-add unread count
- Fullscreen view: LEFT/RIGHT switch between messages in the thread (resets
scroll); < > arrows shown at bottom corners when adjacent messages exist
- Navigating in list (UP/DOWN) or entering fullscreen also marks messages read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- msgRead(0) now only navigates to home when curr == msg_preview, preventing
unexpected redirects while the user is in the chat selection screen
- Fullscreen message view: LEFT/RIGHT navigate between unread messages (resets
scroll to top); < > hints shown at bottom corners when more messages available
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DataStore: persist custom_msgs, ch_notif_override/muted, dm_show_all,
room_fav_only — none were being saved/loaded, all settings lost on reboot.
Load uses file.available() guard for backward compat with old saves.
- QuickMsgScreen reset(): clear _ctx_open/_ctx_dirty/_ctx_sel so context
menu state is clean when re-entering the messaging screen.
- Remove unused _ctx_ch_idx field (code always uses _channel_indices[_channel_sel]).
- _room_unread: cap at _msgcount before incrementing to prevent badge
going negative (getMsgCount() - getRoomUnreadCount()).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
savePrefs() is now called once when the user closes the menu with
Back/Cancel, only if the notification state was actually changed
(_ctx_dirty flag). Toggling multiple times before closing still
results in a single write.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- newMsg() now takes contact_type; room server messages (ADV_TYPE_ROOM)
tracked separately in _room_unread; DM badge = msgCount - roomUnread
- MODE_SELECT shows unread badges for all 3 rows: DM, Channels, Rooms
- Room unread cleared when user opens Room Servers list or msgRead(0)
- Channel context menu: ENTER performs action but stays open; only
CANCEL (Back button) closes it so user can see the updated state
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds SECTION_CONTACTS with two items under Settings:
- DM: "fav" (default) / "all" — controlled by dm_show_all in NodePrefs
- Rooms: "all" (default) / "fav" — controlled by room_fav_only in NodePrefs
Both fields default to 0, preserving current behaviour on firmware upgrade.
buildContactList() reads the prefs to filter accordingly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds ADV_TYPE_ROOM contacts as a selectable category in the MODE_SELECT
screen. Reuses the existing CONTACT_PICK → MSG_PICK → send flow via a
_room_mode flag; sendMessage() works identically for room servers.
All room server contacts are listed (no favourites filter).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Sums getMsgCount() (DM unreads) and getTotalChannelUnread() (sum of
_ch_unread[] across all channels) and displays "N unread" under the
"Messages" heading when non-zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Moved UI_HAS_JOYSTICK_UPDOWN=1 from _settings-only variants to the
WioTrackerL1CompanionBLE and WioTrackerL1CompanionUSB base configs.
The hardware always had the up/down buttons; the flag was only in
_settings as a temporary testing boundary.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The contact picker now lists only contacts of type ADV_TYPE_CHAT
that have the favourite flag set. Shows "No favourites" when none
are starred. Asterisk prefix removed since all entries are favourites.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-pressing ENTER on a channel in the channel picker opens a
2-item context menu: "Mark all read" and "Notif: default/OFF/ON".
Muted channels still increment the unread counter silently; force-ON
overrides global buzzer mute. Settings persist to flash via NodePrefs
(ch_notif_override / ch_notif_muted bitmasks).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix placeholder picker colors: dark box + white border, light fill
for selected item (consistent with rest of UI)
- Fix placeholders not expanded when sending from keyboard (expandMsg
was only called in MSG_PICK path, not KEYBOARD path)
- Fix sent messages incrementing unread counter: set _phase=CHANNEL_HIST
before addChannelMsg so viewing=true
- Fix keyboard column inverse mapping on UP from special row
- Remove old_row dead code from QuickMsgScreen keyboard handler
- Alert banner shown only on home screen, suppressed in settings/messages
- Bump FIRMWARE_VERSION to v1.15.1
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Settings → Messages section: 10 user-editable message slots (M1–M10)
with on-screen keyboard editor; slot M1 defaults to "OK" on first boot
- Keyboard: add Caps Lock [^] button — stays highlighted when active,
all letters display and insert as uppercase until toggled off
- Keyboard: add [{}] placeholder picker overlay — inserts {loc} or {time}
into the message at cursor position; available in both compose and
settings slot editor
- Max message length raised to 139 chars to match the companion app;
ChHistEntry text buffer extended to 140 chars
- NodePrefs: custom_msgs slot size extended to 140 chars per slot
- KB constants (KB_MAX_LEN, KB_CHARS, etc.) moved before SettingsScreen
so both SettingsScreen and QuickMsgScreen can reference them
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- QuickMsg → Message screen: channel history, on-screen keyboard, custom message first
- Channel history: RAM ring buffer (32 entries, 80 chars), fullscreen view with word-wrap scroll
- After channel send: stay in history, own message shown as "Me: ..."
- MsgPreview: one message per screen with up/down nav, ENTER opens fullscreen scroll
- Monochromatic display: all color usage corrected to DARK/LIGHT only
- Top bar: battery icon, BT muted indicator, splash "Plus for Wio"
- KB_MAX_LEN: 64 → 100 chars; channel text buffer: 52 → 80 chars
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UI_SENSORS_PAGE=1 activates the existing sensor display screen in
HomeScreen — shows temperature, pressure, humidity, voltage and other
LPP-formatted sensor data from connected I2C sensors (BME280, etc.).
BME280 support is already included via sensor_base build flags.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add FIRMWARE_PLUS_BUILD compile flag to both companion sections in
platformio.ini. When set, SplashScreen shows "+ unofficial build" in
yellow below the build date. Avoids runtime string parsing — the
existing version stripping logic (cuts at first dash) is unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
build.sh sets FIRMWARE_VERSION via PLATFORMIO_BUILD_FLAGS — hardcoding
it in platformio.ini caused a macro redefinition conflict. Instead,
build_wio_tracker_l1_firmwares() now appends "-Plus" to the env var
before calling build_firmware(), so the final version string becomes
e.g. v1.15.0-Plus-abcdef.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Override the upstream FIRMWARE_VERSION define via build_flags so all
companion radio builds (USB and BLE) show "v1.15.0-Plus" on the splash
screen. The #ifndef guard in MyMesh.h makes this override automatic.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Track dirty state per-field in handleInput. savePrefs() on exit only
if at least one value was actually modified. Buzzer is excluded — it
already saves immediately via toggleBuzzer(). markClean() resets the
flag each time the settings screen is opened.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
lowBatIndex(), autoOffIndex(), gpsIntervalIndex() each called
getNodePrefs() independently without null check, while renderItem()
had its own guarded copy. Added null checks consistent with the rest
of the class. Also initialize _node_prefs to NULL in UITask constructor.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace linear voltage-to-percent formula with a LiPo discharge curve
lookup table and linear interpolation. The curve is then rescaled so
that low_batt_mv (configurable shutdown threshold) maps to 0% and
4200mV maps to 100%, preserving the non-linear shape regardless of
the chosen threshold.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Filter contact list to ADV_TYPE_CHAT only — excludes repeaters, rooms,
and sensors which cannot receive direct chat messages.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Favourite contacts (flags & 0x01 set by companion app) appear at the
top of the contact picker, marked with '*'. Non-favourites appear
below. The favourite bit is already synced by the existing protocol
via CMD_ADD_UPDATE_CONTACT — no protocol changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Watchdog: nRF52840 hardware WDT with 30s timeout, runs during sleep.
Resets device if main loop stalls for >30s. Pets in every loop()
iteration so normal operation never triggers it.
QuickMsgScreen: new UI screen accessible from home screen pages.
Two-phase UI: contact picker (shows all contacts with hop count),
then predefined message picker (location, I'm OK, need help, on my
way, ETA 10min, ETA 30min). Location message uses live GPS fix if
available. Sends via the_mesh.sendMessage() and shows sent/error alert.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- CPU sleep: board.sleep(0) in main loop puts NRF52 into WFE/sd_app_evt_wait
between iterations; wakes on any interrupt (radio, BLE, timer). Largest
power saving of the three changes.
- VBAT_ENABLE gating: voltage divider now powered only during ADC read
(HIGH for 10ms, then LOW). Previously stayed HIGH continuously.
Fixed in both variant.cpp (init) and WioTrackerL1Board::getBattMilliVolts().
- LED off with display: PIN_LED is cleared when auto-off triggers and
restored (handed back to userLedHandler) when display wakes. Avoids
idle LED current draw during screen-off periods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Builds and releases only the _settings companion firmware variants
(USB and BLE) which contain the settings screen with display brightness,
buzzer, TX power, auto-off, GPS interval, timezone, low battery threshold,
and battery display mode.
Triggers on tags matching 'wio-tracker-*' (e.g. wio-tracker-v1.0.0)
or manually via workflow_dispatch. Creates a draft GitHub release.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds suffix matching for WioTrackerL1 _settings builds (with settings screen)
so they are picked up automatically by the companion firmware build workflow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
