Cut restated points, hedge phrases and over-explained asides throughout
-- same information, fewer words per sentence. Also fixed a stale gap
in README's "Building from source" env table (Cardputer ADV and
T-Echo Lite + KeyShield were missing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Swaps which physical input plays which role on the Heltec V3/V4 wired
joystick: the stick's own fifth "press" contact now drives Enter (your
thumb's already on the stick when you'd confirm something), and the
onboard PRG button -- previously Enter -- becomes Back instead, so it
no longer needs a separate wired button of its own.
Pure pin reassignment in the solo_dual envs, no UITask.cpp changes:
PIN_USER_BTN (Enter) is undef'd and redefined from the base env's PRG
default to the joystick's press pin, and PIN_BACK_BTN takes PRG's old
GPIO0. Scoped to just these two envs -- Wio Tracker L1/GAT562/MeshTiny
share the same UI_HAS_JOYSTICK code path with PRG already correctly
wired as their one true physical button, so their behaviour is
untouched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Follow-up to the UI casing unification -- the docs quoting these same
option values (Settings' Auto-lock/Buzzer/Full refresh/Low battery/GPS
pwr/Resend rows, Tools' Auto-pause/Mark avg/Auto-save/Auto-Advert/
Heartbeat/GPIO rows, and the clock alarm's Repeat cycle) still showed
the old lowercase/Title-case spellings the screens themselves no
longer use.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
README's Supported Devices table and Flashing section gain the
Cardputer ADV and T-Echo Lite + KeyShield rows/headings (both marked
experimental, matching release-notes.md and the Heltec V3/V4 entries).
external_keyboard.md gets a new section for their built-in TCA8418
keypads -- a separate mechanism from CardKB, not documented anywhere
before. settings_screen.md's GPS pwr row now lists !gps fix among the
things that hold GPS continuously on, matching the actual code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Settings screen doc gets the new "GPS pwr" row and a watchdog note on
"Pwr save"; Diagnostics doc gets the new "RXPS wd s/h" row and updates
what "Reset counters" actually clears; release-notes.md gets Unreleased
entries for all three additions from the prior commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
README had drifted from the firmware in several places:
- Supported Devices listed only the three nRF52 boards; Heltec V3/V4 were
missing entirely, as was any mention that ESP32-S3 flashes differently.
Flashing is now split per MCU, with the merged-vs-app-only .bin trap
spelled out — that one costs an afternoon to diagnose from a dark screen.
- It advertised a Lemon/Default font switch that was retired in v1.23; there
is one unified misc-fixed 6x9 font now and no font setting at all.
- tools/README claimed ENABLE_SCREENSHOT had to be added by hand, directly
contradicting README's "no special build flags required". The envs have
carried the flag for a while; rewrote the file to cover all four tools.
- "S key for screenshot" described screenshot.py's menu, not the device —
screenshots are driven entirely from the host via CMD_GET_SCREENSHOT.
Structurally, general notes (factory reset on migration, BLE-over-USB
priority) sat at the tail of the ESP32 subsection and read as ESP32-specific;
they're now placed where they apply. Heltec wiring moved out of Supported
Devices into its own section so the device table stays scannable, and the
Solo Tools heading is no longer a link (it was generating a garbage anchor).
New docs/solo_features/external_keyboard.md covers CardKB and the wired
joystick: shortcut table, Full vs Compact, and the pin assignment. The pins
are marked as verified on real V4 hardware only — V3 inherits them from
Heltec's documented pin-compatibility and hasn't been checked on a board.
FEATURES.md (roadmap + code audit, developer-only) moves to
docs/development/roadmap.md; nothing referenced it by path.
Adds Building from source / Releasing / Repository layout, since the release
flow was only discoverable by reading the workflow.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents
this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
- Bot Actions (!buzz/!gps/!advert/!gpio1-4) ran their side effect
immediately during botScanCommands(), before quiet-hours/cooldown/
per-contact throttle were checked -- those gates only suppressed the
reply text, not the actual buzz/GPS toggle/advert/pin write. botCommandReply()
now only records what was requested; applyPendingBotActions() runs the
deferred effects once a wrapper's throttle checks pass and the ack sent,
mirroring the existing _locfix_requested pattern. resetPendingBotActions()
clears everything on every throttled/aborted path.
- CardKB's Fn+<letter> accent-popup shortcut bypassed the locked-input gate
(it called into KeyboardWidget directly instead of through the
enqueueKey()/dequeue path every other key uses, so it wasn't discarded
while _locked). Now checks _locked itself.
- Since a locked device now correctly ignores CardKB entirely, Fn+Esc
(single press) is added as CardKB's own lock/unlock gesture -- otherwise
a CardKB-only setup had no way to unlock. Esc rather than the adjacent
Fn+Backspace, to avoid an accidental press.
- botScanCommands() now parses up to two arguments per command instead of
one. Used by "!gps fix [seconds]" to override the default 90s timeout
(clamped 15-300s) for a poor sky view where 90s isn't always enough to
reach isLocFixReady()'s HDOP/satellite bar.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Turns GPS on (if it wasn't already), waits for a stabilised fix
(isValid() + >=8 satellites, then averages 10s of readings), sends the
position, and restores GPS to whatever state it was in before -- up to
a 90s timeout, after which it reports a partial fix (if it got any
samples) or plain failure.
Replies in two parts since a fix takes seconds-to-minutes, unlike every
other bot command here: an immediate "acquiring fix..." ack (through
the existing synchronous command path), then the actual position as a
separate follow-up message once ready, delivered to whichever
destination (DM/room/channel) the request came from. Only one fix can
be in flight at a time -- a second request while one is pending gets an
immediate "already pending" instead of silently replacing it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The bot outgrew "auto-reply" once it gained Actions (!buzz/!gps/!advert/
!gpio1-4) that control device hardware remotely, not just answer messages.
Renames the Tools screen entry and all doc cross-references; already-shipped
release notes (v1.23) are left as-is to match what actually shipped under
that name.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
"+ Add channel" jumped straight into a generic Name+Secret form, so the
"hashtag channel" convention documented in docs/companion_protocol.md
(secret = first 16 bytes of sha256("#topic")) was only reachable by
already knowing to type a literal "#topic" into the passphrase field --
nothing in the UI surfaced it. The phone app instead shows an explicit
channel-type picker; this adds the same on-device.
"+ Add channel" now asks Public / Hashtag / Private first:
- Public commits immediately with the well-known default channel's name
and secret (8b3387e9c5cdea6ac9e5edbaa115cd72, confirmed to match
MyMesh.cpp's PUBLIC_GROUP_PSK and the docs' published key) -- useful
to restore it if deleted.
- Hashtag shows a single Topic field; Save synthesizes name="#topic" and
derives the secret via the existing SHA-256 passphrase path -- same
underlying mechanism Private already had, just discoverable without
knowing the "#" convention.
- Private is today's manual Name+Secret form, unchanged.
Editing an existing channel skips the picker (no ambiguity to resolve
there). Extracted hexToSecret() out of deriveSecret()'s hex-mode branch
so Public's fixed key parses through the same code instead of a second
hand-rolled loop. No other file needed changes -- openAdd()/openEdit()/
active()/render()/handleInput() keep their existing signatures.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Page 0 was hardcoded to Latin -- Cyrillic/Greek could only ever be the
second, cycled-to page. Settings > Keyboard's Alphabet row splits into
Main (which script the keyboard opens on by default) and Additional
(the second one reached via #@/abc), so a Cyrillic/Greek typist can make
their own script the default instead of always landing on Latin first.
Setting Additional equal to Main collapses back to a 2-page cycle (that
script + Symbols), same rule the old Latin-hardcoded design already used
implicitly.
KeyboardWidget.h: cellStr()/t9GroupStr() now dispatch through
scriptCellStr()/scriptT9GroupStr(), treating Latin as an ordinary peer of
Cyrillic/Greek instead of a special case; scriptHint() replaces
altAlphabetHint() so the #@/abc key's "next page" hint is correct
regardless of which script that lands on; the accent popup's gating
checks the current page's actual script instead of assuming page 0 is
always Latin. Removed the now-dead pageIsAltAlphabet().
NodePrefs gains keyboard_main_alphabet (schema sentinel 0xC0DE001F ->
0xC0DE0020, same append-at-tail/clamp-on-load pattern as every prior
schema growth this file uses). Verified via a real build that the new
field lands in existing tail padding -- sizeof(NodePrefs) is unchanged
at 2712.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the 8 separate Latin-diacritic alt-alphabet pages (Polish, Czech,
Slovak, German, French, Spanish, Portuguese, Nordic) with one popup: Hold
Enter on a Latin letter that has accented variants (a c d e i l n o r s
t u y z) opens a floating horizontal strip of that letter's accents,
anchored over its own row so the grid stays visible underneath (LEFT/
RIGHT picks, Enter inserts via a new shared insertGlyph() helper, Cancel
dismisses). Holding a letter with no variants is a no-op. Cyrillic/Greek
remain full alt-alphabet pages; NodePrefs::keyboard_alt_alphabet shrinks
from 11 to 3 values accordingly -- an old saved Polish..Nordic value just
clamps to Latin via DataStore.cpp's existing range check, no migration
code needed.
Freeing Hold-Enter on letter cells required moving cursor-mode's own
trigger: UP from the top letter row now enters it instead of wrapping to
the special row. To keep that wrap reachable, cursor mode's UP/DOWN
(Home/End) continue the wrap once already at that boundary -- UP again
lands on the special row, DOWN again back on the letter grid -- reusing
the same proportional column mapping the old direct wrap used.
Diagnostics' font-coverage sample swaps its 8 per-language lines for one
line sampling the new accent table. Docs (message_screen, settings_screen,
solo_ui_framework) and release-notes updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reordered BotScreen's carousel to Channel / Room / Direct / Other and
made Channel the default opening tab, per feedback that the screen
should start from the first tab shown. Docs updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Logging in to a room server (first-time prompt or a remembered password) used
to leave the user on the room list, needing a second Enter to open the chat.
onRoomLoginResult() now opens the room history on success via a shared
openDmHistory() helper (extracted from the Enter-on-contact path).
The login result is async, so the auto-enter is gated on the user still being
on that room in the picker: phase CONTACT_PICK, room mode, no context menu /
share / pick-target sub-flow active, and the result pubkey matching the
selected contact. Otherwise it stays put (no yanking the user into a screen
they navigated away from).
Resolves the "auto-enter after login" code-review item. Builds green:
WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
T9 keys now read like a phone keypad — each cell is labelled <digit><group>
(e.g. 2abc), with the digit matching what the multi-tap cycle lands on after
the letters. No separator space: the widest group (".,!?'-") plus the digit
already fills a narrow 128px OLED cell at 3 columns.
Also fills in the v1.22 release notes (T9 keyboard, trail auto-save, Clock
Tools in Tools, Map/Shutdown reorderable, battery-read fix, the UI-audit fix
batch, discover-dedup, favourites self-heal, preset-name placeholder, OLED
frame-skip, e-ink full-refresh) and syncs the solo-feature docs: new Keyboard
settings section, Trail Auto-save row, and Clock Tools reachable from Tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- release-notes v1.21: add Clock tools (alarm/timer/stopwatch) to What's new,
e-ink button responsiveness + double-tap debounce to Fixes, and the input
edge-capture/key-queue and hardware-timer ringtone notes to Under the hood.
- README: note clock tools on the Clock Screen entries.
- solo_ui_framework: document the hardware->handleInput path (mandatory
begin() per button, IRQ edge capture, key queue + coalesced redraw).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a Clock Tools screen (Enter on the home Clock page) with three time
utilities, plus the engine that drives them from UITask::loop() so they
work regardless of the current screen / display state:
- Alarm: a single one-shot wake alarm. Persisted in NodePrefs as a local
time-of-day; UITask schedules it as an ABSOLUTE fire instant recomputed
from that time, so it survives RTC re-syncs (mesh/app/GPS/CLI all jump
the clock) — small corrections still fire on time, a jump over the
target still fires (late, up to 6 h). Disarms after firing. A bell
icon signals an armed alarm on the clock face and the top status bar.
- Timer: a millis-based countdown (sync-immune), big HH:MM:SS readout,
rings even when off-screen.
- Stopwatch: millis-based, keeps running in the background.
Numeric fields use the shared framework DigitEditor (digit-by-digit,
min/max enforced). The alarm/timer/ring engine lives in UITask alongside
the locator/live-share engines (no screen-cast for time-critical logic).
E-ink: live readouts refresh coarsely (and on any key); timing is exact
regardless, and the countdown's buzzer fires on time. Rings override mute
and are dismissed by any key (auto-stop after 1 min). Cannot wake from a
full Shutdown (CPU/RAM powered down).
NodePrefs: +alarm_on/alarm_hour/alarm_min (fit existing tail padding,
sizeof unchanged 2488), SCHEMA_SENTINEL 0xC0DE0016 -> 0xC0DE0017,
DataStore read/clamp/write in lockstep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add Tools › Trail → Hold Enter → Track back (shown when the trail has ≥2
points). It reuses NavView but, instead of a single fixed target, snaps onto
the route at the nearest recorded breadcrumb and walks the points in reverse,
auto-advancing the target as each is reached (within 20 m). The header shows
points remaining ("Back: 12 pt" → "Trail start"); reaching the start toasts
"Back at start" and exits. Cancel leaves at any time.
Lives in WaypointsView as a new sub-mode; advancement runs in poll()
(forwarded from TrailScreen) so it tracks GPS independently of the render
cadence. An EtaTracker drives the approach/ETA line and is reset on each
breadcrumb advance to avoid a bogus closing-speed spike.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a "Mark avg" trail setting (Off/5/10/30 s). When set, Tools › Trail ›
Mark here samples the GPS fix once a second for the chosen window and stores
the mean position instead of one instantaneous fix — a steadier, more
accurate mark for a precise spot. A progress screen shows time left + sample
count; Cancel aborts; the window then opens the label keyboard as usual.
Off (default) keeps marking instant.
Sampling runs in WaypointsView::poll() (forwarded from TrailScreen::poll())
so it ticks on the main loop, independent of the slow e-ink render cadence;
int64 accumulators avoid overflow over 30 samples.
Persisted as NodePrefs::gps_avg_idx (schema 0xC0DE0016): struct field +
option table, DataStore rd/write/clamp in lockstep. sizeof unchanged (the
uint8_t fits existing tail padding) so the 2488 tripwire still holds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three spots lagged the recent refactors:
- §8 + §10 still taught the inline `if (_dirty) { savePrefs(); _dirty=false; }`
pattern; now point at `_task->savePrefsIfDirty(_dirty)`.
- §1 wiring contract now notes the nullptr-init / setCurrScreen null-guard
fail-safe (steps 1/3/4 are compile-checked, only a missed `new` slips through).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every drawList/AccordionList row opened with the same hand-written
display.drawSelectionRow(0, y-1, width-reserve, lineStep-1, sel) line —
14 copies of the same geometry and magic offsets. Add a drawRowSelection(d,
y, sel, reserve) helper in icons.h next to drawList and route the canonical
sites through it (Bot/LiveShare/Locator/Repeater/Settings/Tools/Nearby/
QuickMsg/Waypoints).
Rows that intentionally differ (full-width DashboardConfig/QuickMsg, the
keyboard/ringtone grids) keep their explicit drawSelectionRow() call — the
helper is opt-in rather than baked into drawList, so legitimate variants
aren't forced into one geometry. Framework doc updated to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the ad-hoc enter()/markClean() entry methods (which lived outside
the UIScreen interface and were invoked via casts from each gotoX) with a
virtual onShow() lifecycle hook called centrally by setCurrScreen().
This removes the "forgot to call enter() in a new navigator" footgun and
the unchecked cast smell: 12 navigators collapse to one-line
setCurrScreen(x) calls, and override enforces signature match. Two entries
that carry a parameter/variant keep an explicit typed call after
setCurrScreen(): RingtoneEditor::selectSlot(slot) and TrailScreen::showMapView().
Behaviour-preserving: only screens that previously had enter() get an
onShow() override; Splash/Home/QuickMsg/Diag keep no reset as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ui-new/*.h screens are header fragments compiled only as part of
UITask.cpp, in include order. Two implicit rules a contributor can trip on:
include order (a static inline helper / shared scratch is visible only to
later fragments) and single-TU-only (some fragments define external-linkage
symbols at file scope, e.g. NearbyScreen::FILTER_LABELS, so reusing one from a
second .cpp is a duplicate-symbol link error).
Spell both out in a contract comment at the inclusion block, and raise the
single-TU note to a callout in the framework guide. Comments only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the reusable building blocks the solo UI has grown — the UIScreen
model and screen wiring, DisplayDriver layout metrics, drawList/AccordionList,
the popup/keyboard/digit-editor/fullscreen/nav components, the geo + state-store
+ persistence helpers, mini-icons, input conventions, and the cross-cutting
gotchas (single-thread render, e-ink pacing, reference cleanup). Ends with a
worked "add a new Tools screen" example.
No code change; the helper layer is already well-factored (the recent dedup
passes closed the remaining gaps), so this captures it for contributors rather
than extracting more. Linked from the README docs table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
onContactOverwrite() (the contact-table-full LRU eviction path) deleted the
contact's blob and notified the companion app, but never called the new
onContactRemoved() cleanup -- so a Favourites Dial slot, Locator target, or
Live Share target could still go stale, just via the silent auto-evict path
instead of an explicit removal. This is likely the main real-world cause of
the "(gone)" tile the docs described, since auto-eviction happens far more
often than an explicit CMD_REMOVE_CONTACT.
Also sync the two docs that described the old (now wrong) behaviour:
Locator's "survives delete" claim, and Favourites Dial's "(gone) until
reassigned" claim.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MarekZegare4andClaude Sonnet 5
JakubandClaude Sonnet 5
Scott Powell
DG1TAL
Talia
Liam CottleandGitHub
Alexander Hoffer
ViezeVingertjes
Ryan Gregg
Will Dillon
HDDen