JakubandClaude Opus 5.5
b5e4845dae
The quick panel, as a phone's: pulled down from the status bar (or a tap on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a tap; Advert opens the advert popup (moved here from the Nodes header); Lock locks the screen; a brightness slider. Holding a tile opens its settings. Lock and sun glyphs added to the fonts. Fixes from rc1 testing on the L2: - GPS status icon: none when GPS is off (the module kept its last fix valid, so it stayed green); grey on, green with a fix. ensureGps() turns GPS on before trusting that stale fix. - Screen wake: the panel wakes dark, a frame is drawn, then the backlight fades in -- no white flash. Off fades out first. - Power off / flat battery: the chip wakes every 30 s to look for USB power and starts when plugged in (it slept with no wake source before, until the reset button). Plugged in when switched off: stays off until re-plugged. - Message ages in a conversation refresh every 2 s, as on ui-new; the message popup keeps its age, repeaters heard and delivery up to date. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
3.8 KiB
Getting started
Controls
On joystick devices:
| Input | Does |
|---|---|
| Up / Down | Move through a list |
| Left / Right | Switch home pages; change the value of a setting |
| Enter | Open, select, confirm |
| Hold Enter | Options for the selected item (a message, contact, channel…) |
| Back | One step back; from a screen, back to the home screen |
Lists wrap around at both ends. Any key wakes a dark screen without acting on it.
Keyboard devices use the same controls, from the arrow keys (or their Fn combinations), Enter and Esc. Hardware has the key maps.
Note
Wio Tracker L2: tap to open, hold for options, swipe sideways between pages. The top button turns the screen off and on. The side button goes back to the home screen; hold it and let go to mute or unmute the sound. Holding the side button while pressing the top one takes a screenshot.
Home screen
The home screen is a row of pages. On joystick devices, Left / Right steps through them (on Favourites it moves between the slots first). The default order:
| Page | Shows |
|---|---|
| Clock | The time, the date and up to three fields of your choice; Enter opens the clock tools |
| Favourites | Six slots for the conversations you open most (Contacts) |
| Status | Radio, GPS, battery and mesh at a glance; Enter opens the Status screen |
| Bluetooth | Bluetooth on / off and the phone: connected, or the pairing PIN |
| Advert | Send an advert now, and the auto-advert interval |
| Settings | Brightness, GPS on / off, then all settings |
| Map | Your position, the trail, people sharing theirs and the target (Navigation) |
| Tools | The two tools you used last with their state, then all tools |
| Messages | The two latest conversations with their unread counts, then all messages |
| Shutdown | Lock the screen, or hibernate (with the battery level) |
Most pages are quick panels: a few rows and a last one that opens the full screen. Up / Down picks a row and Enter acts on it. A value row (brightness, auto-advert) goes into editing: Left / Right change it while you watch, Enter or Back keeps it.
Settings › Home Pages sets their order and hides the ones you don't use; Settings and Messages are always shown.
Note
Wio Tracker L2: pages you swipe between: favourite chats, the clock (where it starts), a minimap, then the apps, six to a page. Hold an app to arrange or hide them.
Pull down from the status bar (or tap it) for the quick panel: Bluetooth, WiFi, GPS, sound, trail and live share switch at a tap, Advert sends an advert or sets the automatic one, Lock locks the screen, and the slider sets the brightness. Hold a tile for its settings. Swipe it up, or tap below it, to put it away.
Connecting the phone app
Every build serves the MeshCore app over Bluetooth and USB, one at a time: while Bluetooth is connected, USB is ignored. To use USB, disconnect Bluetooth first or turn it off on the device.
The Bluetooth pairing PIN is shown on the Bluetooth home page until the phone is paired.
Note
Wio Tracker L2: the PIN is under Settings › Bluetooth.
Everything you do on the device and in the app stays in sync: contacts, channels and messages are the same data.
Updating
Download the new file from the releases page and flash it the way you did the first time (see the main README). Settings, contacts and messages are kept.
Note
Wio Tracker L2: Settings › Firmware update checks GitHub for a newer release and installs it over WiFi. Set up a network under Settings › WiFi first.