Author mini-icons as ASCII-art rows packed to bytes at compile time via
constexpr packRow(), so the glyph shape is visible in source while the
binary holds only the packed bytes (strings never reach flash, identical
to the previous hand-written hex).
Bundle each icon's width/height with its data through MiniIcon and the
MINI_ICON(name, width, ...) macro, so draw sites carry no magic numbers:
miniIconDraw(d, x, y, ICON_CHECK). Also add an unused-by-design skeleton
for full-size page icons (≤32 px): packRow32 / BigIcon / BIG_ICON /
bigIconDraw, for authoring a future big glyph the same readable way.
Existing XBM bitmaps left untouched.
Flash size unchanged; verified no ASCII-art strings reach the .elf.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the many scrollable filter/sort categories and inconsistent popups
with a single list / detail / action-menu path over two sources (stored
contacts and live discover scan). Filter (type) and sort are independent
axes: LEFT/RIGHT cycle the type filter, the action menu's Sort row is
adjusted in-place with LEFT/RIGHT (not Enter). The active filter is shown
in the SCAN title and empty-list messages distinguish "no contacts" from
"filtered out". Filter/sort persist across re-entry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tidies the Trail screen end to end, with no functional change beyond the
intended UX cleanups. Squashed from refactor/trail-screen.
Popup:
- Two-level action menu (Hold Enter): short main menu (Start/Stop, Mark
here, Waypoints…, Trail file…, Settings…) plus "Trail file…" and
"Settings…" submenus, replacing one flat ~12-item list that mixed
settings and actions. One interaction pattern per level; Reset lives in
Trail file…, away from a stray Enter. Settings submenu is view-aware
(Grid only on Map, Readout only on Summary).
Map:
- MapProjection (geo→pixel) built once and shared by the map, grid and
marker drawing — removes the duplicated projection math and renderGrid's
11 scalar params.
- renderMap split into computeBounds() and drawMarkers() helpers.
Grid:
- Square cells fitted to the frame: the shorter side is divided into a
whole number of equal cells (grid touches that pair of borders), and the
longer side centres the whole cells that fit — square, symmetric, no
one-sided drift. Drawn as one dot per intersection (legible on OLED).
Waypoints:
- Extracted the whole waypoint management UI (list / navigate / add-by-
coords / mark / rename / delete / send) into a self-contained
WaypointsView component that TrailScreen owns and delegates to.
- Dropped the redundant bulk "Clear all" (per-waypoint Delete covers it).
Docs updated (tools_screen.md) + design rationale (docs/design/
trail_redesign.md). Builds clean on solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
End-to-end delivery indicators on the device UI, drawn next to outgoing
messages and auto-scaled to the font (legible on landscape e-ink).
DM (and room servers, which share the DM path):
- Pending / delivered / failed marker driven by the real end-to-end ACK.
Pending shows a row of dots — one per send — so auto-resend progress is
visible before it resolves to ✓ / ✗.
- Auto-resend: new pref dm_resend_count (0-5, default 2), Settings ›
Messages › Resend. A pending DM whose ACK times out is re-sent (reusing
the original timestamp) until resends run out, then ✗. Driven from
UITask::loop so it completes in the background, independent of screen.
- Incoming dedup: a retry reuses the sender timestamp + text but carries a
fresh packet hash, so addDMMsg drops copies matching prefix+ts+text.
Channels (flood, no recipient ACK):
- ✓ only once a repeater echo confirms the send was relayed into the mesh;
no echo is normal, not a failure (no pending/fail shown). A small ring
tracks a burst of sends so each matches its echo. Receive-path hashing is
gated so the hot flood path is untouched when idle.
Shared:
- Markers shown in both the history list and the fullscreen message view.
- Reusable scalable mini-icon facility in icons.h (bitmap + auto-scale);
adding a new status icon is a bitmap plus one draw call.
No changes to the upstream mesh library (src/).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Persist.h: shared writeHeader()/readHeader() for the magic+version+count
on-disk header; Waypoint and Trail snapshots now share one implementation
(byte layout unchanged; each keeps its own count clamp/reject + extra fields).
- TrailScreen: pushAction() guards _act_map / PopupMenu capacity, so adding a
new action can't silently overrun the fixed array.
- PopupMenu: add count()/setSelected() accessors; replace the remaining direct
_sel/_count field pokes in NearbyScreen, TrailScreen and QuickMsgScreen.
- Trail summary: unit-suffixed time ("1h 05m" / "5m 03s") so hours can't be
misread as minutes.
- Trail::haversineMeters delegates to geo::haversineKm — single Haversine
implementation (also trims a little flash).
Verified: GAT562 (SSD1306) and WioTrackerL1Eink (GxEPD) solo builds compile clean.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pull repeated UI idioms into DisplayDriver and remove duplicated logic:
- DisplayDriver: add drawScrollArrows() and drawInvertedHeader(); replaces 11
copy-pasted scroll-arrow blocks across 5 screens and 3 inverted title-bar
blocks (NearbyScreen x2, NavView). Standardises the detail-view separator.
- useImperial(): single source on UITask; NearbyScreen/TrailScreen delegate
instead of each re-reading NodePrefs.units_imperial.
- NearbyScreen: extract saveSelectedWaypoint() (two identical blocks -> one);
drop the redundant local label buffer (WaypointStore truncates).
- UITask::shutdown(): power GPS off through LocationProvider::stop() instead of
poking PIN_GPS_EN directly — centralises enable/reset-pin + active-level logic.
Net -58 lines. Verified: GAT562 (SSD1306) and WioTrackerL1Eink (GxEPD) solo
builds compile clean.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Mirrors the Waypoint::readFrom() hardening — reject a truncated trail
snapshot instead of proceeding with garbage header fields. Consistency
with the waypoint store's persistence path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- UITask::shutdown(): power GPS off using !PIN_GPS_EN_ACTIVE instead of hardcoded
LOW, matching MicroNMEALocationProvider::stop() (still LOW on current active-high
devices, but correct for a future active-low GPS).
- buzzer _noteFreq(): clamp octave to 8 instead of 7 so the parser's accepted range
(4-8) is fully consumed; previously an octave-8 digit was clamped away and could
leak into the stream as the next note's duration.
- Waypoint::readFrom(): check read() return for version/reserved/count header bytes
so a truncated file is rejected instead of using garbage count.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NRF52 GPIO pins retain their last state in SYSTEMOFF. If GPS was active,
PIN_GPS_EN stays HIGH and the module keeps drawing ~20mA. gps_enabled is
already persisted to flash so applyGpsPrefs() restores the correct state
on next boot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Trigger is now stored as typed (e.g. "Ping" stays "Ping").
Case-insensitive matching is preserved by lowercasing both
the trigger and incoming message at comparison time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UITask.onBLEDisconnected() sets _next_refresh=0 so the BLE icon
updates instantly instead of waiting for the next polling cycle.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add build-solo-firmwares.yml: auto-detects all _solo_dual envs from platformio.ini, builds in parallel, publishes uf2 files to draft release
- Remove build-wio-tracker-l1-firmwares.yml (replaced by solo workflow)
- Add WioTrackerL1_companion_solo_dual and WioTrackerL1Eink_companion_solo_dual envs
- Wire build-solo-firmwares command in build.sh using _solo_dual suffix
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two independent, default-off toggles under Settings › Radio.
Pwr save: hardware RX duty-cycle (SX126x SetRxDutyCycle via
startReceiveDutyCycleAuto). The chip cycles RX↔sleep and wakes on a preamble —
no MCU state machine; recvRaw reads the packet exactly as in continuous RX.
Falls back to continuous RX on non-SX126x. (Replaces an earlier software-CAD
state machine that fought the hardware: polling a warm-sleeping chip gave a
phantom-busy channel that stalled TX ~4 s and dropped ACKs in the scan gaps.)
Auto pwr: Adaptive Power Control. tx_power_dbm becomes a ceiling; actual TX
power tracks the reverse-link SNR margin (measured above the per-SF demod floor,
EWMA-smoothed, proportional step with a deadband). Feedback comes from direct /
room-server ACKs and, for channels (no ACK), from hearing a repeater rebroadcast
our own flood; a lost confirmation ramps power back up so channel sends can't get
stranded below what the repeaters can hear.
Prefs schema 0xC0DE0009 (rx_powersave, tx_apc). Radio page / name bar show the
live TX power; noise floor reads n/a while duty-cycling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restore commented-out EXTERNAL_FLASH_DEVICES/USE_QSPI for reference;
board has no QSPI flash chip — defines were RAK4631 leftovers causing
framework to lock P0.28/P0.30 (joystick UP/LEFT) as QSPI outputs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Board has no QSPI flash chip — EXTERNAL_FLASH_DEVICES/USE_QSPI were
copied from RAK4631. The framework was initialising the QSPI peripheral
on startup, locking P0.28/P0.30 (joystick UP/LEFT) as outputs. Removing
these defines prevents QSPI init entirely.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
QSPI IO0=P0.30 and IO2=P0.28 are wired to joystick LEFT and UP on this
board. QSPI init configures those pins as OUTPUT, blocking button reads.
Disable QSPIFLASH so the joystick works; firmware falls back to internal
flash storage.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Contacts with lastmod=0 or lastmod>now (RTC not synced after reboot but
contacts have timestamps from a prior session) were sorted to the top
because their raw lastmod > 0. Now both cases are normalised to 0 before
the comparison, so unknown-time entries always appear at the bottom.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- TIME mode: call refresh() every 3 s so newly-heard contacts bubble up
to the correct position; previously the list froze at the order captured
when the filter was selected.
- All filters: right-align the distance/age value within the right column
(width - textWidth - 2 px) instead of pinning it to a fixed left edge,
so short strings like "5s" or "3m" sit flush with the longer ones.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Trail.h gpxWaypoints/gpxPoint: snprintf truncation clamp was `> sizeof`
(writing the NUL terminator into the XML stream); corrected to
`>= sizeof - 1` at all 3 sites (<wpt>, <time>, <trkpt>).
- UITask.cpp battMvToPercent: raise 100% ceiling from 4200 → 4170 mV —
the board never charges to 4200, so the indicator was stuck at ~97%.
- Trail.h header comment: corrected RAM cost from "256×12 B=3 KB" to
actual CAPACITY(512)×16 B=8 KB.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NearbyScreen:
- Hold Enter on a list row now shows Navigate and Save waypoint directly,
without entering the detail view first
- TIME added as the last filter slot (LEFT/RIGHT cycles Fav→ALL→…→Snsr→TIME);
time-sort shows age in right column and sorts by last-heard descending
- Save waypoint also available from detail view Options menu
UITask:
- Extract addWaypoint() helper (two overloads: with/without explicit timestamp)
consolidating the full()+add()+saveWaypoints()+alert pattern; TrailScreen
and QuickMsgScreen updated to use it
Fixes:
- SoundNotifier.h: correct NodePrefs.h include path (../NodePrefs.h)
- kbAddSensorPlaceholders: dereference _kb pointer in SettingsScreen,
QuickMsgScreen and BotScreen (signature changed to KeyboardWidget&)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Single-file Web Serial app for GitHub Pages. Connects to the device
over USB CDC, auto-detects <?xml…</gpx> frame from the Export GPX
action, and offers the file as a browser download with an editable
filename (defaults to trail_YYYY-MM-DD.gpx). Resets automatically
after download so back-to-back exports work without reconnecting.
Requires Chrome/Edge (Web Serial API). Enable GitHub Pages from the
repo settings pointing at the branch root or docs/ as needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Deduplicate the snprintf+showAlert pattern used in three mark-as-read
sites into a single private method.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MODE_SELECT already showed the count; CONTACT_PICK ("Mark as read") and
CHANNEL_PICK ("Mark all read") were silently clearing unread without
any feedback. Count is read before zeroing so the alert is accurate.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move all buzzer/melody dispatch (DM, channel, advert) into a new
SoundNotifier class in SoundNotifier.h, isolating fork-specific sound
code so upstream changes to notify() no longer cause merge conflicts.
The shared playSlot() helper also removes the custom_played
duplication that existed across the three cases.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The enum value and its case label were never emitted after PR #16 —
both dispatch sites in MyMesh.cpp now use advertReceivedFlood or
advertReceivedZeroHop exclusively.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Moves KeyboardWidget from a per-screen value member to a single instance
owned by UITask, passed to SettingsScreen, QuickMsgScreen, and BotScreen
as a pointer. Only one screen is ever active at a time, so the shared
state is safe. Saves ~1.5 KB of always-resident heap.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reverts onDiscoveredContact to the upstream 4-param signature, adding a
separate virtual onDiscoveredAdvert(bool was_flood) with a default no-op
implementation. Only MyMesh overrides the new virtual; simple_secure_chat
and any future implementors need no changes on upstream merges.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After PR #16 added None (slot=3) to melody options, only notif_melody_ad
had a bounds check. Add matching clamps for dm and ch to prevent stray
bytes from an older prefs file triggering buildMelodyFromPrefs with an
out-of-range slot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
