Three interaction inconsistencies found while auditing the favourites work,
all of the same shape: the same gesture meaning different things depending
on which screen you were on.
Value rows in popup menus. Rows like "Notif: ON" or "Sort: Dist" show a
value the user steps through with LEFT/RIGHT, but Enter treated them as
ordinary menu picks and closed the popup, so changing two of them meant
reopening the menu in between. Trail's settings submenu was the lone
exception, working around it by rebuilding and re-selecting after each
Enter. PopupMenu now knows the difference: addValueItem() marks a row, and
Enter on it returns the new VALUE_NEXT instead of SELECTED, leaving the
menu open. Only Back closes a menu now. Applied to the Messages
contact/room/channel menus, Nodes, the Ringtone editor and Trail, which
drops its reopenSettingsAt() workaround. The LEFT/RIGHT cycling bodies
moved into one helper per menu, since Enter and RIGHT now share them.
Nodes' Fav row was the worst case: LEFT/RIGHT did nothing there at all, so
the only way to toggle a favourite was an Enter that dismissed the menu on
every flip. Its label moved to a member buffer (as the Pin row already had)
so it can be retitled in place.
Settings rows Auto-off, Low battery, GPS pwr and Battery ignored Enter,
though their options wrap exactly like the melody/keyboard/clock rows
beside them, where Enter has always stepped forward. They accept it now.
Rows that ramp between fixed ends (Brightness, Volume, TX Pwr, Timezone,
SF/BW/CR) stay LEFT/RIGHT-only -- there is nothing to wrap to.
Hold Enter no longer doubles as Back. It quietly meant "go back" on Tools,
Locator, Live Share, Repeater, Bot, Auto-Advert, GPIO, Compass, the
Dashboard config and the Messages navigate view, while elsewhere the same
long press opens a context menu. It now only ever opens a menu, or does
nothing where there is none. Same for dismissing an open popup, which it
used to do. Checked that this strands nobody: every board that can reach
these screens has a real Back key (back_btn on joystick boards, Esc on
CardKB/TCA8418/T-Deck). Single-button boards produce no KEY_ENTER at all,
so they never leave the home pages in the first place.
- RepeaterScreen: drop the redundant "Rpt " prefix on the profile fields
(Preset/Freq/SF/BW/CR), matching Settings > Radio's own terminology --
the screen is already dedicated to the repeater's own profile, so the
prefix disambiguated nothing.
- Channel context menu: "Fav: yes/no" -> "Fav: ON/OFF", matching every
other toggle in the app.
- Settings (System tab): six labels left as raw concatenated identifiers
(AutoOff/AutoLock/TimeZone/LowBat/BattDisp/BzrVol) now read like their
space-separated neighbours (Auto pwr/Pwr save/DM sound/GPS pwr), and
BzrVol no longer clashes with "Buzzer" one row above it for the same
feature. Three value-label arrays also had one mismatched-case entry
fixed to match its siblings: Auto-off's "never" -> "OFF", Batt display's
"icon" -> "Icon", Sound's "built-in" -> "Built-in".
- ToolsScreen: re-enabled the mini-icons next to each tool, which had
been commented out ("don't fit visually"). Root cause: the screen's own
drawIcon() centred against lineStep() (line height + inter-row gap)
instead of getLineHeight() alone, 2px too generous for a near-full-
height icon -- now delegates to the already-correct miniIconDraw() used
elsewhere (e.g. the message-list ack checkmark). Also gave Admin and
GPIO their own icons (padlock, 3-pin header) instead of both sharing
System's cog.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The bot outgrew "auto-reply" once it gained Actions (!buzz/!gps/!advert/
!gpio1-4) that control device hardware remotely, not just answer messages.
Renames the Tools screen entry and all doc cross-references; already-shipped
release notes (v1.23) are left as-is to match what actually shipped under
that name.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Turn Nearby Nodes into the single node hub and make its navigation legible.
Node management (no phone app needed):
- MyMesh gains addDiscoveredContact() and deleteContactByKey(); CMD_REMOVE_CONTACT
now reuses deleteContactByKey() (one delete path: contact + blob + room password
+ UI cleanup + lazy write).
- Action menu (Hold Enter) gains Add contact (a new scanned node), Favourite /
Unfavourite (pin to the first free dial slot), and Delete contact (confirm first,
defaults to Cancel). Actions are offered contextually per row.
- A pinned contact shows a star in the list row, next to any live-share diamond.
Absorb passively-heard adverts: refreshStored() folds getRecentlyHeard() nodes that
aren't already listed as name+age rows (All filter only — AdvertPath has no type),
so "recently heard" no longer needs its own page.
Legible filter navigation: the filter (LEFT/RIGHT) is now a visible tab strip — the
active filter is a centred inverted pill, neighbours fan out and wrap around
(circular, first<->last). Only whole tabs are drawn so labels never wrap a line.
Rename Tools > "Nearby Nodes" to "Nodes".
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Surfaces the Alarm/Timer/Stopwatch screen (previously reachable only
from the home Clock page) as a System tool, via the existing
UITask::gotoClockTools() and ICON_ALARM.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every drawList/AccordionList row opened with the same hand-written
display.drawSelectionRow(0, y-1, width-reserve, lineStep-1, sel) line —
14 copies of the same geometry and magic offsets. Add a drawRowSelection(d,
y, sel, reserve) helper in icons.h next to drawList and route the canonical
sites through it (Bot/LiveShare/Locator/Repeater/Settings/Tools/Nearby/
QuickMsg/Waypoints).
Rows that intentionally differ (full-width DashboardConfig/QuickMsg, the
keyboard/ringtone grids) keep their explicit drawSelectionRow() call — the
helper is opt-in rather than baked into drawList, so legitimate variants
aren't forced into one geometry. Framework doc updated to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the ad-hoc enter()/markClean() entry methods (which lived outside
the UIScreen interface and were invoked via casts from each gotoX) with a
virtual onShow() lifecycle hook called centrally by setCurrScreen().
This removes the "forgot to call enter() in a new navigator" footgun and
the unchecked cast smell: 12 navigators collapse to one-line
setCurrScreen(x) calls, and override enforces signature match. Two entries
that carry a parameter/variant keep an explicit typed call after
setCurrScreen(): RingtoneEditor::selectSlot(slot) and TrailScreen::showMapView().
Behaviour-preserving: only screens that previously had enter() get an
onShow() override; Splash/Home/QuickMsg/Diag keep no reset as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Shows packet counts by category (RX/TX), radio noise floor/RSSI/SNR,
packet-pool free count and outbound queue length, uptime, and heap/stack
headroom on a single scrollable screen.
Adds generic per-payload-type RX/TX counters to Dispatcher (mesh layer),
plus pool-free/queue-length getters, and a new DeviceDiag helper for
nRF52 heap (linker-symbol + sbrk) and stack (FreeRTOS high-water-mark)
stats — the only platform needed for the 3 in-scope boards (Wio Tracker
L1 OLED/Eink, GAT562 30S), all nRF52840.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Trail map dots/diamonds/cross/start markers and the north indicator were
drawn as raw unscaled pixels, so they shrank to near-invisible specks on
landscape e-ink's larger font scale; they now route through the mini-icon
framework (icons.h) like the rest of the UI, and the grid intersection dots
scale with it too. The keyboard's preview/grid separator had the same bug
(hardcoded 1px) and now uses display.sepH().
Also makes UP/DOWN (and the keyboard's LEFT/RIGHT/UP/DOWN) wrap top<->bottom
across every list, menu and form selector, matching the behavior PopupMenu
already had.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- drawList(): scrollable list skeleton (visible window, keep-sel-in-view,
scroll-column reserve, per-row callback, indicator). Migrate Tools, Bot,
Nearby, Waypoints list and the three QuickMsg lists onto it; centralises the
scroll-clamp/reserve/indicator that each had open-coded (and inconsistently).
- drawCenteredHeader(): centred title + separator, replacing the duplicated
two-liner across ~10 screens (incl. QuickMsg, which used width()/2 spacing and
was missed before); unifies the separator at headerH()-sepH().
- keyIsPrev()/keyIsNext() in UIScreen.h for the LEFT||PREV / RIGHT||NEXT idiom;
applied to 6 screens, behaviour-preserving. Cancel/context-menu stay
per-screen (they mean different things on different screens).
- rotLabel() dedups the 0/90/180/270 array in Settings.
- Unify selection-row height to lineStep()-1 (Tools/Bot matched the rest).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the text ^/v scroll arrows with a font-scaling indicator drawn in
icons.h: a proportional thumb between fixed up/down triangle mini-icon caps.
drawScrollIndicator() lives in a ~5px right-edge column and scales via
miniIconScale (1x OLED, 2x landscape e-ink).
- Mini-icons: ICON_SCROLL_UP/DOWN; miniIconDrawTop (exact placement) and
miniIconDrawHalo (shape-hugging 1px DARK halo, clip_top to spare the header
separator) so caps stay visible on the LIGHT selection bar without a box.
- Thumb is 3*s wide so it centres on the triangle column; caps are static end
markers (always drawn) so neither vanishes at the extremes.
- scrollIndicatorReserve(): right-edge gutter (0 when the list fits). Content,
the selection bar and the message-history bubbles are all narrowed by it so
nothing renders under the scrollbar. Portrait e-ink wrap width subtracts the
reserve in both the box-height pass and render so wrapped text can't spill.
- Drop the redundant ">" selection marker (the highlight bar already shows
selection) and shift rows to x=2, reclaiming left-edge space.
- Wire the indicator into every scrollable list (Bot, Settings, Nearby, Tools,
Trail, QuickMsg lists + DM/channel history) and add one to WaypointsView,
which scrolled with no indicator before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pull repeated UI idioms into DisplayDriver and remove duplicated logic:
- DisplayDriver: add drawScrollArrows() and drawInvertedHeader(); replaces 11
copy-pasted scroll-arrow blocks across 5 screens and 3 inverted title-bar
blocks (NearbyScreen x2, NavView). Standardises the detail-view separator.
- useImperial(): single source on UITask; NearbyScreen/TrailScreen delegate
instead of each re-reading NodePrefs.units_imperial.
- NearbyScreen: extract saveSelectedWaypoint() (two identical blocks -> one);
drop the redundant local label buffer (WaypointStore truncates).
- UITask::shutdown(): power GPS off through LocationProvider::stop() instead of
poking PIN_GPS_EN directly — centralises enable/reset-pin + active-level logic.
Net -58 lines. Verified: GAT562 (SSD1306) and WioTrackerL1Eink (GxEPD) solo
builds compile clean.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The Tools menu rendered all items from listStart() with no scroll, so the
6th entry (Compass) fell off the bottom on the OLED's short panel and was
unreachable. Add a scroll offset that keeps the selection in view, with
the usual ^/v indicators.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools › Compass shows the device's course over ground (from the GPS COG
ring — no magnetometer) as a rotating arrow in a ring with a north tick,
plus a large degrees + cardinal readout. "No GPS fix" without a fix;
"move to set heading" when stationary (course undefined). Reuses
UITask::currentCourse, so it works without recording a trail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds Tools › Breadcrumb. Enter on the screen toggles tracking; while
active, UITask::loop samples GPS at the cadence chosen in settings
(default 1 min) and drops the point into a 256-entry RAM ring guarded
by a min-distance gate (default 25 m). A "G" indicator joins "A" in
the status bar with the same blink convention.
New storage:
- examples/companion_radio/Breadcrumb.h — BreadcrumbStore class
- 256 × 12 B = 3 KB RAM (survives auto-off, lost on reboot — explicit
flash-slot save comes in phase 4)
- Haversine min-delta gate, total distance, elapsed seconds, current
km/h, bounding-box helper
New screen:
- examples/companion_radio/ui-new/BreadcrumbScreen.h — Summary view
with Status, Points, Dist (m or km), Time (h:mm), Speed; Enter
toggles tracking, Esc returns to Tools
Schema bump 0xC0DE0002 → 0xC0DE0003 for two new NodePrefs bytes:
breadcrumb_interval_idx (1min default) and breadcrumb_min_delta_idx
(25m default). Older saves leave both at zero, which matches the new
defaults. DataStore::loadPrefsInt/savePrefs read/write the pair.
Logging on/off is a runtime flag inside BreadcrumbStore — not a
preference — so reboot returns to the off state cleanly; the user
will be able to persist a snapshot to a slot in phase 4.
Phase 2 (map view), 3 (point list), 4 (slot save/load, GPX export over
USB), and 5 (settings UI) follow incrementally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Eight screens repeated the same if/else block to invert the row
background for selected items. Add DisplayDriver::drawSelectionRow that
sets LIGHT, optionally fills the rect, and leaves the colour as DARK
when sel (so the caller's text renders inverted). 61 lines removed
across SettingsScreen, KeyboardWidget (cells + special row), ToolsScreen,
DashboardConfigScreen, BotScreen, RingtoneEditorScreen (note slots +
menu), NearbyScreen, QuickMsgScreen (4 list views).
Card-style rows (QuickMsg hist, NearbyScreen discover, RingtoneEditor
notes display) keep their original drawRect/partial-fill outline for
unselected — they don't match the simple-invert pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add NearbyScreen: GPS contact list with haversine distance sort,
type filter (ALL/Chat/Rpt/Room/Snsr), detail view with ping (RTT via
ACK poll), node scan via advert(), context menu
- Add DashboardConfigScreen: configure up to 3 data fields on the clock
page (Battery, Temp, Humidity, Pressure, GPS, Altitude, Lux, CO2,
Contacts); entered via long-press ENTER on clock page
- Rework HP_CLOCK layout: full-screen clock (size 2 at y=0), date at
y=19, separator at y=28, three data field rows at y=31/41/51;
hide node name/battery indicator on clock page
- Persist dashboard_fields[3] in NodePrefs and DataStore
- Add isAckPending() to MyMesh for NearbyScreen ping detection
- Wire NearbyScreen into ToolsScreen and UITask
- Reduce NearbyScreen entry buffer from MAX_CONTACTS(100) to 32,
saving ~3.3 KB RAM
- Switch haversine/bearing math from double to float (sinf/cosf/atan2f),
eliminating double libm and saving ~5-10 KB flash
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move three custom screens out of UITask.cpp into their own .h files
(RingtoneEditorScreen.h, BotScreen.h, ToolsScreen.h) and replace them
with three #include lines. UITask.cpp now only contains screens that
overlap with upstream (SplashScreen, SettingsScreen, QuickMsgScreen,
HomeScreen), making future upstream merges easier — custom screens live
in files that upstream will never touch.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Jakub
MarekZegare4andClaude Opus 4.8