Continuing the consistency review: sweep for the same three defect shapes
elsewhere in ui-new/ (own read pass plus two parallel research agents),
verified against source before acting.
Three destructive actions fired on a single Enter with no way back, unlike
contact-delete's existing confirm-defaulted-to-Cancel popup: Trail's "Reset
trail" (wipes the whole recorded route, no undo short of a prior manual
Save -- reuses Trail's own multi-level menu machinery, alongside its
GPS-off confirm), Messages' channel Delete, and RadioPresetPicker's saved-
preset delete (shared by Settings > Radio and Tools > Repeater, so one fix
covers both). All three now confirm the same way, defaulting to Cancel.
KeyboardWidget was the one place Hold-Enter still doubled as Cancel: Shift,
Backspace and a Latin letter's accent popup already have real, kept
meanings under a hold, but every other special-row cell (Space, OK/Done,
the {} placeholder) fell through to a bare CANCELLED, closing the keyboard
exactly like the real Cancel key. Now a no-op there too, matching the "only
Back closes it" rule already applied to popups and screens.
MessagesScreen defined the same two label arrays (Notif states, melody
slots) four times over, once per context-menu handler. Hoisted to one
pair of static class members -- constexpr wasn't enough to get the linker
to emit them on this toolchain, so they follow the same declare-in-class/
define-out-of-class shape NearbyScreen::FILTER_LABELS already uses.
Alert text: "Advert sent!"/"Advert failed.." and "Sent!" were the only
toasts anywhere with trailing punctuation; normalized to the plain style
every other confirmation uses. Unpinning from the Favourites Dial reported
the freed slot number from the Messages screens but not from Nodes or the
dial's own tile menu; now consistent everywhere pinning already was.
DiagnosticsScreen's Live/System/Font tab renderers hand-rolled the same
scroll-clamp/loop/indicator skeleton drawList() already bundles; switched
both to drawList (passing the screen's own _scroll as its `sel` too, since
neither tab has a row cursor -- makes drawList's internal clamp a no-op and
leaves clampScroll() as the only thing bounding it, unchanged). Pure
internal tidy, no behavior change.
Continuing the consistency pass: the four screens that show the
distance/bearing "navigate to a point" view (Nodes, Waypoints, Trail's
Track back, and navigating to a location shared in a message) had drifted
apart in three ways.
Only two of the four passed an EtaTracker to navview::draw(), so only
Nodes and Track back showed the closing-speed/ETA line -- navigating to a
waypoint or a shared location left it off for no reason. All four get one
now. They also left the view on three different key sets (Back alone,
Back+LEFT/RIGHT, Back+Enter); Back is now the only way out of any of them,
so a stray sideways nudge can't drop you out of a running track-back.
Messages' renderNav() also switched from reading node_prefs directly to
the shared useImperial() helper the other three already used.
Set as target -- the row Nodes and Waypoints both offer for a coordinate
-- was missing from the message-location Options menu; added alongside
Navigate and Save waypoint.
Nodes' own Set as target required a full 32-byte public key, which a
name-only live-track entry (someone sharing position on a channel who
isn't a saved contact -- the group-outing case this exists for) never
has. One flag was doing two jobs: "can be pinged" (needs the full key)
and "can be identified" (needs only the 6-byte prefix a person target
actually uses). Split into has_key/has_prefix; Set as target now only
needs a position, resolving to a person target (follows them) when a
prefix is available and a place target (pinned where they were) when it
isn't -- the same distinction Locator's own picker already draws.
Locator's target picker separately still listed the people pinned to the
Favourites Dial as its privileged top tier, which stopped making sense
once pinning and favouriting became separate concepts. It now leads with
favourites instead, matching every other list in the firmware.
Three interaction inconsistencies found while auditing the favourites work,
all of the same shape: the same gesture meaning different things depending
on which screen you were on.
Value rows in popup menus. Rows like "Notif: ON" or "Sort: Dist" show a
value the user steps through with LEFT/RIGHT, but Enter treated them as
ordinary menu picks and closed the popup, so changing two of them meant
reopening the menu in between. Trail's settings submenu was the lone
exception, working around it by rebuilding and re-selecting after each
Enter. PopupMenu now knows the difference: addValueItem() marks a row, and
Enter on it returns the new VALUE_NEXT instead of SELECTED, leaving the
menu open. Only Back closes a menu now. Applied to the Messages
contact/room/channel menus, Nodes, the Ringtone editor and Trail, which
drops its reopenSettingsAt() workaround. The LEFT/RIGHT cycling bodies
moved into one helper per menu, since Enter and RIGHT now share them.
Nodes' Fav row was the worst case: LEFT/RIGHT did nothing there at all, so
the only way to toggle a favourite was an Enter that dismissed the menu on
every flip. Its label moved to a member buffer (as the Pin row already had)
so it can be retitled in place.
Settings rows Auto-off, Low battery, GPS pwr and Battery ignored Enter,
though their options wrap exactly like the melody/keyboard/clock rows
beside them, where Enter has always stepped forward. They accept it now.
Rows that ramp between fixed ends (Brightness, Volume, TX Pwr, Timezone,
SF/BW/CR) stay LEFT/RIGHT-only -- there is nothing to wrap to.
Hold Enter no longer doubles as Back. It quietly meant "go back" on Tools,
Locator, Live Share, Repeater, Bot, Auto-Advert, GPIO, Compass, the
Dashboard config and the Messages navigate view, while elsewhere the same
long press opens a context menu. It now only ever opens a menu, or does
nothing where there is none. Same for dismissing an open popup, which it
used to do. Checked that this strands nobody: every board that can reach
these screens has a real Back key (back_btn on joystick boards, Esc on
CardKB/TCA8418/T-Deck). Single-button boards produce no KEY_ENTER at all,
so they never leave the home pages in the first place.
Three names had grown around one idea. "Favourite" was a filter in
Settings, an invisible app-only flag on a contact, a device-settable bit on
a channel, and — on the Nodes screen — a menu row that actually pinned to
the Favourites dial. Nothing marked a favourite on screen, and the dial
only took chat contacts.
A favourite is now the starred flag (ContactInfo::flags bit 0 for contacts
and rooms, ch_fav_bitmask for channels), settable on the device everywhere
via a Fav: ON/OFF row, marked with a star on its row, and sorted to the top
of the list — in Messages, Tools > Nodes and the Locator target picker.
Settings > Contacts > "Favs top" turns the sorting off; it defaults on, and
is stored inverted so an upgraded prefs file reads back as on rather than
off.
MyMesh::setContactFavourite() writes the same bit the app sets and bumps
lastmod, so the two stay in sync. The DMs/Rooms = Fav list filters no
longer depend on having starred someone in the app first.
Pinning is now separate and explicit, and the dial takes contacts, room
servers and channels. Slots carry a kind (NodePrefs::favourite_kinds,
schema 0xC0DE0029) — a channel slot holds an index, so emptiness is decided
by the kind first, since channel 0's payload is all zeroes. Choosing what
to pin reuses the Messages screen's own Direct/Channels/Rooms browse
instead of a second picker built on the dial, which drops that picker, its
key/label tables and the now-unused getRecentDMContacts(). A filled tile
gained Unpin/Replace under Hold Enter.
Fixes a room server being pinnable and then unremovable: the picker's
recent-conversations tier didn't filter by contact type and room posts
share the DM history, opening one from the dial skipped the login
handshake, and Unpin only existed in the chat contact list that rooms never
appear in.
Also: PopupMenu::_visible was written and never read (render recomputes the
cap from display height), which is why menus with more items than the
"visible" argument always worked; Settings' all/fav values and the
dm_show_all comment said things that were not true.
Built for Heltec V3, Wio Tracker L1, Wio Tracker L1 e-ink and T-Echo Card.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- RepeaterScreen: drop the redundant "Rpt " prefix on the profile fields
(Preset/Freq/SF/BW/CR), matching Settings > Radio's own terminology --
the screen is already dedicated to the repeater's own profile, so the
prefix disambiguated nothing.
- Channel context menu: "Fav: yes/no" -> "Fav: ON/OFF", matching every
other toggle in the app.
- Settings (System tab): six labels left as raw concatenated identifiers
(AutoOff/AutoLock/TimeZone/LowBat/BattDisp/BzrVol) now read like their
space-separated neighbours (Auto pwr/Pwr save/DM sound/GPS pwr), and
BzrVol no longer clashes with "Buzzer" one row above it for the same
feature. Three value-label arrays also had one mismatched-case entry
fixed to match its siblings: Auto-off's "never" -> "OFF", Batt display's
"icon" -> "Icon", Sound's "built-in" -> "Built-in".
- ToolsScreen: re-enabled the mini-icons next to each tool, which had
been commented out ("don't fit visually"). Root cause: the screen's own
drawIcon() centred against lineStep() (line height + inter-row gap)
instead of getLineHeight() alone, 2px too generous for a near-full-
height icon -- now delegates to the already-correct miniIconDraw() used
elsewhere (e.g. the message-list ack checkmark). Also gave Admin and
GPIO their own icons (padlock, 3-pin header) instead of both sharing
System's cog.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extends the existing single-boolean channel relay-echo marker into a
full count + list of distinct confirming repeaters, since each
repeater retransmit already appends its own identity hash to the
packet's path and the echo-matching hash deliberately ignores that
mutable path -- so every distinct repeater's echo of one send now
matches the same tracking slot instead of only the first.
Symmetrically captures the hop path a received DM/channel message
actually took, so a new "Path"/"Relayed by" row in the existing
Hold-Enter Options popup can show the resolved sequence of repeaters
(by contact name, or a hex fallback for an unknown one).
Also fixes a real bug caught during testing: the popup row's own
label ("Path (N hops)"/"Relayed by (N)") was built into a stack-local
buffer handed to PopupMenu, which only stores the pointer -- it
rendered as garbage once the building function returned. Moved to a
persistent member buffer.
Bumps the dev-build fallback version and adds release notes/docs
for this plus the two other 1.27 features already on this branch
(BLE retry backoff, marquee-scroll for selected long text).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Full documentation audit before merging 1.26 into main turned up:
- README's Supported Devices table was missing GAT562 Mesh Watch13
(a CI-built, shipping firmware with zero end-user docs -- pre-existing
gap, not introduced by this branch) and ProMicro (added to the build
table by an earlier commit but never to the device list up top).
Building-from-source's env table was also missing Watch13.
- settings_screen.md's Keyboard table never documented the Ext. KB
(Full/Compact) setting, despite external_keyboard.md already
describing it in detail.
- nrf52_power_management.md's board-support table only listed 5 of the
13 boards that actually have a PowerMgtConfig implementation wired up
(grep-verified against every variants/*/*.cpp defining `power_config`)
-- added the other 8, and fixed one board's listed name (RAK 3401,
not "RAK WisMesh Tag") to match its actual getManufacturerName().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
start ota was already sendable via Admin's Custom-command row (and
CLI-reachable directly), but had no dedicated menu entry. Adds a row to
the Actions tab that confirms first (Start/Cancel, defaulting to
Cancel) before sending -- unlike Reboot, OTA parks the remote in BLE
DFU mode for the duration of the update, disruptive enough to warrant
the extra step.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- README's env table and external_keyboard.md's device-support table both
get a ProMicro row -- missed when the PR #31 merge landed since neither
was in scope for that commit.
- external_keyboard.md and build_flags.md now cover CARDKB_I2C alongside
ENV_PIN_SDA/ENV_PIN_SCL: the PR generalised CardKB bus selection to a
single macro after build_flags.md was first written, so the doc only had
the older (still valid, but no longer the only) form.
- release-notes.md: added the ProMicro solo build and the new Build Flags
reference page to v1.26's What's New.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed
in with the shared upstream board configs (repeater, room server, plain
companion) that every MeshCore fork carries. Split them out into their own
top-level solo/<board>/ folder -- each still `extends` the board base defined
in its original variants/<board>/platformio.ini, just no longer interleaved
with it file-wise.
- platformio.ini: extra_configs picks up solo/*/platformio.ini alongside
variants/*/platformio.ini.
- build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of
variants/ (the release matrix is unchanged -- same 8 envs, same names).
- pr-build-check.yml: solo/** added to the trigger paths.
- GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a
strict superset (BLE still works, plus USB), and every other board only
ever had one solo build to begin with.
- GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to
match. No comment anywhere recorded whether this board's USB data lines
are actually broken out to a connector -- DUAL_SERIAL compiles and works
over BLE regardless, so worst case the USB half goes unused.
- Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set
it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in
the old ui-tiny UITask, never ui-new, which every solo build (these
included) uses -- it did nothing on any of them. Left alone everywhere
else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or
the flag is legitimately read); out of scope here.
- Added docs/solo_features/build_flags.md: every optional -D flag a solo
build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/
vibration, GPS switch, display/battery tuning), verified against the code
rather than the existing per-board comments, with what's already baked
into every solo build kept separate from what's opt-in.
- README: doc index + Building from source section link to the new page;
path references to the moved solo files updated to solo/<board>/.
All 8 solo_dual envs rebuilt clean after the move; native test suite (40
cases) unaffected.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
No board in this repo has one built in, and no default pin is assumed
anywhere -- whoever wires a Hall-effect or reed sensor to a free GPIO sets
PIN_HALL_SENSOR (and HALL_ACTIVE_HIGH, for a sensor that pulls the pin high
rather than low on presence) as a build_flag on their own env. Entirely
opt-in and a no-op elsewhere, same pattern as PIN_GPIO1..4/ADC_MULTIPLIER/
CARDKB_ENABLE.
Level-triggered polling (like pollCardKB()) rather than an edge interrupt --
a magnet held near the sensor reads the same way every tick, so the new
pollHallSensor() only acts on the two transitions. Closing locks and blanks
the display with no wake grace (the cover is physically over the screen, so
there's nothing to show); opening unlocks and wakes it, with no key combo
either way. Both are independent of the Auto-lock setting, which is a
timeout, not a physical event.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
LEFT went to the newer message and RIGHT to the older one, which reads
backwards against the page metaphor the "<" / ">" markers set up. Swap it:
LEFT turns back to the older message, RIGHT forward to the newer one, and
the markers follow (they were keyed to the opposite flags).
PREV/NEXT are named in message order, not screen order -- MessagesScreen's
_hist_sel counts newest-first, so PREV is the older message -- so only the
key mapping and the two marker conditions change; the caller side is
untouched. Applies to both the DM and channel fullscreen views, which share
handleInput(). AdminScreen's reply view treats every non-NONE result as
"close", so it is unaffected.
Docs and release notes updated to match.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Settings > Radio > Scope: type a community/region name on-device (derives
the shared key the same "#name" -> SHA256 way as DEFAULT_FLOOD_SCOPE_NAME),
previously only settable from a connected app.
- Tools > Repeater > Scope only + Extra scopes: only relay flood traffic
matching the device's own scope or a comma-separated list of additional
scopes, without changing what scope the device's own messages send under.
No-op while unconfigured.
- getCADEnabled()/getInterferenceThreshold() were hardcoded off on
companion_radio; CAD now auto-enables whenever RX power-save (duty-cycle)
is active, since the noise floor isn't kept fresh during duty-cycle sleep.
- Message truncation to fit the send frame could split a multi-byte UTF-8
character in half; now stops at the last complete character.
- The default "Public" channel was unconditionally re-added at every boot
before the saved channel list was loaded, so deleting it never stuck.
Only seeded now on a genuinely fresh device (no channel file yet).
- Tools > Nodes read contacts from the wrong starting offset, landing on
internally-reserved bookkeeping slots instead of real contacts -- showed
as blank "Unknown" rows and silently dropped that many real contacts off
the end of the list.
- resetContacts() only cleared the first few reserved slots, not the whole
contact table, contrary to its own comment; only reachable today via
private-key import, fixed to match stated intent regardless.
- Keyboard's multi-line text preview could render the cursor on an empty
line below short typed text instead of right after it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Cut restated points, hedge phrases and over-explained asides throughout
-- same information, fewer words per sentence. Also fixed a stale gap
in README's "Building from source" env table (Cardputer ADV and
T-Echo Lite + KeyShield were missing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Swaps which physical input plays which role on the Heltec V3/V4 wired
joystick: the stick's own fifth "press" contact now drives Enter (your
thumb's already on the stick when you'd confirm something), and the
onboard PRG button -- previously Enter -- becomes Back instead, so it
no longer needs a separate wired button of its own.
Pure pin reassignment in the solo_dual envs, no UITask.cpp changes:
PIN_USER_BTN (Enter) is undef'd and redefined from the base env's PRG
default to the joystick's press pin, and PIN_BACK_BTN takes PRG's old
GPIO0. Scoped to just these two envs -- Wio Tracker L1/GAT562/MeshTiny
share the same UI_HAS_JOYSTICK code path with PRG already correctly
wired as their one true physical button, so their behaviour is
untouched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Follow-up to the UI casing unification -- the docs quoting these same
option values (Settings' Auto-lock/Buzzer/Full refresh/Low battery/GPS
pwr/Resend rows, Tools' Auto-pause/Mark avg/Auto-save/Auto-Advert/
Heartbeat/GPIO rows, and the clock alarm's Repeat cycle) still showed
the old lowercase/Title-case spellings the screens themselves no
longer use.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
README's Supported Devices table and Flashing section gain the
Cardputer ADV and T-Echo Lite + KeyShield rows/headings (both marked
experimental, matching release-notes.md and the Heltec V3/V4 entries).
external_keyboard.md gets a new section for their built-in TCA8418
keypads -- a separate mechanism from CardKB, not documented anywhere
before. settings_screen.md's GPS pwr row now lists !gps fix among the
things that hold GPS continuously on, matching the actual code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Settings screen doc gets the new "GPS pwr" row and a watchdog note on
"Pwr save"; Diagnostics doc gets the new "RXPS wd s/h" row and updates
what "Reset counters" actually clears; release-notes.md gets Unreleased
entries for all three additions from the prior commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
README had drifted from the firmware in several places:
- Supported Devices listed only the three nRF52 boards; Heltec V3/V4 were
missing entirely, as was any mention that ESP32-S3 flashes differently.
Flashing is now split per MCU, with the merged-vs-app-only .bin trap
spelled out — that one costs an afternoon to diagnose from a dark screen.
- It advertised a Lemon/Default font switch that was retired in v1.23; there
is one unified misc-fixed 6x9 font now and no font setting at all.
- tools/README claimed ENABLE_SCREENSHOT had to be added by hand, directly
contradicting README's "no special build flags required". The envs have
carried the flag for a while; rewrote the file to cover all four tools.
- "S key for screenshot" described screenshot.py's menu, not the device —
screenshots are driven entirely from the host via CMD_GET_SCREENSHOT.
Structurally, general notes (factory reset on migration, BLE-over-USB
priority) sat at the tail of the ESP32 subsection and read as ESP32-specific;
they're now placed where they apply. Heltec wiring moved out of Supported
Devices into its own section so the device table stays scannable, and the
Solo Tools heading is no longer a link (it was generating a garbage anchor).
New docs/solo_features/external_keyboard.md covers CardKB and the wired
joystick: shortcut table, Full vs Compact, and the pin assignment. The pins
are marked as verified on real V4 hardware only — V3 inherits them from
Heltec's documented pin-compatibility and hasn't been checked on a board.
FEATURES.md (roadmap + code audit, developer-only) moves to
docs/development/roadmap.md; nothing referenced it by path.
Adds Building from source / Releasing / Repository layout, since the release
flow was only discoverable by reading the workflow.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Bot Actions (!buzz/!gps/!advert/!gpio1-4) ran their side effect
immediately during botScanCommands(), before quiet-hours/cooldown/
per-contact throttle were checked -- those gates only suppressed the
reply text, not the actual buzz/GPS toggle/advert/pin write. botCommandReply()
now only records what was requested; applyPendingBotActions() runs the
deferred effects once a wrapper's throttle checks pass and the ack sent,
mirroring the existing _locfix_requested pattern. resetPendingBotActions()
clears everything on every throttled/aborted path.
- CardKB's Fn+<letter> accent-popup shortcut bypassed the locked-input gate
(it called into KeyboardWidget directly instead of through the
enqueueKey()/dequeue path every other key uses, so it wasn't discarded
while _locked). Now checks _locked itself.
- Since a locked device now correctly ignores CardKB entirely, Fn+Esc
(single press) is added as CardKB's own lock/unlock gesture -- otherwise
a CardKB-only setup had no way to unlock. Esc rather than the adjacent
Fn+Backspace, to avoid an accidental press.
- botScanCommands() now parses up to two arguments per command instead of
one. Used by "!gps fix [seconds]" to override the default 90s timeout
(clamped 15-300s) for a poor sky view where 90s isn't always enough to
reach isLocFixReady()'s HDOP/satellite bar.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Turns GPS on (if it wasn't already), waits for a stabilised fix
(isValid() + >=8 satellites, then averages 10s of readings), sends the
position, and restores GPS to whatever state it was in before -- up to
a 90s timeout, after which it reports a partial fix (if it got any
samples) or plain failure.
Replies in two parts since a fix takes seconds-to-minutes, unlike every
other bot command here: an immediate "acquiring fix..." ack (through
the existing synchronous command path), then the actual position as a
separate follow-up message once ready, delivered to whichever
destination (DM/room/channel) the request came from. Only one fix can
be in flight at a time -- a second request while one is pending gets an
immediate "already pending" instead of silently replacing it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The bot outgrew "auto-reply" once it gained Actions (!buzz/!gps/!advert/
!gpio1-4) that control device hardware remotely, not just answer messages.
Renames the Tools screen entry and all doc cross-references; already-shipped
release notes (v1.23) are left as-is to match what actually shipped under
that name.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
"+ Add channel" jumped straight into a generic Name+Secret form, so the
"hashtag channel" convention documented in docs/companion_protocol.md
(secret = first 16 bytes of sha256("#topic")) was only reachable by
already knowing to type a literal "#topic" into the passphrase field --
nothing in the UI surfaced it. The phone app instead shows an explicit
channel-type picker; this adds the same on-device.
"+ Add channel" now asks Public / Hashtag / Private first:
- Public commits immediately with the well-known default channel's name
and secret (8b3387e9c5cdea6ac9e5edbaa115cd72, confirmed to match
MyMesh.cpp's PUBLIC_GROUP_PSK and the docs' published key) -- useful
to restore it if deleted.
- Hashtag shows a single Topic field; Save synthesizes name="#topic" and
derives the secret via the existing SHA-256 passphrase path -- same
underlying mechanism Private already had, just discoverable without
knowing the "#" convention.
- Private is today's manual Name+Secret form, unchanged.
Editing an existing channel skips the picker (no ambiguity to resolve
there). Extracted hexToSecret() out of deriveSecret()'s hex-mode branch
so Public's fixed key parses through the same code instead of a second
hand-rolled loop. No other file needed changes -- openAdd()/openEdit()/
active()/render()/handleInput() keep their existing signatures.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Page 0 was hardcoded to Latin -- Cyrillic/Greek could only ever be the
second, cycled-to page. Settings > Keyboard's Alphabet row splits into
Main (which script the keyboard opens on by default) and Additional
(the second one reached via #@/abc), so a Cyrillic/Greek typist can make
their own script the default instead of always landing on Latin first.
Setting Additional equal to Main collapses back to a 2-page cycle (that
script + Symbols), same rule the old Latin-hardcoded design already used
implicitly.
KeyboardWidget.h: cellStr()/t9GroupStr() now dispatch through
scriptCellStr()/scriptT9GroupStr(), treating Latin as an ordinary peer of
Cyrillic/Greek instead of a special case; scriptHint() replaces
altAlphabetHint() so the #@/abc key's "next page" hint is correct
regardless of which script that lands on; the accent popup's gating
checks the current page's actual script instead of assuming page 0 is
always Latin. Removed the now-dead pageIsAltAlphabet().
NodePrefs gains keyboard_main_alphabet (schema sentinel 0xC0DE001F ->
0xC0DE0020, same append-at-tail/clamp-on-load pattern as every prior
schema growth this file uses). Verified via a real build that the new
field lands in existing tail padding -- sizeof(NodePrefs) is unchanged
at 2712.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the 8 separate Latin-diacritic alt-alphabet pages (Polish, Czech,
Slovak, German, French, Spanish, Portuguese, Nordic) with one popup: Hold
Enter on a Latin letter that has accented variants (a c d e i l n o r s
t u y z) opens a floating horizontal strip of that letter's accents,
anchored over its own row so the grid stays visible underneath (LEFT/
RIGHT picks, Enter inserts via a new shared insertGlyph() helper, Cancel
dismisses). Holding a letter with no variants is a no-op. Cyrillic/Greek
remain full alt-alphabet pages; NodePrefs::keyboard_alt_alphabet shrinks
from 11 to 3 values accordingly -- an old saved Polish..Nordic value just
clamps to Latin via DataStore.cpp's existing range check, no migration
code needed.
Freeing Hold-Enter on letter cells required moving cursor-mode's own
trigger: UP from the top letter row now enters it instead of wrapping to
the special row. To keep that wrap reachable, cursor mode's UP/DOWN
(Home/End) continue the wrap once already at that boundary -- UP again
lands on the special row, DOWN again back on the letter grid -- reusing
the same proportional column mapping the old direct wrap used.
Diagnostics' font-coverage sample swaps its 8 per-language lines for one
line sampling the new accent table. Docs (message_screen, settings_screen,
solo_ui_framework) and release-notes updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reordered BotScreen's carousel to Channel / Room / Direct / Other and
made Channel the default opening tab, per feedback that the screen
should start from the first tab shown. Docs updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
Logging in to a room server (first-time prompt or a remembered password) used
to leave the user on the room list, needing a second Enter to open the chat.
onRoomLoginResult() now opens the room history on success via a shared
openDmHistory() helper (extracted from the Enter-on-contact path).
The login result is async, so the auto-enter is gated on the user still being
on that room in the picker: phase CONTACT_PICK, room mode, no context menu /
share / pick-target sub-flow active, and the result pubkey matching the
selected contact. Otherwise it stays put (no yanking the user into a screen
they navigated away from).
Resolves the "auto-enter after login" code-review item. Builds green:
WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
T9 keys now read like a phone keypad — each cell is labelled <digit><group>
(e.g. 2abc), with the digit matching what the multi-tap cycle lands on after
the letters. No separator space: the widest group (".,!?'-") plus the digit
already fills a narrow 128px OLED cell at 3 columns.
Also fills in the v1.22 release notes (T9 keyboard, trail auto-save, Clock
Tools in Tools, Map/Shutdown reorderable, battery-read fix, the UI-audit fix
batch, discover-dedup, favourites self-heal, preset-name placeholder, OLED
frame-skip, e-ink full-refresh) and syncs the solo-feature docs: new Keyboard
settings section, Trail Auto-save row, and Clock Tools reachable from Tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a Clock Tools screen (Enter on the home Clock page) with three time
utilities, plus the engine that drives them from UITask::loop() so they
work regardless of the current screen / display state:
- Alarm: a single one-shot wake alarm. Persisted in NodePrefs as a local
time-of-day; UITask schedules it as an ABSOLUTE fire instant recomputed
from that time, so it survives RTC re-syncs (mesh/app/GPS/CLI all jump
the clock) — small corrections still fire on time, a jump over the
target still fires (late, up to 6 h). Disarms after firing. A bell
icon signals an armed alarm on the clock face and the top status bar.
- Timer: a millis-based countdown (sync-immune), big HH:MM:SS readout,
rings even when off-screen.
- Stopwatch: millis-based, keeps running in the background.
Numeric fields use the shared framework DigitEditor (digit-by-digit,
min/max enforced). The alarm/timer/ring engine lives in UITask alongside
the locator/live-share engines (no screen-cast for time-critical logic).
E-ink: live readouts refresh coarsely (and on any key); timing is exact
regardless, and the countdown's buzzer fires on time. Rings override mute
and are dismissed by any key (auto-stop after 1 min). Cannot wake from a
full Shutdown (CPU/RAM powered down).
NodePrefs: +alarm_on/alarm_hour/alarm_min (fit existing tail padding,
sizeof unchanged 2488), SCHEMA_SENTINEL 0xC0DE0016 -> 0xC0DE0017,
DataStore read/clamp/write in lockstep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add Tools › Trail → Hold Enter → Track back (shown when the trail has ≥2
points). It reuses NavView but, instead of a single fixed target, snaps onto
the route at the nearest recorded breadcrumb and walks the points in reverse,
auto-advancing the target as each is reached (within 20 m). The header shows
points remaining ("Back: 12 pt" → "Trail start"); reaching the start toasts
"Back at start" and exits. Cancel leaves at any time.
Lives in WaypointsView as a new sub-mode; advancement runs in poll()
(forwarded from TrailScreen) so it tracks GPS independently of the render
cadence. An EtaTracker drives the approach/ETA line and is reset on each
breadcrumb advance to avoid a bogus closing-speed spike.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a "Mark avg" trail setting (Off/5/10/30 s). When set, Tools › Trail ›
Mark here samples the GPS fix once a second for the chosen window and stores
the mean position instead of one instantaneous fix — a steadier, more
accurate mark for a precise spot. A progress screen shows time left + sample
count; Cancel aborts; the window then opens the label keyboard as usual.
Off (default) keeps marking instant.
Sampling runs in WaypointsView::poll() (forwarded from TrailScreen::poll())
so it ticks on the main loop, independent of the slow e-ink render cadence;
int64 accumulators avoid overflow over 30 samples.
Persisted as NodePrefs::gps_avg_idx (schema 0xC0DE0016): struct field +
option table, DataStore rd/write/clamp in lockstep. sizeof unchanged (the
uint8_t fits existing tail padding) so the 2488 tripwire still holds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
onContactOverwrite() (the contact-table-full LRU eviction path) deleted the
contact's blob and notified the companion app, but never called the new
onContactRemoved() cleanup -- so a Favourites Dial slot, Locator target, or
Live Share target could still go stale, just via the silent auto-evict path
instead of an explicit removal. This is likely the main real-world cause of
the "(gone)" tile the docs described, since auto-eviction happens far more
often than an explicit CMD_REMOVE_CONTACT.
Also sync the two docs that described the old (now wrong) behaviour:
Locator's "survives delete" claim, and Favourites Dial's "(gone) until
reassigned" claim.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Starting trail recording with GPS switched off used to call setActive(true)
immediately -- the session timer ran while the screen sat on "Waiting for
GPS fix" forever and recorded nothing, with no hint that GPS was the
problem. Choosing "Start tracking" now opens a "GPS is off" confirmation
(Enable GPS & start / Cancel); confirming enables GPS and starts the
session. Behaviour is unchanged when GPS is already on.
Gated on a new UITask::hasGPS() so the prompt only appears on boards that
expose a toggleable GPS, not where GPS is simply absent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a "Rooms — logging in" section and a room context-menu entry to the
Messages screen docs: auto password prompt, passwords remembered across
reboots, self-healing on failure, re-login via Login…, app-entered
passwords also saved, and the ASCII-only keyboard caveat.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the repeater filter knobs from "politeness" to "forwarding
filters" across code comments, FEATURES.md and the docs, and correct
references that hadn't followed the controls when they moved from
Settings › Radio to the dedicated Tools › Repeater screen.
Comment/doc accuracy fixes:
- NodePrefs: user_radio_presets are now written by both Settings and
Repeater (shared picker), not Settings only.
- DiagnosticsScreen: class header listed only some rows; spell out the
full set (forwarded, signal, pool/queue, error flags, reset gesture).
- RepeaterScreen header no longer claims to show live forwarding stats
(they live on Diagnostics).
- tools_screen.md: drop the stale paragraph claiming the Repeater screen
shows live stats at the bottom — it is config-only.
Comments/docs only; no behaviour change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace single-letter M/B/A/G top-bar indicators with scalable mini-icons:
ICON_MUTE (speaker+cross), ICON_BLUETOOTH (rune), ICON_ADVERT (broadcast
mast+waves), ICON_TRAIL (map pin). Centred in the cw+2 indicator box;
disconnected BT shows the plain glyph instead of lowercase b.
- fix(settings): right-side values used display.valCol() without the scrollbar
reserve, so after expanding a section they rendered under the indicator.
Route all value cursors through valCol(display) = display.valCol() - _reserve.
- fix(settings): font toggle used ^=1, which on a stale value of 2 (older Hybrid
build) flips 2<->3 — both nonzero, locking applyFont() on Lemon with no way
back. Normalise: use_lemon_font = use_lemon_font ? 0 : 1.
- docs(settings): document Messages > Resend setting.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reply-bot overhaul on top of the trigger/reply auto-reply:
Robustness
- single botTriggerMatches() shared by DM/channel paths; named constants
(BOT_REPLY_COOLDOWN_MS / BOT_SCRATCH) replace magic numbers.
- per-contact DM throttle (8-entry ring) so a second sender isn't starved
while one contact is on cooldown.
- channel anti-loop: skip only when an incoming message equals our own reply
(was: any reply containing the trigger word — which silently killed channel
replies for the common "trigger word in reply" setup).
Features
- away / reply-to-all: a lone "*" trigger matches every message.
- independent DM vs channel triggers (bot_trigger / bot_trigger_ch); "*" works
on the channel too, bounded by cooldown + echo guard.
- query commands: a DM or monitored-channel message is scanned for "!word"
tokens — !ping/!batt/!loc/!time/!temp/!hops/!status/!help — merged into one
combined reply. DM = per-contact throttle, ignores quiet hours; channel =
broadcast, per-channel cooldown, respects quiet hours. !hops uses
getPathHashCount() (0 = direct).
- quiet hours (bot_quiet_start/end, local, wraps midnight) silence push replies.
- reply counter shown in the BotScreen header.
UI / storage
- BotScreen: 9 rows, scrolling list (no more cramming), field I/O via
fieldBuf()/fieldCap().
- prefs bot_commands_enabled / bot_quiet_start / bot_quiet_end / bot_trigger_ch
persisted; schema 0xC0DE000A → 0xC0DE000C with clamping + migration
(bot_trigger_ch seeded from bot_trigger on upgrade).
- docs: tools_screen bot section rewritten; FEATURES.md refreshed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- tools_screen (Nearby): drop the removed "Filter…" Options action; filtering
is LEFT/RIGHT on the list only. Sort is adjusted in place via LEFT/RIGHT on
its row, stored-source only; filter/sort persist across re-entry.
- nearby_redesign / trail_redesign: mark Status implemented (branches merged);
record the Nearby deviations from the proposal.
- FEATURES: DM delivery status moved from idea to ✅ shipped, with deltas.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the many scrollable filter/sort categories and inconsistent popups
with a single list / detail / action-menu path over two sources (stored
contacts and live discover scan). Filter (type) and sort are independent
axes: LEFT/RIGHT cycle the type filter, the action menu's Sort row is
adjusted in-place with LEFT/RIGHT (not Enter). The active filter is shown
in the SCAN title and empty-list messages distinguish "no contacts" from
"filtered out". Filter/sort persist across re-entry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tidies the Trail screen end to end, with no functional change beyond the
intended UX cleanups. Squashed from refactor/trail-screen.
Popup:
- Two-level action menu (Hold Enter): short main menu (Start/Stop, Mark
here, Waypoints…, Trail file…, Settings…) plus "Trail file…" and
"Settings…" submenus, replacing one flat ~12-item list that mixed
settings and actions. One interaction pattern per level; Reset lives in
Trail file…, away from a stray Enter. Settings submenu is view-aware
(Grid only on Map, Readout only on Summary).
Map:
- MapProjection (geo→pixel) built once and shared by the map, grid and
marker drawing — removes the duplicated projection math and renderGrid's
11 scalar params.
- renderMap split into computeBounds() and drawMarkers() helpers.
Grid:
- Square cells fitted to the frame: the shorter side is divided into a
whole number of equal cells (grid touches that pair of borders), and the
longer side centres the whole cells that fit — square, symmetric, no
one-sided drift. Drawn as one dot per intersection (legible on OLED).
Waypoints:
- Extracted the whole waypoint management UI (list / navigate / add-by-
coords / mark / rename / delete / send) into a self-contained
WaypointsView component that TrailScreen owns and delegates to.
- Dropped the redundant bulk "Clear all" (per-waypoint Delete covers it).
Docs updated (tools_screen.md) + design rationale (docs/design/
trail_redesign.md). Builds clean on solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Jakub
MarekZegare4andClaude Sonnet 5