Settings > Privacy > Precision: Exact / ~100 m / ~500 m / ~1 km, beside
"Position in adverts", which stays the on/off. With the position shared,
it is snapped to a fixed grid (0.0009 / 0.0045 / 0.009 degrees) rather
than jittered, so repeated adverts from one spot send the same value and
can't be averaged back to the exact fix.
A schema row (NodePrefs::advert_loc_prec), so both UIs show it, factory
reset clears it and the console has it as advert.loc.precision.
Every self-advert -- manual, flood, auto, the phone app's and contact
export -- now goes through MyMesh::createOwnAdvert(), so the precision
applies everywhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings schema gains Privacy (position in adverts, who can ask for
status / location / sensors), Adding contacts (all or by type, max
hops, replace oldest) and Advanced radio (path hash size, double ACK,
listen before talk, interference threshold, RX boost, RX delay,
airtime factor); both UIs build their rows from it
- Auto-advert carries position only when Position in adverts is on
- ui-new accordion holds 16 sections and 128 rows
- docs: settings, tools, feature matrix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While the loop task is inside a display refresh (seconds on a big e-ink
panel) the CardKB isn't polled, and the keyboard's own one-key buffer
drops every press but the last.
A small FreeRTOS task polls the CardKB every 10 ms while a refresh is in
progress, into a 16-entry queue that the loop drains afterwards. A mutex
guards the shared Wire1 bus against querySensors(). The task is created
after the screens so its stack doesn't starve their allocations, and the
loop falls back to the old direct polling if it can't be created.
Tested on hardware: Wio Tracker L1 + CardKB, several quick presses during
an 800x480 refresh all arrive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxAZVAbhhYr18Dd4guTQM1
ui-new: Status › System, Enter shows it full screen. L2: Settings › About.
One precomputed 25 x 25 matrix (ui-core/SiteQr.h) for both, so no QR
library; the URL in upper case keeps it at version 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new's messagesInView() and ui-lvgl's threadInView() hold the
lit-and-unlocked test the viewing checks repeated; the keyboard's three
copies of the backspace call deleteBeforeCursor(). A stale comment on the
cursor-mode hint goes, onDisplayOn() sits after the view helpers it calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cursor marks the character it stands before instead of pushing the
text apart: underlined while typing, an inverted block while moving it.
The grid stays on screen with the special row turned into the key hints;
Up/Down move a word, Hold-Enter deletes before the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A conversation left open under the lock screen or a dark display no longer
counts as read: the counters and the lock screen's tally go up, and on
waking (L2: on unlocking) the conversation reopens on its first unread
under the "New" line, a typed draft kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hashtag channel names already start with '#'; the tiles added another
("##test"). chanctl::bareName() is now the one place that strips it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Contacts and paths are saved a while after the change and never while the
user is active, so a send no longer stutters on the 53 KB contact rewrite
(a path that came back unchanged isn't written at all). The clock is saved
every 30 minutes and restored no earlier than the firmware's build day.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A pending DM shows a dot per send, as on the L1. The thread is read from
the SD archive, which a resend never updated: it does now, and the
thread's signature and patch state count the attempt.
- Nearby redraws when a node goes live, changes type or the units change;
the scan popup when a name or the remote SNR arrives.
- The user LED is active high: it was lit all the time and went dark
while transmitting.
- Sim hooks "dm" and "send" for testing a DM thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display > Message alert: Normal keeps the sliding banner; Compact shows an
envelope with the unread count beside the battery (in the header line where
there's no status row), blinking for 2 s; Off shows nothing. The blink only
ever brings the next frame earlier, so it no longer holds back the UI's
animations while it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit is what the send leaves of MAX_TEXT_LEN: a channel post carries
"<node name>: ", a direct message resent more than three times keeps two
bytes spare, and placeholders count as they expand (msgtext::limit/sentLen).
Bytes, not characters. The path and packet header sit outside the payload;
static_asserts keep a full message within the radio frame on the longest path.
From 40 bytes left the count shows: on the L2 as a tag on the field's top
edge, on OLED/e-ink at the right of the preview's last line with the text
wrapped short of it. Input stops at the limit; a send still over (a
placeholder grew) is held. Sim hooks to open a compose with text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Our /prefs file can't be read from a folder of that name, and the rename
that commits each save can't replace one, so on a device moved over from
Meshtastic without erasing the flash no setting survived a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tab a screenful: the sky plot beside the fix; the bars with a fixed
dB-Hz scale and the constellations; and Details with whatever else the
receiver reports (correction, locator, course, DOPs with their rating,
signal averages, NMEA counts). Sim: sim_open("gps").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Chart.h draws Diagnostics > History, the noise sweep and the trail's height
profile: round values up the left, labels along the bottom, a solid fill
(no transparency) and, under a finger, the sample's value and when / where.
Sim: sim_open("histdemo") / ("profdemo") fill them with made-up data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home and the lock screen draw HH:MM in ui-core/Lettering.h's block digits,
the seconds smaller on the same baseline, leaning smoothly per screen row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACCENT_DIM (the accent mixed toward black) came out brown on selected
tabs, chips, segments and own bubbles. They take the accent with dark
text now, as primary actions and the quick panel tiles do:
styleSelected() sets the fill, the pressed shade and every label under
it. Own bubbles: dark text, age and delivery mark (green or red can't be
read on amber); the melody editor's selected note is outlined, the
sounding one filled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Quick panel: the screen under it is frozen and dimmed in one snapshot
(freeze::early), so the slide redraws an image and the panel; a tap or
swipe up under it closes it and nothing under it takes a touch. Tiles are
two pages of four with dots; tiles restyle only when their state changes.
- Home: a touch that starts on the top layer (the quick panel, the status
bar) is not a page swipe -- a sideways drag of the brightness slider over
Home ended the drag and turned the page under it.
- Keyboard: OK and hide don't put the cursor back on a field whose keyboard
is gone.
- BotScreen: adminRowBox -> centerRow (the sim build broke in 3293ac09).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
- GPS: stop() resets the sky state so the 'Searching' timer does not run
while the receiver is off; the status page shows it only when GPS is on.
- L2 keyboard: put the FOCUSED state back after typing a key or picking a
variant, so the cursor is drawn again after characters like a-ogonek.
- Quick panel: drop the full-screen dim (a blend per frame), so the screen
below stays interactive; tiles are one sideways-scrolling, snapping row;
the brightness slider no longer animates and only updates the backlight
when the value changes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
versionNum() read "v2.0-rc1" as plain 2.0, so a device on a release
candidate never offered the release itself (nor a later candidate). A
"-rcN" suffix now orders before the bare version: v2.0-rc1 < v2.0-rc2 <
v2.0 < v2.0.1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/prefs holds a header (magic, format version, size, CRC-32), the node's
position and NodePrefs as it is in memory, in place of /new_prefs' two
hand-kept field lists and 0xC0DE00xx schema bumps. A new field goes at the
end of the struct; moving one bumps PREFS_VERSION. sanitize() keeps every
value in range.
The first boot after an update from before 2.0 imports only the first
block of the old file, laid out the same in upstream MeshCore and Solo
(name, position, radio, BLE PIN, scope), then deletes it; everything else
starts from the defaults. Contacts, channels, scopes, waypoints and trails
are untouched.
Gone: the page-order and GPS-interval migrations, the unused
trail_interval_idx / trail_units_idx / repeat_extra_scopes; fav_sort_off
and msg_wake_screen_off become fav_sort and msg_wake (on by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node detail: a card with a compass rose and the hop chain over the info;
the bar keeps Message / Admin / Add, Ping and Navigate, the rest goes to a
"More" group under the info (favourite toggled in place, delete by a second
tap). Nodes: an arrow by each distance. A trail's height profile in Map
tools and a saved trail's popup. Diagnostics > History: battery, noise,
SNR and traffic charts. Clock > Calendar: today, the weekend and alarm days.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The OLED gets the arrows towards nodes in Nodes and the Path row with its
hop rings in a stored node's detail (its position on one line to make the
room); no compass rose. Trail gets a height-profile view on both. The
Status history, trail profile and calendar come from ui-core. A sim hook
turns on the advert's position for tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The history of the noise floor, battery, traffic and SNR, a trail's height
profile (with a sampler for trails read point by point off the card) and a
month's calendar, moved out of ui-new so ui-lvgl can draw the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pmowandClaude Opus 5.5
JakubandGitHub